2fe19b26 |
# Makefile.in generated by automake 1.8.5 from Makefile.am. |
468b9e48 |
# @configure_input@
|
318eaff7 |
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004 Free Software Foundation, Inc. |
468b9e48 |
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# |
36f2038b |
# Copyright (C) 2002 - 2004 Tomasz Kojm <tkojm@clamav.net> |
468b9e48 |
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
318eaff7 |
|
468b9e48 |
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c |
318eaff7 |
install_sh_SCRIPT = $(install_sh) -c |
468b9e48 |
INSTALL_HEADER = $(INSTALL_DATA) |
318eaff7 |
transform = $(program_transform_name) |
468b9e48 |
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@ |
318eaff7 |
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/clamav-config.h.in \
$(srcdir)/clamav-config.in $(srcdir)/libclamav.pc.in \ |
b36c1911 |
$(top_srcdir)/configure $(top_srcdir)/docs/man/clamd.8.in \
$(top_srcdir)/docs/man/clamd.conf.5.in \
$(top_srcdir)/docs/man/freshclam.1.in \
$(top_srcdir)/docs/man/freshclam.conf.5.in AUTHORS COPYING \
ChangeLog INSTALL NEWS TODO config.guess config.sub depcomp \
install-sh ltmain.sh missing mkinstalldirs |
318eaff7 |
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno configure.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = clamav-config.h |
b36c1911 |
CONFIG_CLEAN_FILES = clamav-config libclamav.pc docs/man/clamd.8 \
docs/man/clamd.conf.5 docs/man/freshclam.1 \
docs/man/freshclam.conf.5 |
318eaff7 |
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"
binSCRIPT_INSTALL = $(INSTALL_SCRIPT)
SCRIPTS = $(bin_SCRIPTS)
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-exec-recursive install-info-recursive \
install-recursive installcheck-recursive installdirs-recursive \
pdf-recursive ps-recursive uninstall-info-recursive \
uninstall-recursive
pkgconfigDATA_INSTALL = $(INSTALL_DATA)
DATA = $(pkgconfig_DATA)
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
{ test ! -d $(distdir) \
|| { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@ |
7084e554 |
ADDITIONAL_LIBS = @ADDITIONAL_LIBS@ |
318eaff7 |
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@ |
468b9e48 |
AMTAR = @AMTAR@ |
318eaff7 |
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@ |
468b9e48 |
AWK = @AWK@ |
318eaff7 |
BUILD_CLAMD_FALSE = @BUILD_CLAMD_FALSE@
BUILD_CLAMD_TRUE = @BUILD_CLAMD_TRUE@ |
468b9e48 |
CC = @CC@ |
318eaff7 |
CCDEPMODE = @CCDEPMODE@ |
468b9e48 |
CFGDIR = @CFGDIR@ |
318eaff7 |
CFLAGS = @CFLAGS@ |
468b9e48 |
CLAMAVGROUP = @CLAMAVGROUP@
CLAMAVUSER = @CLAMAVUSER@ |
ff28b69c |
CLAMAV_MILTER_LIBS = @CLAMAV_MILTER_LIBS@ |
468b9e48 |
CLAMD_LIBS = @CLAMD_LIBS@ |
318eaff7 |
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@ |
468b9e48 |
DBDIR = @DBDIR@ |
318eaff7 |
DEFS = @DEFS@ |
468b9e48 |
DEPDIR = @DEPDIR@
ECHO = @ECHO@ |
318eaff7 |
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@ |
468b9e48 |
FRESHCLAM_LIBS = @FRESHCLAM_LIBS@
GETENT = @GETENT@ |
318eaff7 |
HAVE_MILTER_FALSE = @HAVE_MILTER_FALSE@
HAVE_MILTER_TRUE = @HAVE_MILTER_TRUE@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
468b9e48 |
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
318eaff7 |
LDFLAGS = @LDFLAGS@ |
468b9e48 |
LIBCLAMAV_LIBS = @LIBCLAMAV_LIBS@
LIBCLAMAV_VERSION = @LIBCLAMAV_VERSION@ |
318eaff7 |
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@ |
468b9e48 |
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@ |
318eaff7 |
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
OBJEXT = @OBJEXT@ |
468b9e48 |
PACKAGE = @PACKAGE@ |
318eaff7 |
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@ |
468b9e48 |
RANLIB = @RANLIB@ |
bef39227 |
SENDMAIL = @SENDMAIL@ |
318eaff7 |
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@ |
468b9e48 |
STRIP = @STRIP@
TH_SAFE = @TH_SAFE@
VERSION = @VERSION@ |
318eaff7 |
ac_ct_CC = @ac_ct_CC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ |
468b9e48 |
am__include = @am__include@ |
318eaff7 |
am__leading_dot = @am__leading_dot@ |
468b9e48 |
am__quote = @am__quote@ |
318eaff7 |
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
includedir = @includedir@
infodir = @infodir@ |
468b9e48 |
install_sh = @install_sh@ |
318eaff7 |
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@ |
13847a2d |
SUBDIRS = libclamav clamscan clamd clamdscan freshclam sigtool database docs etc clamav-milter |
eeb69538 |
EXTRA_DIST = FAQ contrib test examples BUGS shared libclamav.pc.in
bin_SCRIPTS = clamav-config
pkgconfigdir = $(libdir)/pkgconfig
pkgconfig_DATA = libclamav.pc |
8b242bb9 |
all: clamav-config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive |
468b9e48 |
.SUFFIXES: |
318eaff7 |
am--refresh:
@:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
