# Generated from ltmain.m4sh.
 
 # ltmain.sh (GNU libtool) 2.2.6
 # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
 # This is free software; see the source for copying conditions.  There is NO
 # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
 # GNU Libtool is free software; you can redistribute it and/or modify

 # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 2 of the License, or
 # (at your option) any later version.
 #

 # As a special exception to the GNU General Public License,
 # if you distribute this file as part of a program or library that
 # is built using GNU Libtool, you may include this file under the
 # same distribution terms that you use for the rest of that program.
 #
 # GNU Libtool is distributed in the hope that it will be useful, but

 # WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 # General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License

 # along with GNU Libtool; see the file COPYING.  If not, a copy
 # can be downloaded from http://www.gnu.org/licenses/gpl.html,
 # or obtained by writing to the Free Software Foundation, Inc.,
 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

 # Usage: $progname [OPTION]... [MODE-ARG]...
 #
 # Provide generalized library-building support services.
 #
 #     --config             show all configuration variables
 #     --debug              enable verbose shell tracing
 # -n, --dry-run            display commands without modifying any files
 #     --features           display basic configuration information and exit
 #     --mode=MODE          use operation mode MODE
 #     --preserve-dup-deps  don't remove duplicate dependency libraries
 #     --quiet, --silent    don't print informational messages
 #     --tag=TAG            use configuration variables from tag TAG
 # -v, --verbose            print informational messages (default)
 #     --version            print version information
 # -h, --help               print short or long help message
 #
 # MODE must be one of the following:
 #
 #       clean              remove files from the build directory
 #       compile            compile a source file into a libtool object
 #       execute            automatically set library path, then run a program
 #       finish             complete the installation of libtool libraries
 #       install            install libraries or executables
 #       link               create a library or an executable
 #       uninstall          remove libraries from an installed directory
 #
 # MODE-ARGS vary depending on the MODE.
 # Try `$progname --help --mode=MODE' for a more detailed description of MODE.
 #
 # When reporting a bug, please describe a test case to reproduce it and
 # include the following information:
 #
 #       host-triplet:	$host
 #       shell:		$SHELL
 #       compiler:		$LTCC
 #       compiler flags:		$LTCFLAGS
 #       linker:		$LD (gnu? $with_gnu_ld)

 #       $progname:		(GNU libtool) 2.2.6 Debian-2.2.6a-4

 #       automake:		$automake_version
 #       autoconf:		$autoconf_version
 #
 # Report bugs to <bug-libtool@gnu.org>.

 
 PROGRAM=ltmain.sh
 PACKAGE=libtool

 VERSION="2.2.6 Debian-2.2.6a-4"

 TIMESTAMP=""
 package_revision=1.3012

 # Be Bourne compatible

 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
   # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'

   setopt NO_GLOB_SUBST

 else
   case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac

 fi

 BIN_SH=xpg4; export BIN_SH # for Tru64
 DUALCASE=1; export DUALCASE # for MKS sh

 # NLS nuisances: We save the old values to restore during execute mode.

 # Only set LANG and LC_ALL to C if already set.
 # These must not be set unconditionally because not all systems understand
 # e.g. LANG=C (notably SCO).

 lt_user_locale=
 lt_safe_locale=

 for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES

 do
   eval "if test \"\${$lt_var+set}\" = set; then

           save_$lt_var=\$$lt_var
           $lt_var=C

 	  export $lt_var

 	  lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
 	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"

 	fi"
 done

 $lt_unset CDPATH
 
 
 
 
 
 : ${CP="cp -f"}
 : ${ECHO="echo"}

 : ${EGREP="/bin/grep -E"}
 : ${FGREP="/bin/grep -F"}
 : ${GREP="/bin/grep"}

 : ${LN_S="ln -s"}
 : ${MAKE="make"}
 : ${MKDIR="mkdir"}
 : ${MV="mv -f"}
 : ${RM="rm -f"}

 : ${SED="/bin/sed"}

 : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
 : ${Xsed="$SED -e 1s/^X//"}
 
 # Global variables:
 EXIT_SUCCESS=0
 EXIT_FAILURE=1
 EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
 EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
 
 exit_status=$EXIT_SUCCESS

 # Make sure IFS has a sensible default
 lt_nl='
 '
 IFS=" 	$lt_nl"
 

 dirname="s,/[^/]*$,,"
 basename="s,^.*/,,"
 
 # func_dirname_and_basename file append nondir_replacement
 # perform func_basename and func_dirname in a single function
 # call:
 #   dirname:  Compute the dirname of FILE.  If nonempty,
 #             add APPEND to the result, otherwise set result
 #             to NONDIR_REPLACEMENT.
 #             value returned in "$func_dirname_result"
 #   basename: Compute filename of FILE.
 #             value retuned in "$func_basename_result"
 # Implementation must be kept synchronized with func_dirname
 # and func_basename. For efficiency, we do not delegate to
 # those functions but instead duplicate the functionality here.
 func_dirname_and_basename ()
 {
   # Extract subdirectory from the argument.
   func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
   if test "X$func_dirname_result" = "X${1}"; then
     func_dirname_result="${3}"
   else
     func_dirname_result="$func_dirname_result${2}"
   fi
   func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
 }

 # Generated shell functions inserted here.
 
 # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
 # is ksh but when the shell is invoked as "sh" and the current value of
 # the _XPG environment variable is not equal to 1 (one), the special
 # positional parameter $0, within a function call, is the name of the
 # function.
 progpath="$0"
 
 # The name of this program:
 # In the unlikely event $progname began with a '-', it would play havoc with
 # func_echo (imagine progname=-n), so we prepend ./ in that case:
 func_dirname_and_basename "$progpath"
 progname=$func_basename_result
 case $progname in
   -*) progname=./$progname ;;
 esac
 
 # Make sure we have an absolute path for reexecution:
 case $progpath in
   [\\/]*|[A-Za-z]:\\*) ;;
   *[\\/]*)
      progdir=$func_dirname_result
      progdir=`cd "$progdir" && pwd`
      progpath="$progdir/$progname"
      ;;
   *)
      save_IFS="$IFS"
      IFS=:
      for progdir in $PATH; do
        IFS="$save_IFS"
        test -x "$progdir/$progname" && break
      done
      IFS="$save_IFS"
      test -n "$progdir" || progdir=`pwd`
      progpath="$progdir/$progname"
      ;;
 esac
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
 Xsed="${SED}"' -e 1s/^X//'
 sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
 
 # Same as above, but do not quote variable references.
 double_quote_subst='s/\(["`\\]\)/\\\1/g'
 
 # Re-`\' parameter expansions in output of double_quote_subst that were
 # `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
 # in input to double_quote_subst, that '$' was protected from expansion.
 # Since each input `\' is now two `\'s, look for any number of runs of
 # four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
 bs='\\'
 bs2='\\\\'
 bs4='\\\\\\\\'
 dollar='\$'
 sed_double_backslash="\
   s/$bs4/&\\
 /g
   s/^$bs2$dollar/$bs&/
   s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
   s/\n//g"
 
 # Standard options:
 opt_dry_run=false
 opt_help=false
 opt_quiet=false
 opt_verbose=false
 opt_warning=:
 
 # func_echo arg...
 # Echo program name prefixed message, along with the current mode
 # name if it has been set yet.
 func_echo ()
 {
     $ECHO "$progname${mode+: }$mode: $*"
 }
 
 # func_verbose arg...
 # Echo program name prefixed message in verbose mode only.
 func_verbose ()
 {
     $opt_verbose && func_echo ${1+"$@"}
 
     # A bug in bash halts the script if the last line of a function
     # fails when set -e is in force, so we need another command to
     # work around that:
     :
 }
 
 # func_error arg...
 # Echo program name prefixed message to standard error.
 func_error ()
 {
     $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
 }
 
 # func_warning arg...
 # Echo program name prefixed warning message to standard error.
 func_warning ()
 {
     $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
 
     # bash bug again:
     :
 }
 
 # func_fatal_error arg...
 # Echo program name prefixed message to standard error, and exit.
 func_fatal_error ()
 {
     func_error ${1+"$@"}
     exit $EXIT_FAILURE
 }
 
