28e73e95 |
## |
9ed581f8 |
## Example config file for the Clam AV daemon |
b2d28e76 |
## Please read the clamd.conf(5) manual before editing this file. |
28e73e95 |
## |
96b02502 |
|
28e73e95 |
# Comment or remove the line below.
Example
# Uncomment this option to enable logging. |
c6dbfbcb |
# LogFile must be writable for the user running daemon.
# A full path is required.
# Default: disabled |
28e73e95 |
#LogFile /tmp/clamd.log
# By default the log file is locked for writing - the lock protects against
# running clamd multiple times (if want to run another clamd, please
# copy the configuration file, change the LogFile variable, and run |
c6dbfbcb |
# the daemon with --config-file option).
# This option disables log file locking. |
81837459 |
# Default: no
#LogFileUnlock yes |
28e73e95 |
|
f3a638e4 |
# Maximum size of the log file. |
28e73e95 |
# Value of 0 disables the limit.
# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes). To specify the size |
e1c3ee76 |
# in bytes just don't use modifiers. If LogFileMaxSize is enabled, log
# rotation (the LogRotate option) will always be enabled. |
c6dbfbcb |
# Default: 1M |
28e73e95 |
#LogFileMaxSize 2M
|
c6dbfbcb |
# Log time with each message. |
81837459 |
# Default: no
#LogTime yes |
28e73e95 |
|
c6dbfbcb |
# Also log clean files. Useful in debugging but drastically increases the
# log size. |
81837459 |
# Default: no
#LogClean yes |
ee039e40 |
|
28e73e95 |
# Use system logger (can work together with LogFile). |
81837459 |
# Default: no
#LogSyslog yes |
28e73e95 |
|
c695dab4 |
# Specify the type of syslog messages - please refer to 'man syslog' |
c6dbfbcb |
# for facility names.
# Default: LOG_LOCAL6 |
c695dab4 |
#LogFacility LOG_MAIL
|
28e73e95 |
# Enable verbose logging. |
81837459 |
# Default: no
#LogVerbose yes |
28e73e95 |
|
e1c3ee76 |
# Enable log rotation. Always enabled when LogFileMaxSize is enabled. |
42ccf9c2 |
# Default: no
#LogRotate yes
|
3507891f |
# Log additional information about the infected file, such as its
# size and hash, together with the virus name. |
edbba730 |
#ExtendedDetectionInfo yes
|
c6dbfbcb |
# This option allows you to save a process identifier of the listening |
28e73e95 |
# daemon (main thread). |
c6dbfbcb |
# Default: disabled |
28e73e95 |
#PidFile /var/run/clamd.pid
|
ee039e40 |
# Optional path to the global temporary directory. |
c6dbfbcb |
# Default: system specific (usually /tmp or /var/tmp). |
ee039e40 |
#TemporaryDirectory /var/tmp
|
95d401c4 |
# Path to the database directory. |
c6dbfbcb |
# Default: hardcoded (depends on installation options) |
95d401c4 |
#DatabaseDirectory /var/lib/clamav |
96b02502 |
|
208ceae5 |
# Only load the official signatures published by the ClamAV project.
# Default: no
#OfficialDatabaseOnly no
|
bb564f55 |
# The daemon can work in local mode, network mode or both.
# Due to security reasons we recommend the local mode. |
28e73e95 |
|
c6dbfbcb |
# Path to a local socket file the daemon will listen on. |
81837459 |
# Default: disabled (must be specified by a user) |
e8f6878c |
#LocalSocket /tmp/clamd.socket
# Sets the group ownership on the unix socket.
# Default: disabled (the primary group of the user running clamd)
#LocalSocketGroup virusgroup
# Sets the permissions on the unix socket to the specified mode.
# Default: disabled (socket is world accessible)
#LocalSocketMode 660 |
28e73e95 |
|
049a18b9 |
# Remove stale socket after unclean shutdown. |
e6fe106e |
# Default: yes |
81837459 |
#FixStaleSocket yes |
8139fd99 |
|
5def21ff |
# TCP port address. |
81837459 |
# Default: no |
5def21ff |
#TCPSocket 3310
|
8139fd99 |
# TCP address.
# By default we bind to INADDR_ANY, probably not wise. |
78ca83b0 |
# Enable the following to provide some degree of protection |
3da70ca0 |
# from the outside world. This option can be specified multiple
# times if you want to listen on multiple IPs. IPv6 is now supported. |
81837459 |
# Default: no |
8139fd99 |
#TCPAddr 127.0.0.1 |
