| dc2e0dc7 |
/* WARNING: This version also supports dopen for descriptor opening and
* is not compatible with the original version. -- T. Kojm
*
* libmspack -- a library for working with Microsoft compression formats.
* (C) 2003-2004 Stuart Caie <kyzer@4u.net>
*
* libmspack is free software; you can redistribute it and/or modify it under
* the terms of the GNU Lesser General Public License (LGPL) version 2.1
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/** \mainpage
*
* \section intro Introduction
*
* libmspack is a library which provides compressors and decompressors,
* archivers and dearchivers for Microsoft compression formats.
*
* \section formats Formats supported
*
* The following file formats are supported:
* - SZDD files, which use LZSS compression
* - KWAJ files, which use LZSS, LZSS+Huffman or deflate compression
* - .HLP (MS Help) files, which use LZSS compression
* - .CAB (MS Cabinet) files, which use deflate, LZX or Quantum compression
* - .CHM (HTML Help) files, which use LZX compression
* - .LIT (MS EBook) files, which use LZX compression and DES encryption
*
* To determine the capabilities of the library, and the binary
* compatibility version of any particular compressor or decompressor, use
* the mspack_version() function. The UNIX library interface version is
* defined as the highest-versioned library component.
*
* \section starting Getting started
*
* The macro MSPACK_SYS_SELFTEST() should be used to ensure the library can
* be used. In particular, it checks if the caller is using 32-bit file I/O
* when the library is compiled for 64-bit file I/O and vice versa.
*
* If compiled normally, the library includes basic file I/O and memory
* management functionality using the standard C library. This can be
* customised and replaced entirely by creating a mspack_system structure.
*
* A compressor or decompressor for the required format must be
* instantiated before it can be used. Each construction function takes
* one parameter, which is either a pointer to a custom mspack_system
* structure, or NULL to use the default. The instantiation returned, if
* not NULL, contains function pointers (methods) to work with the given
* file format.
*
* For compression:
* - mspack_create_cab_compressor() creates a mscab_compressor
* - mspack_create_chm_compressor() creates a mschm_compressor
* - mspack_create_lit_compressor() creates a mslit_compressor
* - mspack_create_hlp_compressor() creates a mshlp_compressor
* - mspack_create_szdd_compressor() creates a msszdd_compressor
* - mspack_create_kwaj_compressor() creates a mskwaj_compressor
*
* For decompression:
* - mspack_create_cab_decompressor() creates a mscab_decompressor
* - mspack_create_chm_decompressor() creates a mschm_decompressor
* - mspack_create_lit_decompressor() creates a mslit_decompressor
* - mspack_create_hlp_decompressor() creates a mshlp_decompressor
* - mspack_create_szdd_decompressor() creates a msszdd_decompressor
* - mspack_create_kwaj_decompressor() creates a mskwaj_decompressor
*
* Once finished working with a format, each kind of
* compressor/decompressor has its own specific destructor:
* - mspack_destroy_cab_compressor()
* - mspack_destroy_cab_decompressor()
* - mspack_destroy_chm_compressor()
* - mspack_destroy_chm_decompressor()
* - mspack_destroy_lit_compressor()
* - mspack_destroy_lit_decompressor()
* - mspack_destroy_hlp_compressor()
* - mspack_destroy_hlp_decompressor()
* - mspack_destroy_szdd_compressor()
* - mspack_destroy_szdd_decompressor()
* - mspack_destroy_kwaj_compressor()
* - mspack_destroy_kwaj_decompressor()
*
* Destroying a compressor or decompressor does not destroy any objects,
* structures or handles that have been created using that compressor or
* decompressor. Ensure that everything created or opened is destroyed or
* closed before compressor/decompressor is itself destroyed.
*
* \section errors Error codes
*
* All compressors and decompressors use the same set of error codes. Most
* methods return an error code directly. For methods which do not
* return error codes directly, the error code can be obtained with the
* last_error() method.
*
* - #MSPACK_ERR_OK is used to indicate success. This error code is defined
* as zero, all other code are non-zero.
* - #MSPACK_ERR_ARGS indicates that a method was called with inappropriate
* arguments.
* - #MSPACK_ERR_OPEN indicates that mspack_system::open() failed.
* - #MSPACK_ERR_READ indicates that mspack_system::read() failed.
* - #MSPACK_ERR_WRITE indicates that mspack_system::write() failed.
* - #MSPACK_ERR_SEEK indicates that mspack_system::seek() failed.
* - #MSPACK_ERR_NOMEMORY indicates that mspack_system::alloc() failed.
* - #MSPACK_ERR_SIGNATURE indicates that the file being read does not
* have the correct "signature". It is probably not a valid file for
* whatever format is being read.
* - #MSPACK_ERR_DATAFORMAT indicates that the file being used or read
* is corrupt.
* - #MSPACK_ERR_CHECKSUM indicates that a data checksum has failed.
* - #MSPACK_ERR_CRUNCH indicates an error occured during compression.
* - #MSPACK_ERR_DECRUNCH indicates an error occured during decompression.
*/
#ifndef LIB_MSPACK_H
#define LIB_MSPACK_H 1
#ifdef __cplusplus
extern "C" {
#endif
#include <sys/types.h>
#include <unistd.h>
/**
* System self-test function, to ensure both library and calling program
* can use one another.
*
* A result of MSPACK_ERR_OK means the library and caller are
* compatible. Any other result indicates that the library and caller are
* not compatible and should not be used. In particular, a value of
* MSPACK_ERR_SEEK means the library and caller use different off_t
* datatypes.