 # func_fatal_help arg...
 # Echo program name prefixed message to standard error, followed by
 # a help hint, and exit.
 func_fatal_help ()
 {
     func_error ${1+"$@"}
     func_fatal_error "$help"
 }
 help="Try \`$progname --help' for more information."  ## default
 
 
 # func_grep expression filename
 # Check whether EXPRESSION matches any line of FILENAME, without output.
 func_grep ()
 {
     $GREP "$1" "$2" >/dev/null 2>&1
 }
 
 
 # func_mkdir_p directory-path
 # Make sure the entire path to DIRECTORY-PATH is available.
 func_mkdir_p ()
 {
     my_directory_path="$1"
     my_dir_list=
 
     if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
 
       # Protect directory names starting with `-'
       case $my_directory_path in
         -*) my_directory_path="./$my_directory_path" ;;
       esac
 
       # While some portion of DIR does not yet exist...
       while test ! -d "$my_directory_path"; do
         # ...make a list in topmost first order.  Use a colon delimited
 	# list incase some portion of path contains whitespace.
         my_dir_list="$my_directory_path:$my_dir_list"
 
         # If the last portion added has no slash in it, the list is done
         case $my_directory_path in */*) ;; *) break ;; esac
 
         # ...otherwise throw away the child directory and loop
         my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
       done
       my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
 
       save_mkdir_p_IFS="$IFS"; IFS=':'
       for my_dir in $my_dir_list; do
 	IFS="$save_mkdir_p_IFS"
         # mkdir can fail with a `File exist' error if two processes
         # try to create one of the directories concurrently.  Don't
         # stop in that case!
         $MKDIR "$my_dir" 2>/dev/null || :
       done
       IFS="$save_mkdir_p_IFS"
 
       # Bail out if we (or some other process) failed to create a directory.
       test -d "$my_directory_path" || \
         func_fatal_error "Failed to create \`$1'"
     fi
 }

 
 
 # func_mktempdir [string]
 # Make a temporary directory that won't clash with other running
 # libtool processes, and avoids race conditions if possible.  If
 # given, STRING is the basename for that directory.
 func_mktempdir ()
 {
     my_template="${TMPDIR-/tmp}/${1-$progname}"
 

     if test "$opt_dry_run" = ":"; then

       # Return a directory name, but don't create it in dry-run mode
       my_tmpdir="${my_template}-$$"
     else
 
       # If mktemp works, use that first and foremost
       my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
 
       if test ! -d "$my_tmpdir"; then

         # Failing that, at least try and use $RANDOM to avoid a race
         my_tmpdir="${my_template}-${RANDOM-0}$$"

         save_mktempdir_umask=`umask`
         umask 0077
         $MKDIR "$my_tmpdir"
         umask $save_mktempdir_umask

       fi
 
       # If we're not in dry-run mode, bomb out on failure

       test -d "$my_tmpdir" || \
         func_fatal_error "cannot create temporary directory \`$my_tmpdir'"

     fi
 

     $ECHO "X$my_tmpdir" | $Xsed

 }
 
 

 # func_quote_for_eval arg
 # Aesthetically quote ARG to be evaled later.
 # This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
 # is double-quoted, suitable for a subsequent eval, whereas
 # FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
 # which are still active within double quotes backslashified.
 func_quote_for_eval ()

 {

     case $1 in
       *[\\\`\"\$]*)
 	func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
       *)
         func_quote_for_eval_unquoted_result="$1" ;;
     esac
 
     case $func_quote_for_eval_unquoted_result in
       # Double-quote args containing shell metacharacters to delay
       # word splitting, command substitution and and variable
       # expansion for a subsequent eval.
       # Many Bourne shells cannot handle close brackets correctly
       # in scan sets, so we specify it separately.
       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
         func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
         ;;
       *)
         func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"

     esac
 }
 
 

 # func_quote_for_expand arg
 # Aesthetically quote ARG to be evaled later; same as above,
 # but do not quote variable references.
 func_quote_for_expand ()

 {

     case $1 in
       *[\\\`\"]*)
 	my_arg=`$ECHO "X$1" | $Xsed \
 	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;

       *)

         my_arg="$1" ;;
     esac
 
     case $my_arg in
       # Double-quote args containing shell metacharacters to delay
       # word splitting and command substitution for a subsequent eval.
       # Many Bourne shells cannot handle close brackets correctly
       # in scan sets, so we specify it separately.
       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
         my_arg="\"$my_arg\""
         ;;
     esac
 
     func_quote_for_expand_result="$my_arg"

 }
 
 

 # func_show_eval cmd [fail_exp]
 # Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
 # not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
 # is given, then evaluate it.
 func_show_eval ()

 {

     my_cmd="$1"
     my_fail_exp="${2-:}"

     ${opt_silent-false} || {
       func_quote_for_expand "$my_cmd"
       eval "func_echo $func_quote_for_expand_result"
     }
 
     if ${opt_dry_run-false}; then :; else
       eval "$my_cmd"
       my_status=$?
       if test "$my_status" -eq 0; then :; else
 	eval "(exit $my_status); $my_fail_exp"
       fi

     fi
 }
 

 
 # func_show_eval_locale cmd [fail_exp]
 # Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
 # not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
 # is given, then evaluate it.  Use the saved locale for evaluation.
 func_show_eval_locale ()

 {

     my_cmd="$1"
     my_fail_exp="${2-:}"

     ${opt_silent-false} || {
       func_quote_for_expand "$my_cmd"
       eval "func_echo $func_quote_for_expand_result"
     }

     if ${opt_dry_run-false}; then :; else
       eval "$lt_user_locale
 	    $my_cmd"
       my_status=$?
       eval "$lt_safe_locale"
       if test "$my_status" -eq 0; then :; else
 	eval "(exit $my_status); $my_fail_exp"

       fi

     fi

 }
 
 
 

 
 
 # func_version
 # Echo version message to standard output and exit.
 func_version ()
 {
     $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
         s/^# //
 	s/^# *$//
         s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
         p
      }' < "$progpath"
      exit $?
 }
 
 # func_usage
 # Echo short help message to standard output and exit.
 func_usage ()
 {
     $SED -n '/^# Usage:/,/# -h/ {
         s/^# //
 	s/^# *$//
 	s/\$progname/'$progname'/
 	p
     }' < "$progpath"
     $ECHO
     $ECHO "run \`$progname --help | more' for full usage"
     exit $?
 }
 
 # func_help
 # Echo long help message to standard output and exit.
 func_help ()
 {
     $SED -n '/^# Usage:/,/# Report bugs to/ {
         s/^# //
 	s/^# *$//
 	s*\$progname*'$progname'*
 	s*\$host*'"$host"'*
 	s*\$SHELL*'"$SHELL"'*
 	s*\$LTCC*'"$LTCC"'*
 	s*\$LTCFLAGS*'"$LTCFLAGS"'*
 	s*\$LD*'"$LD"'*
 	s/\$with_gnu_ld/'"$with_gnu_ld"'/
 	s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
 	s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
 	p
      }' < "$progpath"
     exit $?
 }
 
 # func_missing_arg argname
 # Echo program name prefixed message to standard error and set global
 # exit_cmd.
 func_missing_arg ()
 {
     func_error "missing argument for $1"
     exit_cmd=exit
 }
 
 exit_cmd=:
 
 
 
 
 
 # Check that we have a working $ECHO.
 if test "X$1" = X--no-reexec; then
   # Discard the --no-reexec flag, and continue.

   shift

 elif test "X$1" = X--fallback-echo; then
   # Avoid inline document here, it may be left over
   :
 elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
   # Yippee, $ECHO works!
   :
 else
   # Restart under the correct shell, and then maybe $ECHO will work.
   exec $SHELL "$progpath" --no-reexec ${1+"$@"}
 fi

 if test "X$1" = X--fallback-echo; then
   # used as fallback echo
   shift
   cat <<EOF
 $*
 EOF
   exit $EXIT_SUCCESS
 fi

 magic="%%%MAGIC variable%%%"
 magic_exe="%%%MAGIC EXE variable%%%"