049a18b9 |
|
28e73e95 |
# Maximum length the queue of pending connections may grow to. |
b907e8cf |
# Default: 200 |
28e73e95 |
#MaxConnectionQueueLength 30
|
29c4d783 |
# Clamd uses FTP-like protocol to receive data from remote clients.
# If you are using clamav-milter to balance load between remote clamd daemons
# on firewall servers you may need to tune the options below.
# Close the connection when the data size limit is exceeded. |
f3a638e4 |
# The value should match your MTA's limit for a maximum attachment size. |
745960b0 |
# Default: 25M
#StreamMaxLength 10M |
28e73e95 |
|
29c4d783 |
# Limit port range.
# Default: 1024
#StreamMinPort 30000 |
6c7dbf7d |
# Default: 2048 |
29c4d783 |
#StreamMaxPort 32000
|
f3a638e4 |
# Maximum number of threads running at the same time. |
c6dbfbcb |
# Default: 10
#MaxThreads 20 |
28e73e95 |
|
7390dfcd |
# Waiting for data from a client socket will timeout after this time (seconds). |
c6dbfbcb |
# Default: 120 |
7390dfcd |
#ReadTimeout 300 |
28e73e95 |
|
7d444fd9 |
# This option specifies the time (in seconds) after which clamd should
# timeout if a client doesn't provide any initial command after connecting.
# Default: 5
#CommandReadTimeout 5
# This option specifies how long to wait (in miliseconds) if the send buffer is full.
# Keep this value low to prevent clamd hanging
#
# Default: 500
#SendBufTimeout 200
# Maximum number of queued items (including those being processed by MaxThreads threads)
# It is recommended to have this value at least twice MaxThreads if possible.
# WARNING: you shouldn't increase this too much to avoid running out of file descriptors,
# the following condition should hold: |
da3e0e40 |
# MaxThreads*MaxRecursion + (MaxQueue - MaxThreads) + 6< RLIMIT_NOFILE (usual max is 1024) |
7d444fd9 |
#
# Default: 100
#MaxQueue 200
|
02b4b0c7 |
# Waiting for a new job will timeout after this time (seconds).
# Default: 30
#IdleTimeout 60
|
f45d19ac |
# Don't scan files and directories matching regex
# This directive can be used multiple times
# Default: scan all
#ExcludePath ^/proc/
#ExcludePath ^/sys/
|
f3a638e4 |
# Maximum depth directories are scanned at. |
c6dbfbcb |
# Default: 15
#MaxDirectoryRecursion 20 |
28e73e95 |
|
c6dbfbcb |
# Follow directory symlinks. |
81837459 |
# Default: no
#FollowDirectorySymlinks yes |
28e73e95 |
# Follow regular file symlinks. |
81837459 |
# Default: no
#FollowFileSymlinks yes |
28e73e95 |
|
2086dc5c |
# Scan files and directories on other filesystems.
# Default: yes
#CrossFilesystems yes
|
f3a638e4 |
# Perform a database check. |
7d444fd9 |
# Default: 600 (10 min) |
28e73e95 |
#SelfCheck 600
|
c6dbfbcb |
# Execute a command when virus is found. In the command string %v will |
f3a638e4 |
# be replaced with the virus name. |
81837459 |
# Default: no |
9cb8aa62 |
#VirusEvent /usr/local/bin/send_sms 123456789 "VIRUS ALERT: %v" |
0249f9d2 |
|
f6e4ba63 |
# Run as another user (clamd must be started by root for this option to work) |
81837459 |
# Default: don't drop privileges |
28e73e95 |
#User clamav
|
c6dbfbcb |
# Initialize supplementary group access (clamd must be started by root). |
81837459 |
# Default: no
#AllowSupplementaryGroups no |
28e73e95 |
|
cec8f31f |
# Stop daemon when libclamav reports out of memory condition. |
81837459 |
#ExitOnOOM yes |
f9593781 |
|
c6dbfbcb |
# Don't fork into background. |
81837459 |
# Default: no
#Foreground yes |
28e73e95 |
|
0249f9d2 |
# Enable debug messages in libclamav. |
81837459 |
# Default: no
#Debug yes |
0249f9d2 |
|
590135f9 |
# Do not remove temporary files (for debug purposes). |
81837459 |
# Default: no
#LeaveTemporaryFiles yes |
c6dbfbcb |
|
23816d69 |
# Permit use of the ALLMATCHSCAN command. If set to no, clamd will reject
# any ALLMATCHSCAN command as invalid.
# Default: yes
#AllowAllMatchScan no
|
70edb085 |
# Detect Possibly Unwanted Applications.
# Default: no
#DetectPUA yes
|
4439627c |
# Exclude a specific PUA category. This directive can be used multiple times. |
68de67e1 |