*
* It should be used like so:
*
* @code
* int selftest_result;
* MSPACK_SYS_SELFTEST(selftest_result);
* if (selftest_result != MSPACK_ERR_OK) {
* fprintf(stderr, "incompatible with this build of libmspack\n");
* exit(0);
* }
* @endcode
*
* @param result an int variable to store the result of the self-test
*/
#define MSPACK_SYS_SELFTEST(result) do { \
(result) = mspack_sys_selftest_internal(sizeof(off_t)); \
} while (0)
/** Part of the MSPACK_SYS_SELFTEST() macro, must not be used directly. */
extern int mspack_sys_selftest_internal(int);
/**
* Enquire about the binary compatibility version of a specific interface in
* the library. Currently, the following interfaces are defined:
*
* - #MSPACK_VER_LIBRARY: the overall library
* - #MSPACK_VER_SYSTEM: the mspack_system interface
* - #MSPACK_VER_MSCABD: the mscab_decompressor interface
* - #MSPACK_VER_MSCABC: the mscab_compressor interface
* - #MSPACK_VER_MSCHMD: the mschm_decompressor interface
* - #MSPACK_VER_MSCHMC: the mschm_compressor interface
* - #MSPACK_VER_MSLITD: the mslit_decompressor interface
* - #MSPACK_VER_MSLITC: the mslit_compressor interface
* - #MSPACK_VER_MSHLPD: the mshlp_decompressor interface
* - #MSPACK_VER_MSHLPC: the mshlp_compressor interface
* - #MSPACK_VER_MSSZDDD: the msszdd_decompressor interface
* - #MSPACK_VER_MSSZDDC: the msszdd_compressor interface
* - #MSPACK_VER_MSKWAJD: the mskwaj_decompressor interface
* - #MSPACK_VER_MSKWAJC: the mskwaj_compressor interface
*
* The result of the function should be interpreted as follows:
* - -1: this interface is completely unknown to the library
* - 0: this interface is known, but non-functioning
* - 1: this interface has all basic functionality
* - 2, 3, ...: this interface has additional functionality, clearly marked
* in the documentation as "version 2", "version 3" and so on.
*
* @param interface the interface to request current version of
* @return the version of the requested interface
*/
extern int mspack_version(int interface);
/** Pass to mspack_version() to get the overall library version */
#define MSPACK_VER_LIBRARY (0)
/** Pass to mspack_version() to get the mspack_system version */
#define MSPACK_VER_SYSTEM (1)
/** Pass to mspack_version() to get the mscab_decompressor version */
#define MSPACK_VER_MSCABD (2)
/** Pass to mspack_version() to get the mscab_compressor version */
#define MSPACK_VER_MSCABC (3)
/** Pass to mspack_version() to get the mschm_decompressor version */
#define MSPACK_VER_MSCHMD (4)
/** Pass to mspack_version() to get the mschm_compressor version */
#define MSPACK_VER_MSCHMC (5)
/** Pass to mspack_version() to get the mslit_decompressor version */
#define MSPACK_VER_MSLITD (6)
/** Pass to mspack_version() to get the mslit_compressor version */
#define MSPACK_VER_MSLITC (7)
/** Pass to mspack_version() to get the mshlp_decompressor version */
#define MSPACK_VER_MSHLPD (8)
/** Pass to mspack_version() to get the mshlp_compressor version */
#define MSPACK_VER_MSHLPC (9)
/** Pass to mspack_version() to get the msszdd_decompressor version */
#define MSPACK_VER_MSSZDDD (10)
/** Pass to mspack_version() to get the msszdd_compressor version */
#define MSPACK_VER_MSSZDDC (11)
/** Pass to mspack_version() to get the mskwaj_decompressor version */
#define MSPACK_VER_MSKWAJD (12)
/** Pass to mspack_version() to get the mskwaj_compressor version */
#define MSPACK_VER_MSKWAJC (13)
/* --- file I/O abstraction ------------------------------------------------ */
/**
* A structure which abstracts file I/O and memory management.
*
* The library always uses the mspack_system structure for interaction
* with the file system and to allocate, free and copy all memory. It also
* uses it to send literal messages to the library user.
*
* When the library is compiled normally, passing NULL to a compressor or
* decompressor constructor will result in a default mspack_system being
* used, where all methods are implemented with the standard C library.
* However, all constructors support being given a custom created
* mspack_system structure, with the library user's own methods. This
* allows for more abstract interaction, such as reading and writing files
* directly to memory, or from a network socket or pipe.
*
* Implementors of an mspack_system structure should read all
* documentation entries for every structure member, and write methods
* which conform to those standards.
*/
struct mspack_system {
/**
* Opens a file for reading, writing, appending or updating.
*
* @param this a self-referential pointer to the mspack_system
* structure whose open() method is being called. If
* this pointer is required by close(), read(), write(),
* seek() or tell(), it should be stored in the result
* structure at this time.
* @param filename the file to be opened. It is passed directly from the
* library caller without being modified, so it is up to
* the caller what this parameter actually represents.
* @param mode one of #MSPACK_SYS_OPEN_READ (open an existing file
* for reading), #MSPACK_SYS_OPEN_WRITE (open a new file
* for writing), #MSPACK_SYS_OPEN_UPDATE (open an existing
* file for reading/writing from the start of the file) or
* #MSPACK_SYS_OPEN_APPEND (open an existing file for
* reading/writing from the end of the file)
* @return a pointer to a mspack_file structure. This structure officially
* contains no members, its true contents are up to the
* mspack_system implementor. It should contain whatever is needed
* for other mspack_system methods to operate.
* @see close(), read(), write(), seek(), tell(), message()
*/
struct mspack_file * (*open)(struct mspack_system *this,
char *filename,
int mode);
struct mspack_file * (*dopen)(struct mspack_system *this,
int desc,
int mode);
/**
* Closes a previously opened file. If any memory was allocated for this
* particular file handle, it should be freed at this time.
*
* @param file the file to close
* @see open()
*/
void (*close)(struct mspack_file *file);
/**
* Reads a given number of bytes from an open file.
*
* @param file the file to read from
* @param buffer the location where the read bytes should be stored
* @param bytes the number of bytes to read from the file.
* @return the number of bytes successfully read (this can be less than
* the number requested), zero to mark the end of file, or less
* than zero to indicate an error.
* @see open(), write()
*/
int (*read)(struct mspack_file *file,
void *buffer,
int bytes);
/**
* Writes a given number of bytes to an open file.
*
* @param file the file to write to
* @param buffer the location where the written bytes should be read from
* @param bytes the number of bytes to write to the file.
* @return the number of bytes successfully written, this can be less
* than the number requested. Zero or less can indicate an error
* where no bytes at all could be written. All cases where less
* bytes were written than requested are considered by the library
* to be an error.
