# libtool (GNU libtool) 2.4.2

 # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 

 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,

 # 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.

 # This is free software; see the source for copying conditions.  There is NO
 # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
 # GNU Libtool is free software; you can redistribute it and/or modify

 # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 2 of the License, or
 # (at your option) any later version.
 #

 # As a special exception to the GNU General Public License,
 # if you distribute this file as part of a program or library that
 # is built using GNU Libtool, you may include this file under the
 # same distribution terms that you use for the rest of that program.
 #
 # GNU Libtool is distributed in the hope that it will be useful, but

 # WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 # General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License

 # along with GNU Libtool; see the file COPYING.  If not, a copy
 # can be downloaded from http://www.gnu.org/licenses/gpl.html,
 # or obtained by writing to the Free Software Foundation, Inc.,
 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

 # Usage: $progname [OPTION]... [MODE-ARG]...
 #
 # Provide generalized library-building support services.
 #

 #       --config             show all configuration variables
 #       --debug              enable verbose shell tracing
 #   -n, --dry-run            display commands without modifying any files
 #       --features           display basic configuration information and exit
 #       --mode=MODE          use operation mode MODE
 #       --preserve-dup-deps  don't remove duplicate dependency libraries
 #       --quiet, --silent    don't print informational messages
 #       --no-quiet, --no-silent
 #                            print informational messages (default)

 #       --no-warn            don't display warning messages

 #       --tag=TAG            use configuration variables from tag TAG
 #   -v, --verbose            print more informational messages than default
 #       --no-verbose         don't print the extra informational messages
 #       --version            print version information
 #   -h, --help, --help-all   print short, long, or detailed help message

 #
 # MODE must be one of the following:
 #

 #         clean              remove files from the build directory
 #         compile            compile a source file into a libtool object
 #         execute            automatically set library path, then run a program
 #         finish             complete the installation of libtool libraries
 #         install            install libraries or executables
 #         link               create a library or an executable
 #         uninstall          remove libraries from an installed directory

 #

 # MODE-ARGS vary depending on the MODE.  When passed as first option,
 # `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.

 # Try `$progname --help --mode=MODE' for a more detailed description of MODE.
 #
 # When reporting a bug, please describe a test case to reproduce it and
 # include the following information:
 #

 #         host-triplet:	$host
 #         shell:		$SHELL
 #         compiler:		$LTCC
 #         compiler flags:		$LTCFLAGS
 #         linker:		$LD (gnu? $with_gnu_ld)

 #         $progname:	(GNU libtool) 2.4.2 Debian-2.4.2-1.1

 #         automake:	$automake_version
 #         autoconf:	$autoconf_version

 #
 # Report bugs to <bug-libtool@gnu.org>.

 # GNU libtool home page: <http://www.gnu.org/software/libtool/>.
 # General help using GNU software: <http://www.gnu.org/gethelp/>.

 PROGRAM=libtool

 PACKAGE=libtool

 VERSION="2.4.2 Debian-2.4.2-1.1"

 TIMESTAMP=""

 package_revision=1.3337

 # Be Bourne compatible

 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
   # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'

   setopt NO_GLOB_SUBST

 else
   case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac

 fi

 BIN_SH=xpg4; export BIN_SH # for Tru64
 DUALCASE=1; export DUALCASE # for MKS sh

 # A function that is used when there is no print builtin or printf.
 func_fallback_echo ()
 {
   eval 'cat <<_LTECHO_EOF
 $1
 _LTECHO_EOF'
 }
 

 # NLS nuisances: We save the old values to restore during execute mode.
 lt_user_locale=
 lt_safe_locale=

 for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES

 do
   eval "if test \"\${$lt_var+set}\" = set; then

           save_$lt_var=\$$lt_var
           $lt_var=C

 	  export $lt_var

 	  lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
 	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"

 	fi"
 done

 LC_ALL=C
 LANGUAGE=C
 export LANGUAGE LC_ALL

 $lt_unset CDPATH
 
 

 # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
 # is ksh but when the shell is invoked as "sh" and the current value of
 # the _XPG environment variable is not equal to 1 (one), the special
 # positional parameter $0, within a function call, is the name of the
 # function.
 progpath="$0"

 
 
 
 : ${CP="cp -f"}

 test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}

 : ${MAKE="make"}
 : ${MKDIR="mkdir"}
 : ${MV="mv -f"}
 : ${RM="rm -f"}
 : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
 : ${Xsed="$SED -e 1s/^X//"}
 
 # Global variables:
 EXIT_SUCCESS=0
 EXIT_FAILURE=1
 EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
 EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
 
 exit_status=$EXIT_SUCCESS

 # Make sure IFS has a sensible default
 lt_nl='
 '
 IFS=" 	$lt_nl"
 

 dirname="s,/[^/]*$,,"
 basename="s,^.*/,,"
 

 # func_dirname file append nondir_replacement
 # Compute the dirname of FILE.  If nonempty, add APPEND to the result,
 # otherwise set result to NONDIR_REPLACEMENT.
 func_dirname ()
 {
     func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
     if test "X$func_dirname_result" = "X${1}"; then
       func_dirname_result="${3}"
     else
       func_dirname_result="$func_dirname_result${2}"
     fi
 } # func_dirname may be replaced by extended shell implementation
 
 
 # func_basename file
 func_basename ()
 {
     func_basename_result=`$ECHO "${1}" | $SED "$basename"`
 } # func_basename may be replaced by extended shell implementation
 
 

 # func_dirname_and_basename file append nondir_replacement
 # perform func_basename and func_dirname in a single function
 # call:
 #   dirname:  Compute the dirname of FILE.  If nonempty,
 #             add APPEND to the result, otherwise set result
 #             to NONDIR_REPLACEMENT.
 #             value returned in "$func_dirname_result"
 #   basename: Compute filename of FILE.
 #             value retuned in "$func_basename_result"
 # Implementation must be kept synchronized with func_dirname
 # and func_basename. For efficiency, we do not delegate to
 # those functions but instead duplicate the functionality here.
 func_dirname_and_basename ()
 {

     # Extract subdirectory from the argument.
     func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
     if test "X$func_dirname_result" = "X${1}"; then
       func_dirname_result="${3}"
     else
       func_dirname_result="$func_dirname_result${2}"
     fi
     func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
 } # func_dirname_and_basename may be replaced by extended shell implementation
 
 
 # func_stripname prefix suffix name
 # strip PREFIX and SUFFIX off of NAME.
 # PREFIX and SUFFIX must not contain globbing or regex special
 # characters, hashes, percent signs, but SUFFIX may contain a leading
 # dot (in which case that matches only a dot).
 # func_strip_suffix prefix name
 func_stripname ()
 {
     case ${2} in
       .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
       *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
     esac
 } # func_stripname may be replaced by extended shell implementation
 
 
 # These SED scripts presuppose an absolute path with a trailing slash.
 pathcar='s,^/\([^/]*\).*$,\1,'
 pathcdr='s,^/[^/]*,,'
 removedotparts=':dotsl
 		s@/\./@/@g
 		t dotsl
 		s,/\.$,/,'
 collapseslashes='s@/\{1,\}@/@g'
 finalslash='s,/*$,/,'
 
 # func_normal_abspath PATH
 # Remove doubled-up and trailing slashes, "." path components,
 # and cancel out any ".." path components in PATH after making
 # it an absolute path.
 #             value returned in "$func_normal_abspath_result"
 func_normal_abspath ()
 {
   # Start from root dir and reassemble the path.
   func_normal_abspath_result=
   func_normal_abspath_tpath=$1
   func_normal_abspath_altnamespace=
   case $func_normal_abspath_tpath in
     "")
       # Empty path, that just means $cwd.
       func_stripname '' '/' "`pwd`"
       func_normal_abspath_result=$func_stripname_result
       return
     ;;
     # The next three entries are used to spot a run of precisely
     # two leading slashes without using negated character classes;
     # we take advantage of case's first-match behaviour.
     ///*)
       # Unusual form of absolute path, do nothing.
     ;;
     //*)
       # Not necessarily an ordinary path; POSIX reserves leading '//'
       # and for example Cygwin uses it to access remote file shares
       # over CIFS/SMB, so we conserve a leading double slash if found.
       func_normal_abspath_altnamespace=/
     ;;
     /*)
       # Absolute path, do nothing.
     ;;
     *)
       # Relative path, prepend $cwd.
       func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
     ;;
   esac
   # Cancel out all the simple stuff to save iterations.  We also want
   # the path to end with a slash for ease of parsing, so make sure
   # there is one (and only one) here.
   func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
         -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
   while :; do
     # Processed it all yet?
     if test "$func_normal_abspath_tpath" = / ; then
       # If we ascended to the root using ".." the result may be empty now.
       if test -z "$func_normal_abspath_result" ; then
         func_normal_abspath_result=/
       fi
       break
     fi
     func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
         -e "$pathcar"`
     func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
         -e "$pathcdr"`
     # Figure out what to do with it
     case $func_normal_abspath_tcomponent in
       "")
         # Trailing empty path component, ignore it.
       ;;
       ..)
         # Parent dir; strip last assembled component from result.
         func_dirname "$func_normal_abspath_result"
         func_normal_abspath_result=$func_dirname_result
       ;;
       *)
         # Actual path component, append it.
         func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
       ;;
     esac
   done
   # Restore leading double-slash if one was found on entry.
   func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result

 }

 # func_relative_path SRCDIR DSTDIR
 # generates a relative path from SRCDIR to DSTDIR, with a trailing
 # slash if non-empty, suitable for immediately appending a filename
 # without needing to append a separator.
 #             value returned in "$func_relative_path_result"
 func_relative_path ()
 {
   func_relative_path_result=
   func_normal_abspath "$1"
   func_relative_path_tlibdir=$func_normal_abspath_result
   func_normal_abspath "$2"
   func_relative_path_tbindir=$func_normal_abspath_result
 
   # Ascend the tree starting from libdir
   while :; do
     # check if we have found a prefix of bindir
     case $func_relative_path_tbindir in
       $func_relative_path_tlibdir)
         # found an exact match
         func_relative_path_tcancelled=
         break
         ;;
       $func_relative_path_tlibdir*)
         # found a matching prefix
         func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
         func_relative_path_tcancelled=$func_stripname_result
         if test -z "$func_relative_path_result"; then
           func_relative_path_result=.
         fi
         break
         ;;
       *)
         func_dirname $func_relative_path_tlibdir
         func_relative_path_tlibdir=${func_dirname_result}
         if test "x$func_relative_path_tlibdir" = x ; then
           # Have to descend all the way to the root!
           func_relative_path_result=../$func_relative_path_result
           func_relative_path_tcancelled=$func_relative_path_tbindir
           break
         fi
         func_relative_path_result=../$func_relative_path_result
         ;;
     esac
   done

   # Now calculate path; take care to avoid doubling-up slashes.
   func_stripname '' '/' "$func_relative_path_result"
   func_relative_path_result=$func_stripname_result
   func_stripname '/' '/' "$func_relative_path_tcancelled"
   if test "x$func_stripname_result" != x ; then
     func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
   fi
 
   # Normalisation. If bindir is libdir, return empty string,
   # else relative path ending with a slash; either way, target
   # file name can be directly appended.
   if test ! -z "$func_relative_path_result"; then
     func_stripname './' '' "$func_relative_path_result/"
     func_relative_path_result=$func_stripname_result
   fi
 }

 
 # The name of this program:
 func_dirname_and_basename "$progpath"
 progname=$func_basename_result
 
 # Make sure we have an absolute path for reexecution:
 case $progpath in
   [\\/]*|[A-Za-z]:\\*) ;;
   *[\\/]*)
      progdir=$func_dirname_result
      progdir=`cd "$progdir" && pwd`
      progpath="$progdir/$progname"
      ;;
   *)
      save_IFS="$IFS"

      IFS=${PATH_SEPARATOR-:}

      for progdir in $PATH; do
        IFS="$save_IFS"
        test -x "$progdir/$progname" && break
      done
      IFS="$save_IFS"
      test -n "$progdir" || progdir=`pwd`
      progpath="$progdir/$progname"
      ;;
 esac
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
 Xsed="${SED}"' -e 1s/^X//'
 sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
 
 # Same as above, but do not quote variable references.
 double_quote_subst='s/\(["`\\]\)/\\\1/g'
 

 # Sed substitution that turns a string into a regex matching for the
 # string literally.
 sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
 
 # Sed substitution that converts a w32 file name or path
 # which contains forward slashes, into one that contains
 # (escaped) backslashes.  A very naive implementation.
 lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
 

 # Re-`\' parameter expansions in output of double_quote_subst that were
 # `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
 # in input to double_quote_subst, that '$' was protected from expansion.
 # Since each input `\' is now two `\'s, look for any number of runs of
 # four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
 bs='\\'
 bs2='\\\\'
 bs4='\\\\\\\\'
 dollar='\$'
 sed_double_backslash="\
   s/$bs4/&\\
 /g
   s/^$bs2$dollar/$bs&/
   s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
   s/\n//g"
 
 # Standard options:
 opt_dry_run=false
 opt_help=false
 opt_quiet=false
 opt_verbose=false
 opt_warning=:
 
 # func_echo arg...
 # Echo program name prefixed message, along with the current mode
 # name if it has been set yet.
 func_echo ()
 {

     $ECHO "$progname: ${opt_mode+$opt_mode: }$*"

 }
 
 # func_verbose arg...
 # Echo program name prefixed message in verbose mode only.
 func_verbose ()
 {
     $opt_verbose && func_echo ${1+"$@"}
 
     # A bug in bash halts the script if the last line of a function
     # fails when set -e is in force, so we need another command to
     # work around that:
     :
 }
 

 # func_echo_all arg...
 # Invoke $ECHO with all args, space-separated.
 func_echo_all ()
 {
     $ECHO "$*"
 }
 

 # func_error arg...
 # Echo program name prefixed message to standard error.
 func_error ()
 {

     $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2

 }
 
 # func_warning arg...
 # Echo program name prefixed warning message to standard error.
 func_warning ()
 {

     $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2

 
     # bash bug again:
     :
 }
 
 # func_fatal_error arg...
 # Echo program name prefixed message to standard error, and exit.
 func_fatal_error ()
 {
     func_error ${1+"$@"}
     exit $EXIT_FAILURE
 }
 
 # func_fatal_help arg...
 # Echo program name prefixed message to standard error, followed by
 # a help hint, and exit.
 func_fatal_help ()
 {
     func_error ${1+"$@"}
     func_fatal_error "$help"
 }
 help="Try \`$progname --help' for more information."  ## default
 
 
 # func_grep expression filename
 # Check whether EXPRESSION matches any line of FILENAME, without output.
 func_grep ()
 {
     $GREP "$1" "$2" >/dev/null 2>&1
 }
 
 
 # func_mkdir_p directory-path
 # Make sure the entire path to DIRECTORY-PATH is available.
 func_mkdir_p ()
 {
     my_directory_path="$1"
     my_dir_list=
 
     if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
 
       # Protect directory names starting with `-'
       case $my_directory_path in
         -*) my_directory_path="./$my_directory_path" ;;
       esac
 
       # While some portion of DIR does not yet exist...
       while test ! -d "$my_directory_path"; do
         # ...make a list in topmost first order.  Use a colon delimited
 	# list incase some portion of path contains whitespace.
         my_dir_list="$my_directory_path:$my_dir_list"
 
         # If the last portion added has no slash in it, the list is done
         case $my_directory_path in */*) ;; *) break ;; esac
 
         # ...otherwise throw away the child directory and loop

         my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`

       done

       my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`

 
       save_mkdir_p_IFS="$IFS"; IFS=':'
       for my_dir in $my_dir_list; do
 	IFS="$save_mkdir_p_IFS"
         # mkdir can fail with a `File exist' error if two processes
         # try to create one of the directories concurrently.  Don't
         # stop in that case!
         $MKDIR "$my_dir" 2>/dev/null || :
       done
       IFS="$save_mkdir_p_IFS"
 
       # Bail out if we (or some other process) failed to create a directory.
       test -d "$my_directory_path" || \
         func_fatal_error "Failed to create \`$1'"
     fi
 }

 
 
 # func_mktempdir [string]
 # Make a temporary directory that won't clash with other running
 # libtool processes, and avoids race conditions if possible.  If
 # given, STRING is the basename for that directory.
 func_mktempdir ()
 {
     my_template="${TMPDIR-/tmp}/${1-$progname}"
 

     if test "$opt_dry_run" = ":"; then

       # Return a directory name, but don't create it in dry-run mode
       my_tmpdir="${my_template}-$$"
     else
 
       # If mktemp works, use that first and foremost
       my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
 
       if test ! -d "$my_tmpdir"; then

         # Failing that, at least try and use $RANDOM to avoid a race
         my_tmpdir="${my_template}-${RANDOM-0}$$"

         save_mktempdir_umask=`umask`
         umask 0077
         $MKDIR "$my_tmpdir"
         umask $save_mktempdir_umask

       fi
 
       # If we're not in dry-run mode, bomb out on failure

       test -d "$my_tmpdir" || \
         func_fatal_error "cannot create temporary directory \`$my_tmpdir'"

     fi
 

     $ECHO "$my_tmpdir"

 }
 
 

 # func_quote_for_eval arg
 # Aesthetically quote ARG to be evaled later.
 # This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
 # is double-quoted, suitable for a subsequent eval, whereas
 # FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
 # which are still active within double quotes backslashified.
 func_quote_for_eval ()

 {

     case $1 in
       *[\\\`\"\$]*)

 	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;

       *)
         func_quote_for_eval_unquoted_result="$1" ;;
     esac
 
     case $func_quote_for_eval_unquoted_result in
       # Double-quote args containing shell metacharacters to delay
       # word splitting, command substitution and and variable
       # expansion for a subsequent eval.
       # Many Bourne shells cannot handle close brackets correctly
       # in scan sets, so we specify it separately.
       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
         func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
         ;;
       *)
         func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"

     esac
 }
 
 

 # func_quote_for_expand arg
 # Aesthetically quote ARG to be evaled later; same as above,
 # but do not quote variable references.
 func_quote_for_expand ()

 {

     case $1 in
       *[\\\`\"]*)

 	my_arg=`$ECHO "$1" | $SED \

 	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;

       *)

         my_arg="$1" ;;
     esac
 
     case $my_arg in
       # Double-quote args containing shell metacharacters to delay
       # word splitting and command substitution for a subsequent eval.
       # Many Bourne shells cannot handle close brackets correctly
       # in scan sets, so we specify it separately.
       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
         my_arg="\"$my_arg\""
         ;;
     esac
 
     func_quote_for_expand_result="$my_arg"

 }
 
 

 # func_show_eval cmd [fail_exp]
 # Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
 # not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
 # is given, then evaluate it.
 func_show_eval ()

 {

     my_cmd="$1"
     my_fail_exp="${2-:}"

     ${opt_silent-false} || {
       func_quote_for_expand "$my_cmd"
       eval "func_echo $func_quote_for_expand_result"
     }
 
     if ${opt_dry_run-false}; then :; else
       eval "$my_cmd"
       my_status=$?
       if test "$my_status" -eq 0; then :; else
 	eval "(exit $my_status); $my_fail_exp"
       fi

     fi
 }
 

 
 # func_show_eval_locale cmd [fail_exp]
 # Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
 # not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
 # is given, then evaluate it.  Use the saved locale for evaluation.
 func_show_eval_locale ()

 {

     my_cmd="$1"
     my_fail_exp="${2-:}"

     ${opt_silent-false} || {
       func_quote_for_expand "$my_cmd"
       eval "func_echo $func_quote_for_expand_result"
     }

     if ${opt_dry_run-false}; then :; else
       eval "$lt_user_locale
 	    $my_cmd"
       my_status=$?
       eval "$lt_safe_locale"
       if test "$my_status" -eq 0; then :; else
 	eval "(exit $my_status); $my_fail_exp"

       fi

     fi

 }
 

 # func_tr_sh
 # Turn $1 into a string suitable for a shell variable name.
 # Result is stored in $func_tr_sh_result.  All characters
 # not in the set a-zA-Z0-9_ are replaced with '_'. Further,
 # if $1 begins with a digit, a '_' is prepended as well.
 func_tr_sh ()
 {
   case $1 in
   [0-9]* | *[!a-zA-Z0-9_]*)
     func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
     ;;
   * )
     func_tr_sh_result=$1
     ;;
   esac
 }

 
 
 # func_version
 # Echo version message to standard output and exit.
 func_version ()
 {

     $opt_debug
 
     $SED -n '/(C)/!b go
 	:more
 	/\./!{
 	  N
 	  s/\n# / /
 	  b more
 	}
 	:go
 	/^# '$PROGRAM' (GNU /,/# warranty; / {

         s/^# //
 	s/^# *$//
         s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
         p
      }' < "$progpath"
      exit $?
 }
 
 # func_usage
 # Echo short help message to standard output and exit.
 func_usage ()
 {

     $opt_debug
 
     $SED -n '/^# Usage:/,/^#  *.*--help/ {

         s/^# //
 	s/^# *$//
 	s/\$progname/'$progname'/
 	p
     }' < "$progpath"

     echo

     $ECHO "run \`$progname --help | more' for full usage"
     exit $?
 }
 

 # func_help [NOEXIT]
 # Echo long help message to standard output and exit,
 # unless 'noexit' is passed as argument.

 func_help ()
 {

     $opt_debug
 

     $SED -n '/^# Usage:/,/# Report bugs to/ {

 	:print

         s/^# //
 	s/^# *$//
 	s*\$progname*'$progname'*
 	s*\$host*'"$host"'*
 	s*\$SHELL*'"$SHELL"'*
 	s*\$LTCC*'"$LTCC"'*
 	s*\$LTCFLAGS*'"$LTCFLAGS"'*
 	s*\$LD*'"$LD"'*
 	s/\$with_gnu_ld/'"$with_gnu_ld"'/

 	s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
 	s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/

 	p

 	d
      }
      /^# .* home page:/b print
      /^# General help using/b print
      ' < "$progpath"
     ret=$?
     if test -z "$1"; then
       exit $ret
     fi

 }
 
 # func_missing_arg argname
 # Echo program name prefixed message to standard error and set global
 # exit_cmd.
 func_missing_arg ()
 {

     $opt_debug
 
     func_error "missing argument for $1."

     exit_cmd=exit
 }
 
 

 # func_split_short_opt shortopt
 # Set func_split_short_opt_name and func_split_short_opt_arg shell
 # variables after splitting SHORTOPT after the 2nd character.
 func_split_short_opt ()
 {
     my_sed_short_opt='1s/^\(..\).*$/\1/;q'
     my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
 
     func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
     func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
 } # func_split_short_opt may be replaced by extended shell implementation

 # func_split_long_opt longopt
 # Set func_split_long_opt_name and func_split_long_opt_arg shell
 # variables after splitting LONGOPT at the `=' sign.
 func_split_long_opt ()
 {
     my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
     my_sed_long_arg='1s/^--[^=]*=//'
 
     func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
     func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
 } # func_split_long_opt may be replaced by extended shell implementation
 
 exit_cmd=:
 

 magic="%%%MAGIC variable%%%"
 magic_exe="%%%MAGIC EXE variable%%%"

 # Global variables.
 nonopt=
 preserve_args=
 lo2o="s/\\.lo\$/.${objext}/"
 o2lo="s/\\.${objext}\$/.lo/"
 extracted_archives=
 extracted_serial=0

 # If this variable is set in any of the actions, the command in it
 # will be execed at the end.  This prevents here-documents from being
 # left over by shells.
 exec_cmd=
 

 # func_append var value
 # Append VALUE to the end of shell variable VAR.
 func_append ()
 {
     eval "${1}=\$${1}\${2}"
 } # func_append may be replaced by extended shell implementation
 
 # func_append_quoted var value
 # Quote VALUE and append to the end of shell variable VAR, separated
 # by a space.
 func_append_quoted ()
 {
     func_quote_for_eval "${2}"
     eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
 } # func_append_quoted may be replaced by extended shell implementation
 
 
 # func_arith arithmetic-term...
 func_arith ()
 {
     func_arith_result=`expr "${@}"`
 } # func_arith may be replaced by extended shell implementation
 
 
 # func_len string
 # STRING may not start with a hyphen.
 func_len ()
 {
     func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
 } # func_len may be replaced by extended shell implementation
 
 
 # func_lo2o object
 func_lo2o ()
 {
     func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
 } # func_lo2o may be replaced by extended shell implementation
 
 
 # func_xform libobj-or-source
 func_xform ()
 {
     func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
 } # func_xform may be replaced by extended shell implementation
 
 

 # func_fatal_configuration arg...
 # Echo program name prefixed message to standard error, followed by
 # a configuration failure hint, and exit.
 func_fatal_configuration ()
 {
     func_error ${1+"$@"}
     func_error "See the $PACKAGE documentation for more information."
     func_fatal_error "Fatal configuration error."
 }

 # func_config
 # Display the configuration for all the tags in this script.
 func_config ()
 {
     re_begincf='^# ### BEGIN LIBTOOL'
     re_endcf='^# ### END LIBTOOL'
 
     # Default configuration.
     $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"

 
     # Now print the configurations for the tags.
     for tagname in $taglist; do

       $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"

     done
 

     exit $?
 }

 # func_features
 # Display the features supported by this script.
 func_features ()
 {

     echo "host: $host"

     if test "$build_libtool_libs" = yes; then

       echo "enable shared libraries"

     else

       echo "disable shared libraries"

     fi
     if test "$build_old_libs" = yes; then

       echo "enable static libraries"

     else

       echo "disable static libraries"

     fi

     exit $?