 # Global variables.
 # $mode is unset
 nonopt=
 execute_dlfiles=
 preserve_args=
 lo2o="s/\\.lo\$/.${objext}/"
 o2lo="s/\\.${objext}\$/.lo/"
 extracted_archives=
 extracted_serial=0

 opt_dry_run=false
 opt_duplicate_deps=false
 opt_silent=false
 opt_debug=:

 # If this variable is set in any of the actions, the command in it
 # will be execed at the end.  This prevents here-documents from being
 # left over by shells.
 exec_cmd=
 
 # func_fatal_configuration arg...
 # Echo program name prefixed message to standard error, followed by
 # a configuration failure hint, and exit.
 func_fatal_configuration ()
 {
     func_error ${1+"$@"}
     func_error "See the $PACKAGE documentation for more information."
     func_fatal_error "Fatal configuration error."
 }

 # func_config
 # Display the configuration for all the tags in this script.
 func_config ()
 {
     re_begincf='^# ### BEGIN LIBTOOL'
     re_endcf='^# ### END LIBTOOL'
 
     # Default configuration.
     $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"

 
     # Now print the configurations for the tags.
     for tagname in $taglist; do

       $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"

     done
 

     exit $?
 }

 # func_features
 # Display the features supported by this script.
 func_features ()
 {
     $ECHO "host: $host"

     if test "$build_libtool_libs" = yes; then

       $ECHO "enable shared libraries"

     else

       $ECHO "disable shared libraries"

     fi
     if test "$build_old_libs" = yes; then

       $ECHO "enable static libraries"

     else

       $ECHO "disable static libraries"

     fi

     exit $?

 }

 # func_enable_tag tagname
 # Verify that TAGNAME is valid, and either flag an error and exit, or
 # enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
 # variable here.
 func_enable_tag ()
 {
   # Global variable:
   tagname="$1"

   re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
   re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
   sed_extractcf="/$re_begincf/,/$re_endcf/p"

   # Validate tagname.
   case $tagname in
     *[!-_A-Za-z0-9,/]*)
       func_fatal_error "invalid tag name: $tagname"
       ;;
   esac

   # Don't test for the "default" C tag, as we know it's
   # there but not specially marked.
   case $tagname in
     CC) ;;
     *)
       if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
 	taglist="$taglist $tagname"
 
 	# Evaluate the configuration.  Be careful to quote the path
 	# and the sed script, to avoid splitting on whitespace, but
 	# also don't use non-portable quotes within backquotes within
 	# quotes we have to do it in 2 steps:
 	extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
 	eval "$extractedcf"
       else
 	func_error "ignoring unknown tag $tagname"
       fi
       ;;
   esac
 }

 # Parse options once, thoroughly.  This comes as soon as possible in
 # the script to make things like `libtool --version' happen quickly.
 {
 
   # Shorthand for --mode=foo, only valid as the first argument
   case $1 in
   clean|clea|cle|cl)
     shift; set dummy --mode clean ${1+"$@"}; shift

     ;;

   compile|compil|compi|comp|com|co|c)
     shift; set dummy --mode compile ${1+"$@"}; shift

     ;;

   execute|execut|execu|exec|exe|ex|e)
     shift; set dummy --mode execute ${1+"$@"}; shift

     ;;

   finish|finis|fini|fin|fi|f)
     shift; set dummy --mode finish ${1+"$@"}; shift

     ;;

   install|instal|insta|inst|ins|in|i)
     shift; set dummy --mode install ${1+"$@"}; shift
     ;;
   link|lin|li|l)
     shift; set dummy --mode link ${1+"$@"}; shift
     ;;
   uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
     shift; set dummy --mode uninstall ${1+"$@"}; shift

     ;;
   esac
 

   # Parse non-mode specific arguments:
   while test "$#" -gt 0; do
     opt="$1"
     shift

     case $opt in
       --config)		func_config					;;

       --debug)		preserve_args="$preserve_args $opt"
 			func_echo "enabling shell trace mode"
 			opt_debug='set -x'
 			$opt_debug
 			;;

       -dlopen)		test "$#" -eq 0 && func_missing_arg "$opt" && break
 			execute_dlfiles="$execute_dlfiles $1"
 			shift
 			;;

       --dry-run | -n)	opt_dry_run=:					;;
       --features)       func_features					;;
       --finish)		mode="finish"					;;
 
       --mode)		test "$#" -eq 0 && func_missing_arg "$opt" && break
 			case $1 in
 			  # Valid mode arguments:
 			  clean)	;;
 			  compile)	;;
 			  execute)	;;
 			  finish)	;;
 			  install)	;;
 			  link)		;;
 			  relink)	;;
 			  uninstall)	;;
 
 			  # Catch anything else as an error
 			  *) func_error "invalid argument for $opt"
 			     exit_cmd=exit
 			     break
 			     ;;
 		        esac
 
 			mode="$1"
 			shift
 			;;
 
       --preserve-dup-deps)
 			opt_duplicate_deps=:				;;
 
       --quiet|--silent)	preserve_args="$preserve_args $opt"
 			opt_silent=:
 			;;
 
       --verbose| -v)	preserve_args="$preserve_args $opt"
 			opt_silent=false
 			;;
 
       --tag)		test "$#" -eq 0 && func_missing_arg "$opt" && break
 			preserve_args="$preserve_args $opt $1"
 			func_enable_tag "$1"	# tagname is set here
 			shift
 			;;
 
       # Separate optargs to long options:
       -dlopen=*|--mode=*|--tag=*)
 			func_opt_split "$opt"
 			set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
 			shift
 			;;
 
       -\?|-h)		func_usage					;;
       --help)		opt_help=:					;;
       --version)	func_version					;;
 
       -*)		func_fatal_help "unrecognized option \`$opt'"	;;
 
       *)		nonopt="$opt"
 			break
 			;;
     esac
   done
 
 
   case $host in
     *cygwin* | *mingw* | *pw32* | *cegcc*)
       # don't eliminate duplications in $postdeps and $predeps
       opt_duplicate_compiler_generated_deps=:

       ;;
     *)

       opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
       ;;
   esac

   # Having warned about all mis-specified options, bail out if
   # anything was wrong.
   $exit_cmd $EXIT_FAILURE
 }
 
 # func_check_version_match
 # Ensure that we are using m4 macros, and libtool script from the same
 # release of libtool.
 func_check_version_match ()
 {
   if test "$package_revision" != "$macro_revision"; then
     if test "$VERSION" != "$macro_version"; then
       if test -z "$macro_version"; then
         cat >&2 <<_LT_EOF
 $progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
 $progname: definition of this LT_INIT comes from an older release.
 $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
 $progname: and run autoconf again.
 _LT_EOF
       else
         cat >&2 <<_LT_EOF
 $progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
 $progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
 $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
 $progname: and run autoconf again.
 _LT_EOF

       fi

     else
       cat >&2 <<_LT_EOF
 $progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
 $progname: but the definition of this LT_INIT comes from revision $macro_revision.
 $progname: You should recreate aclocal.m4 with macros from revision $package_revision
 $progname: of $PACKAGE $VERSION and run autoconf again.
 _LT_EOF
     fi
 
     exit $EXIT_MISMATCH
   fi
 }
 
 
 ## ----------- ##
 ##    Main.    ##
 ## ----------- ##
 
 $opt_help || {
   # Sanity checks first:
   func_check_version_match
 
   if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
     func_fatal_configuration "not configured to build any kind of library"

   fi
 

   test -z "$mode" && func_fatal_error "error: you must specify a MODE."
 