* @see open(), read()
*/
int (*write)(struct mspack_file *file,
void *buffer,
int bytes);
/**
* Seeks to a specific file offset within an open file.
*
* Sometimes the library needs to know the length of a file. It does
* this by seeking to the end of the file with seek(file, 0,
* MSPACK_SYS_SEEK_END), then calling tell(). Implementations may want
* to make a special case for this.
*
* Due to the potentially varying 32/64 bit datatype off_t on some
* architectures, the #MSPACK_SYS_SELFTEST macro MUST be used before
* using the library. If not, the error caused by the library passing an
* inappropriate stackframe to seek() is subtle and hard to trace.
*
* @param file the file to be seeked
* @param offset an offset to seek, measured in bytes
* @param mode one of #MSPACK_SYS_SEEK_START (the offset should be
* measured from the start of the file), #MSPACK_SYS_SEEK_CUR
* (the offset should be measured from the current file offset)
* or #MSPACK_SYS_SEEK_END (the offset should be measured from
* the end of the file)
* @return zero for success, non-zero for an error
* @see open(), tell()
*/
int (*seek)(struct mspack_file *file,
off_t offset,
int mode);
/**
* Returns the current file position (in bytes) of the given file.
*
* @param file the file whose file position is wanted
* @return the current file position of the file
* @see open(), seek()
*/
off_t (*tell)(struct mspack_file *file);
/**
* Used to send messages from the library to the user.
*
* Occasionally, the library generates warnings or other messages in
* plain english to inform the human user. These are informational only
* and can be ignored if not wanted.
*
* @param file may be a file handle returned from open() if this message
* pertains to a specific open file, or NULL if not related to
* a specific file.
* @param format a printf() style format string. It does NOT include a
* trailing newline.
* @see open()
*/
void (*message)(struct mspack_file *file,
char *format,
...);
/**
* Allocates memory.
*
* @param this a self-referential pointer to the mspack_system
* structure whose alloc() method is being called.
* @param bytes the number of bytes to allocate
* @result a pointer to the requested number of bytes, or NULL if
* not enough memory is available
* @see free()
*/
void * (*alloc)(struct mspack_system *this,
size_t bytes);
/**
* Frees memory.
*
* @param ptr the memory to be freed.
* @see alloc()
*/
void (*free)(void *ptr);
/**
* Copies from one region of memory to another.
*
* The regions of memory are guaranteed not to overlap, are usually less
* than 256 bytes, and may not be aligned. Please note that the source
* parameter comes before the destination parameter, unlike the standard
* C function memcpy().
*
* @param src the region of memory to copy from
* @param dest the region of memory to copy to
* @param bytes the size of the memory region, in bytes
*/
void (*copy)(void *src,
void *dest,
size_t bytes);
/**
* A null pointer to mark the end of mspack_system. It must equal NULL.
*
* Should the mspack_system structure extend in the future, this NULL
* will be seen, rather than have an invalid method pointer called.
*/
void *null_ptr;
};
/** mspack_system::open() mode: open existing file for reading. */
#define MSPACK_SYS_OPEN_READ (0)
/** mspack_system::open() mode: open new file for writing */
#define MSPACK_SYS_OPEN_WRITE (1)
/** mspack_system::open() mode: open existing file for writing */
#define MSPACK_SYS_OPEN_UPDATE (2)
/** mspack_system::open() mode: open existing file for writing */
#define MSPACK_SYS_OPEN_APPEND (3)
/** mspack_system::seek() mode: seek relative to start of file */
#define MSPACK_SYS_SEEK_START (0)
/** mspack_system::seek() mode: seek relative to current offset */
#define MSPACK_SYS_SEEK_CUR (1)
/** mspack_system::seek() mode: seek relative to end of file */
#define MSPACK_SYS_SEEK_END (2)
/**
* A structure which represents an open file handle. The contents of this
* structure are determined by the implementation of the
* mspack_system::open() method.
*/
struct mspack_file {
int dummy;
};
/* --- error codes --------------------------------------------------------- */
/** Error code: no error */
#define MSPACK_ERR_OK (0)
/** Error code: bad arguments to method */
#define MSPACK_ERR_ARGS (1)
/** Error code: error opening file */
#define MSPACK_ERR_OPEN (2)
/** Error code: error reading file */
#define MSPACK_ERR_READ (3)
/** Error code: error writing file */
#define MSPACK_ERR_WRITE (4)
/** Error code: seek error */
#define MSPACK_ERR_SEEK (5)
/** Error code: out of memory */
#define MSPACK_ERR_NOMEMORY (6)
/** Error code: bad "magic id" in file */
#define MSPACK_ERR_SIGNATURE (7)
/** Error code: bad or corrupt file format */
#define MSPACK_ERR_DATAFORMAT (8)
/** Error code: bad checksum or CRC */
#define MSPACK_ERR_CHECKSUM (9)
/** Error code: error during compression */
#define MSPACK_ERR_CRUNCH (10)
/** Error code: error during decompression */
#define MSPACK_ERR_DECRUNCH (11)
/* --- functions available in library -------------------------------------- */
/** Creates a new CAB compressor.
* @param sys a custom mspack_system structure, or NULL to use the default
* @return a #mscab_compressor or NULL
*/
extern struct mscab_compressor *
mspack_create_cab_compressor(struct mspack_system *sys);
/** Creates a new CAB decompressor.
* @param sys a custom mspack_system structure, or NULL to use the default
* @return a #mscab_decompressor or NULL
*/
extern struct mscab_decompressor *
mspack_create_cab_decompressor(struct mspack_system *sys);
/** Destroys an existing CAB compressor.
* @param this the #mscab_compressor to destroy
*/
extern void mspack_destroy_cab_compressor(struct mscab_compressor *this);
/** Destroys an existing CAB decompressor.
* @param this the #mscab_decompressor to destroy
*/
extern void mspack_destroy_cab_decompressor(struct mscab_decompressor *this);
/** Creates a new CHM compressor.
* @param sys a custom mspack_system structure, or NULL to use the default
* @return a #mschm_compressor or NULL
*/
extern struct mschm_compressor *
mspack_create_chm_compressor(struct mspack_system *sys);
/** Creates a new CHM decompressor.