cd $(srcdir) && $(AUTOMAKE) --gnu \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ |
468b9e48 |
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu Makefile |
318eaff7 |
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
468b9e48 |
$(SHELL) ./config.status --recheck
|
318eaff7 |
$(top_srcdir)/configure: $(am__configure_deps)
cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): $(am__aclocal_m4_deps) |
468b9e48 |
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
|
8b242bb9 |
clamav-config.h: stamp-h1
@if test ! -f $@; then \
rm -f stamp-h1; \
$(MAKE) stamp-h1; \
else :; fi
stamp-h1: $(srcdir)/clamav-config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status clamav-config.h |
318eaff7 |
$(srcdir)/clamav-config.h.in: $(am__configure_deps) |
8b242bb9 |
cd $(top_srcdir) && $(AUTOHEADER) |
318eaff7 |
rm -f stamp-h1
touch $@ |
8b242bb9 |
distclean-hdr: |
318eaff7 |
-rm -f clamav-config.h stamp-h1
clamav-config: $(top_builddir)/config.status $(srcdir)/clamav-config.in |
eeb69538 |
cd $(top_builddir) && $(SHELL) ./config.status $@ |
318eaff7 |
libclamav.pc: $(top_builddir)/config.status $(srcdir)/libclamav.pc.in |
eeb69538 |
cd $(top_builddir) && $(SHELL) ./config.status $@ |
b36c1911 |
docs/man/clamd.8: $(top_builddir)/config.status $(top_srcdir)/docs/man/clamd.8.in
cd $(top_builddir) && $(SHELL) ./config.status $@
docs/man/clamd.conf.5: $(top_builddir)/config.status $(top_srcdir)/docs/man/clamd.conf.5.in
cd $(top_builddir) && $(SHELL) ./config.status $@
docs/man/freshclam.1: $(top_builddir)/config.status $(top_srcdir)/docs/man/freshclam.1.in
cd $(top_builddir) && $(SHELL) ./config.status $@
docs/man/freshclam.conf.5: $(top_builddir)/config.status $(top_srcdir)/docs/man/freshclam.conf.5.in
cd $(top_builddir) && $(SHELL) ./config.status $@ |
eeb69538 |
install-binSCRIPTS: $(bin_SCRIPTS)
@$(NORMAL_INSTALL) |
318eaff7 |
test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)" |
eeb69538 |
@list='$(bin_SCRIPTS)'; for p in $$list; do \ |
318eaff7 |
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
if test -f $$d$$p; then \
f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
echo " $(binSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(bindir)/$$f'"; \
$(binSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(bindir)/$$f"; \ |
eeb69538 |
else :; fi; \
done
uninstall-binSCRIPTS:
@$(NORMAL_UNINSTALL)
@list='$(bin_SCRIPTS)'; for p in $$list; do \ |
318eaff7 |
f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
rm -f "$(DESTDIR)$(bindir)/$$f"; \ |
eeb69538 |
done |
8b242bb9 |
|
468b9e48 |
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool
uninstall-info-am: |
eeb69538 |
install-pkgconfigDATA: $(pkgconfig_DATA)
@$(NORMAL_INSTALL) |
318eaff7 |
test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)" |
eeb69538 |
@list='$(pkgconfig_DATA)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f="`echo $$p | sed -e 's|^.*/||'`"; \ |
318eaff7 |
echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
$(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \ |
eeb69538 |
done
uninstall-pkgconfigDATA:
@$(NORMAL_UNINSTALL)
@list='$(pkgconfig_DATA)'; for p in $$list; do \
f="`echo $$p | sed -e 's|^.*/||'`"; \ |
318eaff7 |
echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \ |
eeb69538 |
done |
468b9e48 |
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done |
318eaff7 |
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done |
468b9e48 |
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique |
318eaff7 |
tags: TAGS |
468b9e48 |
|
8b242bb9 |
TAGS: tags-recursive $(HEADERS) $(SOURCES) clamav-config.h.in $(TAGS_DEPENDENCIES) \ |
468b9e48 |
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \ |
2fe19b26 |
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
318eaff7 |
include_option=--etags-include; \ |
2fe19b26 |
empty_fix=.; \ |
318eaff7 |
else \
include_option=--include; \ |
2fe19b26 |
empty_fix=; \ |
318eaff7 |
fi; \ |
468b9e48 |
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \ |
2fe19b26 |
test ! -f $$subdir/TAGS || \ |
318eaff7 |
tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ |
468b9e48 |
fi; \
done; \ |
8b242bb9 |
list='$(SOURCES) $(HEADERS) clamav-config.h.in $(LISP) $(TAGS_FILES)'; \ |
468b9e48 |
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \ |
2fe19b26 |
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique; \
fi |
318eaff7 |
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) clamav-config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) clamav-config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique |
468b9e48 |
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags: |
318eaff7 |
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
468b9e48 |
distdir: $(DISTFILES)