 
   # Darwin sucks
   eval std_shrext=\"$shrext_cmds\"
 
 

   # Only execute mode is allowed to have -dlopen flags.
   if test -n "$execute_dlfiles" && test "$mode" != execute; then

     func_error "unrecognized option \`-dlopen'"
     $ECHO "$help" 1>&2

     exit $EXIT_FAILURE
   fi
 
   # Change the help message to a mode-specific one.
   generic_help="$help"

   help="Try \`$progname --help --mode=$mode' for more information."
 }
 
 
 # func_lalib_p file
 # True iff FILE is a libtool `.la' library or `.lo' object file.
 # This function is only a basic sanity check; it will hardly flush out
 # determined imposters.
 func_lalib_p ()
 {
     test -f "$1" &&
       $SED -e 4q "$1" 2>/dev/null \
         | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
 }
 
 # func_lalib_unsafe_p file
 # True iff FILE is a libtool `.la' library or `.lo' object file.
 # This function implements the same check as func_lalib_p without
 # resorting to external programs.  To this end, it redirects stdin and
 # closes it afterwards, without saving the original file descriptor.
 # As a safety measure, use it only where a negative result would be
 # fatal anyway.  Works if `file' does not exist.
 func_lalib_unsafe_p ()
 {
     lalib_p=no
     if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
 	for lalib_p_l in 1 2 3 4
 	do
 	    read lalib_p_line
 	    case "$lalib_p_line" in
 		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
 	    esac
 	done
 	exec 0<&5 5<&-
     fi
     test "$lalib_p" = yes
 }
 
 # func_ltwrapper_script_p file
 # True iff FILE is a libtool wrapper script
 # This function is only a basic sanity check; it will hardly flush out
 # determined imposters.
 func_ltwrapper_script_p ()
 {
     func_lalib_p "$1"
 }
 
 # func_ltwrapper_executable_p file
 # True iff FILE is a libtool wrapper executable
 # This function is only a basic sanity check; it will hardly flush out
 # determined imposters.
 func_ltwrapper_executable_p ()
 {
     func_ltwrapper_exec_suffix=
     case $1 in
     *.exe) ;;
     *) func_ltwrapper_exec_suffix=.exe ;;
     esac
     $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
 }
 
 # func_ltwrapper_scriptname file
 # Assumes file is an ltwrapper_executable
 # uses $file to determine the appropriate filename for a
 # temporary ltwrapper_script.
 func_ltwrapper_scriptname ()
 {
     func_ltwrapper_scriptname_result=""
     if func_ltwrapper_executable_p "$1"; then
 	func_dirname_and_basename "$1" "" "."
 	func_stripname '' '.exe' "$func_basename_result"
 	func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
     fi
 }
 
 # func_ltwrapper_p file
 # True iff FILE is a libtool wrapper script or wrapper executable
 # This function is only a basic sanity check; it will hardly flush out
 # determined imposters.
 func_ltwrapper_p ()
 {
     func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
 }
 
 
 # func_execute_cmds commands fail_cmd
 # Execute tilde-delimited COMMANDS.
 # If FAIL_CMD is given, eval that upon failure.
 # FAIL_CMD may read-access the current command in variable CMD!
 func_execute_cmds ()
 {
     $opt_debug
     save_ifs=$IFS; IFS='~'
     for cmd in $1; do
       IFS=$save_ifs
       eval cmd=\"$cmd\"
       func_show_eval "$cmd" "${2-:}"
     done
     IFS=$save_ifs
 }

 
 # func_source file
 # Source FILE, adding directory component if necessary.
 # Note that it is not necessary on cygwin/mingw to append a dot to
 # FILE even if both FILE and FILE.exe exist: automatic-append-.exe
 # behavior happens only for exec(3), not for open(2)!  Also, sourcing
 # `FILE.' does not work on cygwin managed mounts.
 func_source ()
 {
     $opt_debug
     case $1 in
     */* | *\\*)	. "$1" ;;
     *)		. "./$1" ;;
     esac
 }
 
 
 # func_infer_tag arg
 # Infer tagged configuration to use if any are available and
 # if one wasn't chosen via the "--tag" command line option.
 # Only attempt this if the compiler in the base compile
 # command doesn't match the default compiler.
 # arg is usually of the form 'gcc ...'
 func_infer_tag ()
 {
     $opt_debug
     if test -n "$available_tags" && test -z "$tagname"; then
       CC_quoted=
       for arg in $CC; do
         func_quote_for_eval "$arg"
 	CC_quoted="$CC_quoted $func_quote_for_eval_result"
       done
       case $@ in
       # Blanks in the command may have been stripped by the calling shell,
       # but not from the CC environment variable when configure was run.
       " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
       # Blanks at the start of $base_compile will cause this to fail
       # if we don't check for them as well.
       *)
 	for z in $available_tags; do
 	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
 	    # Evaluate the configuration.
 	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
 	    CC_quoted=
 	    for arg in $CC; do
 	      # Double-quote args containing other shell metacharacters.
 	      func_quote_for_eval "$arg"
 	      CC_quoted="$CC_quoted $func_quote_for_eval_result"
 	    done
 	    case "$@ " in
 	      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
 	      # The compiler in the base compile command matches
 	      # the one in the tagged configuration.
 	      # Assume this is the tagged configuration we want.
 	      tagname=$z
 	      break
 	      ;;
 	    esac
 	  fi
 	done
 	# If $tagname still isn't set, then no tagged configuration
 	# was found and let the user know that the "--tag" command
 	# line option must be used.
 	if test -z "$tagname"; then
 	  func_echo "unable to infer tagged configuration"
 	  func_fatal_error "specify a tag with \`--tag'"
 #	else
 #	  func_verbose "using $tagname tagged configuration"
 	fi
 	;;
       esac
     fi
 }
 
 
 
 # func_write_libtool_object output_name pic_name nonpic_name
 # Create a libtool object file (analogous to a ".la" file),
 # but don't create it if we're doing a dry run.
 func_write_libtool_object ()
 {
     write_libobj=${1}
     if test "$build_libtool_libs" = yes; then
       write_lobj=\'${2}\'
     else
       write_lobj=none
     fi
 
     if test "$build_old_libs" = yes; then
       write_oldobj=\'${3}\'
     else
       write_oldobj=none
     fi
 
     $opt_dry_run || {
       cat >${write_libobj}T <<EOF
 # $write_libobj - a libtool object file
 # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
 #
 # Please DO NOT delete this file!
 # It is necessary for linking the library.
 
 # Name of the PIC object.
 pic_object=$write_lobj
 
 # Name of the non-PIC object
 non_pic_object=$write_oldobj
 
 EOF
       $MV "${write_libobj}T" "${write_libobj}"
     }
 }
 
 # func_mode_compile arg...
 func_mode_compile ()
 {
     $opt_debug

     # Get the compilation command and the source file.
     base_compile=
     srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
     suppress_opt=yes
     suppress_output=
     arg_mode=normal
     libobj=
     later=

     pie_flag=

 
     for arg
     do
       case $arg_mode in
       arg  )
 	# do not "continue".  Instead, add this to base_compile
 	lastarg="$arg"
 	arg_mode=normal
 	;;
 
       target )
 	libobj="$arg"
 	arg_mode=normal
 	continue
 	;;
 
       normal )
 	# Accept any command-line options.
 	case $arg in
 	-o)

 	  test -n "$libobj" && \
 	    func_fatal_error "you cannot specify \`-o' more than once"

 	  arg_mode=target
 	  continue
 	  ;;
 

 	-pie | -fpie | -fPIE)
           pie_flag="$pie_flag $arg"
 	  continue
 	  ;;
 
 	-shared | -static | -prefer-pic | -prefer-non-pic)

 	  later="$later $arg"
 	  continue
 	  ;;
 
 	-no-suppress)
 	  suppress_opt=no
 	  continue
 	  ;;
 
 	-Xcompiler)
 	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
 	  continue      #  The current "srcfile" will either be retained or
 	  ;;            #  replaced later.  I would guess that would be a bug.
 