* @param sys a custom mspack_system structure, or NULL to use the default
* @return a #mschm_decompressor or NULL
*/
extern struct mschm_decompressor *
mspack_create_chm_decompressor(struct mspack_system *sys);
/** Destroys an existing CHM compressor.
* @param this the #mschm_compressor to destroy
*/
extern void mspack_destroy_chm_compressor(struct mschm_compressor *this);
/** Destroys an existing CHM decompressor.
* @param this the #mschm_decompressor to destroy
*/
extern void mspack_destroy_chm_decompressor(struct mschm_decompressor *this);
/** Creates a new LIT compressor.
* @param sys a custom mspack_system structure, or NULL to use the default
* @return a #mslit_compressor or NULL
*/
extern struct mslit_compressor *
mspack_create_lit_compressor(struct mspack_system *sys);
/** Creates a new LIT decompressor.
* @param sys a custom mspack_system structure, or NULL to use the default
* @return a #mslit_decompressor or NULL
*/
extern struct mslit_decompressor *
mspack_create_lit_decompressor(struct mspack_system *sys);
/** Destroys an existing LIT compressor.
* @param this the #mslit_compressor to destroy
*/
extern void mspack_destroy_lit_compressor(struct mslit_compressor *this);
/** Destroys an existing LIT decompressor.
* @param this the #mslit_decompressor to destroy
*/
extern void mspack_destroy_lit_decompressor(struct mslit_decompressor *this);
/** Creates a new HLP compressor.
* @param sys a custom mspack_system structure, or NULL to use the default
* @return a #mshlp_compressor or NULL
*/
extern struct mshlp_compressor *
mspack_create_hlp_compressor(struct mspack_system *sys);
/** Creates a new HLP decompressor.
* @param sys a custom mspack_system structure, or NULL to use the default
* @return a #mshlp_decompressor or NULL
*/
extern struct mshlp_decompressor *
mspack_create_hlp_decompressor(struct mspack_system *sys);
/** Destroys an existing hlp compressor.
* @param this the #mshlp_compressor to destroy
*/
extern void mspack_destroy_hlp_compressor(struct mshlp_compressor *this);
/** Destroys an existing hlp decompressor.
* @param this the #mshlp_decompressor to destroy
*/
extern void mspack_destroy_hlp_decompressor(struct mshlp_decompressor *this);
/** Creates a new SZDD compressor.
* @param sys a custom mspack_system structure, or NULL to use the default
* @return a #msszdd_compressor or NULL
*/
extern struct msszdd_compressor *
mspack_create_szdd_compressor(struct mspack_system *sys);
/** Creates a new SZDD decompressor.
* @param sys a custom mspack_system structure, or NULL to use the default
* @return a #msszdd_decompressor or NULL
*/
extern struct msszdd_decompressor *
mspack_create_szdd_decompressor(struct mspack_system *sys);
/** Destroys an existing SZDD compressor.
* @param this the #msszdd_compressor to destroy
*/
extern void mspack_destroy_szdd_compressor(struct msszdd_compressor *this);
/** Destroys an existing SZDD decompressor.
* @param this the #msszdd_decompressor to destroy
*/
extern void mspack_destroy_szdd_decompressor(struct msszdd_decompressor *this);
/** Creates a new KWAJ compressor.
* @param sys a custom mspack_system structure, or NULL to use the default
* @return a #mskwaj_compressor or NULL
*/
extern struct mskwaj_compressor *
mspack_create_kwaj_compressor(struct mspack_system *sys);
/** Creates a new KWAJ decompressor.
* @param sys a custom mspack_system structure, or NULL to use the default
* @return a #mskwaj_decompressor or NULL
*/
extern struct mskwaj_decompressor *
mspack_create_kwaj_decompressor(struct mspack_system *sys);
/** Destroys an existing KWAJ compressor.
* @param this the #mskwaj_compressor to destroy
*/
extern void mspack_destroy_kwaj_compressor(struct mskwaj_compressor *this);
/** Destroys an existing KWAJ decompressor.
* @param this the #mskwaj_decompressor to destroy
*/
extern void mspack_destroy_kwaj_decompressor(struct mskwaj_decompressor *this);
/* --- support for .CAB (MS Cabinet) file format --------------------------- */
/**
* A structure which represents a single cabinet file.
*
* All fields are READ ONLY.
*
* If this cabinet is part of a merged cabinet set, the #files and #folders
* fields are common to all cabinets in the set, and will be identical.
*
* @see mscab_decompressor::open(), mscab_decompressor::close(),
* mscab_decompressor::search()
*/
struct mscabd_cabinet {
/**
* The next cabinet in a chained list, if this cabinet was opened with
* mscab_decompressor::search(). May be NULL to mark the end of the
* list.
*/
struct mscabd_cabinet *next;
/**
* The filename of the cabinet. More correctly, the filename of the
* physical file that the cabinet resides in. This is given by the
* library user and may be in any format.
*/
char *filename;
int desc;
/** The file offset of cabinet within the physical file it resides in. */
off_t base_offset;
/** The length of the cabinet file in bytes. */
unsigned int length;
/** The previous cabinet in a cabinet set, or NULL. */
struct mscabd_cabinet *prevcab;
/** The next cabinet in a cabinet set, or NULL. */
struct mscabd_cabinet *nextcab;
/** The filename of the previous cabinet in a cabinet set, or NULL. */
char *prevname;
/** The filename of the next cabinet in a cabinet set, or NULL. */
char *nextname;
/** The name of the disk containing the previous cabinet in a cabinet
* set, or NULL.
*/
char *previnfo;
/** The name of the disk containing the next cabinet in a cabinet set,
* or NULL.
*/
char *nextinfo;
/** A list of all files in the cabinet or cabinet set. */
struct mscabd_file *files;
/** A list of all folders in the cabinet or cabinet set. */
struct mscabd_folder *folders;
/**
* The set ID of the cabinet. All cabinets in the same set should have
* the same set ID.
*/
unsigned short set_id;
/**
* The index number of the cabinet within the set. Numbering should
* start from 0 for the first cabinet in the set, and increment by 1 for
* each following cabinet.
*/
unsigned short set_index;
/**
* The number of bytes reserved in the header area of the cabinet.