# See https://github.com/vrtadmin/clamav-faq/blob/master/faq/faq-pua.md for
# the complete list of PUA categories. |
4439627c |
# Default: Load all categories (if DetectPUA is activated)
#ExcludePUA NetTool
#ExcludePUA PWTool
# Only include a specific PUA category. This directive can be used multiple
# times.
# Default: Load all categories (if DetectPUA is activated)
#IncludePUA Spy
#IncludePUA Scanner
#IncludePUA RAT
|
1b661cef |
# In some cases (eg. complex malware, exploits in graphic files, and others),
# ClamAV uses special algorithms to provide accurate detection. This option
# controls the algorithmic detection.
# Default: yes |
47138a98 |
#AlgorithmicDetection yes |
1b661cef |
|
3cab931d |
# This option causes memory or nested map scans to dump the content to disk.
# If you turn on this option, more data is written to disk and is available
# when the LeaveTemporaryFiles option is enabled.
#ForceToDisk yes |
0518e6c1 |
|
34e9acb0 |
# This option allows you to disable the caching feature of the engine. By
# default, the engine will store an MD5 in a cache of any files that are
# not flagged as virus or that hit limits checks. Disabling the cache will
# have a negative performance impact on large scans.
# Default: no
#DisableCache yes
|
a9082ea2 |
##
## Executable files
##
# PE stands for Portable Executable - it's an executable file format used |
f3a638e4 |
# in all 32 and 64-bit versions of Windows operating systems. This option allows |
a9082ea2 |
# ClamAV to perform a deeper analysis of executable files and it's also |
c6dbfbcb |
# required for decompression of popular executable packers such as UPX, FSG, |
ac090cf5 |
# and Petite. If you turn off this option, the original files will still be
# scanned, but without additional processing. |
81837459 |
# Default: yes
#ScanPE yes |
a9082ea2 |
|
5cc4cb86 |
# Certain PE files contain an authenticode signature. By default, we check
# the signature chain in the PE file against a database of trusted and
# revoked certificates if the file being scanned is marked as a virus.
# If any certificate in the chain validates against any trusted root, but
# does not match any revoked certificate, the file is marked as whitelisted.
# If the file does match a revoked certificate, the file is marked as virus.
# The following setting completely turns off authenticode verification.
# Default: no
#DisableCertCheck yes
|
3f97a1e7 |
# Executable and Linking Format is a standard format for UN*X executables.
# This option allows you to control the scanning of ELF files. |
ac090cf5 |
# If you turn off this option, the original files will still be scanned, but
# without additional processing. |
3f97a1e7 |
# Default: yes
#ScanELF yes
# With this option clamav will try to detect broken executables (both PE and
# ELF) and mark them as Broken.Executable. |
81837459 |
# Default: no
#DetectBrokenExecutables yes |
20c3d44d |
|
28e73e95 |
## |
a9082ea2 |
## Documents |
47bbbc56 |
##
|
f3a638e4 |
# This option enables scanning of OLE2 files, such as Microsoft Office
# documents and .msi files. |
ac090cf5 |
# If you turn off this option, the original files will still be scanned, but
# without additional processing. |
81837459 |
# Default: yes
#ScanOLE2 yes |
47bbbc56 |
|
6bee45b3 |
# With this option enabled OLE2 files with VBA macros, which were not
# detected by signatures will be marked as "Heuristics.OLE2.ContainsMacros".
# Default: no
#OLE2BlockMacros no
|
c5107e70 |
# This option enables scanning within PDF files. |
ac090cf5 |
# If you turn off this option, the original files will still be scanned, but
# without decoding and additional processing. |
e8637858 |
# Default: yes |
c5107e70 |
#ScanPDF yes
|
1e41fdba |
# This option enables scanning within SWF files.
# If you turn off this option, the original files will still be scanned, but
# without decoding and additional processing.
# Default: yes
#ScanSWF yes
|
0518e6c1 |
|
