INSTALL
468b9e48
 Copyright 1994, 1995, 1996, 1999, 2000, 2001 Free Software Foundation,
 Inc.
 
    This file is free documentation; the Free Software Foundation gives
 unlimited permission to copy, distribute and modify it.
 
 Basic Installation
 ==================
 
    These are generic installation instructions.
 
    The `configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
 those values to create a `Makefile' in each directory of the package.
 It may also create one or more `.h' files containing system-dependent
 definitions.  Finally, it creates a shell script `config.status' that
 you can run in the future to recreate the current configuration, and a
 file `config.log' containing compiler output (useful mainly for
 debugging `configure').
 
    It can also use an optional file (typically called `config.cache'
 and enabled with `--cache-file=config.cache' or simply `-C') that saves
 the results of its tests to speed up reconfiguring.  (Caching is
 disabled by default to prevent problems with accidental use of stale
 cache files.)
 
    If you need to do unusual things to compile the package, please try
 to figure out how `configure' could check whether to do them, and mail
 diffs or instructions to the address given in the `README' so they can
 be considered for the next release.  If you are using the cache, and at
 some point `config.cache' contains results you don't want to keep, you
 may remove or edit it.
 
    The file `configure.ac' (or `configure.in') is used to create
 `configure' by a program called `autoconf'.  You only need
 `configure.ac' if you want to change it or regenerate `configure' using
 a newer version of `autoconf'.
 
 The simplest way to compile this package is:
 
   1. `cd' to the directory containing the package's source code and type
      `./configure' to configure the package for your system.  If you're
      using `csh' on an old version of System V, you might need to type
      `sh ./configure' instead to prevent `csh' from trying to execute
      `configure' itself.
 
      Running `configure' takes awhile.  While running, it prints some
      messages telling which features it is checking for.
 
   2. Type `make' to compile the package.
 
   3. Optionally, type `make check' to run any self-tests that come with
      the package.
 
   4. Type `make install' to install the programs and any data files and
      documentation.
 
   5. You can remove the program binaries and object files from the
      source code directory by typing `make clean'.  To also remove the
      files that `configure' created (so you can compile the package for
      a different kind of computer), type `make distclean'.  There is
      also a `make maintainer-clean' target, but that is intended mainly
      for the package's developers.  If you use it, you may have to get
      all sorts of other programs in order to regenerate files that came
      with the distribution.
 
 Compilers and Options
 =====================
 
    Some systems require unusual options for compilation or linking that
 the `configure' script does not know about.  Run `./configure --help'
 for details on some of the pertinent environment variables.
 
    You can give `configure' initial values for variables by setting
 them in the environment.  You can do that on the command line like this:
 
      ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
 
    *Note Defining Variables::, for more details.
 
 Compiling For Multiple Architectures
 ====================================
 
    You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
 own directory.  To do this, you must use a version of `make' that
 supports the `VPATH' variable, such as GNU `make'.  `cd' to the
 directory where you want the object files and executables to go and run
 the `configure' script.  `configure' automatically checks for the
 source code in the directory that `configure' is in and in `..'.
 
    If you have to use a `make' that does not support the `VPATH'
 variable, you have to compile the package for one architecture at a
 time in the source code directory.  After you have installed the
 package for one architecture, use `make distclean' before reconfiguring
 for another architecture.
 
 Installation Names
 ==================
 
    By default, `make install' will install the package's files in
 `/usr/local/bin', `/usr/local/man', etc.  You can specify an
 installation prefix other than `/usr/local' by giving `configure' the
 option `--prefix=PATH'.
 
    You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
 give `configure' the option `--exec-prefix=PATH', the package will use
 PATH as the prefix for installing programs and libraries.
 Documentation and other data files will still use the regular prefix.
 
    In addition, if you use an unusual directory layout you can give
 options like `--bindir=PATH' to specify different values for particular
 kinds of files.  Run `configure --help' for a list of the directories
 you can set and what kinds of files go in them.
 