*
* If this is non-zero and flags has MSCAB_HDR_RESV set, this data can
* be read by the calling application. It is of the given length,
* located at offset (base_offset + MSCAB_HDR_RESV_OFFSET) in the
* cabinet file.
*
* @see flags
*/
unsigned short header_resv;
/**
* Header flags.
*
* - MSCAB_HDR_PREVCAB indicates the cabinet is part of a cabinet set, and
* has a predecessor cabinet.
* - MSCAB_HDR_NEXTCAB indicates the cabinet is part of a cabinet set, and
* has a successor cabinet.
* - MSCAB_HDR_RESV indicates the cabinet has reserved header space.
*
* @see prevname, previnfo, nextname, nextinfo, header_resv
*/
int flags;
};
/** Offset from start of cabinet to the reserved header data (if present). */
#define MSCAB_HDR_RESV_OFFSET (0x28)
/** Cabinet header flag: cabinet has a predecessor */
#define MSCAB_HDR_PREVCAB (0x01)
/** Cabinet header flag: cabinet has a successor */
#define MSCAB_HDR_NEXTCAB (0x02)
/** Cabinet header flag: cabinet has reserved header space */
#define MSCAB_HDR_RESV (0x04)
/**
* A structure which represents a single folder in a cabinet or cabinet set.
*
* All fields are READ ONLY.
*
* A folder is a single compressed stream of data. When uncompressed, it
* holds the data of one or more files. A folder may be split across more
* than one cabinet.
*/
struct mscabd_folder {
/**
* A pointer to the next folder in this cabinet or cabinet set, or NULL
* if this is the final folder.
*/
struct mscabd_folder *next;
/**
* The compression format used by this folder.
*
* The macro MSCABD_COMP_METHOD() should be used on this field to get
* the algorithm used. The macro MSCABD_COMP_LEVEL() should be used to get
* the "compression level".
*
* @see MSCABD_COMP_METHOD(), MSCABD_COMP_LEVEL()
*/
int comp_type;
/**
* The total number of data blocks used by this folder. This includes
* data blocks present in other files, if this folder spans more than
* one cabinet.
*/
unsigned int num_blocks;
};
/**
* Returns the compression method used by a folder.
*
* @param comp_type a mscabd_folder::comp_type value
* @return one of #MSCAB_COMP_NONE, #MSCAB_COMP_MSZIP, #MSCAB_COMP_QUANTUM
* or #MSCAB_COMP_LZX
*/
#define MSCABD_COMP_METHOD(comp_type) ((comp_type) & 0x0F)
/**
* Returns the compression level used by a folder.
*
* @param comp_type a mscabd_folder::comp_type value
* @return the compression level. This is only defined by LZX and Quantum
* compression
*/
#define MSCABD_COMP_LEVEL(comp_type) (((comp_type) >> 8) & 0x1F)
/** Compression mode: no compression. */
#define MSCAB_COMP_NONE (0)
/** Compression mode: MSZIP (deflate) compression. */
#define MSCAB_COMP_MSZIP (1)
/** Compression mode: Quantum compression */
#define MSCAB_COMP_QUANTUM (2)
/** Compression mode: LZX compression */
#define MSCAB_COMP_LZX (3)
/**
* A structure which represents a single file in a cabinet or cabinet set.
*
* All fields are READ ONLY.
*/
struct mscabd_file {
/**
* The next file in the cabinet or cabinet set, or NULL if this is the
* final file.
*/
struct mscabd_file *next;
/**
* The filename of the file.
*
* A null terminated string of up to 255 bytes in length, it may be in
* either ISO-8859-1 or UTF8 format, depending on the file attributes.
*
* @see attribs
*/
char *filename;
/** The uncompressed length of the file, in bytes. */
unsigned int length;
/**
* File attributes.
*
* The following attributes are defined:
* - #MSCAB_ATTRIB_RDONLY indicates the file is write protected.
* - #MSCAB_ATTRIB_HIDDEN indicates the file is hidden.
* - #MSCAB_ATTRIB_SYSTEM indicates the file is a operating system file.
* - #MSCAB_ATTRIB_ARCH indicates the file is "archived".
* - #MSCAB_ATTRIB_EXEC indicates the file is an executable program.
* - #MSCAB_ATTRIB_UTF_NAME indicates the filename is in UTF8 format rather
* than ISO-8859-1.
*/
int attribs;
/** File's last modified time, hour field. */
char time_h;
/** File's last modified time, minute field. */
char time_m;
/** File's last modified time, second field. */
char time_s;
/** File's last modified date, day field. */
char date_d;
/** File's last modified date, month field. */
char date_m;
/** File's last modified date, year field. */
int date_y;
/** A pointer to the folder that contains this file. */
struct mscabd_folder *folder;
/** The uncompressed offset of this file in its folder. */
unsigned int offset;
};
/** mscabd_file::attribs attribute: file is read-only. */
#define MSCAB_ATTRIB_RDONLY (0x01)
/** mscabd_file::attribs attribute: file is hidden. */
#define MSCAB_ATTRIB_HIDDEN (0x02)
/** mscabd_file::attribs attribute: file is an operating system file. */
#define MSCAB_ATTRIB_SYSTEM (0x04)
/** mscabd_file::attribs attribute: file is "archived". */
#define MSCAB_ATTRIB_ARCH (0x20)
/** mscabd_file::attribs attribute: file is an executable program. */
#define MSCAB_ATTRIB_EXEC (0x40)
/** mscabd_file::attribs attribute: filename is UTF8, not ISO-8859-1. */
#define MSCAB_ATTRIB_UTF_NAME (0x80)
/** mscab_decompressor::set_param() parameter: search buffer size. */
#define MSCABD_PARAM_SEARCHBUF (0)
/** mscab_decompressor::set_param() parameter: repair MS-ZIP streams? */
#define MSCABD_PARAM_FIXMSZIP (1)
/** mscab_decompressor::set_param() parameter: size of decompression buffer */
#define MSCABD_PARAM_DECOMPBUF (2)
/** TODO */
struct mscab_compressor {
int dummy;
};
/**
* A decompressor for .CAB (Microsoft Cabinet) files
*
* All fields are READ ONLY.