 }

 # func_enable_tag tagname
 # Verify that TAGNAME is valid, and either flag an error and exit, or
 # enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
 # variable here.
 func_enable_tag ()
 {
   # Global variable:
   tagname="$1"

   re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
   re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
   sed_extractcf="/$re_begincf/,/$re_endcf/p"

   # Validate tagname.
   case $tagname in
     *[!-_A-Za-z0-9,/]*)
       func_fatal_error "invalid tag name: $tagname"
       ;;
   esac

   # Don't test for the "default" C tag, as we know it's
   # there but not specially marked.
   case $tagname in
     CC) ;;
     *)
       if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
 	taglist="$taglist $tagname"
 
 	# Evaluate the configuration.  Be careful to quote the path
 	# and the sed script, to avoid splitting on whitespace, but
 	# also don't use non-portable quotes within backquotes within
 	# quotes we have to do it in 2 steps:
 	extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
 	eval "$extractedcf"
       else
 	func_error "ignoring unknown tag $tagname"
       fi
       ;;
   esac
 }

 # func_check_version_match
 # Ensure that we are using m4 macros, and libtool script from the same
 # release of libtool.
 func_check_version_match ()

 {

   if test "$package_revision" != "$macro_revision"; then
     if test "$VERSION" != "$macro_version"; then
       if test -z "$macro_version"; then
         cat >&2 <<_LT_EOF
 $progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
 $progname: definition of this LT_INIT comes from an older release.
 $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
 $progname: and run autoconf again.
 _LT_EOF
       else
         cat >&2 <<_LT_EOF
 $progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
 $progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
 $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
 $progname: and run autoconf again.
 _LT_EOF
       fi
     else
       cat >&2 <<_LT_EOF
 $progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
 $progname: but the definition of this LT_INIT comes from revision $macro_revision.
 $progname: You should recreate aclocal.m4 with macros from revision $package_revision
 $progname: of $PACKAGE $VERSION and run autoconf again.
 _LT_EOF
     fi

     exit $EXIT_MISMATCH
   fi
 }
 
 
 # Shorthand for --mode=foo, only valid as the first argument
 case $1 in
 clean|clea|cle|cl)
   shift; set dummy --mode clean ${1+"$@"}; shift
   ;;
 compile|compil|compi|comp|com|co|c)
   shift; set dummy --mode compile ${1+"$@"}; shift
   ;;
 execute|execut|execu|exec|exe|ex|e)
   shift; set dummy --mode execute ${1+"$@"}; shift
   ;;
 finish|finis|fini|fin|fi|f)
   shift; set dummy --mode finish ${1+"$@"}; shift
   ;;
 install|instal|insta|inst|ins|in|i)
   shift; set dummy --mode install ${1+"$@"}; shift
   ;;
 link|lin|li|l)
   shift; set dummy --mode link ${1+"$@"}; shift
   ;;
 uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
   shift; set dummy --mode uninstall ${1+"$@"}; shift
   ;;
 esac

 
 
 # Option defaults:
 opt_debug=:
 opt_dry_run=false
 opt_config=false
 opt_preserve_dup_deps=false
 opt_features=false
 opt_finish=false
 opt_help=false
 opt_help_all=false
 opt_silent=:

 opt_warning=:

 opt_verbose=:
 opt_silent=false
 opt_verbose=false
 
 
 # Parse options once, thoroughly.  This comes as soon as possible in the
 # script to make things like `--version' happen as quickly as we can.
 {
   # this just eases exit handling
   while test $# -gt 0; do

     opt="$1"
     shift
     case $opt in

       --debug|-x)	opt_debug='set -x'

 			func_echo "enabling shell trace mode"
 			$opt_debug
 			;;

       --dry-run|--dryrun|-n)
 			opt_dry_run=:

 			;;

       --config)
 			opt_config=:
 func_config
 			;;
       --dlopen|-dlopen)
 			optarg="$1"
 			opt_dlopen="${opt_dlopen+$opt_dlopen
 }$optarg"

 			shift
 			;;
       --preserve-dup-deps)

 			opt_preserve_dup_deps=:

 			;;

       --features)
 			opt_features=:
 func_features
 			;;
       --finish)
 			opt_finish=:
 set dummy --mode finish ${1+"$@"}; shift
 			;;
       --help)
 			opt_help=:
 			;;
       --help-all)
 			opt_help_all=:
 opt_help=': help-all'
 			;;
       --mode)
 			test $# = 0 && func_missing_arg $opt && break
 			optarg="$1"
 			opt_mode="$optarg"
 case $optarg in
   # Valid mode arguments:
   clean|compile|execute|finish|install|link|relink|uninstall) ;;
 
   # Catch anything else as an error
   *) func_error "invalid argument for $opt"
      exit_cmd=exit
      break
      ;;
 esac
 			shift
 			;;
       --no-silent|--no-quiet)

 			opt_silent=false

 func_append preserve_args " $opt"

 			;;

       --no-warning|--no-warn)
 			opt_warning=false
 func_append preserve_args " $opt"
 			;;

       --no-verbose)
 			opt_verbose=false
 func_append preserve_args " $opt"
 			;;
       --silent|--quiet)
 			opt_silent=:
 func_append preserve_args " $opt"
         opt_verbose=false
 			;;
       --verbose|-v)
 			opt_verbose=:
 func_append preserve_args " $opt"
 opt_silent=false
 			;;
       --tag)
 			test $# = 0 && func_missing_arg $opt && break
 			optarg="$1"
 			opt_tag="$optarg"
 func_append preserve_args " $opt $optarg"
 func_enable_tag "$optarg"

 			shift
 			;;
 

       -\?|-h)		func_usage				;;
       --help)		func_help				;;
       --version)	func_version				;;
 

       # Separate optargs to long options:

       --*=*)
 			func_split_long_opt "$opt"
 			set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}

 			shift
 			;;
 

       # Separate non-argument short options:
       -\?*|-h*|-n*|-v*)
 			func_split_short_opt "$opt"
 			set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
 			shift

 			;;

 
       --)		break					;;
       -*)		func_fatal_help "unrecognized option \`$opt'" ;;
       *)		set dummy "$opt" ${1+"$@"};	shift; break  ;;

     esac
   done
 

   # Validate options:
 
   # save first non-option argument
   if test "$#" -gt 0; then
     nonopt="$opt"
     shift
   fi
 
   # preserve --debug
   test "$opt_debug" = : || func_append preserve_args " --debug"

 
   case $host in
     *cygwin* | *mingw* | *pw32* | *cegcc*)
       # don't eliminate duplications in $postdeps and $predeps
       opt_duplicate_compiler_generated_deps=:

       ;;
     *)

       opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps

       ;;
   esac

   $opt_help || {
     # Sanity checks first:
     func_check_version_match

     if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
       func_fatal_configuration "not configured to build any kind of library"

     fi
 

     # Darwin sucks
     eval std_shrext=\"$shrext_cmds\"

     # Only execute mode is allowed to have -dlopen flags.
     if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
       func_error "unrecognized option \`-dlopen'"
       $ECHO "$help" 1>&2
       exit $EXIT_FAILURE
     fi

     # Change the help message to a mode-specific one.
     generic_help="$help"
     help="Try \`$progname --help --mode=$opt_mode' for more information."
   }

   # Bail if the options were screwed
   $exit_cmd $EXIT_FAILURE
 }

 ## ----------- ##
 ##    Main.    ##
 ## ----------- ##

 
 # func_lalib_p file
 # True iff FILE is a libtool `.la' library or `.lo' object file.
 # This function is only a basic sanity check; it will hardly flush out
 # determined imposters.
 func_lalib_p ()
 {
     test -f "$1" &&
       $SED -e 4q "$1" 2>/dev/null \
         | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
 }
 
 # func_lalib_unsafe_p file
 # True iff FILE is a libtool `.la' library or `.lo' object file.
 # This function implements the same check as func_lalib_p without
 # resorting to external programs.  To this end, it redirects stdin and
 # closes it afterwards, without saving the original file descriptor.
 # As a safety measure, use it only where a negative result would be
 # fatal anyway.  Works if `file' does not exist.
 func_lalib_unsafe_p ()
 {
     lalib_p=no
     if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
 	for lalib_p_l in 1 2 3 4
 	do
 	    read lalib_p_line
 	    case "$lalib_p_line" in
 		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
 	    esac
 	done
 	exec 0<&5 5<&-
     fi
     test "$lalib_p" = yes
 }
 
 # func_ltwrapper_script_p file
 # True iff FILE is a libtool wrapper script
 # This function is only a basic sanity check; it will hardly flush out
 # determined imposters.
 func_ltwrapper_script_p ()
 {
     func_lalib_p "$1"
 }
 
 # func_ltwrapper_executable_p file
 # True iff FILE is a libtool wrapper executable
 # This function is only a basic sanity check; it will hardly flush out
 # determined imposters.
 func_ltwrapper_executable_p ()
 {
     func_ltwrapper_exec_suffix=
     case $1 in
     *.exe) ;;
     *) func_ltwrapper_exec_suffix=.exe ;;
     esac
     $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
 }
 
 # func_ltwrapper_scriptname file
 # Assumes file is an ltwrapper_executable
 # uses $file to determine the appropriate filename for a
 # temporary ltwrapper_script.
 func_ltwrapper_scriptname ()
 {

     func_dirname_and_basename "$1" "" "."
     func_stripname '' '.exe' "$func_basename_result"
     func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"

 }
 
 # func_ltwrapper_p file
 # True iff FILE is a libtool wrapper script or wrapper executable
 # This function is only a basic sanity check; it will hardly flush out
 # determined imposters.
 func_ltwrapper_p ()
 {
     func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
 }
 
 
 # func_execute_cmds commands fail_cmd
 # Execute tilde-delimited COMMANDS.
 # If FAIL_CMD is given, eval that upon failure.
 # FAIL_CMD may read-access the current command in variable CMD!
 func_execute_cmds ()
 {
     $opt_debug
     save_ifs=$IFS; IFS='~'
     for cmd in $1; do
       IFS=$save_ifs
       eval cmd=\"$cmd\"
       func_show_eval "$cmd" "${2-:}"
     done
     IFS=$save_ifs
 }

 
 # func_source file
 # Source FILE, adding directory component if necessary.
 # Note that it is not necessary on cygwin/mingw to append a dot to
 # FILE even if both FILE and FILE.exe exist: automatic-append-.exe
 # behavior happens only for exec(3), not for open(2)!  Also, sourcing
 # `FILE.' does not work on cygwin managed mounts.
 func_source ()
 {
     $opt_debug
     case $1 in
     */* | *\\*)	. "$1" ;;
     *)		. "./$1" ;;
     esac
 }
 
 

 # func_resolve_sysroot PATH
 # Replace a leading = in PATH with a sysroot.  Store the result into
 # func_resolve_sysroot_result
 func_resolve_sysroot ()
 {
   func_resolve_sysroot_result=$1
   case $func_resolve_sysroot_result in
   =*)
     func_stripname '=' '' "$func_resolve_sysroot_result"
     func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
     ;;
   esac
 }
 
 # func_replace_sysroot PATH
 # If PATH begins with the sysroot, replace it with = and
 # store the result into func_replace_sysroot_result.
 func_replace_sysroot ()
 {
   case "$lt_sysroot:$1" in
   ?*:"$lt_sysroot"*)
     func_stripname "$lt_sysroot" '' "$1"
     func_replace_sysroot_result="=$func_stripname_result"
     ;;
   *)
     # Including no sysroot.
     func_replace_sysroot_result=$1
     ;;
   esac
 }
 

 # func_infer_tag arg
 # Infer tagged configuration to use if any are available and
 # if one wasn't chosen via the "--tag" command line option.
 # Only attempt this if the compiler in the base compile
 # command doesn't match the default compiler.
 # arg is usually of the form 'gcc ...'
 func_infer_tag ()
 {
     $opt_debug
     if test -n "$available_tags" && test -z "$tagname"; then
       CC_quoted=
       for arg in $CC; do

 	func_append_quoted CC_quoted "$arg"

       done

       CC_expanded=`func_echo_all $CC`
       CC_quoted_expanded=`func_echo_all $CC_quoted`

       case $@ in
       # Blanks in the command may have been stripped by the calling shell,
       # but not from the CC environment variable when configure was run.

       " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
       " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;

       # Blanks at the start of $base_compile will cause this to fail
       # if we don't check for them as well.
       *)
 	for z in $available_tags; do
 	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
 	    # Evaluate the configuration.
 	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
 	    CC_quoted=
 	    for arg in $CC; do
 	      # Double-quote args containing other shell metacharacters.

 	      func_append_quoted CC_quoted "$arg"

 	    done

 	    CC_expanded=`func_echo_all $CC`
 	    CC_quoted_expanded=`func_echo_all $CC_quoted`

 	    case "$@ " in

 	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
 	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)

 	      # The compiler in the base compile command matches
 	      # the one in the tagged configuration.
 	      # Assume this is the tagged configuration we want.
 	      tagname=$z
 	      break
 	      ;;
 	    esac

 	  fi

 	done
 	# If $tagname still isn't set, then no tagged configuration
 	# was found and let the user know that the "--tag" command
 	# line option must be used.
 	if test -z "$tagname"; then
 	  func_echo "unable to infer tagged configuration"
 	  func_fatal_error "specify a tag with \`--tag'"
 #	else
 #	  func_verbose "using $tagname tagged configuration"
 	fi
 	;;
       esac
     fi
 }
 
 
 
 # func_write_libtool_object output_name pic_name nonpic_name
 # Create a libtool object file (analogous to a ".la" file),
 # but don't create it if we're doing a dry run.
 func_write_libtool_object ()
 {
     write_libobj=${1}
     if test "$build_libtool_libs" = yes; then
       write_lobj=\'${2}\'
     else
       write_lobj=none
     fi
 
     if test "$build_old_libs" = yes; then
       write_oldobj=\'${3}\'
     else
       write_oldobj=none
     fi
 
     $opt_dry_run || {
       cat >${write_libobj}T <<EOF
 # $write_libobj - a libtool object file
 # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
 #
 # Please DO NOT delete this file!
 # It is necessary for linking the library.
 
 # Name of the PIC object.
 pic_object=$write_lobj
 
 # Name of the non-PIC object
 non_pic_object=$write_oldobj
 
 EOF
       $MV "${write_libobj}T" "${write_libobj}"
     }
 }
 

 
 ##################################################
 # FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
 ##################################################
 
 # func_convert_core_file_wine_to_w32 ARG
 # Helper function used by file name conversion functions when $build is *nix,
 # and $host is mingw, cygwin, or some other w32 environment. Relies on a
 # correctly configured wine environment available, with the winepath program
 # in $build's $PATH.
 #
 # ARG is the $build file name to be converted to w32 format.
 # Result is available in $func_convert_core_file_wine_to_w32_result, and will
 # be empty on error (or when ARG is empty)
 func_convert_core_file_wine_to_w32 ()
 {
   $opt_debug
   func_convert_core_file_wine_to_w32_result="$1"
   if test -n "$1"; then
     # Unfortunately, winepath does not exit with a non-zero error code, so we
     # are forced to check the contents of stdout. On the other hand, if the
     # command is not found, the shell will set an exit code of 127 and print
     # *an error message* to stdout. So we must check for both error code of
     # zero AND non-empty stdout, which explains the odd construction:
     func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
     if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
       func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
         $SED -e "$lt_sed_naive_backslashify"`
     else
       func_convert_core_file_wine_to_w32_result=
     fi
   fi
 }
 # end: func_convert_core_file_wine_to_w32
 
 
 # func_convert_core_path_wine_to_w32 ARG
 # Helper function used by path conversion functions when $build is *nix, and
 # $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
 # configured wine environment available, with the winepath program in $build's
 # $PATH. Assumes ARG has no leading or trailing path separator characters.
 #
 # ARG is path to be converted from $build format to win32.
 # Result is available in $func_convert_core_path_wine_to_w32_result.
 # Unconvertible file (directory) names in ARG are skipped; if no directory names
 # are convertible, then the result may be empty.
 func_convert_core_path_wine_to_w32 ()
 {
   $opt_debug
   # unfortunately, winepath doesn't convert paths, only file names
   func_convert_core_path_wine_to_w32_result=""
   if test -n "$1"; then
     oldIFS=$IFS
     IFS=:
     for func_convert_core_path_wine_to_w32_f in $1; do
       IFS=$oldIFS
       func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
       if test -n "$func_convert_core_file_wine_to_w32_result" ; then
         if test -z "$func_convert_core_path_wine_to_w32_result"; then
           func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
         else
           func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
         fi
       fi
     done
     IFS=$oldIFS
   fi
 }
 # end: func_convert_core_path_wine_to_w32
 
 
 # func_cygpath ARGS...
 # Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
 # when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
 # $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
 # (2), returns the Cygwin file name or path in func_cygpath_result (input
 # file name or path is assumed to be in w32 format, as previously converted
 # from $build's *nix or MSYS format). In case (3), returns the w32 file name
 # or path in func_cygpath_result (input file name or path is assumed to be in
 # Cygwin format). Returns an empty string on error.
 #
 # ARGS are passed to cygpath, with the last one being the file name or path to
 # be converted.
 #
 # Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
 # environment variable; do not put it in $PATH.
 func_cygpath ()
 {
   $opt_debug
   if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
     func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
     if test "$?" -ne 0; then
       # on failure, ensure result is empty
       func_cygpath_result=
     fi
   else
     func_cygpath_result=
     func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
   fi
 }
 #end: func_cygpath
 
 
 # func_convert_core_msys_to_w32 ARG
 # Convert file name or path ARG from MSYS format to w32 format.  Return
 # result in func_convert_core_msys_to_w32_result.
 func_convert_core_msys_to_w32 ()
 {
   $opt_debug
   # awkward: cmd appends spaces to result
   func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
     $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
 }
 #end: func_convert_core_msys_to_w32
 
 
 # func_convert_file_check ARG1 ARG2
 # Verify that ARG1 (a file name in $build format) was converted to $host
 # format in ARG2. Otherwise, emit an error message, but continue (resetting
 # func_to_host_file_result to ARG1).
 func_convert_file_check ()
 {
   $opt_debug
   if test -z "$2" && test -n "$1" ; then
     func_error "Could not determine host file name corresponding to"
     func_error "  \`$1'"
     func_error "Continuing, but uninstalled executables may not work."
     # Fallback:
     func_to_host_file_result="$1"
   fi
 }
 # end func_convert_file_check
 
 
 # func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
 # Verify that FROM_PATH (a path in $build format) was converted to $host
 # format in TO_PATH. Otherwise, emit an error message, but continue, resetting
 # func_to_host_file_result to a simplistic fallback value (see below).
 func_convert_path_check ()
 {
   $opt_debug
   if test -z "$4" && test -n "$3"; then
     func_error "Could not determine the host path corresponding to"
     func_error "  \`$3'"
     func_error "Continuing, but uninstalled executables may not work."
     # Fallback.  This is a deliberately simplistic "conversion" and
     # should not be "improved".  See libtool.info.
     if test "x$1" != "x$2"; then
       lt_replace_pathsep_chars="s|$1|$2|g"
       func_to_host_path_result=`echo "$3" |
         $SED -e "$lt_replace_pathsep_chars"`
     else
       func_to_host_path_result="$3"
     fi
   fi
 }
 # end func_convert_path_check
 
 
 # func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
 # Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
 # and appending REPL if ORIG matches BACKPAT.
 func_convert_path_front_back_pathsep ()
 {
   $opt_debug
   case $4 in
   $1 ) func_to_host_path_result="$3$func_to_host_path_result"
     ;;
   esac
   case $4 in
   $2 ) func_append func_to_host_path_result "$3"
     ;;
   esac
 }
 # end func_convert_path_front_back_pathsep
 
 
 ##################################################
 # $build to $host FILE NAME CONVERSION FUNCTIONS #
 ##################################################
 # invoked via `$to_host_file_cmd ARG'
 #
 # In each case, ARG is the path to be converted from $build to $host format.
 # Result will be available in $func_to_host_file_result.
 
 
 # func_to_host_file ARG
 # Converts the file name ARG from $build format to $host format. Return result
 # in func_to_host_file_result.
 func_to_host_file ()
 {
   $opt_debug
   $to_host_file_cmd "$1"
 }
 # end func_to_host_file
 
 
 # func_to_tool_file ARG LAZY
 # converts the file name ARG from $build format to toolchain format. Return
 # result in func_to_tool_file_result.  If the conversion in use is listed
 # in (the comma separated) LAZY, no conversion takes place.
 func_to_tool_file ()
 {
   $opt_debug
   case ,$2, in
     *,"$to_tool_file_cmd",*)
       func_to_tool_file_result=$1
       ;;
     *)
       $to_tool_file_cmd "$1"
       func_to_tool_file_result=$func_to_host_file_result
       ;;
   esac
 }
 # end func_to_tool_file
 
 
 # func_convert_file_noop ARG
 # Copy ARG to func_to_host_file_result.
 func_convert_file_noop ()
 {
   func_to_host_file_result="$1"
 }
 # end func_convert_file_noop
 
 
 # func_convert_file_msys_to_w32 ARG
 # Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
 # conversion to w32 is not available inside the cwrapper.  Returns result in
 # func_to_host_file_result.
 func_convert_file_msys_to_w32 ()
 {
   $opt_debug
   func_to_host_file_result="$1"
   if test -n "$1"; then
     func_convert_core_msys_to_w32 "$1"
     func_to_host_file_result="$func_convert_core_msys_to_w32_result"
   fi
   func_convert_file_check "$1" "$func_to_host_file_result"
 }
 # end func_convert_file_msys_to_w32
 
 
 # func_convert_file_cygwin_to_w32 ARG
 # Convert file name ARG from Cygwin to w32 format.  Returns result in
 # func_to_host_file_result.
 func_convert_file_cygwin_to_w32 ()
 {
   $opt_debug
   func_to_host_file_result="$1"
   if test -n "$1"; then
     # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
     # LT_CYGPATH in this case.
     func_to_host_file_result=`cygpath -m "$1"`
   fi
   func_convert_file_check "$1" "$func_to_host_file_result"
 }
 # end func_convert_file_cygwin_to_w32
 
 
 # func_convert_file_nix_to_w32 ARG
 # Convert file name ARG from *nix to w32 format.  Requires a wine environment
 # and a working winepath. Returns result in func_to_host_file_result.
 func_convert_file_nix_to_w32 ()
 {
   $opt_debug
   func_to_host_file_result="$1"
   if test -n "$1"; then
     func_convert_core_file_wine_to_w32 "$1"
     func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
   fi
   func_convert_file_check "$1" "$func_to_host_file_result"
 }
 # end func_convert_file_nix_to_w32
 
 
 # func_convert_file_msys_to_cygwin ARG
 # Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
 # Returns result in func_to_host_file_result.
 func_convert_file_msys_to_cygwin ()
 {
   $opt_debug
   func_to_host_file_result="$1"
   if test -n "$1"; then
     func_convert_core_msys_to_w32 "$1"
     func_cygpath -u "$func_convert_core_msys_to_w32_result"
     func_to_host_file_result="$func_cygpath_result"
   fi
   func_convert_file_check "$1" "$func_to_host_file_result"
 }
 # end func_convert_file_msys_to_cygwin
 
 
 # func_convert_file_nix_to_cygwin ARG
 # Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
 # in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
 # in func_to_host_file_result.
 func_convert_file_nix_to_cygwin ()
 {
   $opt_debug
   func_to_host_file_result="$1"
   if test -n "$1"; then
     # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
     func_convert_core_file_wine_to_w32 "$1"
     func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
     func_to_host_file_result="$func_cygpath_result"
   fi
   func_convert_file_check "$1" "$func_to_host_file_result"
 }
 # end func_convert_file_nix_to_cygwin
 
 
 #############################################
 # $build to $host PATH CONVERSION FUNCTIONS #
 #############################################
 # invoked via `$to_host_path_cmd ARG'
 #
 # In each case, ARG is the path to be converted from $build to $host format.
 # The result will be available in $func_to_host_path_result.
 #
 # Path separators are also converted from $build format to $host format.  If
 # ARG begins or ends with a path separator character, it is preserved (but
 # converted to $host format) on output.
 #
 # All path conversion functions are named using the following convention:
 #   file name conversion function    : func_convert_file_X_to_Y ()
 #   path conversion function         : func_convert_path_X_to_Y ()
 # where, for any given $build/$host combination the 'X_to_Y' value is the
 # same.  If conversion functions are added for new $build/$host combinations,
 # the two new functions must follow this pattern, or func_init_to_host_path_cmd
 # will break.
 
 
 # func_init_to_host_path_cmd
 # Ensures that function "pointer" variable $to_host_path_cmd is set to the
 # appropriate value, based on the value of $to_host_file_cmd.
 to_host_path_cmd=
 func_init_to_host_path_cmd ()
 {
   $opt_debug
   if test -z "$to_host_path_cmd"; then
     func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
     to_host_path_cmd="func_convert_path_${func_stripname_result}"
   fi
 }
 
 
 # func_to_host_path ARG
 # Converts the path ARG from $build format to $host format. Return result
 # in func_to_host_path_result.
 func_to_host_path ()
 {
   $opt_debug
   func_init_to_host_path_cmd
   $to_host_path_cmd "$1"
 }
 # end func_to_host_path
 
 
 # func_convert_path_noop ARG
 # Copy ARG to func_to_host_path_result.
 func_convert_path_noop ()
 {
   func_to_host_path_result="$1"
 }
 # end func_convert_path_noop
 
 
 # func_convert_path_msys_to_w32 ARG
 # Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
 # conversion to w32 is not available inside the cwrapper.  Returns result in
 # func_to_host_path_result.
 func_convert_path_msys_to_w32 ()
 {
   $opt_debug
   func_to_host_path_result="$1"
   if test -n "$1"; then
     # Remove leading and trailing path separator characters from ARG.  MSYS
     # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
     # and winepath ignores them completely.
     func_stripname : : "$1"
     func_to_host_path_tmp1=$func_stripname_result
     func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
     func_to_host_path_result="$func_convert_core_msys_to_w32_result"
     func_convert_path_check : ";" \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
   fi
 }
 # end func_convert_path_msys_to_w32
 
 
 # func_convert_path_cygwin_to_w32 ARG
 # Convert path ARG from Cygwin to w32 format.  Returns result in
 # func_to_host_file_result.
 func_convert_path_cygwin_to_w32 ()
 {
   $opt_debug
   func_to_host_path_result="$1"
   if test -n "$1"; then
     # See func_convert_path_msys_to_w32:
     func_stripname : : "$1"
     func_to_host_path_tmp1=$func_stripname_result
     func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
     func_convert_path_check : ";" \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
   fi
 }
 # end func_convert_path_cygwin_to_w32
 
 
 # func_convert_path_nix_to_w32 ARG
 # Convert path ARG from *nix to w32 format.  Requires a wine environment and
 # a working winepath.  Returns result in func_to_host_file_result.
 func_convert_path_nix_to_w32 ()
 {
   $opt_debug
   func_to_host_path_result="$1"
   if test -n "$1"; then
     # See func_convert_path_msys_to_w32:
     func_stripname : : "$1"
     func_to_host_path_tmp1=$func_stripname_result
     func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
     func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
     func_convert_path_check : ";" \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
   fi
 }
 # end func_convert_path_nix_to_w32
 
 
 # func_convert_path_msys_to_cygwin ARG
 # Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
 # Returns result in func_to_host_file_result.
 func_convert_path_msys_to_cygwin ()
 {
   $opt_debug
   func_to_host_path_result="$1"
   if test -n "$1"; then
     # See func_convert_path_msys_to_w32:
     func_stripname : : "$1"
     func_to_host_path_tmp1=$func_stripname_result
     func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
     func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
     func_to_host_path_result="$func_cygpath_result"
     func_convert_path_check : : \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" : "$1"
   fi
 }
 # end func_convert_path_msys_to_cygwin
 
 
 # func_convert_path_nix_to_cygwin ARG
 # Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
 # a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
 # func_to_host_file_result.
 func_convert_path_nix_to_cygwin ()
 {
   $opt_debug
   func_to_host_path_result="$1"
   if test -n "$1"; then
     # Remove leading and trailing path separator characters from
     # ARG. msys behavior is inconsistent here, cygpath turns them
     # into '.;' and ';.', and winepath ignores them completely.
     func_stripname : : "$1"
     func_to_host_path_tmp1=$func_stripname_result
     func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
     func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
     func_to_host_path_result="$func_cygpath_result"
     func_convert_path_check : : \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" : "$1"
   fi
 }
 # end func_convert_path_nix_to_cygwin
 
 

 # func_mode_compile arg...
 func_mode_compile ()
 {
     $opt_debug

     # Get the compilation command and the source file.
     base_compile=
     srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
     suppress_opt=yes
     suppress_output=
     arg_mode=normal
     libobj=
     later=

     pie_flag=

 
     for arg
     do
       case $arg_mode in
       arg  )
 	# do not "continue".  Instead, add this to base_compile
 	lastarg="$arg"
 	arg_mode=normal
 	;;
 
       target )
 	libobj="$arg"
 	arg_mode=normal
 	continue
 	;;
 
       normal )
 	# Accept any command-line options.
 	case $arg in
 	-o)

 	  test -n "$libobj" && \
 	    func_fatal_error "you cannot specify \`-o' more than once"

 	  arg_mode=target
 	  continue
 	  ;;
 

 	-pie | -fpie | -fPIE)

           func_append pie_flag " $arg"

 	  continue
 	  ;;
 
 	-shared | -static | -prefer-pic | -prefer-non-pic)

 	  func_append later " $arg"

 	  continue
 	  ;;
 
 	-no-suppress)
 	  suppress_opt=no
 	  continue
 	  ;;
 
 	-Xcompiler)
 	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
 	  continue      #  The current "srcfile" will either be retained or
 	  ;;            #  replaced later.  I would guess that would be a bug.
 