    If the package supports it, you can cause programs to be installed
 with an extra prefix or suffix on their names by giving `configure' the
 option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
 
 Optional Features
 =================
 
    Some packages pay attention to `--enable-FEATURE' options to
 `configure', where FEATURE indicates an optional part of the package.
 They may also pay attention to `--with-PACKAGE' options, where PACKAGE
 is something like `gnu-as' or `x' (for the X Window System).  The
 `README' should mention any `--enable-' and `--with-' options that the
 package recognizes.
 
    For packages that use the X Window System, `configure' can usually
 find the X include and library files automatically, but if it doesn't,
 you can use the `configure' options `--x-includes=DIR' and
 `--x-libraries=DIR' to specify their locations.
 
 Specifying the System Type
 ==========================
 
    There may be some features `configure' cannot figure out
 automatically, but needs to determine by the type of host the package
 will run on.  Usually `configure' can figure that out, but if it prints
 a message saying it cannot guess the host type, give it the
 `--build=TYPE' option.  TYPE can either be a short name for the system
 type, such as `sun4', or a canonical name which has the form:
 
      CPU-COMPANY-SYSTEM
 
 where SYSTEM can have one of these forms:
 
      OS KERNEL-OS
 
    See the file `config.sub' for the possible values of each field.  If
 `config.sub' isn't included in this package, then this package doesn't
 need to know the host type.
 
    If you are _building_ compiler tools for cross-compiling, you should
 use the `--target=TYPE' option to select the type of system they will
 produce code for.
 
    If you want to _use_ a cross compiler, that generates code for a
 platform different from the build platform, you should specify the host
 platform (i.e., that on which the generated programs will eventually be
 run) with `--host=TYPE'.  In this case, you should also specify the
 build platform with `--build=TYPE', because, in this case, it may not
 be possible to guess the build platform (it sometimes involves
 compiling and running simple test programs, and this can't be done if
 the compiler is a cross compiler).
 
 Sharing Defaults
 ================
 
    If you want to set default values for `configure' scripts to share,
 you can create a site shell script called `config.site' that gives
 default values for variables like `CC', `cache_file', and `prefix'.
 `configure' looks for `PREFIX/share/config.site' if it exists, then
 `PREFIX/etc/config.site' if it exists.  Or, you can set the
 `CONFIG_SITE' environment variable to the location of the site script.
 A warning: not all `configure' scripts look for a site script.
 
 Defining Variables
 ==================
 
    Variables not defined in a site shell script can be set in the
 environment passed to `configure'.  However, some packages may run
 configure again during the build, and the customized values of these
 variables may be lost.  In order to avoid this problem, you should set
 them in the `configure' command line, using `VAR=value'.  For example:
 
      ./configure CC=/usr/local2/bin/gcc
 
 will cause the specified gcc to be used as the C compiler (unless it is
 overridden in the site shell script).
 
 `configure' Invocation
 ======================
 
    `configure' recognizes the following options to control how it
 operates.
 
 `--help'
 `-h'
      Print a summary of the options to `configure', and exit.
 
 `--version'
 `-V'
      Print the version of Autoconf used to generate the `configure'
      script, and exit.
 
 `--cache-file=FILE'
      Enable the cache: use and save the results of the tests in FILE,
      traditionally `config.cache'.  FILE defaults to `/dev/null' to
      disable caching.
 
 `--config-cache'
 `-C'
      Alias for `--cache-file=config.cache'.
 
 `--quiet'
 `--silent'
 `-q'
      Do not print messages saying which checks are being made.  To
      suppress all normal output, redirect it to `/dev/null' (any error
      messages will still be shown).
 
 `--srcdir=DIR'
      Look for the package's source code in directory DIR.  Usually
      `configure' can determine that directory automatically.
 
 `configure' also accepts some other, not widely useful, options.  Run
 `configure --help' for more details.