47bbbc56 |
## |
a9082ea2 |
## Mail files |
28e73e95 |
##
|
a36e6e5c |
# Enable internal e-mail scanner. |
ac090cf5 |
# If you turn off this option, the original files will still be scanned, but
# without parsing individual messages/attachments. |
81837459 |
# Default: yes
#ScanMail yes |
a36e6e5c |
|
4270f93b |
# Scan RFC1341 messages split over many emails.
# You will need to periodically clean up $TemporaryDirectory/clamav-partial directory.
# WARNING: This option may open your system to a DoS attack.
# Never use it on loaded servers.
# Default: no
#ScanPartialMessages yes
|
af7d0dde |
# With this option enabled ClamAV will try to detect phishing attempts by using
# signatures. |
d6449522 |
# Default: yes |
af7d0dde |
#PhishingSignatures yes |
28e73e95 |
|
3fced6f7 |
# Scan URLs found in mails for phishing attempts using heuristics. |
88cf728e |
# Default: yes |
961cc653 |
#PhishingScanURLs yes |
88cf728e |
|
19b3e182 |
# Always block SSL mismatches in URLs, even if the URL isn't in the database.
# This can lead to false positives.
#
# Default: no
#PhishingAlwaysBlockSSLMismatch no
# Always block cloaked URLs, even if URL isn't in database. |
f3a638e4 |
# This can lead to false positives. |
19b3e182 |
#
# Default: no
#PhishingAlwaysBlockCloak no
|
e33d8379 |
# Detect partition intersections in raw disk images using heuristics.
# Default: no
#PartitionIntersection no
|
7f0d1148 |
# Allow heuristic match to take precedence.
# When enabled, if a heuristic scan (such as phishingScan) detects
# a possible virus/phish it will stop scan immediately. Recommended, saves CPU
# scan-time.
# When disabled, virus/phish detected by heuristic scans will be reported only at
# the end of a scan. If an archive contains both a heuristically detected
# virus/phish, and a real malware, the real malware will be reported
#
# Keep this disabled if you intend to handle "*.Heuristics.*" viruses
# differently from "real" malware.
# If a non-heuristically-detected virus (signature-based) is found first,
# the scan is interrupted immediately, regardless of this config option.
#
# Default: no
#HeuristicScanPrecedence yes |
0518e6c1 |
|
2680e1c3 |
|
28e73e95 |
## |
26fbf6bd |
## Data Loss Prevention (DLP)
##
# Enable the DLP module
# Default: No
#StructuredDataDetection yes
# This option sets the lowest number of Credit Card numbers found in a file
# to generate a detect. |
57e1a05e |
# Default: 3 |
26fbf6bd |
#StructuredMinCreditCardCount 5
# This option sets the lowest number of Social Security Numbers found
# in a file to generate a detect. |
57e1a05e |
# Default: 3 |
26fbf6bd |
#StructuredMinSSNCount 5
# With this option enabled the DLP module will search for valid
# SSNs formatted as xxx-yy-zzzz
# Default: yes
#StructuredSSNFormatNormal yes
# With this option enabled the DLP module will search for valid
# SSNs formatted as xxxyyzzzz |
3f9918e1 |
# Default: no |
26fbf6bd |
#StructuredSSNFormatStripped yes
## |
a9082ea2 |
## HTML |
888f5794 |
##
|
c6dbfbcb |
# Perform HTML normalisation and decryption of MS Script Encoder code. |
81837459 |
# Default: yes |
ac090cf5 |
# If you turn off this option, the original files will still be scanned, but
# without additional processing. |
81837459 |
#ScanHTML yes |
888f5794 |
|
a36e6e5c |
|
888f5794 |
## |
a9082ea2 |
## Archives |
28e73e95 |
##
|
c6dbfbcb |
# ClamAV can scan within archives and compressed files. |
ac090cf5 |
# If you turn off this option, the original files will still be scanned, but
# without unpacking and additional processing. |
81837459 |
# Default: yes
#ScanArchive yes |
88ab7aee |
|
4fd3c044 |
# Mark encrypted archives as viruses (Encrypted.Zip, Encrypted.RAR).
# Default: no
#ArchiveBlockEncrypted no
##
## Limits
##
|
c6dbfbcb |
# The options below protect your system against Denial of Service attacks
# using archive bombs. |
28e73e95 |
|
a5d91be7 |