 	-Wc,*)

 	  func_stripname '-Wc,' '' "$arg"
 	  args=$func_stripname_result

 	  lastarg=
 	  save_ifs="$IFS"; IFS=','

 	  for arg in $args; do

 	    IFS="$save_ifs"

 	    func_append_quoted lastarg "$arg"

 	  done
 	  IFS="$save_ifs"

 	  func_stripname ' ' '' "$lastarg"
 	  lastarg=$func_stripname_result

 
 	  # Add the arguments to base_compile.

 	  func_append base_compile " $lastarg"

 	  continue
 	  ;;
 

 	*)

 	  # Accept the current argument as the source file.
 	  # The previous "srcfile" becomes the current argument.
 	  #
 	  lastarg="$srcfile"
 	  srcfile="$arg"
 	  ;;
 	esac  #  case $arg
 	;;
       esac    #  case $arg_mode
 
       # Aesthetically quote the previous argument.

       func_append_quoted base_compile "$lastarg"

     done # for arg
 
     case $arg_mode in
     arg)

       func_fatal_error "you must specify an argument for -Xcompile"

       ;;
     target)

       func_fatal_error "you must specify a target with \`-o'"

       ;;
     *)
       # Get the name of the library object.

       test -z "$libobj" && {
 	func_basename "$srcfile"
 	libobj="$func_basename_result"
       }

       ;;
     esac
 
     # Recognize several different file suffixes.
     # If the user specifies -o file.o, it is replaced with file.lo
     case $libobj in

     *.[cCFSifmso] | \
     *.ada | *.adb | *.ads | *.asm | \
     *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \

     *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)

       func_xform "$libobj"
       libobj=$func_xform_result
       ;;

     esac
 
     case $libobj in

     *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;

     *)

       func_fatal_error "cannot determine name of library object from \`$libobj'"

       ;;
     esac
 
     func_infer_tag $base_compile
 
     for arg in $later; do
       case $arg in

       -shared)
 	test "$build_libtool_libs" != yes && \
 	  func_fatal_configuration "can not build a shared library"
 	build_old_libs=no
 	continue
 	;;
 

       -static)

 	build_libtool_libs=no

 	build_old_libs=yes
 	continue
 	;;
 
       -prefer-pic)
 	pic_mode=yes
 	continue
 	;;
 
       -prefer-non-pic)
 	pic_mode=no
 	continue
 	;;
       esac
     done
 

     func_quote_for_eval "$libobj"
     test "X$libobj" != "X$func_quote_for_eval_result" \
       && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
       && func_warning "libobj name \`$libobj' may not contain shell special characters."
     func_dirname_and_basename "$obj" "/" ""
     objname="$func_basename_result"
     xdir="$func_dirname_result"

     lobj=${xdir}$objdir/$objname
 

     test -z "$base_compile" && \
       func_fatal_help "you must specify a compilation command"

 
     # Delete any leftover library objects.
     if test "$build_old_libs" = yes; then
       removelist="$obj $lobj $libobj ${libobj}T"
     else
       removelist="$lobj $libobj ${libobj}T"
     fi
 
     # On Cygwin there's no "real" PIC flag so we must build both object types
     case $host_os in

     cygwin* | mingw* | pw32* | os2* | cegcc*)

       pic_mode=default
       ;;
     esac
     if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
       # non-PIC code in shared libraries is not supported
       pic_mode=default
     fi
 
     # Calculate the filename of the output object if compiler does
     # not support -o with -c
     if test "$compiler_c_o" = no; then

       output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}

       lockfile="$output_obj.lock"
     else
       output_obj=
       need_locks=no
       lockfile=
     fi
 
     # Lock this critical section if it is needed
     # We use this script file to make the link, it avoids creating a new file
     if test "$need_locks" = yes; then

       until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
 	func_echo "Waiting for $lockfile to be removed"

 	sleep 2
       done
     elif test "$need_locks" = warn; then
       if test -f "$lockfile"; then

 	$ECHO "\

 *** ERROR, $lockfile exists and contains:
 `cat $lockfile 2>/dev/null`
 
 This indicates that another process is trying to use the same
 temporary object file, and libtool could not work around it because
 your compiler does not support \`-c' and \`-o' together.  If you
 repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 

 	$opt_dry_run || $RM $removelist

 	exit $EXIT_FAILURE
       fi

       func_append removelist " $output_obj"

       $ECHO "$srcfile" > "$lockfile"

     fi
 

     $opt_dry_run || $RM $removelist

     func_append removelist " $lockfile"

     trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
 

     func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
     srcfile=$func_to_tool_file_result

     func_quote_for_eval "$srcfile"
     qsrcfile=$func_quote_for_eval_result

 
     # Only build a PIC object if we are building libtool libraries.
     if test "$build_libtool_libs" = yes; then
       # Without this assignment, base_compile gets emptied.
       fbsd_hideous_sh_bug=$base_compile
 
       if test "$pic_mode" != no; then
 	command="$base_compile $qsrcfile $pic_flag"
       else
 	# Don't build PIC code
 	command="$base_compile $qsrcfile"
       fi
 

       func_mkdir_p "$xdir$objdir"

 
       if test -z "$output_obj"; then
 	# Place PIC objects in $objdir

 	func_append command " -o $lobj"

       fi
 

       func_show_eval_locale "$command"	\
           'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'

 
       if test "$need_locks" = warn &&
 	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then

 	$ECHO "\

 *** ERROR, $lockfile contains:
 `cat $lockfile 2>/dev/null`
 
 but it should contain:
 $srcfile
 
 This indicates that another process is trying to use the same
 temporary object file, and libtool could not work around it because
 your compiler does not support \`-c' and \`-o' together.  If you
 repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 

 	$opt_dry_run || $RM $removelist

 	exit $EXIT_FAILURE
       fi
 
       # Just move the object if needed, then go on to compile the next one
       if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then

 	func_show_eval '$MV "$output_obj" "$lobj"' \
 	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'

       fi
 
       # Allow error messages only from the first compilation.
       if test "$suppress_opt" = yes; then

 	suppress_output=' >/dev/null 2>&1'

       fi
     fi
 
     # Only build a position-dependent object if we build old libraries.
     if test "$build_old_libs" = yes; then
       if test "$pic_mode" != yes; then
 	# Don't build PIC code

 	command="$base_compile $qsrcfile$pie_flag"

       else
 	command="$base_compile $qsrcfile $pic_flag"
       fi
       if test "$compiler_c_o" = yes; then

 	func_append command " -o $obj"

       fi
 
       # Suppress compiler output if we already did a PIC compilation.

       func_append command "$suppress_output"

       func_show_eval_locale "$command" \
         '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'

 
       if test "$need_locks" = warn &&
 	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then

 	$ECHO "\

 *** ERROR, $lockfile contains:
 `cat $lockfile 2>/dev/null`
 
 but it should contain:
 $srcfile
 
 This indicates that another process is trying to use the same
 temporary object file, and libtool could not work around it because
 your compiler does not support \`-c' and \`-o' together.  If you
 repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 

 	$opt_dry_run || $RM $removelist

 	exit $EXIT_FAILURE
       fi
 
       # Just move the object if needed
       if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then

 	func_show_eval '$MV "$output_obj" "$obj"' \
 	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
       fi
     fi
 
     $opt_dry_run || {
       func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
 
       # Unlock the critical section if it was locked
       if test "$need_locks" != no; then
 	removelist=$lockfile
         $RM "$lockfile"
       fi
     }
 
     exit $EXIT_SUCCESS
 }
 
 $opt_help || {

   test "$opt_mode" = compile && func_mode_compile ${1+"$@"}

 }
 
 func_mode_help ()
 {
     # We need to display help for each of the modes.

     case $opt_mode in

       "")
         # Generic help is extracted from the usage comments
         # at the start of this file.
         func_help
         ;;
 
       clean)
         $ECHO \
 "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
 
 Remove files from the build directory.
 
 RM is the name of the program to use to delete files associated with each FILE
 (typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
 to RM.
 
 If FILE is a libtool library, object or program, all the files associated
 with it are deleted. Otherwise, only FILE itself is deleted using RM."
         ;;
 
       compile)
       $ECHO \
 "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
 
 Compile a source file into a libtool library object.
 
 This mode accepts the following additional options:
 
   -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
   -no-suppress      do not suppress compiler output for multiple passes

   -prefer-pic       try to build PIC objects only
   -prefer-non-pic   try to build non-PIC objects only

   -shared           do not build a \`.o' file suitable for static linking
   -static           only build a \`.o' file suitable for static linking

   -Wc,FLAG          pass FLAG directly to the compiler

 
 COMPILE-COMMAND is a command to be used in creating a \`standard' object file
 from the given SOURCEFILE.
 
 The output file name is determined by removing the directory component from
 SOURCEFILE, then substituting the C source code suffix \`.c' with the
 library object suffix, \`.lo'."
         ;;
 
       execute)
         $ECHO \
 "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
 
 Automatically set library path, then run a program.
 
 This mode accepts the following additional options:
 
   -dlopen FILE      add the directory containing FILE to the library path
 
 This mode sets the library path environment variable according to \`-dlopen'
 flags.
 
 If any of the ARGS are libtool executable wrappers, then they are translated
 into their corresponding uninstalled binary, and any of their required library
 directories are added to the library path.
 
 Then, COMMAND is executed, with ARGS as arguments."
         ;;
 
       finish)
         $ECHO \
 "Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
 
 Complete the installation of libtool libraries.
 
 Each LIBDIR is a directory that contains libtool libraries.
 
 The commands that this mode executes may require superuser privileges.  Use
 the \`--dry-run' option if you just want to see what would be executed."
         ;;
 
       install)
         $ECHO \
 "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
 
 Install executables or libraries.
 
 INSTALL-COMMAND is the installation command.  The first component should be
 either the \`install' or \`cp' program.
 
 The following components of INSTALL-COMMAND are treated specially:
 

   -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation

 
 The rest of the components are interpreted as arguments to that command (only
 BSD-compatible install options are recognized)."
         ;;
 
       link)
         $ECHO \
 "Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
 
 Link object files or libraries together to form another library, or to
 create an executable program.
 
 LINK-COMMAND is a command using the C compiler that you would use to create
 a program from several object files.
 
 The following components of LINK-COMMAND are treated specially:
 
   -all-static       do not do any dynamic linking at all
   -avoid-version    do not add a version suffix if possible

   -bindir BINDIR    specify path to binaries directory (for systems where
                     libraries must be found in the PATH setting at runtime)

   -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
   -export-symbols SYMFILE
                     try to export only the symbols listed in SYMFILE
   -export-symbols-regex REGEX
                     try to export only the symbols matching REGEX
   -LLIBDIR          search LIBDIR for required installed libraries
   -lNAME            OUTPUT-FILE requires the installed library libNAME
   -module           build a library that can dlopened
   -no-fast-install  disable the fast-install mode
   -no-install       link a not-installable executable
   -no-undefined     declare that a library does not refer to external symbols
   -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
   -objectlist FILE  Use a list of object files found in FILE to specify objects
   -precious-files-regex REGEX
                     don't remove output files matching REGEX
   -release RELEASE  specify package release information
   -rpath LIBDIR     the created library will eventually be installed in LIBDIR
   -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
   -shared           only do dynamic linking of libtool libraries
   -shrext SUFFIX    override the standard shared library file extension
   -static           do not do any dynamic linking of uninstalled libtool libraries
   -static-libtool-libs
                     do not do any dynamic linking of libtool libraries
   -version-info CURRENT[:REVISION[:AGE]]
                     specify library version info [each variable defaults to 0]
   -weak LIBNAME     declare that the target provides the LIBNAME interface

   -Wc,FLAG
   -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
   -Wl,FLAG
   -Xlinker FLAG     pass linker-specific FLAG directly to the linker
   -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)

 
 All other options (arguments beginning with \`-') are ignored.
 
 Every other argument is treated as a filename.  Files ending in \`.la' are
 treated as uninstalled libtool libraries, other files are standard or library
 object files.
 
 If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
 only library objects (\`.lo' files) may be specified, and \`-rpath' is
 required, except when creating a convenience library.
 
 If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
 using \`ar' and \`ranlib', or on Windows using \`lib'.
 
 If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
 is created, otherwise an executable program is created."
         ;;
 
       uninstall)
         $ECHO \
 "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
 
 Remove libraries from an installation directory.
 
 RM is the name of the program to use to delete files associated with each FILE
 (typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
 to RM.
 
 If FILE is a libtool library, all the files associated with it are deleted.
 Otherwise, only FILE itself is deleted using RM."
         ;;
 
       *)

         func_fatal_help "invalid operation mode \`$opt_mode'"

         ;;
     esac
 

     echo

     $ECHO "Try \`$progname --help' for more information about other modes."
 }
 

 # Now that we've collected a possible --mode arg, show help if necessary
 if $opt_help; then
   if test "$opt_help" = :; then
     func_mode_help
   else
     {
       func_help noexit
       for opt_mode in compile link execute install finish uninstall clean; do
 	func_mode_help
       done
     } | sed -n '1p; 2,$s/^Usage:/  or: /p'
     {
       func_help noexit
       for opt_mode in compile link execute install finish uninstall clean; do
 	echo
 	func_mode_help
       done
     } |
     sed '1d
       /^When reporting/,/^Report/{
 	H
 	d
       }
       $x
       /information about other modes/d
       /more detailed .*MODE/d
       s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
   fi
   exit $?
 fi

 
 
 # func_mode_execute arg...
 func_mode_execute ()
 {
     $opt_debug
     # The first argument is the command name.
     cmd="$nonopt"
     test -z "$cmd" && \
       func_fatal_help "you must specify a COMMAND"
 
     # Handle -dlopen flags immediately.

     for file in $opt_dlopen; do

       test -f "$file" \
 	|| func_fatal_help "\`$file' is not a file"
 
       dir=
       case $file in
       *.la)

 	func_resolve_sysroot "$file"
 	file=$func_resolve_sysroot_result
 

 	# Check to see that this really is a libtool archive.
 	func_lalib_unsafe_p "$file" \
 	  || func_fatal_help "\`$lib' is not a valid libtool archive"
 
 	# Read the libtool library.
 	dlname=
 	library_names=
 	func_source "$file"
 
 	# Skip this library if it cannot be dlopened.
 	if test -z "$dlname"; then
 	  # Warn if it was a shared library.
 	  test -n "$library_names" && \
 	    func_warning "\`$file' was not linked with \`-export-dynamic'"
 	  continue
 	fi
 
 	func_dirname "$file" "" "."
 	dir="$func_dirname_result"
 
 	if test -f "$dir/$objdir/$dlname"; then

 	  func_append dir "/$objdir"

 	else

 	  if test ! -f "$dir/$dlname"; then
 	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
 	  fi

 	fi

 	;;
 
       *.lo)
 	# Just add the directory containing the .lo file.
 	func_dirname "$file" "" "."
 	dir="$func_dirname_result"
 	;;
 
       *)
 	func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
 	continue
 	;;
       esac
 
       # Get the absolute pathname.
       absdir=`cd "$dir" && pwd`
       test -n "$absdir" && dir="$absdir"
 
       # Now add the directory to shlibpath_var.
       if eval "test -z \"\$$shlibpath_var\""; then
 	eval "$shlibpath_var=\"\$dir\""
       else
 	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""

       fi

     done

     # This variable tells wrapper scripts just to set shlibpath_var
     # rather than running their programs.
     libtool_execute_magic="$magic"

     # Check if any of the arguments is a wrapper script.
     args=
     for file
     do
       case $file in

       -* | *.la | *.lo ) ;;

       *)
 	# Do a test to see if this is really a libtool program.
 	if func_ltwrapper_script_p "$file"; then
 	  func_source "$file"
 	  # Transform arg to wrapped name.
 	  file="$progdir/$program"
 	elif func_ltwrapper_executable_p "$file"; then
 	  func_ltwrapper_scriptname "$file"
 	  func_source "$func_ltwrapper_scriptname_result"
 	  # Transform arg to wrapped name.
 	  file="$progdir/$program"
 	fi
 	;;
       esac
       # Quote arguments (to preserve shell metacharacters).

       func_append_quoted args "$file"

     done
 
     if test "X$opt_dry_run" = Xfalse; then
       if test -n "$shlibpath_var"; then
 	# Export the shlibpath_var.
 	eval "export $shlibpath_var"
       fi
 
       # Restore saved environment variables
       for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
       do
 	eval "if test \"\${save_$lt_var+set}\" = set; then
                 $lt_var=\$save_$lt_var; export $lt_var
 	      else
 		$lt_unset $lt_var
 	      fi"
       done
 
       # Now prepare to actually exec the command.
       exec_cmd="\$cmd$args"

     else

       # Display what would be done.
       if test -n "$shlibpath_var"; then
 	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""

 	echo "export $shlibpath_var"

       fi
       $ECHO "$cmd$args"
       exit $EXIT_SUCCESS
     fi
 }

 test "$opt_mode" = execute && func_mode_execute ${1+"$@"}

 
 
 # func_mode_finish arg...
 func_mode_finish ()
 {
     $opt_debug

     libs=
     libdirs=

     admincmds=
 

     for opt in "$nonopt" ${1+"$@"}
     do
       if test -d "$opt"; then
 	func_append libdirs " $opt"
 
       elif test -f "$opt"; then
 	if func_lalib_unsafe_p "$opt"; then
 	  func_append libs " $opt"
 	else
 	  func_warning "\`$opt' is not a valid libtool archive"
 	fi
 
       else
 	func_fatal_error "invalid argument \`$opt'"
       fi
     done
 
     if test -n "$libs"; then
       if test -n "$lt_sysroot"; then
         sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
         sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
       else
         sysroot_cmd=
       fi
 
       # Remove sysroot references
       if $opt_dry_run; then
         for lib in $libs; do
           echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
         done
       else
         tmpdir=`func_mktempdir`
         for lib in $libs; do
 	  sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
 	    > $tmpdir/tmp-la
 	  mv -f $tmpdir/tmp-la $lib
 	done
         ${RM}r "$tmpdir"
       fi
     fi

     if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then

       for libdir in $libdirs; do
 	if test -n "$finish_cmds"; then
 	  # Do each command in the finish commands.
 	  func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
 '"$cmd"'"'
 	fi
 	if test -n "$finish_eval"; then
 	  # Do the single finish_eval.
 	  eval cmds=\"$finish_eval\"

 	  $opt_dry_run || eval "$cmds" || func_append admincmds "

        $cmds"
 	fi
       done

     fi
 

     # Exit here if they wanted silent mode.
     $opt_silent && exit $EXIT_SUCCESS
 

     if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
       echo "----------------------------------------------------------------------"
       echo "Libraries have been installed in:"
       for libdir in $libdirs; do
 	$ECHO "   $libdir"
       done
       echo
       echo "If you ever happen to want to link against installed libraries"
       echo "in a given directory, LIBDIR, you must either use libtool, and"
       echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
       echo "flag during linking and do at least one of the following:"
       if test -n "$shlibpath_var"; then
 	echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
 	echo "     during execution"
       fi
       if test -n "$runpath_var"; then
 	echo "   - add LIBDIR to the \`$runpath_var' environment variable"
 	echo "     during linking"
       fi
       if test -n "$hardcode_libdir_flag_spec"; then
 	libdir=LIBDIR
 	eval flag=\"$hardcode_libdir_flag_spec\"

 	$ECHO "   - use the \`$flag' linker flag"
       fi
       if test -n "$admincmds"; then
 	$ECHO "   - have your system administrator run these commands:$admincmds"
       fi
       if test -f /etc/ld.so.conf; then
 	echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
       fi
       echo

       echo "See any operating system documentation about shared libraries for"
       case $host in
 	solaris2.[6789]|solaris2.1[0-9])
 	  echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
 	  echo "pages."
 	  ;;
 	*)
 	  echo "more information, such as the ld(1) and ld.so(8) manual pages."
 	  ;;
       esac
       echo "----------------------------------------------------------------------"
     fi

     exit $EXIT_SUCCESS

 }
 

 test "$opt_mode" = finish && func_mode_finish ${1+"$@"}

 
 
 # func_mode_install arg...
 func_mode_install ()
 {
     $opt_debug
     # There may be an optional sh(1) argument at the beginning of
     # install_prog (especially on Windows NT).
     if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
        # Allow the use of GNU shtool's install command.

        case $nonopt in *shtool*) :;; *) false;; esac; then

       # Aesthetically quote it.
       func_quote_for_eval "$nonopt"
       install_prog="$func_quote_for_eval_result "
       arg=$1
       shift
     else
       install_prog=
       arg=$nonopt
     fi
 
     # The real first argument should be the name of the installation program.
     # Aesthetically quote it.
     func_quote_for_eval "$arg"

     func_append install_prog "$func_quote_for_eval_result"
     install_shared_prog=$install_prog
     case " $install_prog " in
       *[\\\ /]cp\ *) install_cp=: ;;
       *) install_cp=false ;;
     esac

 
     # We need to accept at least all the BSD install flags.
     dest=
     files=
     opts=
     prev=
     install_type=
     isdir=no
     stripme=

     no_mode=:

     for arg
     do

       arg2=

       if test -n "$dest"; then

 	func_append files " $dest"

 	dest=$arg
 	continue
       fi
 
       case $arg in
       -d) isdir=yes ;;
       -f)

 	if $install_cp; then :; else
 	  prev=$arg
 	fi

 	;;
       -g | -m | -o)
 	prev=$arg
 	;;
       -s)
 	stripme=" -s"
 	continue
 	;;
       -*)
 	;;
       *)
 	# If the previous option needed an argument, then skip it.
 	if test -n "$prev"; then

 	  if test "x$prev" = x-m && test -n "$install_override_mode"; then
 	    arg2=$install_override_mode
 	    no_mode=false
 	  fi

 	  prev=
 	else
 	  dest=$arg
 	  continue
 	fi
 	;;
       esac
 
       # Aesthetically quote the argument.
       func_quote_for_eval "$arg"

       func_append install_prog " $func_quote_for_eval_result"
       if test -n "$arg2"; then
 	func_quote_for_eval "$arg2"
       fi
       func_append install_shared_prog " $func_quote_for_eval_result"

     done
 
     test -z "$install_prog" && \
       func_fatal_help "you must specify an install program"
 
     test -n "$prev" && \
       func_fatal_help "the \`$prev' option requires an argument"
 

     if test -n "$install_override_mode" && $no_mode; then
       if $install_cp; then :; else
 	func_quote_for_eval "$install_override_mode"
 	func_append install_shared_prog " -m $func_quote_for_eval_result"
       fi
     fi
 

     if test -z "$files"; then
       if test -z "$dest"; then
 	func_fatal_help "no file or destination specified"
       else
 	func_fatal_help "you must specify a destination"
       fi
     fi
 
     # Strip any trailing slash from the destination.
     func_stripname '' '/' "$dest"
     dest=$func_stripname_result
 
     # Check to see that the destination is a directory.
     test -d "$dest" && isdir=yes
     if test "$isdir" = yes; then
       destdir="$dest"
       destname=
     else
       func_dirname_and_basename "$dest" "" "."
       destdir="$func_dirname_result"
       destname="$func_basename_result"
 
       # Not a directory, so check to see that there is only one file specified.
       set dummy $files; shift
       test "$#" -gt 1 && \
 	func_fatal_help "\`$dest' is not a directory"
     fi
     case $destdir in
     [\\/]* | [A-Za-z]:[\\/]*) ;;
     *)
       for file in $files; do
 	case $file in
 	*.lo) ;;
 	*)
 	  func_fatal_help "\`$destdir' must be an absolute directory name"
 	  ;;
 	esac
       done
       ;;
     esac
 
     # This variable tells wrapper scripts just to set variables rather
     # than running their programs.
     libtool_install_magic="$magic"
 
     staticlibs=
     future_libdirs=
     current_libdirs=
     for file in $files; do
 
       # Do each installation.
       case $file in
       *.$libext)
 	# Do the static libraries later.

 	func_append staticlibs " $file"

 	;;
 
       *.la)

 	func_resolve_sysroot "$file"
 	file=$func_resolve_sysroot_result
 

 	# Check to see that this really is a libtool archive.
 	func_lalib_unsafe_p "$file" \
 	  || func_fatal_help "\`$file' is not a valid libtool archive"
 
 	library_names=
 	old_library=
 	relink_command=
 	func_source "$file"
 
 	# Add the libdir to current_libdirs if it is the destination.
 	if test "X$destdir" = "X$libdir"; then
 	  case "$current_libdirs " in
 	  *" $libdir "*) ;;

 	  *) func_append current_libdirs " $libdir" ;;

 	  esac
 	else
 	  # Note the libdir as a future libdir.
 	  case "$future_libdirs " in
 	  *" $libdir "*) ;;

 	  *) func_append future_libdirs " $libdir" ;;

 	  esac
 	fi
 
 	func_dirname "$file" "/" ""
 	dir="$func_dirname_result"

 	func_append dir "$objdir"

 
 	if test -n "$relink_command"; then
 	  # Determine the prefix the user has applied to our future dir.

 	  inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`

 
 	  # Don't allow the user to place us outside of our expected
 	  # location b/c this prevents finding dependent libraries that
 	  # are installed to the same prefix.
 	  # At present, this check doesn't affect windows .dll's that
 	  # are installed into $libdir/../bin (currently, that works fine)
 	  # but it's something to keep an eye on.
 	  test "$inst_prefix_dir" = "$destdir" && \
 	    func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
 
 	  if test -n "$inst_prefix_dir"; then
 	    # Stick the inst_prefix_dir data into the link command.

 	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`

 	  else

 	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`

 	  fi
 
 	  func_warning "relinking \`$file'"
 	  func_show_eval "$relink_command" \
 	    'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
 	fi
 
 	# See the names of the shared library.
 	set dummy $library_names; shift
 	if test -n "$1"; then
 	  realname="$1"
 	  shift
 
 	  srcname="$realname"
 	  test -n "$relink_command" && srcname="$realname"T
 
 	  # Install the shared library and build the symlinks.

 	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \

 	      'exit $?'
 	  tstripme="$stripme"
 	  case $host_os in
 	  cygwin* | mingw* | pw32* | cegcc*)
 	    case $realname in
 	    *.dll.a)
 	      tstripme=""
 	      ;;
 	    esac
 	    ;;
 	  esac
 	  if test -n "$tstripme" && test -n "$striplib"; then
 	    func_show_eval "$striplib $destdir/$realname" 'exit $?'
 	  fi
 
 	  if test "$#" -gt 0; then
 	    # Delete the old symlinks, and create new ones.
 	    # Try `ln -sf' first, because the `ln' binary might depend on
 	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
 	    # so we also need to try rm && ln -s.
 	    for linkname
 	    do
 	      test "$linkname" != "$realname" \
 		&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
 	    done
 	  fi
 
 	  # Do each command in the postinstall commands.
 	  lib="$destdir/$realname"
 	  func_execute_cmds "$postinstall_cmds" 'exit $?'
 	fi
 
 	# Install the pseudo-library for information purposes.
 	func_basename "$file"
 	name="$func_basename_result"
 	instname="$dir/$name"i
 	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
 
 	# Maybe install the static library, too.

 	test -n "$old_library" && func_append staticlibs " $dir/$old_library"

 	;;
 
       *.lo)
 	# Install (i.e. copy) a libtool object.
 
 	# Figure out destination file name, if it wasn't already specified.
 	if test -n "$destname"; then
 	  destfile="$destdir/$destname"
 	else
 	  func_basename "$file"
 	  destfile="$func_basename_result"
 	  destfile="$destdir/$destfile"
 	fi
 
 	# Deduce the name of the destination old-style object file.
 	case $destfile in
 	*.lo)
 	  func_lo2o "$destfile"
 	  staticdest=$func_lo2o_result
 	  ;;
 	*.$objext)
 	  staticdest="$destfile"
 	  destfile=
 	  ;;
 	*)
 	  func_fatal_help "cannot copy a libtool object to \`$destfile'"
 	  ;;
 	esac
 
 	# Install the libtool object if requested.
 	test -n "$destfile" && \
 	  func_show_eval "$install_prog $file $destfile" 'exit $?'
 
 	# Install the old object if enabled.
 	if test "$build_old_libs" = yes; then
 	  # Deduce the name of the old-style object file.
 	  func_lo2o "$file"
 	  staticobj=$func_lo2o_result
 	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
 	fi
 	exit $EXIT_SUCCESS
 	;;
 
       *)
 	# Figure out destination file name, if it wasn't already specified.
 	if test -n "$destname"; then
 	  destfile="$destdir/$destname"
 	else
 	  func_basename "$file"
 	  destfile="$func_basename_result"
 	  destfile="$destdir/$destfile"
 	fi
 
 	# If the file is missing, and there is a .exe on the end, strip it
 	# because it is most likely a libtool script we actually want to
 	# install
 	stripped_ext=""
 	case $file in
 	  *.exe)
 	    if test ! -f "$file"; then
 	      func_stripname '' '.exe' "$file"
 	      file=$func_stripname_result
 	      stripped_ext=".exe"
 	    fi
 	    ;;
 	esac
 
 	# Do a test to see if this is really a libtool program.
 	case $host in
 	*cygwin* | *mingw*)
 	    if func_ltwrapper_executable_p "$file"; then
 	      func_ltwrapper_scriptname "$file"
 	      wrapper=$func_ltwrapper_scriptname_result
 	    else
 	      func_stripname '' '.exe' "$file"
 	      wrapper=$func_stripname_result
 	    fi
 	    ;;
 	*)
 	    wrapper=$file
 	    ;;
 	esac
 	if func_ltwrapper_script_p "$wrapper"; then
 	  notinst_deplibs=
 	  relink_command=
 
 	  func_source "$wrapper"
 
 	  # Check the variables that should have been set.
 	  test -z "$generated_by_libtool_version" && \
 	    func_fatal_error "invalid libtool wrapper script \`$wrapper'"
 
 	  finalize=yes
 	  for lib in $notinst_deplibs; do
 	    # Check to see that each library is installed.
 	    libdir=
 	    if test -f "$lib"; then
 	      func_source "$lib"
 	    fi

 	    libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test

 	    if test -n "$libdir" && test ! -f "$libfile"; then
 	      func_warning "\`$lib' has not been installed in \`$libdir'"
 	      finalize=no
 	    fi
 	  done
 
 	  relink_command=
 	  func_source "$wrapper"
 
 	  outputname=
 	  if test "$fast_install" = no && test -n "$relink_command"; then
 	    $opt_dry_run || {
 	      if test "$finalize" = yes; then
 	        tmpdir=`func_mktempdir`
 		func_basename "$file$stripped_ext"
 		file="$func_basename_result"
 	        outputname="$tmpdir/$file"
 	        # Replace the output file specification.