 	-Wc,*)

 	  func_stripname '-Wc,' '' "$arg"
 	  args=$func_stripname_result

 	  lastarg=
 	  save_ifs="$IFS"; IFS=','

 	  for arg in $args; do

 	    IFS="$save_ifs"

 	    func_quote_for_eval "$arg"
 	    lastarg="$lastarg $func_quote_for_eval_result"

 	  done
 	  IFS="$save_ifs"

 	  func_stripname ' ' '' "$lastarg"
 	  lastarg=$func_stripname_result

 
 	  # Add the arguments to base_compile.
 	  base_compile="$base_compile $lastarg"
 	  continue
 	  ;;
 

 	*)

 	  # Accept the current argument as the source file.
 	  # The previous "srcfile" becomes the current argument.
 	  #
 	  lastarg="$srcfile"
 	  srcfile="$arg"
 	  ;;
 	esac  #  case $arg
 	;;
       esac    #  case $arg_mode
 
       # Aesthetically quote the previous argument.

       func_quote_for_eval "$lastarg"
       base_compile="$base_compile $func_quote_for_eval_result"

     done # for arg
 
     case $arg_mode in
     arg)

       func_fatal_error "you must specify an argument for -Xcompile"

       ;;
     target)

       func_fatal_error "you must specify a target with \`-o'"

       ;;
     *)
       # Get the name of the library object.

       test -z "$libobj" && {
 	func_basename "$srcfile"
 	libobj="$func_basename_result"
       }

       ;;
     esac
 
     # Recognize several different file suffixes.
     # If the user specifies -o file.o, it is replaced with file.lo
     case $libobj in

     *.[cCFSifmso] | \
     *.ada | *.adb | *.ads | *.asm | \
     *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
     *.[fF][09]? | *.for | *.java | *.obj | *.sx)
       func_xform "$libobj"
       libobj=$func_xform_result
       ;;

     esac
 
     case $libobj in

     *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;

     *)

       func_fatal_error "cannot determine name of library object from \`$libobj'"

       ;;
     esac
 
     func_infer_tag $base_compile
 
     for arg in $later; do
       case $arg in

       -shared)
 	test "$build_libtool_libs" != yes && \
 	  func_fatal_configuration "can not build a shared library"
 	build_old_libs=no
 	continue
 	;;
 

       -static)

 	build_libtool_libs=no

 	build_old_libs=yes
 	continue
 	;;
 
       -prefer-pic)
 	pic_mode=yes
 	continue
 	;;
 
       -prefer-non-pic)
 	pic_mode=no
 	continue
 	;;
       esac
     done
 

     func_quote_for_eval "$libobj"
     test "X$libobj" != "X$func_quote_for_eval_result" \
       && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
       && func_warning "libobj name \`$libobj' may not contain shell special characters."
     func_dirname_and_basename "$obj" "/" ""
     objname="$func_basename_result"
     xdir="$func_dirname_result"

     lobj=${xdir}$objdir/$objname
 

     test -z "$base_compile" && \
       func_fatal_help "you must specify a compilation command"

 
     # Delete any leftover library objects.
     if test "$build_old_libs" = yes; then
       removelist="$obj $lobj $libobj ${libobj}T"
     else
       removelist="$lobj $libobj ${libobj}T"
     fi
 
     # On Cygwin there's no "real" PIC flag so we must build both object types
     case $host_os in

     cygwin* | mingw* | pw32* | os2* | cegcc*)

       pic_mode=default
       ;;
     esac
     if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
       # non-PIC code in shared libraries is not supported
       pic_mode=default
     fi
 
     # Calculate the filename of the output object if compiler does
     # not support -o with -c
     if test "$compiler_c_o" = no; then

       output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}

       lockfile="$output_obj.lock"
     else
       output_obj=
       need_locks=no
       lockfile=
     fi
 
     # Lock this critical section if it is needed
     # We use this script file to make the link, it avoids creating a new file
     if test "$need_locks" = yes; then

       until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
 	func_echo "Waiting for $lockfile to be removed"

 	sleep 2
       done
     elif test "$need_locks" = warn; then
       if test -f "$lockfile"; then

 	$ECHO "\

 *** ERROR, $lockfile exists and contains:
 `cat $lockfile 2>/dev/null`
 
 This indicates that another process is trying to use the same
 temporary object file, and libtool could not work around it because
 your compiler does not support \`-c' and \`-o' together.  If you
 repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 

 	$opt_dry_run || $RM $removelist

 	exit $EXIT_FAILURE
       fi

       removelist="$removelist $output_obj"
       $ECHO "$srcfile" > "$lockfile"

     fi
 

     $opt_dry_run || $RM $removelist
     removelist="$removelist $lockfile"
     trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
 

     if test -n "$fix_srcfile_path"; then
       eval srcfile=\"$fix_srcfile_path\"
     fi

     func_quote_for_eval "$srcfile"
     qsrcfile=$func_quote_for_eval_result

 
     # Only build a PIC object if we are building libtool libraries.
     if test "$build_libtool_libs" = yes; then
       # Without this assignment, base_compile gets emptied.
       fbsd_hideous_sh_bug=$base_compile
 
       if test "$pic_mode" != no; then
 	command="$base_compile $qsrcfile $pic_flag"
       else
 	# Don't build PIC code
 	command="$base_compile $qsrcfile"
       fi
 

       func_mkdir_p "$xdir$objdir"

 
       if test -z "$output_obj"; then
 	# Place PIC objects in $objdir
 	command="$command -o $lobj"
       fi
 

       func_show_eval_locale "$command"	\
           'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'

 
       if test "$need_locks" = warn &&
 	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then

 	$ECHO "\

 *** ERROR, $lockfile contains:
 `cat $lockfile 2>/dev/null`
 
 but it should contain:
 $srcfile
 
 This indicates that another process is trying to use the same
 temporary object file, and libtool could not work around it because
 your compiler does not support \`-c' and \`-o' together.  If you
 repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 

 	$opt_dry_run || $RM $removelist

 	exit $EXIT_FAILURE
       fi
 
       # Just move the object if needed, then go on to compile the next one
       if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then

 	func_show_eval '$MV "$output_obj" "$lobj"' \
 	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'

       fi
 
       # Allow error messages only from the first compilation.
       if test "$suppress_opt" = yes; then

 	suppress_output=' >/dev/null 2>&1'

       fi
     fi
 
     # Only build a position-dependent object if we build old libraries.
     if test "$build_old_libs" = yes; then
       if test "$pic_mode" != yes; then
 	# Don't build PIC code

 	command="$base_compile $qsrcfile$pie_flag"

       else
 	command="$base_compile $qsrcfile $pic_flag"
       fi
       if test "$compiler_c_o" = yes; then
 	command="$command -o $obj"
       fi
 
       # Suppress compiler output if we already did a PIC compilation.
       command="$command$suppress_output"

       func_show_eval_locale "$command" \
         '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'

 
       if test "$need_locks" = warn &&
 	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then

 	$ECHO "\

 *** ERROR, $lockfile contains:
 `cat $lockfile 2>/dev/null`
 
 but it should contain:
 $srcfile
 
 This indicates that another process is trying to use the same
 temporary object file, and libtool could not work around it because
 your compiler does not support \`-c' and \`-o' together.  If you
 repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 

 	$opt_dry_run || $RM $removelist

 	exit $EXIT_FAILURE
       fi
 
       # Just move the object if needed
       if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then

 	func_show_eval '$MV "$output_obj" "$obj"' \
 	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
       fi
     fi
 
     $opt_dry_run || {
       func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
 
       # Unlock the critical section if it was locked
       if test "$need_locks" != no; then
 	removelist=$lockfile
         $RM "$lockfile"
       fi
     }
 
     exit $EXIT_SUCCESS
 }
 
 $opt_help || {
 test "$mode" = compile && func_mode_compile ${1+"$@"}
 }
 
 func_mode_help ()
 {
     # We need to display help for each of the modes.
     case $mode in
       "")
         # Generic help is extracted from the usage comments
         # at the start of this file.
         func_help
         ;;
 
       clean)
         $ECHO \
 "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
 
 Remove files from the build directory.
 
 RM is the name of the program to use to delete files associated with each FILE
 (typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
 to RM.
 
 If FILE is a libtool library, object or program, all the files associated
 with it are deleted. Otherwise, only FILE itself is deleted using RM."
         ;;
 
       compile)
       $ECHO \
 "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
 
 Compile a source file into a libtool library object.
 
 This mode accepts the following additional options:
 
   -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
   -no-suppress      do not suppress compiler output for multiple passes
   -prefer-pic       try to building PIC objects only
   -prefer-non-pic   try to building non-PIC objects only
   -shared           do not build a \`.o' file suitable for static linking
   -static           only build a \`.o' file suitable for static linking
 
 COMPILE-COMMAND is a command to be used in creating a \`standard' object file
 from the given SOURCEFILE.
 
 The output file name is determined by removing the directory component from
 SOURCEFILE, then substituting the C source code suffix \`.c' with the
 library object suffix, \`.lo'."
         ;;
 
       execute)
         $ECHO \
 "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
 
 Automatically set library path, then run a program.
 