$(am__remove_distdir)
mkdir $(distdir) |
b36c1911 |
$(mkdir_p) $(distdir)/. $(distdir)/docs/man |
318eaff7 |
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \ |
468b9e48 |
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \ |
318eaff7 |
$(mkdir_p) "$(distdir)$$dir"; \ |
468b9e48 |
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \ |
318eaff7 |
test -d "$(distdir)/$$subdir" \
|| mkdir "$(distdir)/$$subdir" \ |
468b9e48 |
|| exit 1; \
(cd $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \ |
318eaff7 |
top_distdir="../$(top_distdir)" \
distdir="../$(distdir)/$$subdir" \ |
468b9e48 |
distdir) \
|| exit 1; \
fi; \
done
-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r $(distdir)
dist-gzip: distdir
$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
|
318eaff7 |
dist-bzip2: distdir
$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
dist-tarZ: distdir
$(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
dist-shar: distdir
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__remove_distdir)
|
468b9e48 |
dist dist-all: distdir
$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist |
318eaff7 |
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\
*.tar.bz2*) \
bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\
*.shar.gz*) \ |
2fe19b26 |
GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ |
318eaff7 |
*.zip*) \
unzip $(distdir).zip ;;\
esac |
468b9e48 |
chmod -R a-w $(distdir); chmod a+w $(distdir) |
318eaff7 |
mkdir $(distdir)/_build
mkdir $(distdir)/_inst |
468b9e48 |
chmod a-w $(distdir) |
318eaff7 |
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& cd $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \ |
468b9e48 |
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \ |
318eaff7 |
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \ |
468b9e48 |
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck
$(am__remove_distdir) |
318eaff7 |
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
distuninstallcheck:
@cd $(distuninstallcheck_dir) \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2 |
468b9e48 |
distcleancheck: distclean |
318eaff7 |
@if test '$(srcdir)' = . ; then \ |
468b9e48 |
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi |
318eaff7 |
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \ |
468b9e48 |
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive |
eeb69538 |
all-am: Makefile $(SCRIPTS) $(DATA) clamav-config.h |
468b9e48 |
installdirs: installdirs-recursive
installdirs-am: |
318eaff7 |
for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"; do \
test -z "$$dir" || $(mkdir_p) "$$dir"; \
done |
468b9e48 |
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
318eaff7 |
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
468b9e48 |
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic: |
318eaff7 |
-rm -f $(CONFIG_CLEAN_FILES) |
468b9e48 |
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive |
318eaff7 |
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr \
distclean-libtool distclean-tags |
468b9e48 |
dvi: dvi-recursive
dvi-am:
|
318eaff7 |
html: html-recursive
|
468b9e48 |
info: info-recursive
info-am:
|
eeb69538 |
install-data-am: install-pkgconfigDATA |
468b9e48 |
|
eeb69538 |
install-exec-am: install-binSCRIPTS |
468b9e48 |
install-info: install-info-recursive
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-recursive |
318eaff7 |
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile |
468b9e48 |
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
|
318eaff7 |
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
|
eeb69538 |
uninstall-am: uninstall-binSCRIPTS uninstall-info-am \
uninstall-pkgconfigDATA |
468b9e48 |
uninstall-info: uninstall-info-recursive
|
318eaff7 |
.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
check-am clean clean-generic clean-libtool clean-recursive \
ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
dist-shar dist-tarZ dist-zip distcheck distclean \
distclean-generic distclean-hdr distclean-libtool \
distclean-recursive distclean-tags distcleancheck distdir \
distuninstallcheck dvi dvi-am html html-am info info-am \
install install-am install-binSCRIPTS install-data \
install-data-am install-exec install-exec-am install-info \
install-info-am install-man install-pkgconfigDATA \
install-strip installcheck installcheck-am installdirs \
installdirs-am maintainer-clean maintainer-clean-generic \ |
eeb69538 |
maintainer-clean-recursive mostlyclean mostlyclean-generic \ |
318eaff7 |
mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
tags tags-recursive uninstall uninstall-am \
uninstall-binSCRIPTS uninstall-info-am uninstall-pkgconfigDATA |
468b9e48 |
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: |