# This option sets the maximum amount of data to be scanned for each input file.
# Archives and other containers are recursively extracted and scanned up to this
# value.
# Value of 0 disables the limit
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 100M |
2cc53b50 |
#MaxScanSize 150M |
281c7642 |
|
4fd3c044 |
# Files larger than this limit won't be scanned. Affects the input file itself
# as well as files contained inside it (when the input file is an archive, a
# document or some other kind of container). |
28e73e95 |
# Value of 0 disables the limit. |
a5d91be7 |
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 25M |
2cc53b50 |
#MaxFileSize 30M |
c6dbfbcb |
# Nested archives are scanned recursively, e.g. if a Zip archive contains a RAR
# file, all files within it will also be scanned. This options specifies how |
f3a638e4 |
# deeply the process should be continued. |
81c1e5f5 |
# Note: setting this limit too high may result in severe damage to the system. |
a5d91be7 |
# Default: 16 |
281c7642 |
#MaxRecursion 10 |
28e73e95 |
|
4fd3c044 |
# Number of files to be scanned within an archive, a document, or any other
# container file. |
28e73e95 |
# Value of 0 disables the limit. |
a5d91be7 |
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 10000 |
2cc53b50 |
#MaxFiles 15000 |
a6945b5d |
|
b2726a53 |
# Maximum size of a file to check for embedded PE. Files larger than this value
# will skip the additional analysis step.
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 10M
#MaxEmbeddedPE 10M
# Maximum size of a HTML file to normalize. HTML files larger than this value
# will not be normalized or scanned.
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 10M
#MaxHTMLNormalize 10M
# Maximum size of a normalized HTML file to scan. HTML files larger than this
# value after normalization will not be scanned.
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 2M
#MaxHTMLNoTags 2M
# Maximum size of a script file to normalize. Script content larger than this
# value will not be normalized or scanned.
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 5M
#MaxScriptNormalize 5M
# Maximum size of a ZIP file to reanalyze type recognition. ZIP files larger
# than this value will skip the step to potentially reanalyze as PE.
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 1M
#MaxZipTypeRcg 1M
|
4b5895b8 |
# This option sets the maximum number of partitions of a raw disk image to be scanned.
# Raw disk images with more partitions than this value will have up to the value number
# partitions scanned. Negative values are not allowed.
# Note: setting this limit too high may result in severe damage or impact performance.
# Default: 50
#MaxPartitions 128 |
0f34221a |
|
067bce5f |
# This option sets the maximum number of icons within a PE to be scanned.
# PE files with more icons than this value will have up to the value number icons scanned.
# Negative values are not allowed.
# WARNING: setting this limit too high may result in severe damage or impact performance.
# Default: 100
#MaxIconsPE 200
|
050f1036 |
# This option sets the maximum calls to the PCRE match function during an instance of regex matching.
# Instances using more than this limit will be terminated and alert the user but the scan will continue.
# For more information on match_limit, see the PCRE documentation.
# Negative values are not allowed.
# WARNING: setting this limit too high may severely impact performance.
# Default: 10000
#PCREMatchLimit 20000
# This option sets the maximum recursive calls to the PCRE match function during an instance of regex matching.
# Instances using more than this limit will be terminated and alert the user but the scan will continue.
# For more information on match_limit_recursion, see the PCRE documentation.
# Negative values are not allowed and values > PCREMatchLimit are superfluous.
# WARNING: setting this limit too high may severely impact performance.
# Default: 5000
#PCRERecMatchLimit 10000