 This mode accepts the following additional options:
 
   -dlopen FILE      add the directory containing FILE to the library path
 
 This mode sets the library path environment variable according to \`-dlopen'
 flags.
 
 If any of the ARGS are libtool executable wrappers, then they are translated
 into their corresponding uninstalled binary, and any of their required library
 directories are added to the library path.
 
 Then, COMMAND is executed, with ARGS as arguments."
         ;;
 
       finish)
         $ECHO \
 "Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
 
 Complete the installation of libtool libraries.
 
 Each LIBDIR is a directory that contains libtool libraries.
 
 The commands that this mode executes may require superuser privileges.  Use
 the \`--dry-run' option if you just want to see what would be executed."
         ;;
 
       install)
         $ECHO \
 "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
 
 Install executables or libraries.
 
 INSTALL-COMMAND is the installation command.  The first component should be
 either the \`install' or \`cp' program.
 
 The following components of INSTALL-COMMAND are treated specially:
 
   -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
 
 The rest of the components are interpreted as arguments to that command (only
 BSD-compatible install options are recognized)."
         ;;
 
       link)
         $ECHO \
 "Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
 
 Link object files or libraries together to form another library, or to
 create an executable program.
 
 LINK-COMMAND is a command using the C compiler that you would use to create
 a program from several object files.
 
 The following components of LINK-COMMAND are treated specially:
 
   -all-static       do not do any dynamic linking at all
   -avoid-version    do not add a version suffix if possible
   -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
   -export-symbols SYMFILE
                     try to export only the symbols listed in SYMFILE
   -export-symbols-regex REGEX
                     try to export only the symbols matching REGEX
   -LLIBDIR          search LIBDIR for required installed libraries
   -lNAME            OUTPUT-FILE requires the installed library libNAME
   -module           build a library that can dlopened
   -no-fast-install  disable the fast-install mode
   -no-install       link a not-installable executable
   -no-undefined     declare that a library does not refer to external symbols
   -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
   -objectlist FILE  Use a list of object files found in FILE to specify objects
   -precious-files-regex REGEX
                     don't remove output files matching REGEX
   -release RELEASE  specify package release information
   -rpath LIBDIR     the created library will eventually be installed in LIBDIR
   -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
   -shared           only do dynamic linking of libtool libraries
   -shrext SUFFIX    override the standard shared library file extension
   -static           do not do any dynamic linking of uninstalled libtool libraries
   -static-libtool-libs
                     do not do any dynamic linking of libtool libraries
   -version-info CURRENT[:REVISION[:AGE]]
                     specify library version info [each variable defaults to 0]
   -weak LIBNAME     declare that the target provides the LIBNAME interface
 
 All other options (arguments beginning with \`-') are ignored.
 
 Every other argument is treated as a filename.  Files ending in \`.la' are
 treated as uninstalled libtool libraries, other files are standard or library
 object files.
 
 If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
 only library objects (\`.lo' files) may be specified, and \`-rpath' is
 required, except when creating a convenience library.
 
 If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
 using \`ar' and \`ranlib', or on Windows using \`lib'.
 
 If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
 is created, otherwise an executable program is created."
         ;;
 
       uninstall)
         $ECHO \
 "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
 
 Remove libraries from an installation directory.
 
 RM is the name of the program to use to delete files associated with each FILE
 (typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
 to RM.
 
 If FILE is a libtool library, all the files associated with it are deleted.
 Otherwise, only FILE itself is deleted using RM."
         ;;
 
       *)
         func_fatal_help "invalid operation mode \`$mode'"
         ;;
     esac
 
     $ECHO
     $ECHO "Try \`$progname --help' for more information about other modes."
 
     exit $?
 }
 
   # Now that we've collected a possible --mode arg, show help if necessary
   $opt_help && func_mode_help
 
 
 # func_mode_execute arg...
 func_mode_execute ()
 {
     $opt_debug
     # The first argument is the command name.
     cmd="$nonopt"
     test -z "$cmd" && \
       func_fatal_help "you must specify a COMMAND"
 
     # Handle -dlopen flags immediately.
     for file in $execute_dlfiles; do
       test -f "$file" \
 	|| func_fatal_help "\`$file' is not a file"
 
       dir=
       case $file in
       *.la)
 	# Check to see that this really is a libtool archive.
 	func_lalib_unsafe_p "$file" \
 	  || func_fatal_help "\`$lib' is not a valid libtool archive"
 
 	# Read the libtool library.
 	dlname=
 	library_names=
 	func_source "$file"
 
 	# Skip this library if it cannot be dlopened.
 	if test -z "$dlname"; then
 	  # Warn if it was a shared library.
 	  test -n "$library_names" && \
 	    func_warning "\`$file' was not linked with \`-export-dynamic'"
 	  continue
 	fi
 
 	func_dirname "$file" "" "."
 	dir="$func_dirname_result"
 
 	if test -f "$dir/$objdir/$dlname"; then
 	  dir="$dir/$objdir"

 	else

 	  if test ! -f "$dir/$dlname"; then
 	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
 	  fi

 	fi

 	;;
 
       *.lo)
 	# Just add the directory containing the .lo file.
 	func_dirname "$file" "" "."
 	dir="$func_dirname_result"
 	;;
 
       *)
 	func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
 	continue
 	;;
       esac
 
       # Get the absolute pathname.
       absdir=`cd "$dir" && pwd`
       test -n "$absdir" && dir="$absdir"
 
       # Now add the directory to shlibpath_var.
       if eval "test -z \"\$$shlibpath_var\""; then
 	eval "$shlibpath_var=\"\$dir\""
       else
 	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""

       fi

     done

     # This variable tells wrapper scripts just to set shlibpath_var
     # rather than running their programs.
     libtool_execute_magic="$magic"

     # Check if any of the arguments is a wrapper script.
     args=
     for file
     do
       case $file in
       -*) ;;
       *)
 	# Do a test to see if this is really a libtool program.
 	if func_ltwrapper_script_p "$file"; then
 	  func_source "$file"
 	  # Transform arg to wrapped name.
 	  file="$progdir/$program"
 	elif func_ltwrapper_executable_p "$file"; then
 	  func_ltwrapper_scriptname "$file"
 	  func_source "$func_ltwrapper_scriptname_result"
 	  # Transform arg to wrapped name.
 	  file="$progdir/$program"
 	fi
 	;;
       esac
       # Quote arguments (to preserve shell metacharacters).
       func_quote_for_eval "$file"
       args="$args $func_quote_for_eval_result"
     done
 
     if test "X$opt_dry_run" = Xfalse; then
       if test -n "$shlibpath_var"; then
 	# Export the shlibpath_var.
 	eval "export $shlibpath_var"
       fi
 
       # Restore saved environment variables
       for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
       do
 	eval "if test \"\${save_$lt_var+set}\" = set; then
                 $lt_var=\$save_$lt_var; export $lt_var
 	      else
 		$lt_unset $lt_var
 	      fi"
       done
 
       # Now prepare to actually exec the command.
       exec_cmd="\$cmd$args"

     else

       # Display what would be done.
       if test -n "$shlibpath_var"; then
 	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
 	$ECHO "export $shlibpath_var"
       fi
       $ECHO "$cmd$args"
       exit $EXIT_SUCCESS
     fi
 }

 test "$mode" = execute && func_mode_execute ${1+"$@"}
 
 
 # func_mode_finish arg...
 func_mode_finish ()
 {
     $opt_debug
     libdirs="$nonopt"
     admincmds=
 
     if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
       for dir
       do
 	libdirs="$libdirs $dir"
       done
 
       for libdir in $libdirs; do
 	if test -n "$finish_cmds"; then
 	  # Do each command in the finish commands.
 	  func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
 '"$cmd"'"'
 	fi
 	if test -n "$finish_eval"; then
 	  # Do the single finish_eval.
 	  eval cmds=\"$finish_eval\"
 	  $opt_dry_run || eval "$cmds" || admincmds="$admincmds
        $cmds"
 	fi
       done

     fi
 

     # Exit here if they wanted silent mode.
     $opt_silent && exit $EXIT_SUCCESS
 
     $ECHO "X----------------------------------------------------------------------" | $Xsed
     $ECHO "Libraries have been installed in:"
     for libdir in $libdirs; do
       $ECHO "   $libdir"
     done
     $ECHO
     $ECHO "If you ever happen to want to link against installed libraries"
     $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
     $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
     $ECHO "flag during linking and do at least one of the following:"
     if test -n "$shlibpath_var"; then
       $ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"
       $ECHO "     during execution"
     fi
     if test -n "$runpath_var"; then
       $ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"
       $ECHO "     during linking"
     fi
     if test -n "$hardcode_libdir_flag_spec"; then
       libdir=LIBDIR
       eval flag=\"$hardcode_libdir_flag_spec\"