*
* @see mspack_create_cab_decompressor(), mspack_destroy_cab_decompressor()
*/
struct mscab_decompressor {
/**
* Opens a cabinet file and reads its contents.
*
* If the file opened is a valid cabinet file, all headers will be read
* and a mscabd_cabinet structure will be returned, with a full list of
* folders and files.
*
* In the case of an error occuring, NULL is returned and the error code
* is available from last_error().
*
* The filename pointer should be considered "in use" until close() is
* called on the cabinet.
*
* @param this a self-referential pointer to the mscab_decompressor
* instance being called
* @param filename the filename of the cabinet file. This is passed
* directly to mspack_system::open().
* @return a pointer to a mscabd_cabinet structure, or NULL on failure
* @see close(), search(), last_error()
*/
struct mscabd_cabinet * (*open) (struct mscab_decompressor *this,
char *filename);
struct mscabd_cabinet * (*dopen) (struct mscab_decompressor *this,
int desc);
/**
* Closes a previously opened cabinet or cabinet set.
*
* This closes a cabinet, all cabinets associated with it via the
* mscabd_cabinet::next, mscabd_cabinet::prevcab and
* mscabd_cabinet::nextcab pointers, and all folders and files. All
* memory used by these entities is freed.
*
* The cabinet pointer is now invalid and cannot be used again. All
* mscabd_folder and mscabd_file pointers from that cabinet or cabinet
* set are also now invalid, and cannot be used again.
*
* If the cabinet pointer given was created using search(), it MUST be
* the cabinet pointer returned by search() and not one of the later
* cabinet pointers further along the mscabd_cabinet::next chain.
* If extra cabinets have been added using append() or prepend(), these
* will all be freed, even if the cabinet pointer given is not the first
* cabinet in the set. Do NOT close() more than one cabinet in the set.
*
* The mscabd_cabinet::filename is not freed by the library, as it is
* not allocated by the library. The caller should free this itself if
* necessary, before it is lost forever.
*
* @param this a self-referential pointer to the mscab_decompressor
* instance being called
* @param cab the cabinet to close
* @see open(), search(), append(), prepend()
*/
void (*close)(struct mscab_decompressor *this,
struct mscabd_cabinet *cab);
/**
* Searches a regular file for embedded cabinets.
*
* This opens a normal file with the given filename and will search the
* entire file for embedded cabinet files
*
* If any cabinets are found, the equivalent of open() is called on each
* potential cabinet file at the offset it was found. All successfully
* open()ed cabinets are kept in a list.
*
* The first cabinet found will be returned directly as the result of
* this method. Any further cabinets found will be chained in a list
* using the mscabd_cabinet::next field.
*
* In the case of an error occuring anywhere other than the simulated
* open(), NULL is returned and the error code is available from
* last_error().
*
* If no error occurs, but no cabinets can be found in the file, NULL is
* returned and last_error() returns MSPACK_ERR_OK.
*
* The filename pointer should be considered in use until close() is
* called on the cabinet.
*
* close() should only be called on the result of search(), not on any
* subsequent cabinets in the mscabd_cabinet::next chain.
*
* @param this a self-referential pointer to the mscab_decompressor
* instance being called
* @param filename the filename of the file to search for cabinets. This
* is passed directly to mspack_system::open().
* @return a pointer to a mscabd_cabinet structure, or NULL
* @see close(), open(), last_error()
*/
struct mscabd_cabinet * (*search) (struct mscab_decompressor *this,
char *filename);
struct mscabd_cabinet * (*dsearch) (struct mscab_decompressor *this,
int desc);
/**
* Appends one mscabd_cabinet to another, forming or extending a cabinet
* set.
*
* This will attempt to append one cabinet to another such that
* <tt>(cab->nextcab == nextcab) && (nextcab->prevcab == cab)</tt> and
* any folders split between the two cabinets are merged.
*
* The cabinets MUST be part of a cabinet set -- a cabinet set is a
* cabinet that spans more than one physical cabinet file on disk -- and
* must be appropriately matched.
*
* It can be determined if a cabinet has further parts to load by
* examining the mscabd_cabinet::flags field:
*
* - if <tt>(flags & MSCAB_HDR_PREVCAB)</tt> is non-zero, there is a
* predecessor cabinet to open() and prepend(). Its MS-DOS
* case-insensitive filename is mscabd_cabinet::prevname
* - if <tt>(flags & MSCAB_HDR_NEXTCAB)</tt> is non-zero, there is a
* successor cabinet to open() and append(). Its MS-DOS case-insensitive
* filename is mscabd_cabinet::nextname
*
* If the cabinets do not match, an error code will be returned. Neither
* cabinet has been altered, and both should be closed seperately.
*
* Files and folders in a cabinet set are a single entity. All cabinets
* in a set use the same file list, which is updated as cabinets in the
* set are added. All pointers to mscabd_folder and mscabd_file
* structures in either cabinet must be discarded and re-obtained after
* merging.
*
* @param this a self-referential pointer to the mscab_decompressor
* instance being called
* @param cab the cabinet which will be appended to,
* predecessor of nextcab
* @param nextcab the cabinet which will be appended,
* successor of cab
* @return an error code, or MSPACK_ERR_OK if successful
* @see prepend(), open(), close()
*/
int (*append) (struct mscab_decompressor *this,
struct mscabd_cabinet *cab,
struct mscabd_cabinet *nextcab);
/**
* Prepends one mscabd_cabinet to another, forming or extending a
* cabinet set.
*
* This will attempt to prepend one cabinet to another, such that
* <tt>(cab->prevcab == prevcab) && (prevcab->nextcab == cab)</tt>. In
* all other respects, it is identical to append(). See append() for the
* full documentation.
*
* @param this a self-referential pointer to the mscab_decompressor
* instance being called
* @param cab the cabinet which will be prepended to,
* successor of prevcab
* @param prevcab the cabinet which will be prepended,
* predecessor of cab
* @return an error code, or MSPACK_ERR_OK if successful
* @see append(), open(), close()
*/
int (*prepend) (struct mscab_decompressor *this,
struct mscabd_cabinet *cab,
struct mscabd_cabinet *prevcab);
/**
* Extracts a file from a cabinet or cabinet set.