 	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`

 
 	        $opt_silent || {
 	          func_quote_for_expand "$relink_command"
 		  eval "func_echo $func_quote_for_expand_result"
 	        }
 	        if eval "$relink_command"; then :
 	          else
 		  func_error "error: relink \`$file' with the above command before installing it"
 		  $opt_dry_run || ${RM}r "$tmpdir"
 		  continue
 	        fi
 	        file="$outputname"
 	      else
 	        func_warning "cannot relink \`$file'"
 	      fi
 	    }
 	  else
 	    # Install the binary that we compiled earlier.

 	    file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`

 	  fi
 	fi
 
 	# remove .exe since cygwin /usr/bin/install will append another
 	# one anyway
 	case $install_prog,$host in
 	*/usr/bin/install*,*cygwin*)
 	  case $file:$destfile in
 	  *.exe:*.exe)
 	    # this is ok
 	    ;;
 	  *.exe:*)
 	    destfile=$destfile.exe
 	    ;;
 	  *:*.exe)
 	    func_stripname '' '.exe' "$destfile"
 	    destfile=$func_stripname_result
 	    ;;
 	  esac
 	  ;;
 	esac
 	func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
 	$opt_dry_run || if test -n "$outputname"; then
 	  ${RM}r "$tmpdir"
 	fi
 	;;
       esac
     done
 
     for file in $staticlibs; do
       func_basename "$file"
       name="$func_basename_result"
 
       # Set up the ranlib parameters.
       oldlib="$destdir/$name"

       func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
       tool_oldlib=$func_to_tool_file_result

 
       func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
 
       if test -n "$stripme" && test -n "$old_striplib"; then

 	func_show_eval "$old_striplib $tool_oldlib" 'exit $?'

       fi
 
       # Do each command in the postinstall commands.
       func_execute_cmds "$old_postinstall_cmds" 'exit $?'
     done
 
     test -n "$future_libdirs" && \
       func_warning "remember to run \`$progname --finish$future_libdirs'"
 
     if test -n "$current_libdirs"; then
       # Maybe just do a dry run.
       $opt_dry_run && current_libdirs=" -n$current_libdirs"
       exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
     else
       exit $EXIT_SUCCESS
     fi
 }
 

 test "$opt_mode" = install && func_mode_install ${1+"$@"}

 
 
 # func_generate_dlsyms outputname originator pic_p
 # Extract symbols from dlprefiles and create ${outputname}S.o with
 # a dlpreopen symbol table.
 func_generate_dlsyms ()
 {
     $opt_debug
     my_outputname="$1"
     my_originator="$2"
     my_pic_p="${3-no}"
     my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
     my_dlsyms=
 
     if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
       if test -n "$NM" && test -n "$global_symbol_pipe"; then
 	my_dlsyms="${my_outputname}S.c"
       else
 	func_error "not configured to extract global symbols from dlpreopened files"
       fi
     fi
 
     if test -n "$my_dlsyms"; then
       case $my_dlsyms in
       "") ;;
       *.c)
 	# Discover the nlist of each of the dlfiles.
 	nlist="$output_objdir/${my_outputname}.nm"
 
 	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
 
 	# Parse the name list into a source file.
 	func_verbose "creating $output_objdir/$my_dlsyms"
 
 	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
 /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
 /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
 
 #ifdef __cplusplus
 extern \"C\" {
 #endif
 

 #if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
 #pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
 #endif
 
 /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
 #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
 /* DATA imports from DLLs on WIN32 con't be const, because runtime
    relocations are performed -- see ld's documentation on pseudo-relocs.  */
 # define LT_DLSYM_CONST
 #elif defined(__osf__)
 /* This system does not cope well with relocations in const data.  */
 # define LT_DLSYM_CONST
 #else
 # define LT_DLSYM_CONST const
 #endif
 

 /* External symbol declarations for the compiler. */\
 "
 
 	if test "$dlself" = yes; then
 	  func_verbose "generating symbol list for \`$output'"
 
 	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
 
 	  # Add our own program objects to the symbol list.

 	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`

 	  for progfile in $progfiles; do

 	    func_to_tool_file "$progfile" func_convert_file_msys_to_w32
 	    func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
 	    $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"

 	  done
 
 	  if test -n "$exclude_expsyms"; then
 	    $opt_dry_run || {
 	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
 	      eval '$MV "$nlist"T "$nlist"'
 	    }
 	  fi
 
 	  if test -n "$export_symbols_regex"; then
 	    $opt_dry_run || {
 	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
 	      eval '$MV "$nlist"T "$nlist"'
 	    }
 	  fi
 
 	  # Prepare the list of exported symbols
 	  if test -z "$export_symbols"; then
 	    export_symbols="$output_objdir/$outputname.exp"
 	    $opt_dry_run || {
 	      $RM $export_symbols
 	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
 	      case $host in
 	      *cygwin* | *mingw* | *cegcc* )
                 eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
                 eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
 	        ;;
 	      esac
 	    }
 	  else
 	    $opt_dry_run || {
 	      eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
 	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
 	      eval '$MV "$nlist"T "$nlist"'
 	      case $host in

 	        *cygwin* | *mingw* | *cegcc* )

 	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
 	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
 	          ;;
 	      esac
 	    }
 	  fi
 	fi
 
 	for dlprefile in $dlprefiles; do
 	  func_verbose "extracting global C symbols from \`$dlprefile'"
 	  func_basename "$dlprefile"
 	  name="$func_basename_result"

           case $host in
 	    *cygwin* | *mingw* | *cegcc* )
 	      # if an import library, we need to obtain dlname
 	      if func_win32_import_lib_p "$dlprefile"; then
 	        func_tr_sh "$dlprefile"
 	        eval "curr_lafile=\$libfile_$func_tr_sh_result"
 	        dlprefile_dlbasename=""
 	        if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
 	          # Use subshell, to avoid clobbering current variable values
 	          dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
 	          if test -n "$dlprefile_dlname" ; then
 	            func_basename "$dlprefile_dlname"
 	            dlprefile_dlbasename="$func_basename_result"
 	          else
 	            # no lafile. user explicitly requested -dlpreopen <import library>.
 	            $sharedlib_from_linklib_cmd "$dlprefile"
 	            dlprefile_dlbasename=$sharedlib_from_linklib_result
 	          fi
 	        fi
 	        $opt_dry_run || {
 	          if test -n "$dlprefile_dlbasename" ; then
 	            eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
 	          else
 	            func_warning "Could not compute DLL name from $name"
 	            eval '$ECHO ": $name " >> "$nlist"'
 	          fi
 	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
 	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
 	            $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
 	        }
 	      else # not an import lib
 	        $opt_dry_run || {
 	          eval '$ECHO ": $name " >> "$nlist"'
 	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
 	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
 	        }
 	      fi
 	    ;;
 	    *)
 	      $opt_dry_run || {
 	        eval '$ECHO ": $name " >> "$nlist"'
 	        func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
 	        eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
 	      }
 	    ;;
           esac

 	done
 
 	$opt_dry_run || {
 	  # Make sure we have at least an empty file.
 	  test -f "$nlist" || : > "$nlist"
 
 	  if test -n "$exclude_expsyms"; then
 	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
 	    $MV "$nlist"T "$nlist"
 	  fi
 
 	  # Try sorting and uniquifying the output.
 	  if $GREP -v "^: " < "$nlist" |
 	      if sort -k 3 </dev/null >/dev/null 2>&1; then
 		sort -k 3
 	      else
 		sort +2
 	      fi |
 	      uniq > "$nlist"S; then
 	    :
 	  else
 	    $GREP -v "^: " < "$nlist" > "$nlist"S
 	  fi
 
 	  if test -f "$nlist"S; then
 	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
 	  else

 	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"

 	  fi
 

 	  echo >> "$output_objdir/$my_dlsyms" "\

 
 /* The mapping between symbol names and symbols.  */
 typedef struct {
   const char *name;
   void *address;
 } lt_dlsymlist;

 extern LT_DLSYM_CONST lt_dlsymlist

 lt_${my_prefix}_LTX_preloaded_symbols[];

 LT_DLSYM_CONST lt_dlsymlist

 lt_${my_prefix}_LTX_preloaded_symbols[] =
 {\
   { \"$my_originator\", (void *) 0 },"
 
 	  case $need_lib_prefix in
 	  no)
 	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
 	    ;;
 	  *)
 	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
 	    ;;
 	  esac

 	  echo >> "$output_objdir/$my_dlsyms" "\

   {0, (void *) 0}
 };
 
 /* This works around a problem in FreeBSD linker */
 #ifdef FREEBSD_WORKAROUND
 static const void *lt_preloaded_setup() {
   return lt_${my_prefix}_LTX_preloaded_symbols;
 }
 #endif
 
 #ifdef __cplusplus
 }
 #endif\
 "
 	} # !$opt_dry_run
 
 	pic_flag_for_symtable=
 	case "$compile_command " in
 	*" -static "*) ;;
 	*)
 	  case $host in
 	  # compiling the symbol table file with pic_flag works around
 	  # a FreeBSD bug that causes programs to crash when -lm is
 	  # linked before any other PIC object.  But we must not use
 	  # pic_flag when linking with -static.  The problem exists in
 	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.

 	  *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)

 	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
 	  *-*-hpux*)
 	    pic_flag_for_symtable=" $pic_flag"  ;;
 	  *)
 	    if test "X$my_pic_p" != Xno; then
 	      pic_flag_for_symtable=" $pic_flag"
 	    fi
 	    ;;
 	  esac
 	  ;;
 	esac
 	symtab_cflags=
 	for arg in $LTCFLAGS; do
 	  case $arg in
 	  -pie | -fpie | -fPIE) ;;

 	  *) func_append symtab_cflags " $arg" ;;

 	  esac
 	done
 
 	# Now compile the dynamic symbol file.
 	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
 
 	# Clean up the generated files.
 	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
 
 	# Transform the symbol file into the correct name.
 	symfileobj="$output_objdir/${my_outputname}S.$objext"
 	case $host in
 	*cygwin* | *mingw* | *cegcc* )
 	  if test -f "$output_objdir/$my_outputname.def"; then

 	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
 	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`

 	  else

 	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
 	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`

 	  fi
 	  ;;
 	*)

 	  compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
 	  finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`

 	  ;;
 	esac
 	;;
       *)
 	func_fatal_error "unknown suffix for \`$my_dlsyms'"
 	;;
       esac
     else
       # We keep going just in case the user didn't refer to
       # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
       # really was required.
 
       # Nullify the symbol file.

       compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
       finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`

     fi
 }
 
 # func_win32_libid arg
 # return the library type of file 'arg'
 #
 # Need a lot of goo to handle *both* DLLs and import libs
 # Has to be a shell function in order to 'eat' the argument
 # that is supplied when $file_magic_command is called.

 # Despite the name, also deal with 64 bit binaries.

 func_win32_libid ()
 {
   $opt_debug
   win32_libid_type="unknown"
   win32_fileres=`file -L $1 2>/dev/null`
   case $win32_fileres in
   *ar\ archive\ import\ library*) # definitely import
     win32_libid_type="x86 archive import"
     ;;
   *ar\ archive*) # could be an import, or static

     # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.

     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |

        $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
       func_to_tool_file "$1" func_convert_file_msys_to_w32
       win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |

 	$SED -n -e '
 	    1,100{
 		/ I /{
 		    s,.*,import,
 		    p
 		    q
 		}
 	    }'`
       case $win32_nmres in
       import*)  win32_libid_type="x86 archive import";;
       *)        win32_libid_type="x86 archive static";;
       esac
     fi

     ;;

   *DLL*)
     win32_libid_type="x86 DLL"
     ;;
   *executable*) # but shell scripts are "executable" too...
     case $win32_fileres in
     *MS\ Windows\ PE\ Intel*)
       win32_libid_type="x86 DLL"
       ;;
     esac
     ;;
   esac
   $ECHO "$win32_libid_type"
 }
 

 # func_cygming_dll_for_implib ARG
 #
 # Platform-specific function to extract the
 # name of the DLL associated with the specified
 # import library ARG.
 # Invoked by eval'ing the libtool variable
 #    $sharedlib_from_linklib_cmd
 # Result is available in the variable
 #    $sharedlib_from_linklib_result
 func_cygming_dll_for_implib ()
 {
   $opt_debug
   sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
 }
 
 # func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
 #
 # The is the core of a fallback implementation of a
 # platform-specific function to extract the name of the
 # DLL associated with the specified import library LIBNAME.
 #
 # SECTION_NAME is either .idata$6 or .idata$7, depending
 # on the platform and compiler that created the implib.
 #
 # Echos the name of the DLL associated with the
 # specified import library.
 func_cygming_dll_for_implib_fallback_core ()
 {
   $opt_debug
   match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
   $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
     $SED '/^Contents of section '"$match_literal"':/{
       # Place marker at beginning of archive member dllname section
       s/.*/====MARK====/
       p
       d
     }
     # These lines can sometimes be longer than 43 characters, but
     # are always uninteresting
     /:[	 ]*file format pe[i]\{,1\}-/d
     /^In archive [^:]*:/d
     # Ensure marker is printed
     /^====MARK====/p
     # Remove all lines with less than 43 characters
     /^.\{43\}/!d
     # From remaining lines, remove first 43 characters
     s/^.\{43\}//' |
     $SED -n '
       # Join marker and all lines until next marker into a single line
       /^====MARK====/ b para
       H
       $ b para
       b
       :para
       x
       s/\n//g
       # Remove the marker
       s/^====MARK====//
       # Remove trailing dots and whitespace
       s/[\. \t]*$//
       # Print
       /./p' |
     # we now have a list, one entry per line, of the stringified
     # contents of the appropriate section of all members of the
     # archive which possess that section. Heuristic: eliminate
     # all those which have a first or second character that is
     # a '.' (that is, objdump's representation of an unprintable
     # character.) This should work for all archives with less than
     # 0x302f exports -- but will fail for DLLs whose name actually
     # begins with a literal '.' or a single character followed by
     # a '.'.
     #
     # Of those that remain, print the first one.
     $SED -e '/^\./d;/^.\./d;q'
 }
 
 # func_cygming_gnu_implib_p ARG
 # This predicate returns with zero status (TRUE) if
 # ARG is a GNU/binutils-style import library. Returns
 # with nonzero status (FALSE) otherwise.
 func_cygming_gnu_implib_p ()
 {
   $opt_debug
   func_to_tool_file "$1" func_convert_file_msys_to_w32
   func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
   test -n "$func_cygming_gnu_implib_tmp"
 }
 
 # func_cygming_ms_implib_p ARG
 # This predicate returns with zero status (TRUE) if
 # ARG is an MS-style import library. Returns
 # with nonzero status (FALSE) otherwise.
 func_cygming_ms_implib_p ()
 {
   $opt_debug
   func_to_tool_file "$1" func_convert_file_msys_to_w32
   func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
   test -n "$func_cygming_ms_implib_tmp"
 }
 
 # func_cygming_dll_for_implib_fallback ARG
 # Platform-specific function to extract the
 # name of the DLL associated with the specified
 # import library ARG.
 #
 # This fallback implementation is for use when $DLLTOOL
 # does not support the --identify-strict option.
 # Invoked by eval'ing the libtool variable
 #    $sharedlib_from_linklib_cmd
 # Result is available in the variable
 #    $sharedlib_from_linklib_result
 func_cygming_dll_for_implib_fallback ()
 {
   $opt_debug
   if func_cygming_gnu_implib_p "$1" ; then
     # binutils import library
     sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
   elif func_cygming_ms_implib_p "$1" ; then
     # ms-generated import library
     sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
   else
     # unknown
     sharedlib_from_linklib_result=""
   fi
 }

 
 
 # func_extract_an_archive dir oldlib
 func_extract_an_archive ()
 {
     $opt_debug
     f_ex_an_ar_dir="$1"; shift
     f_ex_an_ar_oldlib="$1"

     if test "$lock_old_archive_extraction" = yes; then
       lockfile=$f_ex_an_ar_oldlib.lock
       until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
 	func_echo "Waiting for $lockfile to be removed"
 	sleep 2
       done
     fi
     func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
 		   'stat=$?; rm -f "$lockfile"; exit $stat'
     if test "$lock_old_archive_extraction" = yes; then
       $opt_dry_run || rm -f "$lockfile"
     fi

     if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
      :
     else
       func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
     fi
 }
 
 
 # func_extract_archives gentop oldlib ...
 func_extract_archives ()
 {
     $opt_debug
     my_gentop="$1"; shift
     my_oldlibs=${1+"$@"}
     my_oldobjs=""
     my_xlib=""
     my_xabs=""
     my_xdir=""
 
     for my_xlib in $my_oldlibs; do
       # Extract the objects.
       case $my_xlib in
 	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
 	*) my_xabs=`pwd`"/$my_xlib" ;;
       esac
       func_basename "$my_xlib"
       my_xlib="$func_basename_result"
       my_xlib_u=$my_xlib
       while :; do
         case " $extracted_archives " in
 	*" $my_xlib_u "*)
 	  func_arith $extracted_serial + 1
 	  extracted_serial=$func_arith_result
 	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
 	*) break ;;
 	esac
       done
       extracted_archives="$extracted_archives $my_xlib_u"
       my_xdir="$my_gentop/$my_xlib_u"
 
       func_mkdir_p "$my_xdir"
 
       case $host in
       *-darwin*)
 	func_verbose "Extracting $my_xabs"
 	# Do not bother doing anything if just a dry run
 	$opt_dry_run || {
 	  darwin_orig_dir=`pwd`
 	  cd $my_xdir || exit $?
 	  darwin_archive=$my_xabs
 	  darwin_curdir=`pwd`
 	  darwin_base_archive=`basename "$darwin_archive"`
 	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
 	  if test -n "$darwin_arches"; then
 	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
 	    darwin_arch=
 	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
 	    for darwin_arch in  $darwin_arches ; do
 	      func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
 	      $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
 	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
 	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
 	      cd "$darwin_curdir"
 	      $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
 	    done # $darwin_arches
             ## Okay now we've a bunch of thin objects, gotta fatten them up :)
 	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
 	    darwin_file=
 	    darwin_files=
 	    for darwin_file in $darwin_filelist; do

 	      darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`

 	      $LIPO -create -output "$darwin_file" $darwin_files
 	    done # $darwin_filelist
 	    $RM -rf unfat-$$
 	    cd "$darwin_orig_dir"
 	  else
 	    cd $darwin_orig_dir
 	    func_extract_an_archive "$my_xdir" "$my_xabs"
 	  fi # $darwin_arches
 	} # !$opt_dry_run
 	;;
       *)
         func_extract_an_archive "$my_xdir" "$my_xabs"
 	;;
       esac

       my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`

     done
 
     func_extract_archives_result="$my_oldobjs"
 }
 
 

 # func_emit_wrapper [arg=no]

 #

 # Emit a libtool wrapper script on stdout.
 # Don't directly open a file because we may want to
 # incorporate the script contents within a cygwin/mingw
 # wrapper executable.  Must ONLY be called from within
 # func_mode_link because it depends on a number of variables
 # set therein.
 #
 # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
 # variable will take.  If 'yes', then the emitted script
 # will assume that the directory in which it is stored is
 # the $objdir directory.  This is a cygwin/mingw-specific
 # behavior.
 func_emit_wrapper ()

 {

 	func_emit_wrapper_arg1=${1-no}

 
 	$ECHO "\
 #! $SHELL
 
 # $output - temporary wrapper script for $objdir/$outputname
 # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
 #
 # The $output program cannot be directly executed until all the libtool
 # libraries that it depends on are installed.
 #
 # This wrapper script should never be moved out of the build directory.
 # If it is, it will not operate correctly.
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
 sed_quote_subst='$sed_quote_subst'
 
 # Be Bourne compatible
 if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
   # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '\${1+\"\$@\"}'='\"\$@\"'
   setopt NO_GLOB_SUBST
 else
   case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
 fi
 BIN_SH=xpg4; export BIN_SH # for Tru64
 DUALCASE=1; export DUALCASE # for MKS sh
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 relink_command=\"$relink_command\"
 
 # This environment variable determines our operation mode.
 if test \"\$libtool_install_magic\" = \"$magic\"; then
   # install mode needs the following variables:
   generated_by_libtool_version='$macro_version'
   notinst_deplibs='$notinst_deplibs'
 else
   # When we are sourced in execute mode, \$file and \$ECHO are already set.
   if test \"\$libtool_execute_magic\" != \"$magic\"; then

     file=\"\$0\""
 
     qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
     $ECHO "\
 
 # A function that is used when there is no print builtin or printf.
 func_fallback_echo ()
 {
   eval 'cat <<_LTECHO_EOF
 \$1
 _LTECHO_EOF'
 }
     ECHO=\"$qECHO\"
   fi
 
 # Very basic option parsing. These options are (a) specific to
 # the libtool wrapper, (b) are identical between the wrapper
 # /script/ and the wrapper /executable/ which is used only on
 # windows platforms, and (c) all begin with the string "--lt-"
 # (application programs are unlikely to have options which match
 # this pattern).
 #
 # There are only two supported options: --lt-debug and
 # --lt-dump-script. There is, deliberately, no --lt-help.
 #
 # The first argument to this parsing function should be the
 # script's $0 value, followed by "$@".
 lt_option_debug=
 func_parse_lt_options ()
 {
   lt_script_arg0=\$0
   shift
   for lt_opt
   do
     case \"\$lt_opt\" in
     --lt-debug) lt_option_debug=1 ;;
     --lt-dump-script)
         lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
         test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
         lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
         cat \"\$lt_dump_D/\$lt_dump_F\"
         exit 0
       ;;
     --lt-*)
         \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
         exit 1
       ;;
     esac
   done
 
   # Print the debug banner immediately:
   if test -n \"\$lt_option_debug\"; then
     echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
   fi
 }
 
 # Used when --lt-debug. Prints its arguments to stdout
 # (redirection is the responsibility of the caller)
 func_lt_dump_args ()
 {
   lt_dump_args_N=1;
   for lt_arg
   do
     \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
     lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
   done
 }
 
 # Core function for launching the target application
 func_exec_program_core ()
 {

 "

   case $host in
   # Backslashes separate directories on plain windows
   *-*-mingw | *-*-os2* | *-cegcc*)
     $ECHO "\
       if test -n \"\$lt_option_debug\"; then
         \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
         func_lt_dump_args \${1+\"\$@\"} 1>&2
       fi
       exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
 "
     ;;
 
   *)
     $ECHO "\
       if test -n \"\$lt_option_debug\"; then
         \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
         func_lt_dump_args \${1+\"\$@\"} 1>&2
       fi
       exec \"\$progdir/\$program\" \${1+\"\$@\"}
 "
     ;;
   esac
   $ECHO "\
       \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
       exit 1
 }
 
 # A function to encapsulate launching the target application
 # Strips options in the --lt-* namespace from \$@ and
 # launches target application with the remaining arguments.
 func_exec_program ()
 {

   case \" \$* \" in
   *\\ --lt-*)
     for lt_wr_arg
     do
       case \$lt_wr_arg in
       --lt-*) ;;
       *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
       esac
       shift
     done ;;
   esac

   func_exec_program_core \${1+\"\$@\"}
 }
 
   # Parse options
   func_parse_lt_options \"\$0\" \${1+\"\$@\"}

 
   # Find the directory that this script lives in.

   thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`

   test \"x\$thisdir\" = \"x\$file\" && thisdir=.
 
   # Follow symbolic links until we get to the real thisdir.

   file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`

   while test -n \"\$file\"; do

     destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`

 
     # If there was a directory component, then change thisdir.
     if test \"x\$destdir\" != \"x\$file\"; then
       case \"\$destdir\" in
       [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
       *) thisdir=\"\$thisdir/\$destdir\" ;;
       esac
     fi
 

     file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
     file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`

   done
 
   # Usually 'no', except on cygwin/mingw when embedded into
   # the cwrapper.

   WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1

   if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
     # special case for '.'
     if test \"\$thisdir\" = \".\"; then
       thisdir=\`pwd\`
     fi
     # remove .libs from thisdir
     case \"\$thisdir\" in

     *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;

     $objdir )   thisdir=. ;;
     esac
   fi
 
   # Try to get the absolute directory name.
   absdir=\`cd \"\$thisdir\" && pwd\`
   test -n \"\$absdir\" && thisdir=\"\$absdir\"
 "
 
 	if test "$fast_install" = yes; then
 	  $ECHO "\
   program=lt-'$outputname'$exeext
   progdir=\"\$thisdir/$objdir\"
 
   if test ! -f \"\$progdir/\$program\" ||
      { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
        test \"X\$file\" != \"X\$progdir/\$program\"; }; then
 
     file=\"\$\$-\$program\"
 
     if test ! -d \"\$progdir\"; then
       $MKDIR \"\$progdir\"
     else
       $RM \"\$progdir/\$file\"
     fi"
 
 	  $ECHO "\
 
     # relink executable if necessary
     if test -n \"\$relink_command\"; then
       if relink_command_output=\`eval \$relink_command 2>&1\`; then :
       else
 	$ECHO \"\$relink_command_output\" >&2
 	$RM \"\$progdir/\$file\"
 	exit 1
       fi
     fi
 
     $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
     { $RM \"\$progdir/\$program\";
       $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
     $RM \"\$progdir/\$file\"
   fi"
 	else
 	  $ECHO "\
   program='$outputname'
   progdir=\"\$thisdir/$objdir\"
 "
 	fi
 
 	$ECHO "\
 
   if test -f \"\$progdir/\$program\"; then"
 

 	# fixup the dll searchpath if we need to.
 	#
 	# Fix the DLL searchpath if we need to.  Do this before prepending
 	# to shlibpath, because on Windows, both are PATH and uninstalled
 	# libraries must come first.
 	if test -n "$dllsearchpath"; then
 	  $ECHO "\
     # Add the dll search path components to the executable PATH
     PATH=$dllsearchpath:\$PATH
 "
 	fi
 

 	# Export our shlibpath_var if we have one.
 	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
 	  $ECHO "\
     # Add our own library path to $shlibpath_var
     $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
 
     # Some systems cannot cope with colon-terminated $shlibpath_var
     # The second colon is a workaround for a bug in BeOS R4 sed

     $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`

 
     export $shlibpath_var
 "
 	fi
 
 	$ECHO "\
     if test \"\$libtool_execute_magic\" != \"$magic\"; then
       # Run the actual program with our arguments.

       func_exec_program \${1+\"\$@\"}

     fi
   else
     # The program doesn't exist.
     \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
     \$ECHO \"This script is just a wrapper for \$program.\" 1>&2

     \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2

     exit 1
   fi
 fi\
 "
 }
 
 
 # func_emit_cwrapperexe_src
 # emit the source code for a wrapper executable on stdout
 # Must ONLY be called from within func_mode_link because
 # it depends on a number of variable set therein.
 func_emit_cwrapperexe_src ()
 {
 	cat <<EOF
 
 /* $cwrappersource - temporary wrapper executable for $objdir/$outputname
    Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
 
    The $output program cannot be directly executed until all the libtool
    libraries that it depends on are installed.
 