       $ECHO "   - use the \`$flag' linker flag"
     fi
     if test -n "$admincmds"; then
       $ECHO "   - have your system administrator run these commands:$admincmds"
     fi
     if test -f /etc/ld.so.conf; then
       $ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"

     fi

     $ECHO

     $ECHO "See any operating system documentation about shared libraries for"
     case $host in
       solaris2.[6789]|solaris2.1[0-9])
         $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
 	$ECHO "pages."
 	;;
       *)
         $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
         ;;
     esac
     $ECHO "X----------------------------------------------------------------------" | $Xsed

     exit $EXIT_SUCCESS

 }
 
 test "$mode" = finish && func_mode_finish ${1+"$@"}
 
 
 # func_mode_install arg...
 func_mode_install ()
 {
     $opt_debug
     # There may be an optional sh(1) argument at the beginning of
     # install_prog (especially on Windows NT).
     if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
        # Allow the use of GNU shtool's install command.
        $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
       # Aesthetically quote it.
       func_quote_for_eval "$nonopt"
       install_prog="$func_quote_for_eval_result "
       arg=$1
       shift
     else
       install_prog=
       arg=$nonopt
     fi
 
     # The real first argument should be the name of the installation program.
     # Aesthetically quote it.
     func_quote_for_eval "$arg"
     install_prog="$install_prog$func_quote_for_eval_result"
 
     # We need to accept at least all the BSD install flags.
     dest=
     files=
     opts=
     prev=
     install_type=
     isdir=no
     stripme=
     for arg
     do
       if test -n "$dest"; then
 	files="$files $dest"
 	dest=$arg
 	continue
       fi
 
       case $arg in
       -d) isdir=yes ;;
       -f)
 	case " $install_prog " in
 	*[\\\ /]cp\ *) ;;
 	*) prev=$arg ;;
 	esac
 	;;
       -g | -m | -o)
 	prev=$arg
 	;;
       -s)
 	stripme=" -s"
 	continue
 	;;
       -*)
 	;;
       *)
 	# If the previous option needed an argument, then skip it.
 	if test -n "$prev"; then
 	  prev=
 	else
 	  dest=$arg
 	  continue
 	fi
 	;;
       esac
 
       # Aesthetically quote the argument.
       func_quote_for_eval "$arg"
       install_prog="$install_prog $func_quote_for_eval_result"
     done
 
     test -z "$install_prog" && \
       func_fatal_help "you must specify an install program"
 
     test -n "$prev" && \
       func_fatal_help "the \`$prev' option requires an argument"
 
     if test -z "$files"; then
       if test -z "$dest"; then
 	func_fatal_help "no file or destination specified"
       else
 	func_fatal_help "you must specify a destination"
       fi
     fi
 
     # Strip any trailing slash from the destination.
     func_stripname '' '/' "$dest"
     dest=$func_stripname_result
 
     # Check to see that the destination is a directory.
     test -d "$dest" && isdir=yes
     if test "$isdir" = yes; then
       destdir="$dest"
       destname=
     else
       func_dirname_and_basename "$dest" "" "."
       destdir="$func_dirname_result"
       destname="$func_basename_result"
 
       # Not a directory, so check to see that there is only one file specified.
       set dummy $files; shift
       test "$#" -gt 1 && \
 	func_fatal_help "\`$dest' is not a directory"
     fi
     case $destdir in
     [\\/]* | [A-Za-z]:[\\/]*) ;;
     *)
       for file in $files; do
 	case $file in
 	*.lo) ;;
 	*)
 	  func_fatal_help "\`$destdir' must be an absolute directory name"
 	  ;;
 	esac
       done
       ;;
     esac
 
     # This variable tells wrapper scripts just to set variables rather
     # than running their programs.
     libtool_install_magic="$magic"
 
     staticlibs=
     future_libdirs=
     current_libdirs=
     for file in $files; do
 
       # Do each installation.
       case $file in
       *.$libext)
 	# Do the static libraries later.
 	staticlibs="$staticlibs $file"
 	;;
 
       *.la)
 	# Check to see that this really is a libtool archive.
 	func_lalib_unsafe_p "$file" \
 	  || func_fatal_help "\`$file' is not a valid libtool archive"
 
 	library_names=
 	old_library=
 	relink_command=
 	func_source "$file"
 
 	# Add the libdir to current_libdirs if it is the destination.
 	if test "X$destdir" = "X$libdir"; then
 	  case "$current_libdirs " in
 	  *" $libdir "*) ;;
 	  *) current_libdirs="$current_libdirs $libdir" ;;
 	  esac
 	else
 	  # Note the libdir as a future libdir.
 	  case "$future_libdirs " in
 	  *" $libdir "*) ;;
 	  *) future_libdirs="$future_libdirs $libdir" ;;
 	  esac
 	fi
 
 	func_dirname "$file" "/" ""
 	dir="$func_dirname_result"
 	dir="$dir$objdir"
 
 	if test -n "$relink_command"; then
 	  # Determine the prefix the user has applied to our future dir.
 	  inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
 
 	  # Don't allow the user to place us outside of our expected
 	  # location b/c this prevents finding dependent libraries that
 	  # are installed to the same prefix.
 	  # At present, this check doesn't affect windows .dll's that
 	  # are installed into $libdir/../bin (currently, that works fine)
 	  # but it's something to keep an eye on.
 	  test "$inst_prefix_dir" = "$destdir" && \
 	    func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
 
 	  if test -n "$inst_prefix_dir"; then
 	    # Stick the inst_prefix_dir data into the link command.
 	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
 	  else
 	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
 	  fi
 
 	  func_warning "relinking \`$file'"
 	  func_show_eval "$relink_command" \
 	    'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
 	fi
 
 	# See the names of the shared library.
 	set dummy $library_names; shift
 	if test -n "$1"; then
 	  realname="$1"
 	  shift
 
 	  srcname="$realname"
 	  test -n "$relink_command" && srcname="$realname"T
 
 	  # Install the shared library and build the symlinks.
 	  func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
 	      'exit $?'
 	  tstripme="$stripme"
 	  case $host_os in
 	  cygwin* | mingw* | pw32* | cegcc*)
 	    case $realname in
 	    *.dll.a)
 	      tstripme=""
 	      ;;
 	    esac
 	    ;;
 	  esac
 	  if test -n "$tstripme" && test -n "$striplib"; then
 	    func_show_eval "$striplib $destdir/$realname" 'exit $?'
 	  fi
 
 	  if test "$#" -gt 0; then
 	    # Delete the old symlinks, and create new ones.
 	    # Try `ln -sf' first, because the `ln' binary might depend on
 	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
 	    # so we also need to try rm && ln -s.
 	    for linkname
 	    do
 	      test "$linkname" != "$realname" \
 		&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
 	    done
 	  fi
 
 	  # Do each command in the postinstall commands.
 	  lib="$destdir/$realname"
 	  func_execute_cmds "$postinstall_cmds" 'exit $?'
 	fi
 
 	# Install the pseudo-library for information purposes.
 	func_basename "$file"
 	name="$func_basename_result"
 	instname="$dir/$name"i
 	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
 
 	# Maybe install the static library, too.
 	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
 	;;
 
       *.lo)
 	# Install (i.e. copy) a libtool object.
 
 	# Figure out destination file name, if it wasn't already specified.
 	if test -n "$destname"; then
 	  destfile="$destdir/$destname"
 	else
 	  func_basename "$file"
 	  destfile="$func_basename_result"
 	  destfile="$destdir/$destfile"
 	fi
 
 	# Deduce the name of the destination old-style object file.
 	case $destfile in
 	*.lo)
 	  func_lo2o "$destfile"
 	  staticdest=$func_lo2o_result
 	  ;;
 	*.$objext)
 	  staticdest="$destfile"
 	  destfile=
 	  ;;
 	*)
 	  func_fatal_help "cannot copy a libtool object to \`$destfile'"
 	  ;;
 	esac
 
 	# Install the libtool object if requested.
 	test -n "$destfile" && \
 	  func_show_eval "$install_prog $file $destfile" 'exit $?'
 