*
* This extracts a compressed file in a cabinet and writes it to the given
* filename.
*
* The MS-DOS filename of the file, mscabd_file::filename, is NOT USED
* by extract(). The caller must examine this MS-DOS filename, copy and
* change it as necessary, create directories as necessary, and provide
* the correct filename as a parameter, which will be passed unchanged
* to the decompressor's mspack_system::open()
*
* If the file belongs to a split folder in a multi-part cabinet set,
* and not enough parts of the cabinet set have been loaded and appended
* or prepended, an error will be returned immediately.
*
* @param this a self-referential pointer to the mscab_decompressor
* instance being called
* @param file the file to be decompressed
* @param filename the filename of the file being written to
* @return an error code, or MSPACK_ERR_OK if successful
*/
int (*extract)(struct mscab_decompressor *this,
struct mscabd_file *file,
char *filename);
/**
* Sets a CAB decompression engine parameter.
*
* The following parameters are defined:
* - #MSCABD_PARAM_SEARCHBUF: How many bytes should be allocated as a
* buffer when using search()? The minimum value is 4. The default
* value is 32768.
* - #MSCABD_PARAM_FIXMSZIP: If non-zero, extract() will ignore bad
* checksums and recover from decompression errors in MS-ZIP
* compressed folders. The default value is 0 (don't recover).
* - #MSCABD_PARAM_DECOMPBUF: How many bytes should be used as an input
* bit buffer by decompressors? The minimum value is 4. The default
* value is 4096.
*
* @param this a self-referential pointer to the mscab_decompressor
* instance being called
* @param param the parameter to set
* @param value the value to set the parameter to
* @return MSPACK_ERR_OK if all is OK, or MSPACK_ERR_ARGS if there
* is a problem with either parameter or value.
* @see search(), extract()
*/
int (*set_param)(struct mscab_decompressor *this,
int param,
int value);
/**
* Returns the error code set by the most recently called method.
*
* This is useful for open() and search(), which do not return an error
* code directly.
*
* @param this a self-referential pointer to the mscab_decompressor
* instance being called
* @return the most recent error code
* @see open(), search()
*/
int (*last_error)(struct mscab_decompressor *);
};
/* --- support for .CHM (HTMLHelp) file format ----------------------------- */
/**
* A structure which represents a section of a CHM helpfile.
*
* All fields are READ ONLY.
*
* Not used directly, but used as a generic base type for
* mschmd_sec_uncompressed and mschmd_sec_mscompressed.
*/
struct mschmd_section {
/** A pointer to the CHM helpfile that contains this section. */
struct mschmd_header *chm;
/**
* The section ID. Either 0 for the uncompressed section
* mschmd_sec_uncompressed, or 1 for the LZX compressed section
* mschmd_sec_mscompressed. No other section IDs are known.
*/
unsigned int id;
};
/**
* A structure which represents the uncompressed section of a CHM helpfile.
*
* All fields are READ ONLY.
*/
struct mschmd_sec_uncompressed {
/** Generic section data. */
struct mschmd_section base;
/** The file offset of where this section begins in the CHM helpfile. */
off_t offset;
};
/**
* A structure which represents the compressed section of a CHM helpfile.
*
* All fields are READ ONLY.
*/
struct mschmd_sec_mscompressed {
/** Generic section data. */
struct mschmd_section base;
/** A pointer to the meta-file which represents all LZX compressed data. */
struct mschmd_file *content;
/** A pointer to the file which contains the LZX control data. */
struct mschmd_file *control;
/** A pointer to the file which contains the LZX reset table. */
struct mschmd_file *rtable;
};
/**
* A structure which represents a CHM helpfile.
*
* All fields are READ ONLY.
*/
struct mschmd_header {
/** The version of the CHM file format used in this file. */
unsigned int version;
/**
* The "timestamp" of the CHM helpfile.
*
* It is the lower 32 bits of a 64-bit value representing the number of
* centiseconds since 1601-01-01 00:00:00 UTC, plus 42. It is not useful
* as a timestamp, but it is useful as a semi-unique ID.
*/
unsigned int timestamp;
/**
* The default Language and Country ID (LCID) of the user who ran the
* HTMLHelp Compiler. This is not the language of the CHM file itself.
*/
unsigned int language;
/**
* The filename of the CHM helpfile. This is given by the library user
* and may be in any format.
*/
char *filename;
/** The length of the CHM helpfile, in bytes. */
off_t length;
/** A list of all non-system files in the CHM helpfile. */
struct mschmd_file *files;
/**
* A list of all system files in the CHM helpfile.
*
* System files are files which begin with "::". They are meta-files
* generated by the CHM creation process.
*/
struct mschmd_file *sysfiles;
/** The section 0 (uncompressed) data in this CHM helpfile. */
struct mschmd_sec_uncompressed sec0;
/** The section 1 (MSCompressed) data in this CHM helpfile. */
struct mschmd_sec_mscompressed sec1;
/** The file offset of the first PMGL/PMGI directory chunk. */
off_t dir_offset;
/** The number of PMGL/PMGI directory chunks in this CHM helpfile. */
unsigned int num_chunks;
/** The size of each PMGL/PMGI chunk, in bytes. */
unsigned int chunk_size;
/** The "density" of the quick-reference section in PMGL/PMGI chunks. */
unsigned int density;
/** The depth of the index tree.
*
* - if 1, there are no PMGI chunks, only PMGL chunks.
* - if 2, there is 1 PMGI chunk. All chunk indices point to PMGL chunks.
* - if 3, the root PMGI chunk points to secondary PMGI chunks, which in
* turn point to PMGL chunks.
* - and so on...
*/
unsigned int depth;
/**
* The number of the root PGMI chunk.
*
* If there is no index in the CHM helpfile, this will be 0xFFFFFFFF.
*/
unsigned int index_root;
};
/**
* A structure which represents a file stored in a CHM helpfile.
*
* All fields are READ ONLY.
*/
struct mschmd_file {
/**
* A pointer to the next file in the list, or NULL if this is the final
* file.
*/
struct mschmd_file *next;
/**
* A pointer to the section that this file is located in. Indirectly,
* it also points to the CHM helpfile the file is located in.