    This wrapper executable should never be moved out of the build directory.
    If it is, it will not operate correctly.
 */
 EOF
 	    cat <<"EOF"

 #ifdef _MSC_VER
 # define _CRT_SECURE_NO_DEPRECATE 1
 #endif

 #include <stdio.h>
 #include <stdlib.h>
 #ifdef _MSC_VER
 # include <direct.h>
 # include <process.h>
 # include <io.h>
 #else
 # include <unistd.h>
 # include <stdint.h>
 # ifdef __CYGWIN__
 #  include <io.h>
 # endif
 #endif
 #include <malloc.h>
 #include <stdarg.h>
 #include <assert.h>
 #include <string.h>
 #include <ctype.h>
 #include <errno.h>
 #include <fcntl.h>
 #include <sys/stat.h>
 

 /* declarations of non-ANSI functions */
 #if defined(__MINGW32__)
 # ifdef __STRICT_ANSI__
 int _putenv (const char *);
 # endif
 #elif defined(__CYGWIN__)
 # ifdef __STRICT_ANSI__
 char *realpath (const char *, char *);
 int putenv (char *);
 int setenv (const char *, const char *, int);
 # endif
 /* #elif defined (other platforms) ... */
 #endif
 
 /* portability defines, excluding path handling macros */
 #if defined(_MSC_VER)
 # define setmode _setmode
 # define stat    _stat
 # define chmod   _chmod
 # define getcwd  _getcwd
 # define putenv  _putenv
 # define S_IXUSR _S_IEXEC
 # ifndef _INTPTR_T_DEFINED
 #  define _INTPTR_T_DEFINED
 #  define intptr_t int
 # endif
 #elif defined(__MINGW32__)
 # define setmode _setmode
 # define stat    _stat
 # define chmod   _chmod
 # define getcwd  _getcwd
 # define putenv  _putenv
 #elif defined(__CYGWIN__)
 # define HAVE_SETENV
 # define FOPEN_WB "wb"
 /* #elif defined (other platforms) ... */
 #endif
 

 #if defined(PATH_MAX)
 # define LT_PATHMAX PATH_MAX
 #elif defined(MAXPATHLEN)
 # define LT_PATHMAX MAXPATHLEN
 #else
 # define LT_PATHMAX 1024
 #endif
 
 #ifndef S_IXOTH
 # define S_IXOTH 0
 #endif
 #ifndef S_IXGRP
 # define S_IXGRP 0
 #endif
 

 /* path handling portability macros */

 #ifndef DIR_SEPARATOR
 # define DIR_SEPARATOR '/'
 # define PATH_SEPARATOR ':'
 #endif
 
 #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
   defined (__OS2__)
 # define HAVE_DOS_BASED_FILE_SYSTEM
 # define FOPEN_WB "wb"
 # ifndef DIR_SEPARATOR_2
 #  define DIR_SEPARATOR_2 '\\'
 # endif
 # ifndef PATH_SEPARATOR_2
 #  define PATH_SEPARATOR_2 ';'
 # endif
 #endif
 
 #ifndef DIR_SEPARATOR_2
 # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
 #else /* DIR_SEPARATOR_2 */
 # define IS_DIR_SEPARATOR(ch) \
 	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
 #endif /* DIR_SEPARATOR_2 */
 
 #ifndef PATH_SEPARATOR_2
 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
 #else /* PATH_SEPARATOR_2 */
 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
 #endif /* PATH_SEPARATOR_2 */
 
 #ifndef FOPEN_WB
 # define FOPEN_WB "w"
 #endif
 #ifndef _O_BINARY
 # define _O_BINARY 0
 #endif
 
 #define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
 #define XFREE(stale) do { \
   if (stale) { free ((void *) stale); stale = 0; } \
 } while (0)
 

 #if defined(LT_DEBUGWRAPPER)
 static int lt_debug = 1;

 #else

 static int lt_debug = 0;

 #endif
 

 const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */

 
 void *xmalloc (size_t num);
 char *xstrdup (const char *string);
 const char *base_name (const char *name);
 char *find_executable (const char *wrapper);
 char *chase_symlinks (const char *pathspec);
 int make_executable (const char *path);
 int check_executable (const char *path);
 char *strendzap (char *str, const char *pat);

 void lt_debugprintf (const char *file, int line, const char *fmt, ...);
 void lt_fatal (const char *file, int line, const char *message, ...);
 static const char *nonnull (const char *s);
 static const char *nonempty (const char *s);

 void lt_setenv (const char *name, const char *value);
 char *lt_extend_str (const char *orig_value, const char *add, int to_end);
 void lt_update_exe_path (const char *name, const char *value);
 void lt_update_lib_path (const char *name, const char *value);

 char **prepare_spawn (char **argv);
 void lt_dump_script (FILE *f);

 EOF
 
 	    cat <<EOF

 volatile const char * MAGIC_EXE = "$magic_exe";

 const char * LIB_PATH_VARNAME = "$shlibpath_var";
 EOF
 
 	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then

               func_to_host_path "$temp_rpath"

 	      cat <<EOF

 const char * LIB_PATH_VALUE   = "$func_to_host_path_result";

 EOF
 	    else
 	      cat <<"EOF"
 const char * LIB_PATH_VALUE   = "";
 EOF
 	    fi
 
 	    if test -n "$dllsearchpath"; then

               func_to_host_path "$dllsearchpath:"

 	      cat <<EOF
 const char * EXE_PATH_VARNAME = "PATH";

 const char * EXE_PATH_VALUE   = "$func_to_host_path_result";

 EOF
 	    else
 	      cat <<"EOF"
 const char * EXE_PATH_VARNAME = "";
 const char * EXE_PATH_VALUE   = "";
 EOF
 	    fi
 
 	    if test "$fast_install" = yes; then
 	      cat <<EOF
 const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
 EOF
 	    else
 	      cat <<EOF
 const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
 EOF
 	    fi
 
 
 	    cat <<"EOF"
 
 #define LTWRAPPER_OPTION_PREFIX         "--lt-"
 
 static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
 static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";

 static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";

 
 int
 main (int argc, char *argv[])
 {
   char **newargz;
   int  newargc;
   char *tmp_pathspec;
   char *actual_cwrapper_path;
   char *actual_cwrapper_name;
   char *target_name;
   char *lt_argv_zero;
   intptr_t rval = 127;
 
   int i;
 
   program_name = (char *) xstrdup (base_name (argv[0]));

   newargz = XMALLOC (char *, argc + 1);

   /* very simple arg parsing; don't want to rely on getopt
    * also, copy all non cwrapper options to newargz, except
    * argz[0], which is handled differently
    */
   newargc=0;

   for (i = 1; i < argc; i++)
     {
       if (strcmp (argv[i], dumpscript_opt) == 0)
 	{
 EOF
 	    case "$host" in
 	      *mingw* | *cygwin* )
 		# make stdout use "unix" line endings
 		echo "          setmode(1,_O_BINARY);"
 		;;
 	      esac
 
 	    cat <<"EOF"

 	  lt_dump_script (stdout);

 	  return 0;
 	}

       if (strcmp (argv[i], debug_opt) == 0)
 	{
           lt_debug = 1;
           continue;
 	}
       if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
         {
           /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
              namespace, but it is not one of the ones we know about and
              have already dealt with, above (inluding dump-script), then
              report an error. Otherwise, targets might begin to believe
              they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
              namespace. The first time any user complains about this, we'll
              need to make LTWRAPPER_OPTION_PREFIX a configure-time option
              or a configure.ac-settable value.
            */
           lt_fatal (__FILE__, __LINE__,
 		    "unrecognized %s option: '%s'",
                     ltwrapper_option_prefix, argv[i]);
         }
       /* otherwise ... */
       newargz[++newargc] = xstrdup (argv[i]);

     }

   newargz[++newargc] = NULL;
 
 EOF
 	    cat <<EOF
   /* The GNU banner must be the first non-error debug message */
   lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
 EOF
 	    cat <<"EOF"
   lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
   lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);

 
   tmp_pathspec = find_executable (argv[0]);
   if (tmp_pathspec == NULL)

     lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
   lt_debugprintf (__FILE__, __LINE__,
                   "(main) found exe (before symlink chase) at: %s\n",
 		  tmp_pathspec);

 
   actual_cwrapper_path = chase_symlinks (tmp_pathspec);

   lt_debugprintf (__FILE__, __LINE__,
                   "(main) found exe (after symlink chase) at: %s\n",
 		  actual_cwrapper_path);

   XFREE (tmp_pathspec);
 

   actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));

   strendzap (actual_cwrapper_path, actual_cwrapper_name);
 
   /* wrapper name transforms */
   strendzap (actual_cwrapper_name, ".exe");
   tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
   XFREE (actual_cwrapper_name);
   actual_cwrapper_name = tmp_pathspec;
   tmp_pathspec = 0;
 
   /* target_name transforms -- use actual target program name; might have lt- prefix */
   target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
   strendzap (target_name, ".exe");
   tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
   XFREE (target_name);
   target_name = tmp_pathspec;
   tmp_pathspec = 0;
 

   lt_debugprintf (__FILE__, __LINE__,
 		  "(main) libtool target name: %s\n",
 		  target_name);

 EOF
 
 	    cat <<EOF
   newargz[0] =
     XMALLOC (char, (strlen (actual_cwrapper_path) +
 		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
   strcpy (newargz[0], actual_cwrapper_path);
   strcat (newargz[0], "$objdir");
   strcat (newargz[0], "/");
 EOF
 
 	    cat <<"EOF"
   /* stop here, and copy so we don't have to do this twice */
   tmp_pathspec = xstrdup (newargz[0]);
 
   /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
   strcat (newargz[0], actual_cwrapper_name);
 
   /* DO want the lt- prefix here if it exists, so use target_name */
   lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
   XFREE (tmp_pathspec);
   tmp_pathspec = NULL;
 EOF
 
 	    case $host_os in
 	      mingw*)
 	    cat <<"EOF"
   {
     char* p;
     while ((p = strchr (newargz[0], '\\')) != NULL)
       {
 	*p = '/';
       }
     while ((p = strchr (lt_argv_zero, '\\')) != NULL)
       {
 	*p = '/';
       }
   }
 EOF
 	    ;;
 	    esac
 
 	    cat <<"EOF"
   XFREE (target_name);
   XFREE (actual_cwrapper_path);
   XFREE (actual_cwrapper_name);
 
   lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
   lt_setenv ("DUALCASE", "1");  /* for MSK sh */

   /* Update the DLL searchpath.  EXE_PATH_VALUE ($dllsearchpath) must
      be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
      because on Windows, both *_VARNAMEs are PATH but uninstalled
      libraries must come first. */

   lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);

   lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);

   lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
 		  nonnull (lt_argv_zero));

   for (i = 0; i < newargc; i++)
     {

       lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
 		      i, nonnull (newargz[i]));

     }
 
 EOF
 
 	    case $host_os in
 	      mingw*)
 		cat <<"EOF"
   /* execv doesn't actually work on mingw as expected on unix */

   newargz = prepare_spawn (newargz);

   rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
   if (rval == -1)
     {
       /* failed to start process */

       lt_debugprintf (__FILE__, __LINE__,
 		      "(main) failed to launch target \"%s\": %s\n",
 		      lt_argv_zero, nonnull (strerror (errno)));

       return 127;
     }
   return rval;
 EOF
 		;;
 	      *)
 		cat <<"EOF"
   execv (lt_argv_zero, newargz);
   return rval; /* =127, but avoids unused variable warning */
 EOF
 		;;
 	    esac
 
 	    cat <<"EOF"
 }
 
 void *
 xmalloc (size_t num)
 {
   void *p = (void *) malloc (num);
   if (!p)

     lt_fatal (__FILE__, __LINE__, "memory exhausted");

 
   return p;
 }
 
 char *
 xstrdup (const char *string)
 {
   return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
 			  string) : NULL;
 }
 
 const char *
 base_name (const char *name)
 {
   const char *base;
 
 #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
   /* Skip over the disk name in MSDOS pathnames. */
   if (isalpha ((unsigned char) name[0]) && name[1] == ':')
     name += 2;
 #endif
 
   for (base = name; *name; name++)
     if (IS_DIR_SEPARATOR (*name))
       base = name + 1;
   return base;
 }
 
 int
 check_executable (const char *path)
 {
   struct stat st;
 

   lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
                   nonempty (path));

   if ((!path) || (!*path))
     return 0;
 
   if ((stat (path, &st) >= 0)
       && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
     return 1;
   else
     return 0;
 }
 
 int
 make_executable (const char *path)
 {
   int rval = 0;
   struct stat st;
 

   lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
                   nonempty (path));

   if ((!path) || (!*path))
     return 0;
 
   if (stat (path, &st) >= 0)
     {
       rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
     }
   return rval;
 }
 
 /* Searches for the full path of the wrapper.  Returns
    newly allocated full path name if found, NULL otherwise
    Does not chase symlinks, even on platforms that support them.
 */
 char *
 find_executable (const char *wrapper)
 {
   int has_slash = 0;
   const char *p;
   const char *p_next;
   /* static buffer for getcwd */
   char tmp[LT_PATHMAX + 1];
   int tmp_len;
   char *concat_name;
 

   lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
                   nonempty (wrapper));

 
   if ((wrapper == NULL) || (*wrapper == '\0'))
     return NULL;
 
   /* Absolute path? */
 #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
   if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
     {
       concat_name = xstrdup (wrapper);
       if (check_executable (concat_name))
 	return concat_name;
       XFREE (concat_name);
     }
   else
     {
 #endif
       if (IS_DIR_SEPARATOR (wrapper[0]))
 	{
 	  concat_name = xstrdup (wrapper);
 	  if (check_executable (concat_name))
 	    return concat_name;
 	  XFREE (concat_name);
 	}
 #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
     }
 #endif
 
   for (p = wrapper; *p; p++)
     if (*p == '/')
       {
 	has_slash = 1;
 	break;
       }
   if (!has_slash)
     {
       /* no slashes; search PATH */
       const char *path = getenv ("PATH");
       if (path != NULL)
 	{
 	  for (p = path; *p; p = p_next)
 	    {
 	      const char *q;
 	      size_t p_len;
 	      for (q = p; *q; q++)
 		if (IS_PATH_SEPARATOR (*q))
 		  break;
 	      p_len = q - p;
 	      p_next = (*q == '\0' ? q : q + 1);
 	      if (p_len == 0)
 		{
 		  /* empty path: current directory */
 		  if (getcwd (tmp, LT_PATHMAX) == NULL)

 		    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
                               nonnull (strerror (errno)));

 		  tmp_len = strlen (tmp);
 		  concat_name =
 		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
 		  memcpy (concat_name, tmp, tmp_len);
 		  concat_name[tmp_len] = '/';
 		  strcpy (concat_name + tmp_len + 1, wrapper);
 		}
 	      else
 		{
 		  concat_name =
 		    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
 		  memcpy (concat_name, p, p_len);
 		  concat_name[p_len] = '/';
 		  strcpy (concat_name + p_len + 1, wrapper);
 		}
 	      if (check_executable (concat_name))
 		return concat_name;
 	      XFREE (concat_name);
 	    }
 	}
       /* not found in PATH; assume curdir */
     }
   /* Relative path | not found in path: prepend cwd */
   if (getcwd (tmp, LT_PATHMAX) == NULL)

     lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
               nonnull (strerror (errno)));

   tmp_len = strlen (tmp);
   concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
   memcpy (concat_name, tmp, tmp_len);
   concat_name[tmp_len] = '/';
   strcpy (concat_name + tmp_len + 1, wrapper);

   if (check_executable (concat_name))
     return concat_name;
   XFREE (concat_name);
   return NULL;
 }
 
 char *
 chase_symlinks (const char *pathspec)
 {
 #ifndef S_ISLNK
   return xstrdup (pathspec);
 #else
   char buf[LT_PATHMAX];
   struct stat s;
   char *tmp_pathspec = xstrdup (pathspec);
   char *p;
   int has_symlinks = 0;
   while (strlen (tmp_pathspec) && !has_symlinks)
     {

       lt_debugprintf (__FILE__, __LINE__,
 		      "checking path component for symlinks: %s\n",
 		      tmp_pathspec);

       if (lstat (tmp_pathspec, &s) == 0)
 	{
 	  if (S_ISLNK (s.st_mode) != 0)
 	    {
 	      has_symlinks = 1;
 	      break;
 	    }
 
 	  /* search backwards for last DIR_SEPARATOR */
 	  p = tmp_pathspec + strlen (tmp_pathspec) - 1;
 	  while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
 	    p--;
 	  if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
 	    {
 	      /* no more DIR_SEPARATORS left */
 	      break;
 	    }
 	  *p = '\0';
 	}
       else
 	{

 	  lt_fatal (__FILE__, __LINE__,
 		    "error accessing file \"%s\": %s",
 		    tmp_pathspec, nonnull (strerror (errno)));

 	}
     }
   XFREE (tmp_pathspec);
 
   if (!has_symlinks)
     {
       return xstrdup (pathspec);
     }
 
   tmp_pathspec = realpath (pathspec, buf);
   if (tmp_pathspec == 0)
     {

       lt_fatal (__FILE__, __LINE__,
 		"could not follow symlinks for %s", pathspec);

     }
   return xstrdup (tmp_pathspec);
 #endif
 }
 
 char *
 strendzap (char *str, const char *pat)
 {
   size_t len, patlen;
 
   assert (str != NULL);
   assert (pat != NULL);
 
   len = strlen (str);
   patlen = strlen (pat);
 
   if (patlen <= len)
     {
       str += len - patlen;
       if (strcmp (str, pat) == 0)
 	*str = '\0';
     }
   return str;
 }
 

 void
 lt_debugprintf (const char *file, int line, const char *fmt, ...)
 {
   va_list args;
   if (lt_debug)
     {
       (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
       va_start (args, fmt);
       (void) vfprintf (stderr, fmt, args);
       va_end (args);
     }
 }
 

 static void

 lt_error_core (int exit_status, const char *file,
 	       int line, const char *mode,

 	       const char *message, va_list ap)
 {

   fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);

   vfprintf (stderr, message, ap);
   fprintf (stderr, ".\n");
 
   if (exit_status >= 0)
     exit (exit_status);
 }
 
 void

 lt_fatal (const char *file, int line, const char *message, ...)

 {
   va_list ap;
   va_start (ap, message);

   lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);

   va_end (ap);
 }
 

 static const char *
 nonnull (const char *s)
 {
   return s ? s : "(null)";
 }
 
 static const char *
 nonempty (const char *s)
 {
   return (s && !*s) ? "(empty)" : nonnull (s);
 }
 

 void
 lt_setenv (const char *name, const char *value)
 {

   lt_debugprintf (__FILE__, __LINE__,
 		  "(lt_setenv) setting '%s' to '%s'\n",
                   nonnull (name), nonnull (value));

   {
 #ifdef HAVE_SETENV
     /* always make a copy, for consistency with !HAVE_SETENV */
     char *str = xstrdup (value);
     setenv (name, str, 1);
 #else
     int len = strlen (name) + 1 + strlen (value) + 1;
     char *str = XMALLOC (char, len);
     sprintf (str, "%s=%s", name, value);
     if (putenv (str) != EXIT_SUCCESS)
       {
         XFREE (str);
       }
 #endif
   }
 }
 
 char *
 lt_extend_str (const char *orig_value, const char *add, int to_end)
 {
   char *new_value;
   if (orig_value && *orig_value)
     {
       int orig_value_len = strlen (orig_value);
       int add_len = strlen (add);
       new_value = XMALLOC (char, add_len + orig_value_len + 1);
       if (to_end)
         {
           strcpy (new_value, orig_value);
           strcpy (new_value + orig_value_len, add);
         }
       else
         {
           strcpy (new_value, add);
           strcpy (new_value + add_len, orig_value);
         }
     }
   else
     {
       new_value = xstrdup (add);
     }
   return new_value;
 }
 
 void
 lt_update_exe_path (const char *name, const char *value)
 {

   lt_debugprintf (__FILE__, __LINE__,
 		  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
                   nonnull (name), nonnull (value));

 
   if (name && *name && value && *value)
     {
       char *new_value = lt_extend_str (getenv (name), value, 0);
       /* some systems can't cope with a ':'-terminated path #' */
       int len = strlen (new_value);
       while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
         {
           new_value[len-1] = '\0';
         }
       lt_setenv (name, new_value);
       XFREE (new_value);
     }
 }
 
 void
 lt_update_lib_path (const char *name, const char *value)
 {

   lt_debugprintf (__FILE__, __LINE__,
 		  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
                   nonnull (name), nonnull (value));

 
   if (name && *name && value && *value)
     {
       char *new_value = lt_extend_str (getenv (name), value, 0);
       lt_setenv (name, new_value);
       XFREE (new_value);
     }
 }
 

 EOF
 	    case $host_os in
 	      mingw*)
 		cat <<"EOF"
 
 /* Prepares an argument vector before calling spawn().
    Note that spawn() does not by itself call the command interpreter
      (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
       ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
          GetVersionEx(&v);
          v.dwPlatformId == VER_PLATFORM_WIN32_NT;
       }) ? "cmd.exe" : "command.com").
    Instead it simply concatenates the arguments, separated by ' ', and calls
    CreateProcess().  We must quote the arguments since Win32 CreateProcess()
    interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
    special way:
    - Space and tab are interpreted as delimiters. They are not treated as
      delimiters if they are surrounded by double quotes: "...".
    - Unescaped double quotes are removed from the input. Their only effect is
      that within double quotes, space and tab are treated like normal
      characters.
    - Backslashes not followed by double quotes are not special.
    - But 2*n+1 backslashes followed by a double quote become
      n backslashes followed by a double quote (n >= 0):
        \" -> "
        \\\" -> \"
        \\\\\" -> \\"
  */
 #define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
 #define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
 char **
 prepare_spawn (char **argv)
 {
   size_t argc;
   char **new_argv;
   size_t i;
 
   /* Count number of arguments.  */
   for (argc = 0; argv[argc] != NULL; argc++)
     ;
 
   /* Allocate new argument vector.  */
   new_argv = XMALLOC (char *, argc + 1);
 
   /* Put quoted arguments into the new argument vector.  */
   for (i = 0; i < argc; i++)
     {
       const char *string = argv[i];
 
       if (string[0] == '\0')
 	new_argv[i] = xstrdup ("\"\"");
       else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
 	{
 	  int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
 	  size_t length;
 	  unsigned int backslashes;
 	  const char *s;
 	  char *quoted_string;
 	  char *p;
 
 	  length = 0;
 	  backslashes = 0;
 	  if (quote_around)
 	    length++;
 	  for (s = string; *s != '\0'; s++)
 	    {
 	      char c = *s;
 	      if (c == '"')
 		length += backslashes + 1;
 	      length++;
 	      if (c == '\\')
 		backslashes++;
 	      else
 		backslashes = 0;
 	    }
 	  if (quote_around)
 	    length += backslashes + 1;

 	  quoted_string = XMALLOC (char, length + 1);
 
 	  p = quoted_string;
 	  backslashes = 0;
 	  if (quote_around)
 	    *p++ = '"';
 	  for (s = string; *s != '\0'; s++)
 	    {
 	      char c = *s;
 	      if (c == '"')
 		{
 		  unsigned int j;
 		  for (j = backslashes + 1; j > 0; j--)
 		    *p++ = '\\';
 		}
 	      *p++ = c;
 	      if (c == '\\')
 		backslashes++;
 	      else
 		backslashes = 0;
 	    }
 	  if (quote_around)
 	    {
 	      unsigned int j;
 	      for (j = backslashes; j > 0; j--)
 		*p++ = '\\';
 	      *p++ = '"';
 	    }
 	  *p = '\0';
 
 	  new_argv[i] = quoted_string;
 	}
       else
 	new_argv[i] = (char *) string;
     }
   new_argv[argc] = NULL;
 
   return new_argv;
 }
 EOF
 		;;
 	    esac
 
             cat <<"EOF"
 void lt_dump_script (FILE* f)
 {
 EOF
 	    func_emit_wrapper yes |

 	      $SED -n -e '
 s/^\(.\{79\}\)\(..*\)/\1\
 \2/
 h
 s/\([\\"]\)/\\\1/g
 s/$/\\n/
 s/\([^\n]*\).*/  fputs ("\1", f);/p
 g
 D'

             cat <<"EOF"
 }

 EOF
 }
 # end: func_emit_cwrapperexe_src
 

 # func_win32_import_lib_p ARG
 # True if ARG is an import lib, as indicated by $file_magic_cmd
 func_win32_import_lib_p ()
 {
     $opt_debug
     case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
     *import*) : ;;
     *) false ;;
     esac
 }
 

 # func_mode_link arg...
 func_mode_link ()
 {
     $opt_debug

     case $host in

     *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)

       # It is impossible to link a dll without this setting, and
       # we shouldn't force the makefile maintainer to figure out
       # which system we are compiling for in order to pass an extra
       # flag for every libtool invocation.
       # allow_undefined=no
 
       # FIXME: Unfortunately, there are problems with the above when trying
       # to make a dll which has undefined symbols, in which case not
       # even a static library is built.  For now, we need to specify
       # -no-undefined on the libtool link line when we can be certain
       # that all symbols are satisfied, otherwise we get a static library.
       allow_undefined=yes
       ;;
     *)
       allow_undefined=yes
       ;;
     esac

     libtool_args=$nonopt

     base_compile="$nonopt $@"

     compile_command=$nonopt
     finalize_command=$nonopt

 
     compile_rpath=
     finalize_rpath=
     compile_shlibpath=
     finalize_shlibpath=
     convenience=
     old_convenience=
     deplibs=
     old_deplibs=
     compiler_flags=
     linker_flags=
     dllsearchpath=
     lib_search_path=`pwd`
     inst_prefix_dir=

     new_inherited_linker_flags=

 
     avoid_version=no

     bindir=

     dlfiles=
     dlprefiles=
     dlself=no
     export_dynamic=no
     export_symbols=
     export_symbols_regex=
     generated=
     libobjs=
     ltlibs=
     module=no
     no_install=no
     objs=
     non_pic_objects=
     precious_files_regex=
     prefer_static_libs=no
     preload=no
     prev=
     prevarg=
     release=
     rpath=
     xrpath=
     perm_rpath=
     temp_rpath=
     thread_safe=no
     vinfo=
     vinfo_number=no

     weak_libs=

     single_module="${wl}-single_module"

     func_infer_tag $base_compile
 
     # We need to know -static, to get the right output filenames.
     for arg
     do
       case $arg in

       -shared)
 	test "$build_libtool_libs" != yes && \
 	  func_fatal_configuration "can not build a shared library"
 	build_old_libs=no
 	break
 	;;

       -all-static | -static | -static-libtool-libs)
 	case $arg in
 	-all-static)

 	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then

 	    func_warning "complete static linking is impossible in this configuration"

 	  fi
 	  if test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
 	  fi
 	  prefer_static_libs=yes

 	  ;;
 	-static)

 	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
 	  fi
 	  prefer_static_libs=built

 	  ;;
 	-static-libtool-libs)
 	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
 	  fi
 	  prefer_static_libs=yes
 	  ;;
 	esac

 	build_libtool_libs=no
 	build_old_libs=yes
 	break
 	;;
       esac
     done
 
     # See if our shared archives depend on static archives.
     test -n "$old_archive_from_new_cmds" && build_old_libs=yes
 
     # Go through the arguments, transforming them on the way.
     while test "$#" -gt 0; do
       arg="$1"
       shift

       func_quote_for_eval "$arg"
       qarg=$func_quote_for_eval_unquoted_result
       func_append libtool_args " $func_quote_for_eval_result"

 
       # If the previous option needs an argument, assign it.
       if test -n "$prev"; then
 	case $prev in
 	output)

 	  func_append compile_command " @OUTPUT@"
 	  func_append finalize_command " @OUTPUT@"

 	  ;;
 	esac
 
 	case $prev in

 	bindir)
 	  bindir="$arg"
 	  prev=
 	  continue
 	  ;;

 	dlfiles|dlprefiles)
 	  if test "$preload" = no; then
 	    # Add the symbol object into the linking commands.

 	    func_append compile_command " @SYMFILE@"
 	    func_append finalize_command " @SYMFILE@"

 	    preload=yes
 	  fi
 	  case $arg in
 	  *.la | *.lo) ;;  # We handle these cases below.
 	  force)
 	    if test "$dlself" = no; then
 	      dlself=needless
 	      export_dynamic=yes
 	    fi
 	    prev=
 	    continue
 	    ;;
 	  self)
 	    if test "$prev" = dlprefiles; then
 	      dlself=yes
 	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
 	      dlself=yes
 	    else
 	      dlself=needless
 	      export_dynamic=yes
 	    fi
 	    prev=
 	    continue
 	    ;;
 	  *)
 	    if test "$prev" = dlfiles; then

 	      func_append dlfiles " $arg"

 	    else

 	      func_append dlprefiles " $arg"

 	    fi
 	    prev=
 	    continue
 	    ;;
 	  esac
 	  ;;
 	expsyms)
 	  export_symbols="$arg"

 	  test -f "$arg" \
 	    || func_fatal_error "symbol file \`$arg' does not exist"

 	  prev=
 	  continue
 	  ;;
 	expsyms_regex)
 	  export_symbols_regex="$arg"
 	  prev=
 	  continue
 	  ;;

 	framework)
 	  case $host in
 	    *-*-darwin*)
 	      case "$deplibs " in
 		*" $qarg.ltframework "*) ;;

 		*) func_append deplibs " $qarg.ltframework" # this is fixed later

 		   ;;
 	      esac
 	      ;;
 	  esac

 	  prev=
 	  continue
 	  ;;

 	inst_prefix)
 	  inst_prefix_dir="$arg"

 	  prev=
 	  continue
 	  ;;
 	objectlist)
 	  if test -f "$arg"; then
 	    save_arg=$arg
 	    moreargs=

 	    for fil in `cat "$save_arg"`

 	    do

 #	      func_append moreargs " $fil"

 	      arg=$fil
 	      # A libtool-controlled object.
 