# This option sets the maximum filesize for which PCRE subsigs will be executed.
# Files exceeding this limit will not have PCRE subsigs executed unless a subsig is encompassed to a smaller buffer.
# Negative values are not allowed.
# Setting this value to zero disables the limit.
# WARNING: setting this limit too high or disabling it may severely impact performance.
# Default: 25M
#PCREMaxFileSize 100M
|
28e73e95 |
## |
2680e1c3 |
## On-access Scan Settings |
28e73e95 |
##
|
2680e1c3 |
# Enable on-access scanning. Currently, this is supported via fanotify.
# Clamuko/Dazuko support has been deprecated. |
81837459 |
# Default: no |
2680e1c3 |
#ScanOnAccess yes |
28e73e95 |
|
2217edf5 |
# Set the mount point to be scanned. The mount point specified, or the mount point
# containing the specified directory will be watched. If any directories are specified,
# this option will preempt the DDD system. This will notify only. It can be used multiple times.
# (On-access scan only)
# Default: disabled
#OnAccessMountPath /
#OnAccessMountPath /home/user
|
2680e1c3 |
# Don't scan files larger than OnAccessMaxFileSize |
adc16eb5 |
# Value of 0 disables the limit.
# Default: 5M |
2680e1c3 |
#OnAccessMaxFileSize 10M |
28e73e95 |
|
f3a638e4 |
# Set the include paths (all files inside them will be scanned). You can have |
2680e1c3 |
# multiple OnAccessIncludePath directives but each directory must be added
# in a separate line. (On-access scan only) |
c6dbfbcb |
# Default: disabled |
2680e1c3 |
#OnAccessIncludePath /home
#OnAccessIncludePath /students |
28e73e95 |
|
2680e1c3 |
# Set the exclude paths. All subdirectories are also excluded.
# (On-access scan only) |
c6dbfbcb |
# Default: disabled |
2680e1c3 |
#OnAccessExcludePath /home/bofh |
be43f951 |
|
bc3b9efc |
# With this option you can whitelist specific UIDs. Processes with these UIDs
# will be able to access all files.
# This option can be used multiple times (one per line).
# Default: disabled |
2680e1c3 |
#OnAccessExcludeUID 0
|
4a1bd5c8 |
# Toggles dynamic directory determination. Allows for recursively watching include paths.
# (On-access scan only)
# Default: no
#OnAccessDisableDDD yes
|
f408e5b2 |
# Modifies fanotify blocking behaviour when handling permission events.
# If turned on, fanotify will only notify if the file scanned is a virus,
# and not perform any blocking. |
bbb244d9 |
# (On-access scan only) |
f408e5b2 |
# Default: no
#OnAccessNotifyOnly yes |
2680e1c3 |
##
## Bytecode
## |
bc3b9efc |
|
3eba8ddc |
# With this option enabled ClamAV will load bytecode from the database.
# It is highly recommended you keep this option on, otherwise you'll miss detections for many new viruses.
# Default: yes
#Bytecode yes
|
be43f951 |
# Set bytecode security level.
# Possible values:
# None - no security at all, meant for debugging. DO NOT USE THIS ON PRODUCTION SYSTEMS |
606fd6d0 |
# This value is only available if clamav was built with --enable-debug! |
be43f951 |
# TrustSigned - trust bytecode loaded from signed .c[lv]d files,
# insert runtime safety checks for bytecode loaded from other sources
# Paranoid - don't trust any bytecode, insert runtime checks for all
# Recommended: TrustSigned, because bytecode in .cvd files already has these checks |
9c92344b |
# Note that by default only signed bytecode is loaded, currently you can only
# load unsigned bytecode in --enable-debug mode. |
be43f951 |
#
# Default: TrustSigned
#BytecodeSecurity TrustSigned |
b63681a5 |
|
bdd9aeae |
# Set bytecode timeout in miliseconds. |
b63681a5 |
# |
c19477ec |
# Default: 5000
# BytecodeTimeout 1000 |
2e10c4d7 |
##
## Statistics gathering and submitting
##
# Enable statistical reporting.
# Default: no
#StatsEnabled yes
# Disable submission of individual PE sections for files flagged as malware.
# Default: no
#StatsPEDisabled yes
# HostID in the form of an UUID to use when submitting statistical information.
# Default: auto
#StatsHostID auto
# Time in seconds to wait for the stats server to come back with a response
# Default: 10
#StatsTimeout 10 |