*/
struct mschmd_section *section;
/** The offset within the section data that this file is located at. */
off_t offset;
/** The length of this file, in bytes */
off_t length;
/** The filename of this file -- a null terminated string in UTF8. */
char *filename;
};
/** TODO */
struct mschm_compressor {
int dummy;
};
/**
* A decompressor for .CHM (Microsoft HTMLHelp) files
*
* All fields are READ ONLY.
*
* @see mspack_create_chm_decompressor(), mspack_destroy_chm_decompressor()
*/
struct mschm_decompressor {
/**
* Opens a CHM helpfile and reads its contents.
*
* If the file opened is a valid CHM helpfile, all headers will be read
* and a mschmd_header structure will be returned, with a full list of
* files.
*
* In the case of an error occuring, NULL is returned and the error code
* is available from last_error().
*
* The filename pointer should be considered "in use" until close() is
* called on the CHM helpfile.
*
* @param this a self-referential pointer to the mschm_decompressor
* instance being called
* @param filename the filename of the CHM helpfile. This is passed
* directly to mspack_system::open().
* @return a pointer to a mschmd_header structure, or NULL on failure
* @see close()
*/
struct mschmd_header *(*open)(struct mschm_decompressor *this,
char *filename);
/**
* Closes a previously opened CHM helpfile.
*
* This closes a CHM helpfile, frees the mschmd_header and all
* mschmd_file structures associated with it (if any). This works on
* both helpfiles opened with open() and helpfiles opened with
* fast_open().
*
* The CHM header pointer is now invalid and cannot be used again. All
* mschmd_file pointers referencing that CHM are also now invalid, and
* cannot be used again.
*
* @param this a self-referential pointer to the mschm_decompressor
* instance being called
* @param chm the CHM helpfile to close
* @see open(), fast_open()
*/
void (*close)(struct mschm_decompressor *this,
struct mschmd_header *chm);
/**
* Extracts a file from a CHM helpfile.
*
* This extracts a file from a CHM helpfile and writes it to the given
* filename. The filename of the file, mscabd_file::filename, is not
* used by extract(), but can be used by the caller as a guide for
* constructing an appropriate filename.
*
* This method works both with files found in the mschmd_header::files
* and mschmd_header::sysfiles list and mschmd_file structures generated
* on the fly by fast_find().
*
* @param this a self-referential pointer to the mscab_decompressor
* instance being called
* @param file the file to be decompressed
* @param filename the filename of the file being written to
* @return an error code, or MSPACK_ERR_OK if successful
*/
int (*extract)(struct mschm_decompressor *this,
struct mschmd_file *file,
char *filename);
/**
* Returns the error code set by the most recently called method.
*
* This is useful for open() and fast_open(), which do not return an
* error code directly.
*
* @param this a self-referential pointer to the mschm_decompressor
* instance being called
* @return the most recent error code
* @see open(), search()
*/
int (*last_error)(struct mschm_decompressor *this);
/**
* Opens a CHM helpfile quickly.
*
* If the file opened is a valid CHM helpfile, only essential headers
* will be read. A mschmd_header structure will be still be returned, as
* with open(), but the mschmd_header::files field will be NULL. No
* files details will be automatically read. The fast_find() method
* must be used to obtain file details.
*
* In the case of an error occuring, NULL is returned and the error code
* is available from last_error().
*
* The filename pointer should be considered "in use" until close() is
* called on the CHM helpfile.
*
* @param this a self-referential pointer to the mschm_decompressor
* instance being called
* @param filename the filename of the CHM helpfile. This is passed
* directly to mspack_system::open().
* @return a pointer to a mschmd_header structure, or NULL on failure
* @see open(), close(), fast_find(), extract()
*/
struct mschmd_header *(*fast_open)(struct mschm_decompressor *this,
char *filename);
/**
* Finds file details quickly.
*
* Instead of reading all CHM helpfile headers and building a list of
* files, fast_open() and fast_find() are intended for finding file
* details only when they are needed. The CHM file format includes an
* on-disk file index to allow this.
*
* Given a case-sensitive filename, fast_find() will search the on-disk
* index for that file.
*
* If the file was found, the caller-provided mschmd_file structure will
* be filled out like so:
* - section: the correct value for the found file
* - offset: the correct value for the found file
* - length: the correct value for the found file
* - all other structure elements: NULL or 0
*
* If the file was not found, MSPACK_ERR_OK will still be returned as the
* result, but the caller-provided structure will be filled out like so:
* - section: NULL
* - offset: 0
* - length: 0
* - all other structure elements: NULL or 0
*
* This method is intended to be used in conjunction with CHM helpfiles
* opened with fast_open(), but it also works with helpfiles opened
* using the regular open().
*
* @param this a self-referential pointer to the mschm_decompressor
* instance being called
* @param chm the CHM helpfile to search for the file
* @param filename the filename of the file to search for
* @param f_ptr a pointer to a caller-provded mschmd_file structure
* @param f_size <tt>sizeof(struct mschmd_file)</tt>
* @return MSPACK_ERR_OK, or an error code
* @see open(), close(), fast_find(), extract()
*/
int (*fast_find)(struct mschm_decompressor *this,
struct mschmd_header *chm,
char *filename,
struct mschmd_file *f_ptr,
int f_size);
};
/* --- support for .LIT (EBook) file format -------------------------------- */
/** TODO */
struct mslit_compressor {
int dummy;
};
/** TODO */
struct mslit_decompressor {
int dummy;
};
/* --- support for .HLP (MS Help) file format ------------------------------ */
/** TODO */
struct mshlp_compressor {
int dummy;
};
/** TODO */
struct mshlp_decompressor {
int dummy;
};
/* --- support for SZDD file format ---------------------------------------- */
/** TODO */
struct msszdd_compressor {
int dummy;
};
/** TODO */
struct msszdd_decompressor {
int dummy;
};
/* --- support for KWAJ file format ---------------------------------------- */
/** TODO */
struct mskwaj_compressor {
int dummy;
};
/** TODO */
struct mskwaj_decompressor {
int dummy;
};
#ifdef __cplusplus
};
#endif
#endif |