 	      # Check to see that this really is a libtool object.

 	      if func_lalib_unsafe_p "$arg"; then

 		pic_object=
 		non_pic_object=
 
 		# Read the .lo file

 		func_source "$arg"

 		if test -z "$pic_object" ||

 		   test -z "$non_pic_object" ||

 		   test "$pic_object" = none &&

 		   test "$non_pic_object" = none; then

 		  func_fatal_error "cannot find name of object for \`$arg'"

 		fi
 
 		# Extract subdirectory from the argument.

 		func_dirname "$arg" "/" ""
 		xdir="$func_dirname_result"

 
 		if test "$pic_object" != none; then
 		  # Prepend the subdirectory the object is found in.
 		  pic_object="$xdir$pic_object"
 
 		  if test "$prev" = dlfiles; then
 		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then

 		      func_append dlfiles " $pic_object"

 		      prev=
 		      continue
 		    else
 		      # If libtool objects are unsupported, then we need to preload.
 		      prev=dlprefiles
 		    fi
 		  fi
 
 		  # CHECK ME:  I think I busted this.  -Ossama
 		  if test "$prev" = dlprefiles; then
 		    # Preload the old-style object.

 		    func_append dlprefiles " $pic_object"

 		    prev=
 		  fi
 
 		  # A PIC object.

 		  func_append libobjs " $pic_object"

 		  arg="$pic_object"
 		fi
 
 		# Non-PIC object.
 		if test "$non_pic_object" != none; then
 		  # Prepend the subdirectory the object is found in.
 		  non_pic_object="$xdir$non_pic_object"
 
 		  # A standard non-PIC object

 		  func_append non_pic_objects " $non_pic_object"

 		  if test -z "$pic_object" || test "$pic_object" = none ; then
 		    arg="$non_pic_object"
 		  fi
 		else
 		  # If the PIC object exists, use it instead.
 		  # $xdir was prepended to $pic_object above.
 		  non_pic_object="$pic_object"

 		  func_append non_pic_objects " $non_pic_object"

 		fi
 	      else
 		# Only an error if not doing a dry-run.

 		if $opt_dry_run; then

 		  # Extract subdirectory from the argument.

 		  func_dirname "$arg" "/" ""
 		  xdir="$func_dirname_result"
 
 		  func_lo2o "$arg"
 		  pic_object=$xdir$objdir/$func_lo2o_result
 		  non_pic_object=$xdir$func_lo2o_result
 		  func_append libobjs " $pic_object"
 		  func_append non_pic_objects " $non_pic_object"
 	        else
 		  func_fatal_error "\`$arg' is not a valid libtool object"

 		fi
 	      fi
 	    done
 	  else

 	    func_fatal_error "link input file \`$arg' does not exist"

 	  fi
 	  arg=$save_arg
 	  prev=
 	  continue
 	  ;;

 	precious_regex)
 	  precious_files_regex="$arg"
 	  prev=
 	  continue
 	  ;;
 	release)
 	  release="-$arg"
 	  prev=
 	  continue
 	  ;;

 	rpath | xrpath)
 	  # We need an absolute path.
 	  case $arg in
 	  [\\/]* | [A-Za-z]:[\\/]*) ;;
 	  *)

 	    func_fatal_error "only absolute run-paths are allowed"

 	    ;;
 	  esac
 	  if test "$prev" = rpath; then
 	    case "$rpath " in
 	    *" $arg "*) ;;

 	    *) func_append rpath " $arg" ;;

 	    esac
 	  else
 	    case "$xrpath " in
 	    *" $arg "*) ;;

 	    *) func_append xrpath " $arg" ;;

 	    esac
 	  fi
 	  prev=
 	  continue
 	  ;;

 	shrext)
 	  shrext_cmds="$arg"

 	  prev=
 	  continue
 	  ;;

 	weak)

 	  func_append weak_libs " $arg"

 	  prev=
 	  continue
 	  ;;
 	xcclinker)

 	  func_append linker_flags " $qarg"
 	  func_append compiler_flags " $qarg"

 	  prev=

 	  func_append compile_command " $qarg"
 	  func_append finalize_command " $qarg"

 	  continue
 	  ;;

 	xcompiler)

 	  func_append compiler_flags " $qarg"

 	  prev=

 	  func_append compile_command " $qarg"
 	  func_append finalize_command " $qarg"

 	  continue
 	  ;;

 	xlinker)

 	  func_append linker_flags " $qarg"
 	  func_append compiler_flags " $wl$qarg"

 	  prev=

 	  func_append compile_command " $wl$qarg"
 	  func_append finalize_command " $wl$qarg"

 	  continue
 	  ;;
 	*)
 	  eval "$prev=\"\$arg\""
 	  prev=
 	  continue
 	  ;;
 	esac
       fi # test -n "$prev"
 
       prevarg="$arg"
 
       case $arg in
       -all-static)
 	if test -n "$link_static_flag"; then

 	  # See comment for -static flag below, for more details.
 	  func_append compile_command " $link_static_flag"
 	  func_append finalize_command " $link_static_flag"

 	fi
 	continue
 	;;
 
       -allow-undefined)
 	# FIXME: remove this flag sometime in the future.

 	func_fatal_error "\`-allow-undefined' must not be used because it is the default"

 	;;
 
       -avoid-version)
 	avoid_version=yes
 	continue
 	;;
 

       -bindir)
 	prev=bindir
 	continue
 	;;
 

       -dlopen)
 	prev=dlfiles
 	continue
 	;;
 
       -dlpreopen)
 	prev=dlprefiles
 	continue
 	;;
 
       -export-dynamic)
 	export_dynamic=yes
 	continue
 	;;
 
       -export-symbols | -export-symbols-regex)
 	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then

 	  func_fatal_error "more than one -exported-symbols argument is not allowed"

 	fi
 	if test "X$arg" = "X-export-symbols"; then
 	  prev=expsyms
 	else
 	  prev=expsyms_regex
 	fi
 	continue
 	;;
 

       -framework)
 	prev=framework

 	continue
 	;;
 
       -inst-prefix-dir)
 	prev=inst_prefix
 	continue
 	;;
 
       # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
       # so, if we see these flags be careful not to treat them like -L
       -L[A-Z][A-Z]*:*)
 	case $with_gcc/$host in
 	no/*-*-irix* | /*-*-irix*)

 	  func_append compile_command " $arg"
 	  func_append finalize_command " $arg"

 	  ;;
 	esac
 	continue
 	;;
 
       -L*)

 	func_stripname "-L" '' "$arg"
 	if test -z "$func_stripname_result"; then

 	  if test "$#" -gt 0; then
 	    func_fatal_error "require no space between \`-L' and \`$1'"
 	  else
 	    func_fatal_error "need path for \`-L' option"
 	  fi
 	fi

 	func_resolve_sysroot "$func_stripname_result"
 	dir=$func_resolve_sysroot_result

 	# We need an absolute path.
 	case $dir in
 	[\\/]* | [A-Za-z]:[\\/]*) ;;
 	*)
 	  absdir=`cd "$dir" && pwd`

 	  test -z "$absdir" && \
 	    func_fatal_error "cannot determine absolute directory name of \`$dir'"

 	  dir="$absdir"
 	  ;;
 	esac
 	case "$deplibs " in

 	*" -L$dir "* | *" $arg "*)
 	  # Will only happen for absolute or sysroot arguments
 	  ;;

 	*)

 	  # Preserve sysroot, but never include relative directories
 	  case $dir in
 	    [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
 	    *) func_append deplibs " -L$dir" ;;
 	  esac
 	  func_append lib_search_path " $dir"

 	  ;;
 	esac
 	case $host in

 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)

 	  testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`

 	  case :$dllsearchpath: in
 	  *":$dir:"*) ;;

 	  ::) dllsearchpath=$dir;;

 	  *) func_append dllsearchpath ":$dir";;

 	  esac
 	  case :$dllsearchpath: in
 	  *":$testbindir:"*) ;;

 	  ::) dllsearchpath=$testbindir;;

 	  *) func_append dllsearchpath ":$testbindir";;

 	  esac
 	  ;;
 	esac
 	continue
 	;;
 
       -l*)
 	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
 	  case $host in

 	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)

 	    # These systems don't actually have a C or math library (as such)
 	    continue
 	    ;;
 	  *-*-os2*)
 	    # These systems don't actually have a C library (as such)
 	    test "X$arg" = "X-lc" && continue
 	    ;;
 	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
 	    # Do not include libc due to us having libc/libc_r.
 	    test "X$arg" = "X-lc" && continue
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.[012])
 	    # Rhapsody C and math libraries are in the System framework

 	    func_append deplibs " System.ltframework"

 	    continue
 	    ;;
 	  *-*-sco3.2v5* | *-*-sco5v6*)
 	    # Causes problems with __ctype
 	    test "X$arg" = "X-lc" && continue
 	    ;;
 	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
 	    # Compiler inserts libc in the correct place for threads to work
 	    test "X$arg" = "X-lc" && continue
 	    ;;
 	  esac
 	elif test "X$arg" = "X-lc_r"; then
 	 case $host in
 	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
 	   # Do not include libc_r directly, use -pthread flag.
 	   continue
 	   ;;
 	 esac
 	fi

 	func_append deplibs " $arg"

 	continue
 	;;
 

       -module)
 	module=yes
 	continue
 	;;
 

       # Tru64 UNIX uses -model [arg] to determine the layout of C++
       # classes, name mangling, and exception handling.

       # Darwin uses the -arch flag to determine output architecture.

       -model|-arch|-isysroot|--sysroot)
 	func_append compiler_flags " $arg"

 	func_append compile_command " $arg"
 	func_append finalize_command " $arg"

 	prev=xcompiler
 	continue
 	;;
 

       -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
       |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)

 	func_append compiler_flags " $arg"

 	func_append compile_command " $arg"
 	func_append finalize_command " $arg"
 	case "$new_inherited_linker_flags " in
 	    *" $arg "*) ;;

 	    * ) func_append new_inherited_linker_flags " $arg" ;;

 	esac

 	continue
 	;;
 

       -multi_module)
 	single_module="${wl}-multi_module"
 	continue
 	;;
 

       -no-fast-install)
 	fast_install=no
 	continue
 	;;
 
       -no-install)
 	case $host in

 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)

 	  # The PATH hackery in wrapper scripts is required on Windows

 	  # and Darwin in order for the loader to find any dlls it needs.

 	  func_warning "\`-no-install' is ignored for $host"
 	  func_warning "assuming \`-no-fast-install' instead"

 	  fast_install=no
 	  ;;
 	*) no_install=yes ;;
 	esac
 	continue
 	;;
 
       -no-undefined)
 	allow_undefined=no
 	continue
 	;;
 
       -objectlist)
 	prev=objectlist
 	continue
 	;;
 
       -o) prev=output ;;
 
       -precious-files-regex)
 	prev=precious_regex
 	continue
 	;;
 
       -release)
 	prev=release
 	continue
 	;;
 
       -rpath)
 	prev=rpath
 	continue
 	;;
 
       -R)
 	prev=xrpath
 	continue
 	;;
 
       -R*)

 	func_stripname '-R' '' "$arg"
 	dir=$func_stripname_result

 	# We need an absolute path.
 	case $dir in
 	[\\/]* | [A-Za-z]:[\\/]*) ;;

 	=*)
 	  func_stripname '=' '' "$dir"
 	  dir=$lt_sysroot$func_stripname_result
 	  ;;

 	*)

 	  func_fatal_error "only absolute run-paths are allowed"

 	  ;;
 	esac
 	case "$xrpath " in
 	*" $dir "*) ;;

 	*) func_append xrpath " $dir" ;;

 	esac
 	continue
 	;;
 

       -shared)
 	# The effects of -shared are defined in a previous loop.
 	continue
 	;;
 
       -shrext)
 	prev=shrext
 	continue
 	;;
 

       -static | -static-libtool-libs)

 	# The effects of -static are defined in a previous loop.
 	# We used to do the same as -all-static on platforms that
 	# didn't have a PIC flag, but the assumption that the effects
 	# would be equivalent was wrong.  It would break on at least
 	# Digital Unix and AIX.
 	continue
 	;;
 
       -thread-safe)
 	thread_safe=yes
 	continue
 	;;
 
       -version-info)
 	prev=vinfo
 	continue
 	;;

       -version-number)
 	prev=vinfo
 	vinfo_number=yes
 	continue
 	;;
 

       -weak)
         prev=weak
 	continue
 	;;
 

       -Wc,*)

 	func_stripname '-Wc,' '' "$arg"
 	args=$func_stripname_result

 	arg=
 	save_ifs="$IFS"; IFS=','
 	for flag in $args; do
 	  IFS="$save_ifs"

           func_quote_for_eval "$flag"

 	  func_append arg " $func_quote_for_eval_result"
 	  func_append compiler_flags " $func_quote_for_eval_result"

 	done
 	IFS="$save_ifs"

 	func_stripname ' ' '' "$arg"
 	arg=$func_stripname_result

 	;;
 
       -Wl,*)

 	func_stripname '-Wl,' '' "$arg"
 	args=$func_stripname_result

 	arg=
 	save_ifs="$IFS"; IFS=','
 	for flag in $args; do
 	  IFS="$save_ifs"

           func_quote_for_eval "$flag"

 	  func_append arg " $wl$func_quote_for_eval_result"
 	  func_append compiler_flags " $wl$func_quote_for_eval_result"
 	  func_append linker_flags " $func_quote_for_eval_result"

 	done
 	IFS="$save_ifs"

 	func_stripname ' ' '' "$arg"
 	arg=$func_stripname_result

 	;;
 
       -Xcompiler)
 	prev=xcompiler
 	continue
 	;;
 
       -Xlinker)
 	prev=xlinker
 	continue
 	;;
 
       -XCClinker)
 	prev=xcclinker
 	continue
 	;;
 

       # -msg_* for osf cc
       -msg_*)
 	func_quote_for_eval "$arg"
 	arg="$func_quote_for_eval_result"
 	;;
 

       # Flags to be passed through unchanged, with rationale:
       # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
       # -r[0-9][0-9]*        specify processor for the SGI compiler
       # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
       # +DA*, +DD*           enable 64-bit mode for the HP compiler
       # -q*                  compiler args for the IBM compiler
       # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
       # -F/path              path to uninstalled frameworks, gcc on darwin
       # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
       # @file                GCC response files
       # -tp=*                Portland pgcc target processor selection
       # --sysroot=*          for sysroot support
       # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization

       -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \

       -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
       -O*|-flto*|-fwhopr*|-fuse-linker-plugin)

         func_quote_for_eval "$arg"
 	arg="$func_quote_for_eval_result"
         func_append compile_command " $arg"
         func_append finalize_command " $arg"

         func_append compiler_flags " $arg"

         continue
         ;;
 

       # Some other compiler flag.
       -* | +*)

         func_quote_for_eval "$arg"
 	arg="$func_quote_for_eval_result"

 	;;
 
       *.$objext)
 	# A standard object.

 	func_append objs " $arg"

 	;;
 
       *.lo)
 	# A libtool-controlled object.
 
 	# Check to see that this really is a libtool object.

 	if func_lalib_unsafe_p "$arg"; then

 	  pic_object=
 	  non_pic_object=
 
 	  # Read the .lo file

 	  func_source "$arg"

 	  if test -z "$pic_object" ||

 	     test -z "$non_pic_object" ||

 	     test "$pic_object" = none &&

 	     test "$non_pic_object" = none; then

 	    func_fatal_error "cannot find name of object for \`$arg'"

 	  fi
 
 	  # Extract subdirectory from the argument.

 	  func_dirname "$arg" "/" ""
 	  xdir="$func_dirname_result"

 
 	  if test "$pic_object" != none; then
 	    # Prepend the subdirectory the object is found in.
 	    pic_object="$xdir$pic_object"
 
 	    if test "$prev" = dlfiles; then
 	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then

 		func_append dlfiles " $pic_object"

 		prev=
 		continue
 	      else
 		# If libtool objects are unsupported, then we need to preload.
 		prev=dlprefiles
 	      fi
 	    fi
 
 	    # CHECK ME:  I think I busted this.  -Ossama
 	    if test "$prev" = dlprefiles; then
 	      # Preload the old-style object.

 	      func_append dlprefiles " $pic_object"

 	      prev=
 	    fi
 
 	    # A PIC object.

 	    func_append libobjs " $pic_object"

 	    arg="$pic_object"
 	  fi
 
 	  # Non-PIC object.
 	  if test "$non_pic_object" != none; then
 	    # Prepend the subdirectory the object is found in.
 	    non_pic_object="$xdir$non_pic_object"
 
 	    # A standard non-PIC object

 	    func_append non_pic_objects " $non_pic_object"

 	    if test -z "$pic_object" || test "$pic_object" = none ; then
 	      arg="$non_pic_object"
 	    fi
 	  else
 	    # If the PIC object exists, use it instead.
 	    # $xdir was prepended to $pic_object above.
 	    non_pic_object="$pic_object"

 	    func_append non_pic_objects " $non_pic_object"

 	  fi
 	else
 	  # Only an error if not doing a dry-run.

 	  if $opt_dry_run; then

 	    # Extract subdirectory from the argument.

 	    func_dirname "$arg" "/" ""
 	    xdir="$func_dirname_result"
 
 	    func_lo2o "$arg"
 	    pic_object=$xdir$objdir/$func_lo2o_result
 	    non_pic_object=$xdir$func_lo2o_result
 	    func_append libobjs " $pic_object"
 	    func_append non_pic_objects " $non_pic_object"
 	  else
 	    func_fatal_error "\`$arg' is not a valid libtool object"

 	  fi
 	fi
 	;;
 
       *.$libext)
 	# An archive.

 	func_append deplibs " $arg"
 	func_append old_deplibs " $arg"

 	continue
 	;;
 
       *.la)
 	# A libtool-controlled library.
 

 	func_resolve_sysroot "$arg"

 	if test "$prev" = dlfiles; then
 	  # This library was specified with -dlopen.

 	  func_append dlfiles " $func_resolve_sysroot_result"

 	  prev=
 	elif test "$prev" = dlprefiles; then
 	  # The library was specified with -dlpreopen.

 	  func_append dlprefiles " $func_resolve_sysroot_result"

 	  prev=
 	else

 	  func_append deplibs " $func_resolve_sysroot_result"

 	fi
 	continue
 	;;
 
       # Some other compiler argument.
       *)
 	# Unknown arguments in both finalize_command and compile_command need
 	# to be aesthetically quoted because they are evaled later.

 	func_quote_for_eval "$arg"
 	arg="$func_quote_for_eval_result"

 	;;
       esac # arg
 
       # Now actually substitute the argument into the commands.
       if test -n "$arg"; then

 	func_append compile_command " $arg"
 	func_append finalize_command " $arg"

       fi
     done # argument parsing loop
 

     test -n "$prev" && \
       func_fatal_help "the \`$prevarg' option requires an argument"

 
     if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
       eval arg=\"$export_dynamic_flag_spec\"

       func_append compile_command " $arg"
       func_append finalize_command " $arg"

     fi
 
     oldlibs=
     # calculate the name of the file, without its directory

     func_basename "$output"
     outputname="$func_basename_result"

     libobjs_save="$libobjs"
 
     if test -n "$shlibpath_var"; then
       # get the directories listed in $shlibpath_var

       eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`

     else
       shlib_search_path=
     fi
     eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
     eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
 

     func_dirname "$output" "/" ""
     output_objdir="$func_dirname_result$objdir"

     func_to_tool_file "$output_objdir/"
     tool_output_objdir=$func_to_tool_file_result

     # Create the object directory.

     func_mkdir_p "$output_objdir"

 
     # Determine the type of output
     case $output in
     "")

       func_fatal_help "you must specify an output file"

       ;;
     *.$libext) linkmode=oldlib ;;
     *.lo | *.$objext) linkmode=obj ;;
     *.la) linkmode=lib ;;
     *) linkmode=prog ;; # Anything else should be a program.
     esac
 
     specialdeplibs=
 
     libs=
     # Find all interdependent deplibs by searching for libraries
     # that are linked more than once (e.g. -la -lb -la)
     for deplib in $deplibs; do

       if $opt_preserve_dup_deps ; then

 	case "$libs " in

 	*" $deplib "*) func_append specialdeplibs " $deplib" ;;

 	esac
       fi

       func_append libs " $deplib"

     done
 
     if test "$linkmode" = lib; then
       libs="$predeps $libs $compiler_lib_search_path $postdeps"
 
       # Compute libraries that are listed more than once in $predeps
       # $postdeps and mark them as special (i.e., whose duplicates are
       # not to be eliminated).
       pre_post_deps=

       if $opt_duplicate_compiler_generated_deps; then

 	for pre_post_dep in $predeps $postdeps; do
 	  case "$pre_post_deps " in

 	  *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;

 	  esac

 	  func_append pre_post_deps " $pre_post_dep"

 	done
       fi
       pre_post_deps=
     fi
 
     deplibs=
     newdependency_libs=
     newlib_search_path=
     need_relink=no # whether we're linking any uninstalled libtool libraries
     notinst_deplibs= # not-installed libtool libraries

     notinst_path= # paths that contain not-installed libtool libraries
 

     case $linkmode in
     lib)

 	passes="conv dlpreopen link"

 	for file in $dlfiles $dlprefiles; do
 	  case $file in
 	  *.la) ;;
 	  *)

 	    func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"

 	    ;;
 	  esac
 	done
 	;;
     prog)
 	compile_deplibs=
 	finalize_deplibs=
 	alldeplibs=no
 	newdlfiles=
 	newdlprefiles=
 	passes="conv scan dlopen dlpreopen link"
 	;;
     *)  passes="conv"
 	;;
     esac

     for pass in $passes; do

       # The preopen pass in lib mode reverses $deplibs; put it back here
       # so that -L comes before libs that need it for instance...
       if test "$linkmode,$pass" = "lib,link"; then
 	## FIXME: Find the place where the list is rebuilt in the wrong
 	##        order, and fix it there properly
         tmp_deplibs=
 	for deplib in $deplibs; do
 	  tmp_deplibs="$deplib $tmp_deplibs"
 	done
 	deplibs="$tmp_deplibs"
       fi
 

       if test "$linkmode,$pass" = "lib,link" ||
 	 test "$linkmode,$pass" = "prog,scan"; then
 	libs="$deplibs"
 	deplibs=
       fi
       if test "$linkmode" = prog; then
 	case $pass in
 	dlopen) libs="$dlfiles" ;;
 	dlpreopen) libs="$dlprefiles" ;;

 	link)
 	  libs="$deplibs %DEPLIBS%"
 	  test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
 	  ;;

 	esac
       fi

       if test "$linkmode,$pass" = "lib,dlpreopen"; then
 	# Collect and forward deplibs of preopened libtool libs
 	for lib in $dlprefiles; do
 	  # Ignore non-libtool-libs
 	  dependency_libs=

 	  func_resolve_sysroot "$lib"

 	  case $lib in

 	  *.la)	func_source "$func_resolve_sysroot_result" ;;

 	  esac
 
 	  # Collect preopened libtool deplibs, except any this library
 	  # has declared as weak libs
 	  for deplib in $dependency_libs; do

 	    func_basename "$deplib"
             deplib_base=$func_basename_result

 	    case " $weak_libs " in
 	    *" $deplib_base "*) ;;

 	    *) func_append deplibs " $deplib" ;;

 	    esac
 	  done
 	done
 	libs="$dlprefiles"
       fi

       if test "$pass" = dlopen; then
 	# Collect dlpreopened libraries
 	save_deplibs="$deplibs"
 	deplibs=
       fi

       for deplib in $libs; do
 	lib=
 	found=no
 	case $deplib in

 	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
         |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)

 	  if test "$linkmode,$pass" = "prog,link"; then
 	    compile_deplibs="$deplib $compile_deplibs"
 	    finalize_deplibs="$deplib $finalize_deplibs"
 	  else

 	    func_append compiler_flags " $deplib"

 	    if test "$linkmode" = lib ; then
 		case "$new_inherited_linker_flags " in
 		    *" $deplib "*) ;;
 		    * ) func_append new_inherited_linker_flags " $deplib" ;;
 		esac

 	    fi

 	  fi

 	  continue
 	  ;;
 	-l*)
 	  if test "$linkmode" != lib && test "$linkmode" != prog; then

 	    func_warning "\`-l' is ignored for archives/objects"

 	    continue
 	  fi

 	  func_stripname '-l' '' "$deplib"
 	  name=$func_stripname_result

 	  if test "$linkmode" = lib; then
 	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
 	  else
 	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
 	  fi
 	  for searchdir in $searchdirs; do

 	    for search_ext in .la $std_shrext .so .a; do
 	      # Search the libtool library
 	      lib="$searchdir/lib${name}${search_ext}"
 	      if test -f "$lib"; then
 		if test "$search_ext" = ".la"; then
 		  found=yes
 		else
 		  found=no
 		fi
 		break 2
 	      fi
 	    done
 	  done
 	  if test "$found" != yes; then
 	    # deplib doesn't seem to be a libtool library
 	    if test "$linkmode,$pass" = "prog,link"; then
 	      compile_deplibs="$deplib $compile_deplibs"
 	      finalize_deplibs="$deplib $finalize_deplibs"
 	    else
 	      deplibs="$deplib $deplibs"
 	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
 	    fi
 	    continue
 	  else # deplib is a libtool library
 	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
 	    # We need to do some special things here, and not later.
 	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 	      case " $predeps $postdeps " in
 	      *" $deplib "*)

 		if func_lalib_p "$lib"; then

 		  library_names=
 		  old_library=

 		  func_source "$lib"

 		  for l in $old_library $library_names; do
 		    ll="$l"
 		  done
 		  if test "X$ll" = "X$old_library" ; then # only static version available
 		    found=no

 		    func_dirname "$lib" "" "."
 		    ladir="$func_dirname_result"

 		    lib=$ladir/$old_library
 		    if test "$linkmode,$pass" = "prog,link"; then
 		      compile_deplibs="$deplib $compile_deplibs"
 		      finalize_deplibs="$deplib $finalize_deplibs"
 		    else
 		      deplibs="$deplib $deplibs"
 		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
 		    fi
 		    continue
 		  fi
 		fi

 		;;

 	      *) ;;
 	      esac
 	    fi
 	  fi
 	  ;; # -l

 	*.ltframework)
 	  if test "$linkmode,$pass" = "prog,link"; then
 	    compile_deplibs="$deplib $compile_deplibs"
 	    finalize_deplibs="$deplib $finalize_deplibs"
 	  else
 	    deplibs="$deplib $deplibs"
 	    if test "$linkmode" = lib ; then
 		case "$new_inherited_linker_flags " in
 		    *" $deplib "*) ;;

 		    * ) func_append new_inherited_linker_flags " $deplib" ;;

 		esac
 	    fi
 	  fi
 	  continue
 	  ;;

 	-L*)
 	  case $linkmode in
 	  lib)
 	    deplibs="$deplib $deplibs"
 	    test "$pass" = conv && continue
 	    newdependency_libs="$deplib $newdependency_libs"

 	    func_stripname '-L' '' "$deplib"

 	    func_resolve_sysroot "$func_stripname_result"
 	    func_append newlib_search_path " $func_resolve_sysroot_result"

 	    ;;
 	  prog)
 	    if test "$pass" = conv; then
 	      deplibs="$deplib $deplibs"
 	      continue
 	    fi
 	    if test "$pass" = scan; then
 	      deplibs="$deplib $deplibs"
 	    else
 	      compile_deplibs="$deplib $compile_deplibs"
 	      finalize_deplibs="$deplib $finalize_deplibs"
 	    fi

 	    func_stripname '-L' '' "$deplib"

 	    func_resolve_sysroot "$func_stripname_result"
 	    func_append newlib_search_path " $func_resolve_sysroot_result"

 	    ;;
 	  *)

 	    func_warning "\`-L' is ignored for archives/objects"

 	    ;;
 	  esac # linkmode
 	  continue
 	  ;; # -L
 	-R*)
 	  if test "$pass" = link; then

 	    func_stripname '-R' '' "$deplib"

 	    func_resolve_sysroot "$func_stripname_result"
 	    dir=$func_resolve_sysroot_result

 	    # Make sure the xrpath contains only unique directories.
 	    case "$xrpath " in
 	    *" $dir "*) ;;

 	    *) func_append xrpath " $dir" ;;

 	    esac
 	  fi
 	  deplibs="$deplib $deplibs"
 	  continue
 	  ;;

 	*.la)
 	  func_resolve_sysroot "$deplib"
 	  lib=$func_resolve_sysroot_result
 	  ;;

 	*.$libext)
 	  if test "$pass" = conv; then
 	    deplibs="$deplib $deplibs"
 	    continue
 	  fi
 	  case $linkmode in
 	  lib)

 	    # Linking convenience modules into shared libraries is allowed,
 	    # but linking other static libraries is non-portable.
 	    case " $dlpreconveniencelibs " in
 	    *" $deplib "*) ;;
 	    *)
 	      valid_a_lib=no
 	      case $deplibs_check_method in
 		match_pattern*)
 		  set dummy $deplibs_check_method; shift
 		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`

 		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \

 		    | $EGREP "$match_pattern_regex" > /dev/null; then

 		    valid_a_lib=yes
 		  fi

 		;;

 		pass_all)
 		  valid_a_lib=yes

 		;;

 	      esac
 	      if test "$valid_a_lib" != yes; then

 		echo

 		$ECHO "*** Warning: Trying to link with static lib archive $deplib."

 		echo "*** I have the capability to make that library automatically link in when"
 		echo "*** you link to this library.  But I can only do this if you have a"
 		echo "*** shared version of the library, which you do not appear to have"
 		echo "*** because the file extensions .$libext of this argument makes me believe"
 		echo "*** that it is just a static archive that I should not use here."

 	      else

 		echo

 		$ECHO "*** Warning: Linking the shared library $output against the"
 		$ECHO "*** static library $deplib is not portable!"
 		deplibs="$deplib $deplibs"
 	      fi
 	      ;;
 	    esac

 	    continue
 	    ;;
 	  prog)
 	    if test "$pass" != link; then
 	      deplibs="$deplib $deplibs"
 	    else
 	      compile_deplibs="$deplib $compile_deplibs"
 	      finalize_deplibs="$deplib $finalize_deplibs"
 	    fi
 	    continue
 	    ;;
 	  esac # linkmode
 	  ;; # *.$libext
 	*.lo | *.$objext)
 	  if test "$pass" = conv; then
 	    deplibs="$deplib $deplibs"
 	  elif test "$linkmode" = prog; then
 	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
 	      # If there is no dlopen support or we're linking statically,
 	      # we need to preload.

 	      func_append newdlprefiles " $deplib"

 	      compile_deplibs="$deplib $compile_deplibs"
 	      finalize_deplibs="$deplib $finalize_deplibs"
 	    else

 	      func_append newdlfiles " $deplib"

 	    fi
 	  fi
 	  continue
 	  ;;
 	%DEPLIBS%)
 	  alldeplibs=yes
 	  continue
 	  ;;
 	esac # case $deplib

 	if test "$found" = yes || test -f "$lib"; then :
 	else

 	  func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"

 	fi
 
 	# Check to see that this really is a libtool archive.

 	func_lalib_unsafe_p "$lib" \
 	  || func_fatal_error "\`$lib' is not a valid libtool archive"

 	func_dirname "$lib" "" "."
 	ladir="$func_dirname_result"

 
 	dlname=
 	dlopen=
 	dlpreopen=
 	libdir=
 	library_names=
 	old_library=

 	inherited_linker_flags=

 	# If the library was installed with an old release of libtool,
 	# it will not redefine variables installed, or shouldnotlink
 	installed=yes
 	shouldnotlink=no
 	avoidtemprpath=
 
 
 	# Read the .la file

 	func_source "$lib"
 
 	# Convert "-framework foo" to "foo.ltframework"
 	if test -n "$inherited_linker_flags"; then

 	  tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`

 	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
 	    case " $new_inherited_linker_flags " in
 	      *" $tmp_inherited_linker_flag "*) ;;

 	      *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;

 	    esac
 	  done
 	fi

 	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`

 	if test "$linkmode,$pass" = "lib,link" ||
 	   test "$linkmode,$pass" = "prog,scan" ||
 	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then

 	  test -n "$dlopen" && func_append dlfiles " $dlopen"
 	  test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"

 	fi
 
 	if test "$pass" = conv; then
 	  # Only check for convenience libraries
 	  deplibs="$lib $deplibs"
 	  if test -z "$libdir"; then
 	    if test -z "$old_library"; then

 	      func_fatal_error "cannot find name of link library for \`$lib'"

 	    fi
 	    # It is a libtool convenience library, so add in its objects.

 	    func_append convenience " $ladir/$objdir/$old_library"
 	    func_append old_convenience " $ladir/$objdir/$old_library"

 	    tmp_libs=
 	    for deplib in $dependency_libs; do
 	      deplibs="$deplib $deplibs"
 	      if $opt_preserve_dup_deps ; then
 		case "$tmp_libs " in
 		*" $deplib "*) func_append specialdeplibs " $deplib" ;;
 		esac
 	      fi
 	      func_append tmp_libs " $deplib"
 	    done

 	  elif test "$linkmode" != prog && test "$linkmode" != lib; then

 	    func_fatal_error "\`$lib' is not a convenience library"

 	  fi
 	  continue
 	fi # $pass = conv
 
 
 	# Get the name of the library we link against.
 	linklib=

 	if test -n "$old_library" &&
 	   { test "$prefer_static_libs" = yes ||
 	     test "$prefer_static_libs,$installed" = "built,no"; }; then
 	  linklib=$old_library
 	else
 	  for l in $old_library $library_names; do
 	    linklib="$l"
 	  done
 	fi

 	if test -z "$linklib"; then

 	  func_fatal_error "cannot find name of link library for \`$lib'"

 	fi
 
 	# This library was specified with -dlopen.
 	if test "$pass" = dlopen; then
 	  if test -z "$libdir"; then

 	    func_fatal_error "cannot -dlopen a convenience library: \`$lib'"

 	  fi
 	  if test -z "$dlname" ||
 	     test "$dlopen_support" != yes ||
 	     test "$build_libtool_libs" = no; then
 	    # If there is no dlname, no dlopen support or we're linking
 	    # statically, we need to preload.  We also need to preload any
 	    # dependent libraries so libltdl's deplib preloader doesn't
 	    # bomb out in the load deplibs phase.

 	    func_append dlprefiles " $lib $dependency_libs"

 	  else

 	    func_append newdlfiles " $lib"

 	  fi
 	  continue
 	fi # $pass = dlopen
 
 	# We need an absolute path.
 	case $ladir in
 	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
 	*)
 	  abs_ladir=`cd "$ladir" && pwd`
 	  if test -z "$abs_ladir"; then

 	    func_warning "cannot determine absolute directory name of \`$ladir'"
 	    func_warning "passing it literally to the linker, although it might fail"

 	    abs_ladir="$ladir"
 	  fi
 	  ;;
 	esac

 	func_basename "$lib"
 	laname="$func_basename_result"

 
 	# Find the relevant object directory and library name.
 	if test "X$installed" = Xyes; then

 	  if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then

 	    func_warning "library \`$lib' was moved."

 	    dir="$ladir"
 	    absdir="$abs_ladir"
 	    libdir="$abs_ladir"
 	  else

 	    dir="$lt_sysroot$libdir"
 	    absdir="$lt_sysroot$libdir"

 	  fi
 	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
 	else
 	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
 	    dir="$ladir"
 	    absdir="$abs_ladir"
 	    # Remove this search path later

 	    func_append notinst_path " $abs_ladir"

 	  else
 	    dir="$ladir/$objdir"
 	    absdir="$abs_ladir/$objdir"
 	    # Remove this search path later

 	    func_append notinst_path " $abs_ladir"

 	  fi
 	fi # $installed = yes

 	func_stripname 'lib' '.la' "$laname"
 	name=$func_stripname_result

 
 	# This library was specified with -dlpreopen.
 	if test "$pass" = dlpreopen; then

 	  if test -z "$libdir" && test "$linkmode" = prog; then
 	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"

 	  fi

 	  case "$host" in
 	    # special handling for platforms with PE-DLLs.
 	    *cygwin* | *mingw* | *cegcc* )
 	      # Linker will automatically link against shared library if both
 	      # static and shared are present.  Therefore, ensure we extract
 	      # symbols from the import library if a shared library is present
 	      # (otherwise, the dlopen module name will be incorrect).  We do
 	      # this by putting the import library name into $newdlprefiles.
 	      # We recover the dlopen module name by 'saving' the la file
 	      # name in a special purpose variable, and (later) extracting the
 	      # dlname from the la file.
 	      if test -n "$dlname"; then
 	        func_tr_sh "$dir/$linklib"
 	        eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
 	        func_append newdlprefiles " $dir/$linklib"
 	      else
 	        func_append newdlprefiles " $dir/$old_library"
 	        # Keep a list of preopened convenience libraries to check
 	        # that they are being used correctly in the link pass.
 	        test -z "$libdir" && \
 	          func_append dlpreconveniencelibs " $dir/$old_library"
 	      fi
 	    ;;
 	    * )
 	      # Prefer using a static library (so that no silly _DYNAMIC symbols
 	      # are required to link).
 	      if test -n "$old_library"; then
 	        func_append newdlprefiles " $dir/$old_library"
 	        # Keep a list of preopened convenience libraries to check
 	        # that they are being used correctly in the link pass.
 	        test -z "$libdir" && \
 	          func_append dlpreconveniencelibs " $dir/$old_library"
 	      # Otherwise, use the dlname, so that lt_dlopen finds it.
 	      elif test -n "$dlname"; then
 	        func_append newdlprefiles " $dir/$dlname"
 	      else
 	        func_append newdlprefiles " $dir/$linklib"
 	      fi
 	    ;;
 	  esac

 	fi # $pass = dlpreopen
 
 	if test -z "$libdir"; then
 	  # Link the convenience library
 	  if test "$linkmode" = lib; then
 	    deplibs="$dir/$old_library $deplibs"
 	  elif test "$linkmode,$pass" = "prog,link"; then
 	    compile_deplibs="$dir/$old_library $compile_deplibs"
 	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
 	  else
 	    deplibs="$lib $deplibs" # used for prog,scan pass
 	  fi
 	  continue
 	fi
 
 
 	if test "$linkmode" = prog && test "$pass" != link; then

 	  func_append newlib_search_path " $ladir"

 	  deplibs="$lib $deplibs"
 
 	  linkalldeplibs=no
 	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
 	     test "$build_libtool_libs" = no; then
 	    linkalldeplibs=yes
 	  fi
 
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
 	    case $deplib in

 	    -L*) func_stripname '-L' '' "$deplib"

 	         func_resolve_sysroot "$func_stripname_result"
 	         func_append newlib_search_path " $func_resolve_sysroot_result"

 		 ;;

 	    esac
 	    # Need to link against all dependency_libs?
 	    if test "$linkalldeplibs" = yes; then
 	      deplibs="$deplib $deplibs"
 	    else
 	      # Need to hardcode shared library paths
 	      # or/and link against static libraries
 	      newdependency_libs="$deplib $newdependency_libs"
 	    fi

 	    if $opt_preserve_dup_deps ; then

 	      case "$tmp_libs " in

 	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;

 	      esac
 	    fi

 	    func_append tmp_libs " $deplib"

 	  done # for deplib
 	  continue
 	fi # $linkmode = prog...
 
 	if test "$linkmode,$pass" = "prog,link"; then
 	  if test -n "$library_names" &&

 	     { { test "$prefer_static_libs" = no ||

 	         test "$prefer_static_libs,$installed" = "built,yes"; } ||

 	       test -z "$old_library"; }; then

 	    # We need to hardcode the library path
 	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
 	      # Make sure the rpath contains only unique directories.

 	      case "$temp_rpath:" in
 	      *"$absdir:"*) ;;

 	      *) func_append temp_rpath "$absdir:" ;;

 	      esac
 	    fi
 
 	    # Hardcode the library path.
 	    # Skip directories that are in the system default run-time
 	    # search path.
 	    case " $sys_lib_dlsearch_path " in
 	    *" $absdir "*) ;;
 	    *)
 	      case "$compile_rpath " in
 	      *" $absdir "*) ;;

 	      *) func_append compile_rpath " $absdir" ;;

 	      esac
 	      ;;
 	    esac
 	    case " $sys_lib_dlsearch_path " in
 	    *" $libdir "*) ;;
 	    *)
 	      case "$finalize_rpath " in
 	      *" $libdir "*) ;;

 	      *) func_append finalize_rpath " $libdir" ;;

 	      esac
 	      ;;
 	    esac
 	  fi # $linkmode,$pass = prog,link...
 
 	  if test "$alldeplibs" = yes &&
 	     { test "$deplibs_check_method" = pass_all ||
 	       { test "$build_libtool_libs" = yes &&
 		 test -n "$library_names"; }; }; then
 	    # We only need to search for static libraries
 	    continue
 	  fi
 	fi
 
 	link_static=no # Whether the deplib will be linked statically
 	use_static_libs=$prefer_static_libs

 	if test "$use_static_libs" = built && test "$installed" = yes; then

 	  use_static_libs=no
 	fi
 	if test -n "$library_names" &&
 	   { test "$use_static_libs" = no || test -z "$old_library"; }; then

 	  case $host in
 	  *cygwin* | *mingw* | *cegcc*)
 	      # No point in relinking DLLs because paths are not encoded

 	      func_append notinst_deplibs " $lib"

 	      need_relink=no
 	    ;;
 	  *)
 	    if test "$installed" = no; then

 	      func_append notinst_deplibs " $lib"

 	      need_relink=yes
 	    fi
 	    ;;
 	  esac

 	  # This is a shared library
 

 	  # Warn about portability, can't link against -module's on some
 	  # systems (darwin).  Don't bleat about dlopened modules though!
 	  dlopenmodule=""
 	  for dlpremoduletest in $dlprefiles; do
 	    if test "X$dlpremoduletest" = "X$lib"; then
 	      dlopenmodule="$dlpremoduletest"
 	      break
 	    fi
 	  done
 	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then

 	    echo

 	    if test "$linkmode" = prog; then

 	      $ECHO "*** Warning: Linking the executable $output against the loadable module"

 	    else

 	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"

 	    fi

 	    $ECHO "*** $linklib is not portable!"

 	  fi
 	  if test "$linkmode" = lib &&
 	     test "$hardcode_into_libs" = yes; then
 	    # Hardcode the library path.
 	    # Skip directories that are in the system default run-time
 	    # search path.
 	    case " $sys_lib_dlsearch_path " in
 	    *" $absdir "*) ;;
 	    *)
 	      case "$compile_rpath " in
 	      *" $absdir "*) ;;

 	      *) func_append compile_rpath " $absdir" ;;

 	      esac
 	      ;;
 	    esac
 	    case " $sys_lib_dlsearch_path " in
 	    *" $libdir "*) ;;
 	    *)
 	      case "$finalize_rpath " in
 	      *" $libdir "*) ;;

 	      *) func_append finalize_rpath " $libdir" ;;

 	      esac
 	      ;;
 	    esac
 	  fi
 
 	  if test -n "$old_archive_from_expsyms_cmds"; then
 	    # figure out the soname
 	    set dummy $library_names

 	    shift
 	    realname="$1"
 	    shift
 	    libname=`eval "\\$ECHO \"$libname_spec\""`

 	    # use dlname if we got it. it's perfectly good, no?
 	    if test -n "$dlname"; then
 	      soname="$dlname"
 	    elif test -n "$soname_spec"; then
 	      # bleh windows
 	      case $host in

 	      *cygwin* | mingw* | *cegcc*)
 	        func_arith $current - $age
 		major=$func_arith_result

 		versuffix="-$major"
 		;;
 	      esac
 	      eval soname=\"$soname_spec\"
 	    else
 	      soname="$realname"
 	    fi
 
 	    # Make a new name for the extract_expsyms_cmds to use
 	    soroot="$soname"

 	    func_basename "$soroot"
 	    soname="$func_basename_result"
 	    func_stripname 'lib' '.dll' "$soname"
 	    newlib=libimp-$func_stripname_result.a

 
 	    # If the library has no export list, then create one now
 	    if test -f "$output_objdir/$soname-def"; then :
 	    else

 	      func_verbose "extracting exported symbol list from \`$soname'"
 	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'

 	    fi
 
 	    # Create $newlib
 	    if test -f "$output_objdir/$newlib"; then :; else

 	      func_verbose "generating import library for \`$soname'"
 	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'

 	    fi
 	    # make sure the library variables are pointing to the new library
 	    dir=$output_objdir
 	    linklib=$newlib
 	  fi # test -n "$old_archive_from_expsyms_cmds"
 

 	  if test "$linkmode" = prog || test "$opt_mode" != relink; then

 	    add_shlibpath=
 	    add_dir=
 	    add=
 	    lib_linked=yes
 	    case $hardcode_action in
 	    immediate | unsupported)
 	      if test "$hardcode_direct" = no; then
 		add="$dir/$linklib"
 		case $host in
 		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
 		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
 		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
 		    *-*-unixware7*) add_dir="-L$dir" ;;
 		  *-*-darwin* )

 		    # if the lib is a (non-dlopened) module then we can not
 		    # link against it, someone is ignoring the earlier warnings

 		    if /usr/bin/file -L $add 2> /dev/null |

 			 $GREP ": [^:]* bundle" >/dev/null ; then
 		      if test "X$dlopenmodule" != "X$lib"; then
 			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
 			if test -z "$old_library" ; then

 			  echo
 			  echo "*** And there doesn't seem to be a static archive available"
 			  echo "*** The link will probably fail, sorry"

 			else
 			  add="$dir/$old_library"
 			fi
 		      elif test -n "$old_library"; then
 			add="$dir/$old_library"

 		      fi
 		    fi
 		esac
 	      elif test "$hardcode_minus_L" = no; then
 		case $host in
 		*-*-sunos*) add_shlibpath="$dir" ;;
 		esac
 		add_dir="-L$dir"
 		add="-l$name"
 	      elif test "$hardcode_shlibpath_var" = no; then
 		add_shlibpath="$dir"
 		add="-l$name"
 	      else
 		lib_linked=no
 	      fi
 	      ;;
 	    relink)

 	      if test "$hardcode_direct" = yes &&
 	         test "$hardcode_direct_absolute" = no; then

 		add="$dir/$linklib"
 	      elif test "$hardcode_minus_L" = yes; then

 		add_dir="-L$absdir"

 		# Try looking first in the location we're being installed to.
 		if test -n "$inst_prefix_dir"; then
 		  case $libdir in
 		    [\\/]*)

 		      func_append add_dir " -L$inst_prefix_dir$libdir"

 		      ;;
 		  esac
 		fi
 		add="-l$name"
 	      elif test "$hardcode_shlibpath_var" = yes; then
 		add_shlibpath="$dir"
 		add="-l$name"
 	      else
 		lib_linked=no
 	      fi
 	      ;;
 	    *) lib_linked=no ;;
 	    esac
 
 	    if test "$lib_linked" != yes; then

 	      func_fatal_configuration "unsupported hardcode properties"

 	    fi
 
 	    if test -n "$add_shlibpath"; then
 	      case :$compile_shlibpath: in
 	      *":$add_shlibpath:"*) ;;

 	      *) func_append compile_shlibpath "$add_shlibpath:" ;;

 	      esac
 	    fi
 	    if test "$linkmode" = prog; then
 	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
 	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
 	    else
 	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
 	      test -n "$add" && deplibs="$add $deplibs"

 	      if test "$hardcode_direct" != yes &&
 		 test "$hardcode_minus_L" != yes &&

 		 test "$hardcode_shlibpath_var" = yes; then
 		case :$finalize_shlibpath: in
 		*":$libdir:"*) ;;

 		*) func_append finalize_shlibpath "$libdir:" ;;

 		esac
 	      fi
 	    fi
 	  fi
 

 	  if test "$linkmode" = prog || test "$opt_mode" = relink; then

 	    add_shlibpath=
 	    add_dir=
 	    add=
 	    # Finalize command for both is simple: just hardcode it.

 	    if test "$hardcode_direct" = yes &&
 	       test "$hardcode_direct_absolute" = no; then

 	      add="$libdir/$linklib"
 	    elif test "$hardcode_minus_L" = yes; then
 	      add_dir="-L$libdir"
 	      add="-l$name"
 	    elif test "$hardcode_shlibpath_var" = yes; then
 	      case :$finalize_shlibpath: in
 	      *":$libdir:"*) ;;

 	      *) func_append finalize_shlibpath "$libdir:" ;;

 	      esac
 	      add="-l$name"
 	    elif test "$hardcode_automatic" = yes; then
 	      if test -n "$inst_prefix_dir" &&
 		 test -f "$inst_prefix_dir$libdir/$linklib" ; then

 		add="$inst_prefix_dir$libdir/$linklib"

 	      else

 		add="$libdir/$linklib"

 	      fi
 	    else
 	      # We cannot seem to hardcode it, guess we'll fake it.
 	      add_dir="-L$libdir"
 	      # Try looking first in the location we're being installed to.
 	      if test -n "$inst_prefix_dir"; then
 		case $libdir in
 		  [\\/]*)

 		    func_append add_dir " -L$inst_prefix_dir$libdir"

 		    ;;
 		esac
 	      fi
 	      add="-l$name"
 	    fi
 
 	    if test "$linkmode" = prog; then
 	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
 	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
 	    else
 	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
 	      test -n "$add" && deplibs="$add $deplibs"
 	    fi
 	  fi
 	elif test "$linkmode" = prog; then
 	  # Here we assume that one of hardcode_direct or hardcode_minus_L
 	  # is not unsupported.  This is valid on all known static and
 	  # shared platforms.
 	  if test "$hardcode_direct" != unsupported; then
 	    test -n "$old_library" && linklib="$old_library"
 	    compile_deplibs="$dir/$linklib $compile_deplibs"
 	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
 	  else
 	    compile_deplibs="-l$name -L$dir $compile_deplibs"
 	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
 	  fi
 	elif test "$build_libtool_libs" = yes; then
 	  # Not a shared library
 	  if test "$deplibs_check_method" != pass_all; then
 	    # We're trying link a shared library against a static one
 	    # but the system doesn't support it.
 
 	    # Just print a warning and add the library to dependency_libs so
 	    # that the program can be linked against the static library.

 	    echo

 	    $ECHO "*** Warning: This system can not link to static lib archive $lib."

 	    echo "*** I have the capability to make that library automatically link in when"
 	    echo "*** you link to this library.  But I can only do this if you have a"
 	    echo "*** shared version of the library, which you do not appear to have."

 	    if test "$module" = yes; then

 	      echo "*** But as you try to build a module library, libtool will still create "
 	      echo "*** a static module, that should work as long as the dlopening application"
 	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."

 	      if test -z "$global_symbol_pipe"; then

 		echo
 		echo "*** However, this would only work if libtool was able to extract symbol"
 		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
 		echo "*** not find such a program.  So, this module is probably useless."
 		echo "*** \`nm' from GNU binutils and a full rebuild may help."

 	      fi
 	      if test "$build_old_libs" = no; then
 		build_libtool_libs=module
 		build_old_libs=yes
 	      else
 		build_libtool_libs=no
 	      fi
 	    fi
 	  else
 	    deplibs="$dir/$old_library $deplibs"
 	    link_static=yes
 	  fi
 	fi # link shared/static library?
 
 	if test "$linkmode" = lib; then
 	  if test -n "$dependency_libs" &&
 	     { test "$hardcode_into_libs" != yes ||
 	       test "$build_old_libs" = yes ||
 	       test "$link_static" = yes; }; then
 	    # Extract -R from dependency_libs
 	    temp_deplibs=
 	    for libdir in $dependency_libs; do
 	      case $libdir in

 	      -R*) func_stripname '-R' '' "$libdir"
 	           temp_xrpath=$func_stripname_result

 		   case " $xrpath " in
 		   *" $temp_xrpath "*) ;;

 		   *) func_append xrpath " $temp_xrpath";;

 		   esac;;

 	      *) func_append temp_deplibs " $libdir";;

 	      esac
 	    done
 	    dependency_libs="$temp_deplibs"
 	  fi
 

 	  func_append newlib_search_path " $absdir"

 	  # Link against this library
 	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
 	  # ... and its dependency_libs
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
 	    newdependency_libs="$deplib $newdependency_libs"

 	    case $deplib in
               -L*) func_stripname '-L' '' "$deplib"
                    func_resolve_sysroot "$func_stripname_result";;
               *) func_resolve_sysroot "$deplib" ;;
             esac
 	    if $opt_preserve_dup_deps ; then

 	      case "$tmp_libs " in

 	      *" $func_resolve_sysroot_result "*)
                 func_append specialdeplibs " $func_resolve_sysroot_result" ;;

 	      esac
 	    fi

 	    func_append tmp_libs " $func_resolve_sysroot_result"

 	  done
 
 	  if test "$link_all_deplibs" != no; then
 	    # Add the search paths of all dependency libraries
 	    for deplib in $dependency_libs; do

 	      path=

 	      case $deplib in
 	      -L*) path="$deplib" ;;
 	      *.la)

 	        func_resolve_sysroot "$deplib"
 	        deplib=$func_resolve_sysroot_result

 	        func_dirname "$deplib" "" "."

 		dir=$func_dirname_result

 		# We need an absolute path.
 		case $dir in
 		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
 		*)
 		  absdir=`cd "$dir" && pwd`
 		  if test -z "$absdir"; then

 		    func_warning "cannot determine absolute directory name of \`$dir'"

 		    absdir="$dir"
 		  fi
 		  ;;
 		esac

 		if $GREP "^installed=no" $deplib > /dev/null; then

 		case $host in
 		*-*-darwin*)

 		  depdepl=

 		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
 		  if test -n "$deplibrary_names" ; then
 		    for tmp in $deplibrary_names ; do
 		      depdepl=$tmp
 		    done

 		    if test -f "$absdir/$objdir/$depdepl" ; then
 		      depdepl="$absdir/$objdir/$depdepl"
 		      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
                       if test -z "$darwin_install_name"; then
                           darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
                       fi

 		      func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
 		      func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"

 		      path=

 		    fi
 		  fi
 		  ;;
 		*)

 		  path="-L$absdir/$objdir"

 		  ;;
 		esac

 		else
 		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
 		  test -z "$libdir" && \
 		    func_fatal_error "\`$deplib' is not a valid libtool archive"
 		  test "$absdir" != "$libdir" && \
 		    func_warning "\`$deplib' seems to be moved"
 
 		  path="-L$absdir"
 		fi

 		;;
 	      esac
 	      case " $deplibs " in
 	      *" $path "*) ;;
 	      *) deplibs="$path $deplibs" ;;
 	      esac
 	    done
 	  fi # link_all_deplibs != no
 	fi # linkmode = lib
       done # for deplib in $libs

       if test "$pass" = link; then
 	if test "$linkmode" = "prog"; then
 	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
 	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
 	else

 	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`

 	fi
       fi

       dependency_libs="$newdependency_libs"
       if test "$pass" = dlpreopen; then
 	# Link the dlpreopened libraries before other libraries
 	for deplib in $save_deplibs; do
 	  deplibs="$deplib $deplibs"
 	done
       fi
       if test "$pass" != dlopen; then
 	if test "$pass" != conv; then
 	  # Make sure lib_search_path contains only unique directories.
 	  lib_search_path=
 	  for dir in $newlib_search_path; do
 	    case "$lib_search_path " in
 	    *" $dir "*) ;;

 	    *) func_append lib_search_path " $dir" ;;

 	    esac
 	  done
 	  newlib_search_path=
 	fi
 
 	if test "$linkmode,$pass" != "prog,link"; then
 	  vars="deplibs"
 	else
 	  vars="compile_deplibs finalize_deplibs"
 	fi
 	for var in $vars dependency_libs; do
 	  # Add libraries to $var in reverse order
 	  eval tmp_libs=\"\$$var\"
 	  new_libs=
 	  for deplib in $tmp_libs; do
 	    # FIXME: Pedantically, this is the right thing to do, so
 	    #        that some nasty dependency loop isn't accidentally
 	    #        broken:
 	    #new_libs="$deplib $new_libs"
 	    # Pragmatically, this seems to cause very few problems in
 	    # practice:
 	    case $deplib in
 	    -L*) new_libs="$deplib $new_libs" ;;
 	    -R*) ;;
 	    *)
 	      # And here is the reason: when a library appears more
 	      # than once as an explicit dependence of a library, or
 	      # is implicitly linked in more than once by the
 	      # compiler, it is considered special, and multiple
 	      # occurrences thereof are not removed.  Compare this
 	      # with having the same library being listed as a
 	      # dependency of multiple other libraries: in this case,
 	      # we know (pedantically, we assume) the library does not
 	      # need to be listed more than once, so we keep only the
 	      # last copy.  This is not always right, but it is rare
 	      # enough that we require users that really mean to play
 	      # such unportable linking tricks to link the library
 	      # using -Wl,-lname, so that libtool does not consider it
 	      # for duplicate removal.
 	      case " $specialdeplibs " in
 	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
 	      *)
 		case " $new_libs " in
 		*" $deplib "*) ;;
 		*) new_libs="$deplib $new_libs" ;;
 		esac
 		;;
 	      esac
 	      ;;
 	    esac
 	  done
 	  tmp_libs=
 	  for deplib in $new_libs; do
 	    case $deplib in
 	    -L*)
 	      case " $tmp_libs " in
 	      *" $deplib "*) ;;

 	      *) func_append tmp_libs " $deplib" ;;

 	      esac
 	      ;;

 	    *) func_append tmp_libs " $deplib" ;;

 	    esac
 	  done
 	  eval $var=\"$tmp_libs\"
 	done # for var
       fi
       # Last step: remove runtime libs from dependency_libs
       # (they stay in deplibs)
       tmp_libs=
       for i in $dependency_libs ; do
 	case " $predeps $postdeps $compiler_lib_search_path " in
 	*" $i "*)
 	  i=""
 	  ;;
 	esac
 	if test -n "$i" ; then

 	  func_append tmp_libs " $i"

 	fi
       done
       dependency_libs=$tmp_libs
     done # for pass
     if test "$linkmode" = prog; then
       dlfiles="$newdlfiles"

     fi
     if test "$linkmode" = prog || test "$linkmode" = lib; then

       dlprefiles="$newdlprefiles"
     fi
 
     case $linkmode in
     oldlib)

       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
 	func_warning "\`-dlopen' is ignored for archives"
       fi
 

       case " $deplibs" in
       *\ -l* | *\ -L*)

 	func_warning "\`-l' and \`-L' are ignored for archives" ;;

       esac

       test -n "$rpath" && \
 	func_warning "\`-rpath' is ignored for archives"

       test -n "$xrpath" && \
 	func_warning "\`-R' is ignored for archives"

       test -n "$vinfo" && \
 	func_warning "\`-version-info/-version-number' is ignored for archives"

       test -n "$release" && \
 	func_warning "\`-release' is ignored for archives"

       test -n "$export_symbols$export_symbols_regex" && \
 	func_warning "\`-export-symbols' is ignored for archives"

 
       # Now set the variables for building old libraries.
       build_libtool_libs=no
       oldlibs="$output"

       func_append objs "$old_deplibs"

       ;;
 
     lib)
       # Make sure we only generate libraries of the form `libNAME.la'.
       case $outputname in
       lib*)

 	func_stripname 'lib' '.la' "$outputname"
 	name=$func_stripname_result

 	eval shared_ext=\"$shrext_cmds\"
 	eval libname=\"$libname_spec\"
 	;;
       *)

 	test "$module" = no && \
 	  func_fatal_help "libtool library \`$output' must begin with \`lib'"
 

 	if test "$need_lib_prefix" != no; then
 	  # Add the "lib" prefix for modules if required

 	  func_stripname '' '.la' "$outputname"
 	  name=$func_stripname_result

 	  eval shared_ext=\"$shrext_cmds\"
 	  eval libname=\"$libname_spec\"
 	else

 	  func_stripname '' '.la' "$outputname"
 	  libname=$func_stripname_result

 	fi
 	;;
       esac
 
       if test -n "$objs"; then
 	if test "$deplibs_check_method" != pass_all; then

 	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"

 	else

 	  echo

 	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
 	  $ECHO "*** objects $objs is not portable!"

 	  func_append libobjs " $objs"

 	fi
       fi
 

       test "$dlself" != no && \
 	func_warning "\`-dlopen self' is ignored for libtool libraries"

 
       set dummy $rpath

       shift
       test "$#" -gt 1 && \
 	func_warning "ignoring multiple \`-rpath's for a libtool library"
 
       install_libdir="$1"

 
       oldlibs=
       if test -z "$rpath"; then
 	if test "$build_libtool_libs" = yes; then
 	  # Building a libtool convenience library.
 	  # Some compilers have problems with a `.al' extension so
 	  # convenience libraries should have the same extension an
 	  # archive normally would.
 	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
 	  build_libtool_libs=convenience
 	  build_old_libs=yes
 	fi
 

 	test -n "$vinfo" && \
 	  func_warning "\`-version-info/-version-number' is ignored for convenience libraries"

 	test -n "$release" && \
 	  func_warning "\`-release' is ignored for convenience libraries"

       else
 
 	# Parse the version information argument.
 	save_ifs="$IFS"; IFS=':'
 	set dummy $vinfo 0 0 0

 	shift

 	IFS="$save_ifs"
 

 	test -n "$7" && \
 	  func_fatal_help "too many parameters to \`-version-info'"

 
 	# convert absolute version numbers to libtool ages
 	# this retains compatibility with .la files and attempts
 	# to make the code below a bit more comprehensible
 
 	case $vinfo_number in
 	yes)

 	  number_major="$1"
 	  number_minor="$2"
 	  number_revision="$3"

 	  #
 	  # There are really only two kinds -- those that
 	  # use the current revision as the major version
 	  # and those that subtract age and use age as
 	  # a minor version.  But, then there is irix
 	  # which has an extra 1 added just for fun
 	  #
 	  case $version_type in

 	  # correct linux to gnu/linux during the next big refactor

 	  darwin|linux|osf|windows|none)

 	    func_arith $number_major + $number_minor
 	    current=$func_arith_result

 	    age="$number_minor"
 	    revision="$number_revision"
 	    ;;

 	  freebsd-aout|freebsd-elf|qnx|sunos)

 	    current="$number_major"
 	    revision="$number_minor"
 	    age="0"
 	    ;;
 	  irix|nonstopux)

 	    func_arith $number_major + $number_minor
 	    current=$func_arith_result

 	    age="$number_minor"
 	    revision="$number_minor"

 	    lt_irix_increment=no

 	    ;;

 	  *)
 	    func_fatal_configuration "$modename: unknown library version type \`$version_type'"
 	    ;;

 	  esac
 	  ;;
 	no)

 	  current="$1"
 	  revision="$2"
 	  age="$3"

 	  ;;
 	esac
 
 	# Check that each of the things are valid numbers.
 	case $current in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)

 	  func_error "CURRENT \`$current' must be a nonnegative integer"
 	  func_fatal_error "\`$vinfo' is not valid version information"

 	  ;;
 	esac
 
 	case $revision in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)

 	  func_error "REVISION \`$revision' must be a nonnegative integer"
 	  func_fatal_error "\`$vinfo' is not valid version information"

 	  ;;
 	esac
 
 	case $age in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)

 	  func_error "AGE \`$age' must be a nonnegative integer"
 	  func_fatal_error "\`$vinfo' is not valid version information"

 	  ;;
 	esac
 
 	if test "$age" -gt "$current"; then

 	  func_error "AGE \`$age' is greater than the current interface number \`$current'"
 	  func_fatal_error "\`$vinfo' is not valid version information"

 	fi
 
 	# Calculate the version variables.
 	major=
 	versuffix=
 	verstring=
 	case $version_type in
 	none) ;;
 
 	darwin)
 	  # Like Linux, but with the current version available in
 	  # verstring for coding it into the library header

 	  func_arith $current - $age
 	  major=.$func_arith_result

 	  versuffix="$major.$age.$revision"
 	  # Darwin ld doesn't like 0 for these options...

 	  func_arith $current + 1
 	  minor_current=$func_arith_result

 	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
 	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"

 	  ;;
 
 	freebsd-aout)
 	  major=".$current"
 	  versuffix=".$current.$revision";
 	  ;;
 
 	freebsd-elf)
 	  major=".$current"

 	  versuffix=".$current"

 	  ;;
 
 	irix | nonstopux)

 	  if test "X$lt_irix_increment" = "Xno"; then

 	    func_arith $current - $age

 	  else

 	    func_arith $current - $age + 1

 	  fi

 	  major=$func_arith_result
 

 	  case $version_type in
 	    nonstopux) verstring_prefix=nonstopux ;;
 	    *)         verstring_prefix=sgi ;;
 	  esac
 	  verstring="$verstring_prefix$major.$revision"
 
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$revision
 	  while test "$loop" -ne 0; do

 	    func_arith $revision - $loop
 	    iface=$func_arith_result
 	    func_arith $loop - 1
 	    loop=$func_arith_result

 	    verstring="$verstring_prefix$major.$iface:$verstring"
 	  done
 
 	  # Before this point, $major must not contain `.'.
 	  major=.$major
 	  versuffix="$major.$revision"
 	  ;;
 

 	linux) # correct to gnu/linux during the next big refactor

 	  func_arith $current - $age
 	  major=.$func_arith_result

 	  versuffix="$major.$age.$revision"
 	  ;;
 
 	osf)

 	  func_arith $current - $age
 	  major=.$func_arith_result

 	  versuffix=".$current.$age.$revision"
 	  verstring="$current.$age.$revision"
 
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$age
 	  while test "$loop" -ne 0; do

 	    func_arith $current - $loop
 	    iface=$func_arith_result
 	    func_arith $loop - 1
 	    loop=$func_arith_result

 	    verstring="$verstring:${iface}.0"
 	  done
 
 	  # Make executables depend on our current version.

 	  func_append verstring ":${current}.0"

 	  ;;
 

 	qnx)
 	  major=".$current"
 	  versuffix=".$current"
 	  ;;
 

 	sunos)
 	  major=".$current"
 	  versuffix=".$current.$revision"
 	  ;;
 
 	windows)
 	  # Use '-' rather than '.', since we only want one
 	  # extension on DOS 8.3 filesystems.

 	  func_arith $current - $age
 	  major=$func_arith_result

 	  versuffix="-$major"
 	  ;;
 
 	*)

 	  func_fatal_configuration "unknown library version type \`$version_type'"

 	  ;;
 	esac
 
 	# Clear the version info if we defaulted, and they specified a release.
 	if test -z "$vinfo" && test -n "$release"; then
 	  major=
 	  case $version_type in
 	  darwin)
 	    # we can't check for "0.0" in archive_cmds due to quoting
 	    # problems, so we reset it completely
 	    verstring=
 	    ;;
 	  *)
 	    verstring="0.0"
 	    ;;
 	  esac
 	  if test "$need_version" = no; then
 	    versuffix=
 	  else
 	    versuffix=".0.0"
 	  fi
 	fi
 
 	# Remove version info from name if versioning should be avoided
 	if test "$avoid_version" = yes && test "$need_version" = no; then
 	  major=
 	  versuffix=
 	  verstring=""
 	fi
 
 	# Check to see if the archive will have undefined symbols.
 	if test "$allow_undefined" = yes; then
 	  if test "$allow_undefined_flag" = unsupported; then

 	    func_warning "undefined symbols not allowed in $host shared libraries"

 	    build_libtool_libs=no
 	    build_old_libs=yes
 	  fi
 	else
 	  # Don't allow undefined symbols.
 	  allow_undefined_flag="$no_undefined_flag"
 	fi

       fi
 

       func_generate_dlsyms "$libname" "$libname" "yes"

       func_append libobjs " $symfileobj"

       test "X$libobjs" = "X " && libobjs=
 

       if test "$opt_mode" != relink; then

 	# Remove our outputs, but don't remove object files since they
 	# may have been created when compiling PIC objects.
 	removelist=

 	tempremovelist=`$ECHO "$output_objdir/*"`

 	for p in $tempremovelist; do
 	  case $p in

 	    *.$objext | *.gcno)

 	       ;;
 	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
 	       if test "X$precious_files_regex" != "X"; then

 		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
 		 then

 		   continue
 		 fi
 	       fi

 	       func_append removelist " $p"

 	       ;;
 	    *) ;;
 	  esac
 	done

 	test -n "$removelist" && \
 	  func_show_eval "${RM}r \$removelist"

       fi
 
       # Now set the variables for building old libraries.
       if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then

 	func_append oldlibs " $output_objdir/$libname.$libext"

 
 	# Transform .lo files to .o files.

 	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`

       fi
 
       # Eliminate all temporary directories.

       #for path in $notinst_path; do

       #	lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
       #	deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
       #	dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`

       #done

 
       if test -n "$xrpath"; then
 	# If the user specified any rpath flags, then add them.
 	temp_xrpath=
 	for libdir in $xrpath; do

 	  func_replace_sysroot "$libdir"
 	  func_append temp_xrpath " -R$func_replace_sysroot_result"

 	  case "$finalize_rpath " in
 	  *" $libdir "*) ;;

 	  *) func_append finalize_rpath " $libdir" ;;

 	  esac
 	done
 	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
 	  dependency_libs="$temp_xrpath $dependency_libs"
 	fi
       fi
 
       # Make sure dlfiles contains only unique files that won't be dlpreopened
       old_dlfiles="$dlfiles"
       dlfiles=
       for lib in $old_dlfiles; do
 	case " $dlprefiles $dlfiles " in
 	*" $lib "*) ;;

 	*) func_append dlfiles " $lib" ;;

 	esac
       done
 
       # Make sure dlprefiles contains only unique files
       old_dlprefiles="$dlprefiles"
       dlprefiles=
       for lib in $old_dlprefiles; do
 	case "$dlprefiles " in
 	*" $lib "*) ;;

 	*) func_append dlprefiles " $lib" ;;

 	esac
       done
 
       if test "$build_libtool_libs" = yes; then
 	if test -n "$rpath"; then
 	  case $host in

 	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)

 	    # these systems don't actually have a c library (as such)!
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.[012])
 	    # Rhapsody C library is in the System framework

 	    func_append deplibs " System.ltframework"

 	    ;;
 	  *-*-netbsd*)
 	    # Don't link with libc until the a.out ld.so is fixed.
 	    ;;
 	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
 	    # Do not include libc due to us having libc/libc_r.
 	    ;;
 	  *-*-sco3.2v5* | *-*-sco5v6*)
 	    # Causes problems with __ctype
 	    ;;
 	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
 	    # Compiler inserts libc in the correct place for threads to work
 	    ;;

 	  *)

 	    # Add libc to deplibs on all other systems if necessary.
 	    if test "$build_libtool_need_lc" = "yes"; then

 	      func_append deplibs " -lc"

 	    fi
 	    ;;
 	  esac
 	fi
 
 	# Transform deplibs into only deplibs that can be linked in shared.
 	name_save=$name
 	libname_save=$libname
 	release_save=$release
 	versuffix_save=$versuffix
 	major_save=$major
 	# I'm not sure if I'm treating the release correctly.  I think
 	# release should show up in the -l (ie -lgmp5) so we don't want to
 	# add it in twice.  Is that correct?
 	release=""
 	versuffix=""
 	major=""
 	newdeplibs=
 	droppeddeps=no
 	case $deplibs_check_method in
 	pass_all)
 	  # Don't check for shared/static.  Everything works.
 	  # This might be a little naive.  We might want to check
 	  # whether the library exists or not.  But this is on
 	  # osf3 & osf4 and I'm not really sure... Just
 	  # implementing what was already the behavior.
 	  newdeplibs=$deplibs
 	  ;;
 	test_compile)
 	  # This code stresses the "libraries are programs" paradigm to its
 	  # limits. Maybe even breaks it.  We compile a program, linking it
 	  # against the deplibs as a proxy for the library.  Then we can check
 	  # whether they linked in statically or dynamically with ldd.

 	  $opt_dry_run || $RM conftest.c

 	  cat > conftest.c <<EOF
 	  int main() { return 0; }
 EOF

 	  $opt_dry_run || $RM conftest

 	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then

 	    ldd_output=`ldd conftest`
 	    for i in $deplibs; do

 	      case $i in
 	      -l*)
 		func_stripname -l '' "$i"
 		name=$func_stripname_result

 		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		  case " $predeps $postdeps " in
 		  *" $i "*)

 		    func_append newdeplibs " $i"

 		    i=""
 		    ;;
 		  esac

 		fi

 		if test -n "$i" ; then

 		  libname=`eval "\\$ECHO \"$libname_spec\""`
 		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
 		  set dummy $deplib_matches; shift
 		  deplib_match=$1

 		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then

 		    func_append newdeplibs " $i"

 		  else
 		    droppeddeps=yes

 		    echo

 		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."

 		    echo "*** I have the capability to make that library automatically link in when"
 		    echo "*** you link to this library.  But I can only do this if you have a"
 		    echo "*** shared version of the library, which I believe you do not have"
 		    echo "*** because a test_compile did reveal that the linker did not use it for"
 		    echo "*** its dynamic dependency list that programs get resolved with at runtime."

 		  fi
 		fi

 		;;
 	      *)

 		func_append newdeplibs " $i"

 		;;
 	      esac

 	    done
 	  else
 	    # Error occurred in the first compile.  Let's try to salvage
 	    # the situation: Compile a separate program for each library.
 	    for i in $deplibs; do

 	      case $i in
 	      -l*)
 		func_stripname -l '' "$i"
 		name=$func_stripname_result
 		$opt_dry_run || $RM conftest

 		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then

 		  ldd_output=`ldd conftest`
 		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		    case " $predeps $postdeps " in
 		    *" $i "*)

 		      func_append newdeplibs " $i"

 		      i=""
 		      ;;
 		    esac
 		  fi
 		  if test -n "$i" ; then

 		    libname=`eval "\\$ECHO \"$libname_spec\""`
 		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
 		    set dummy $deplib_matches; shift
 		    deplib_match=$1

 		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then

 		      func_append newdeplibs " $i"

 		    else
 		      droppeddeps=yes

 		      echo

 		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."

 		      echo "*** I have the capability to make that library automatically link in when"
 		      echo "*** you link to this library.  But I can only do this if you have a"
 		      echo "*** shared version of the library, which you do not appear to have"
 		      echo "*** because a test_compile did reveal that the linker did not use this one"
 		      echo "*** as a dynamic dependency that programs can get resolved with at runtime."

 		    fi
 		  fi
 		else
 		  droppeddeps=yes

 		  echo

 		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"

 		  echo "*** make it link in!  You will probably need to install it or some"
 		  echo "*** library that it depends on before this library will be fully"
 		  echo "*** functional.  Installing it before continuing would be even better."

 		fi

 		;;
 	      *)

 		func_append newdeplibs " $i"

 		;;
 	      esac

 	    done
 	  fi
 	  ;;
 	file_magic*)

 	  set dummy $deplibs_check_method; shift
 	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`

 	  for a_deplib in $deplibs; do

 	    case $a_deplib in
 	    -l*)
 	      func_stripname -l '' "$a_deplib"
 	      name=$func_stripname_result

 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)

 		  func_append newdeplibs " $a_deplib"

 		  a_deplib=""
 		  ;;
 		esac
 	      fi
 	      if test -n "$a_deplib" ; then

 		libname=`eval "\\$ECHO \"$libname_spec\""`

 		if test -n "$file_magic_glob"; then
 		  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
 		else
 		  libnameglob=$libname
 		fi
 		test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`

 		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do

 		  if test "$want_nocaseglob" = yes; then
 		    shopt -s nocaseglob
 		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
 		    $nocaseglob
 		  else
 		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
 		  fi

 		  for potent_lib in $potential_libs; do
 		      # Follow soft links.

 		      if ls -lLd "$potent_lib" 2>/dev/null |
 			 $GREP " -> " >/dev/null; then

 			continue
 		      fi
 		      # The statement above tries to avoid entering an
 		      # endless loop below, in case of cyclic links.
 		      # We might still enter an endless loop, since a link
 		      # loop can be closed while we follow links,
 		      # but so what?
 		      potlib="$potent_lib"
 		      while test -h "$potlib" 2>/dev/null; do
 			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
 			case $potliblink in
 			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;

 			*) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;

 			esac
 		      done

 		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
 			 $SED -e 10q |
 			 $EGREP "$file_magic_regex" > /dev/null; then

 			func_append newdeplibs " $a_deplib"

 			a_deplib=""
 			break 2
 		      fi
 		  done
 		done
 	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes

 		echo

 		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."

 		echo "*** I have the capability to make that library automatically link in when"
 		echo "*** you link to this library.  But I can only do this if you have a"
 		echo "*** shared version of the library, which you do not appear to have"
 		echo "*** because I did check the linker path looking for a file starting"

 		if test -z "$potlib" ; then

 		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"

 		else

 		  $ECHO "*** with $libname and none of the candidates passed a file format test"
 		  $ECHO "*** using a file magic. Last file checked: $potlib"

 		fi
 	      fi

 	      ;;
 	    *)

 	      # Add a -L argument.

 	      func_append newdeplibs " $a_deplib"

 	      ;;
 	    esac

 	  done # Gone through all deplibs.
 	  ;;
 	match_pattern*)

 	  set dummy $deplibs_check_method; shift
 	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`

 	  for a_deplib in $deplibs; do

 	    case $a_deplib in
 	    -l*)
 	      func_stripname -l '' "$a_deplib"
 	      name=$func_stripname_result

 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)

 		  func_append newdeplibs " $a_deplib"

 		  a_deplib=""
 		  ;;
 		esac
 	      fi
 	      if test -n "$a_deplib" ; then

 		libname=`eval "\\$ECHO \"$libname_spec\""`

 		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
 		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
 		  for potent_lib in $potential_libs; do
 		    potlib="$potent_lib" # see symlink-check above in file_magic test

 		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \

 		       $EGREP "$match_pattern_regex" > /dev/null; then

 		      func_append newdeplibs " $a_deplib"

 		      a_deplib=""
 		      break 2
 		    fi
 		  done
 		done
 	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes

 		echo

 		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."

 		echo "*** I have the capability to make that library automatically link in when"
 		echo "*** you link to this library.  But I can only do this if you have a"
 		echo "*** shared version of the library, which you do not appear to have"
 		echo "*** because I did check the linker path looking for a file starting"

 		if test -z "$potlib" ; then

 		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"

 		else

 		  $ECHO "*** with $libname and none of the candidates passed a file format test"
 		  $ECHO "*** using a regex pattern. Last file checked: $potlib"

 		fi
 	      fi

 	      ;;
 	    *)

 	      # Add a -L argument.

 	      func_append newdeplibs " $a_deplib"

 	      ;;
 	    esac

 	  done # Gone through all deplibs.
 	  ;;
 	none | unknown | *)
 	  newdeplibs=""

 	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`

 	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 	    for i in $predeps $postdeps ; do
 	      # can't use Xsed below, because $i might contain '/'

 	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`

 	    done
 	  fi

 	  case $tmp_deplibs in
 	  *[!\	\ ]*)
 	    echo

 	    if test "X$deplibs_check_method" = "Xnone"; then

 	      echo "*** Warning: inter-library dependencies are not supported in this platform."

 	    else

 	      echo "*** Warning: inter-library dependencies are not known to be supported."

 	    fi

 	    echo "*** All declared inter-library dependencies are being dropped."

 	    droppeddeps=yes

 	    ;;
 	  esac

 	  ;;
 	esac
 	versuffix=$versuffix_save
 	major=$major_save
 	release=$release_save
 	libname=$libname_save
 	name=$name_save
 
 	case $host in
 	*-*-rhapsody* | *-*-darwin1.[012])

 	  # On Rhapsody replace the C library with the System framework

 	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`

 	  ;;
 	esac
 
 	if test "$droppeddeps" = yes; then
 	  if test "$module" = yes; then

 	    echo
 	    echo "*** Warning: libtool could not satisfy all declared inter-library"

 	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"

 	    echo "*** a static module, that should work as long as the dlopening"
 	    echo "*** application is linked with the -dlopen flag."

 	    if test -z "$global_symbol_pipe"; then

 	      echo
 	      echo "*** However, this would only work if libtool was able to extract symbol"
 	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
 	      echo "*** not find such a program.  So, this module is probably useless."
 	      echo "*** \`nm' from GNU binutils and a full rebuild may help."

 	    fi
 	    if test "$build_old_libs" = no; then
 	      oldlibs="$output_objdir/$libname.$libext"
 	      build_libtool_libs=module
 	      build_old_libs=yes
 	    else
 	      build_libtool_libs=no
 	    fi
 	  else

 	    echo "*** The inter-library dependencies that have been dropped here will be"
 	    echo "*** automatically added whenever a program is linked with this library"
 	    echo "*** or is declared to -dlopen it."

 
 	    if test "$allow_undefined" = no; then

 	      echo
 	      echo "*** Since this library must not contain undefined symbols,"
 	      echo "*** because either the platform does not support them or"
 	      echo "*** it was explicitly requested with -no-undefined,"
 	      echo "*** libtool will only create a static version of it."

 	      if test "$build_old_libs" = no; then
 		oldlibs="$output_objdir/$libname.$libext"
 		build_libtool_libs=module
 		build_old_libs=yes
 	      else
 		build_libtool_libs=no
 	      fi
 	    fi
 	  fi
 	fi
 	# Done checking deplibs!
 	deplibs=$newdeplibs
       fi

       # Time to change all our "foo.ltframework" stuff back to "-framework foo"
       case $host in
 	*-*-darwin*)

 	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
 	  new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
 	  deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`

 	  ;;
       esac

 
       # move library search paths that coincide with paths to not yet
       # installed libraries to the beginning of the library search list
       new_libs=
       for path in $notinst_path; do
 	case " $new_libs " in
 	*" -L$path/$objdir "*) ;;
 	*)
 	  case " $deplibs " in
 	  *" -L$path/$objdir "*)

 	    func_append new_libs " -L$path/$objdir" ;;

 	  esac
 	  ;;
 	esac
       done
       for deplib in $deplibs; do
 	case $deplib in
 	-L*)
 	  case " $new_libs " in
 	  *" $deplib "*) ;;

 	  *) func_append new_libs " $deplib" ;;

 	  esac
 	  ;;

 	*) func_append new_libs " $deplib" ;;

 	esac
       done
       deplibs="$new_libs"
 
       # All the library-specific variables (install_libdir is set above).
       library_names=
       old_library=
       dlname=
 
       # Test again, we may have decided not to build it any more
       if test "$build_libtool_libs" = yes; then

 	# Remove ${wl} instances when linking with ld.
 	# FIXME: should test the right _cmds variable.
 	case $archive_cmds in
 	  *\$LD\ *) wl= ;;
         esac

 	if test "$hardcode_into_libs" = yes; then
 	  # Hardcode the library paths
 	  hardcode_libdirs=
 	  dep_rpath=
 	  rpath="$finalize_rpath"

 	  test "$opt_mode" != relink && rpath="$compile_rpath$rpath"

 	  for libdir in $rpath; do
 	    if test -n "$hardcode_libdir_flag_spec"; then
 	      if test -n "$hardcode_libdir_separator"; then

 		func_replace_sysroot "$libdir"
 		libdir=$func_replace_sysroot_result

 		if test -z "$hardcode_libdirs"; then
 		  hardcode_libdirs="$libdir"
 		else
 		  # Just accumulate the unique libdirs.
 		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
 		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
 		    ;;
 		  *)

 		    func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"

 		    ;;
 		  esac
 		fi
 	      else
 		eval flag=\"$hardcode_libdir_flag_spec\"

 		func_append dep_rpath " $flag"

 	      fi
 	    elif test -n "$runpath_var"; then
 	      case "$perm_rpath " in
 	      *" $libdir "*) ;;

 	      *) func_append perm_rpath " $libdir" ;;

 	      esac
 	    fi
 	  done
 	  # Substitute the hardcoded libdirs into the rpath.
 	  if test -n "$hardcode_libdir_separator" &&
 	     test -n "$hardcode_libdirs"; then
 	    libdir="$hardcode_libdirs"

 	    eval "dep_rpath=\"$hardcode_libdir_flag_spec\""

 	  fi
 	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
 	    # We should set the runpath_var.
 	    rpath=
 	    for dir in $perm_rpath; do

 	      func_append rpath "$dir:"

 	    done
 	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
 	  fi
 	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
 	fi
 
 	shlibpath="$finalize_shlibpath"

 	test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"

 	if test -n "$shlibpath"; then
 	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
 	fi
 
 	# Get the real and link names of the library.
 	eval shared_ext=\"$shrext_cmds\"
 	eval library_names=\"$library_names_spec\"
 	set dummy $library_names

 	shift
 	realname="$1"
 	shift

 
 	if test -n "$soname_spec"; then
 	  eval soname=\"$soname_spec\"
 	else
 	  soname="$realname"
 	fi
 	if test -z "$dlname"; then
 	  dlname=$soname
 	fi
 
 	lib="$output_objdir/$realname"
 	linknames=
 	for link
 	do

 	  func_append linknames " $link"

 	done
 
 	# Use standard objects if they are pic

 	test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`

 	test "X$libobjs" = "X " && libobjs=
 
 	delfiles=
 	if test -n "$export_symbols" && test -n "$include_expsyms"; then
 	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
 	  export_symbols="$output_objdir/$libname.uexp"