 	# Install the old object if enabled.
 	if test "$build_old_libs" = yes; then
 	  # Deduce the name of the old-style object file.
 	  func_lo2o "$file"
 	  staticobj=$func_lo2o_result
 	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
 	fi
 	exit $EXIT_SUCCESS
 	;;
 
       *)
 	# Figure out destination file name, if it wasn't already specified.
 	if test -n "$destname"; then
 	  destfile="$destdir/$destname"
 	else
 	  func_basename "$file"
 	  destfile="$func_basename_result"
 	  destfile="$destdir/$destfile"
 	fi
 
 	# If the file is missing, and there is a .exe on the end, strip it
 	# because it is most likely a libtool script we actually want to
 	# install
 	stripped_ext=""
 	case $file in
 	  *.exe)
 	    if test ! -f "$file"; then
 	      func_stripname '' '.exe' "$file"
 	      file=$func_stripname_result
 	      stripped_ext=".exe"
 	    fi
 	    ;;
 	esac
 
 	# Do a test to see if this is really a libtool program.
 	case $host in
 	*cygwin* | *mingw*)
 	    if func_ltwrapper_executable_p "$file"; then
 	      func_ltwrapper_scriptname "$file"
 	      wrapper=$func_ltwrapper_scriptname_result
 	    else
 	      func_stripname '' '.exe' "$file"
 	      wrapper=$func_stripname_result
 	    fi
 	    ;;
 	*)
 	    wrapper=$file
 	    ;;
 	esac
 	if func_ltwrapper_script_p "$wrapper"; then
 	  notinst_deplibs=
 	  relink_command=
 
 	  func_source "$wrapper"
 
 	  # Check the variables that should have been set.
 	  test -z "$generated_by_libtool_version" && \
 	    func_fatal_error "invalid libtool wrapper script \`$wrapper'"
 
 	  finalize=yes
 	  for lib in $notinst_deplibs; do
 	    # Check to see that each library is installed.
 	    libdir=
 	    if test -f "$lib"; then
 	      func_source "$lib"
 	    fi
 	    libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
 	    if test -n "$libdir" && test ! -f "$libfile"; then
 	      func_warning "\`$lib' has not been installed in \`$libdir'"
 	      finalize=no
 	    fi
 	  done
 
 	  relink_command=
 	  func_source "$wrapper"
 
 	  outputname=
 	  if test "$fast_install" = no && test -n "$relink_command"; then
 	    $opt_dry_run || {
 	      if test "$finalize" = yes; then
 	        tmpdir=`func_mktempdir`
 		func_basename "$file$stripped_ext"
 		file="$func_basename_result"
 	        outputname="$tmpdir/$file"
 	        # Replace the output file specification.
 	        relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
 
 	        $opt_silent || {
 	          func_quote_for_expand "$relink_command"
 		  eval "func_echo $func_quote_for_expand_result"
 	        }
 	        if eval "$relink_command"; then :
 	          else
 		  func_error "error: relink \`$file' with the above command before installing it"
 		  $opt_dry_run || ${RM}r "$tmpdir"
 		  continue
 	        fi
 	        file="$outputname"
 	      else
 	        func_warning "cannot relink \`$file'"
 	      fi
 	    }
 	  else
 	    # Install the binary that we compiled earlier.
 	    file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
 	  fi
 	fi
 
 	# remove .exe since cygwin /usr/bin/install will append another
 	# one anyway
 	case $install_prog,$host in
 	*/usr/bin/install*,*cygwin*)
 	  case $file:$destfile in
 	  *.exe:*.exe)
 	    # this is ok
 	    ;;
 	  *.exe:*)
 	    destfile=$destfile.exe
 	    ;;
 	  *:*.exe)
 	    func_stripname '' '.exe' "$destfile"
 	    destfile=$func_stripname_result
 	    ;;
 	  esac
 	  ;;
 	esac
 	func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
 	$opt_dry_run || if test -n "$outputname"; then
 	  ${RM}r "$tmpdir"
 	fi
 	;;
       esac
     done
 
     for file in $staticlibs; do
       func_basename "$file"
       name="$func_basename_result"
 
       # Set up the ranlib parameters.
       oldlib="$destdir/$name"
 
       func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
 
       if test -n "$stripme" && test -n "$old_striplib"; then
 	func_show_eval "$old_striplib $oldlib" 'exit $?'
       fi
 
       # Do each command in the postinstall commands.
       func_execute_cmds "$old_postinstall_cmds" 'exit $?'
     done
 
     test -n "$future_libdirs" && \
       func_warning "remember to run \`$progname --finish$future_libdirs'"
 
     if test -n "$current_libdirs"; then
       # Maybe just do a dry run.
       $opt_dry_run && current_libdirs=" -n$current_libdirs"
       exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
     else
       exit $EXIT_SUCCESS
     fi
 }
 
 test "$mode" = install && func_mode_install ${1+"$@"}
 
 
 # func_generate_dlsyms outputname originator pic_p
 # Extract symbols from dlprefiles and create ${outputname}S.o with
 # a dlpreopen symbol table.
 func_generate_dlsyms ()
 {
     $opt_debug
     my_outputname="$1"
     my_originator="$2"
     my_pic_p="${3-no}"
     my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
     my_dlsyms=
 
     if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
       if test -n "$NM" && test -n "$global_symbol_pipe"; then
 	my_dlsyms="${my_outputname}S.c"
       else
 	func_error "not configured to extract global symbols from dlpreopened files"
       fi
     fi
 
     if test -n "$my_dlsyms"; then
       case $my_dlsyms in
       "") ;;
       *.c)
 	# Discover the nlist of each of the dlfiles.
 	nlist="$output_objdir/${my_outputname}.nm"
 
 	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
 
 	# Parse the name list into a source file.
 	func_verbose "creating $output_objdir/$my_dlsyms"
 
 	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
 /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
 /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
 
 #ifdef __cplusplus
 extern \"C\" {
 #endif
 
 /* External symbol declarations for the compiler. */\
 "
 
 	if test "$dlself" = yes; then
 	  func_verbose "generating symbol list for \`$output'"
 
 	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
 
 	  # Add our own program objects to the symbol list.
 	  progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
 	  for progfile in $progfiles; do
 	    func_verbose "extracting global C symbols from \`$progfile'"
 	    $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
 	  done
 
 	  if test -n "$exclude_expsyms"; then
 	    $opt_dry_run || {
 	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
 	      eval '$MV "$nlist"T "$nlist"'
 	    }
 	  fi
 
 	  if test -n "$export_symbols_regex"; then
 	    $opt_dry_run || {
 	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
 	      eval '$MV "$nlist"T "$nlist"'
 	    }
 	  fi
 
 	  # Prepare the list of exported symbols
 	  if test -z "$export_symbols"; then
 	    export_symbols="$output_objdir/$outputname.exp"
 	    $opt_dry_run || {
 	      $RM $export_symbols
 	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
 	      case $host in
 	      *cygwin* | *mingw* | *cegcc* )
                 eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
                 eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
 	        ;;
 	      esac
 	    }
 	  else
 	    $opt_dry_run || {
 	      eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
 	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
 	      eval '$MV "$nlist"T "$nlist"'
 	      case $host in
 	        *cygwin | *mingw* | *cegcc* )
 	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
 	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
 	          ;;
 	      esac
 	    }
 	  fi
 	fi
 
 	for dlprefile in $dlprefiles; do
 	  func_verbose "extracting global C symbols from \`$dlprefile'"
 	  func_basename "$dlprefile"
 	  name="$func_basename_result"
 	  $opt_dry_run || {
 	    eval '$ECHO ": $name " >> "$nlist"'
 	    eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
 	  }
 	done
 
 	$opt_dry_run || {
 	  # Make sure we have at least an empty file.
 	  test -f "$nlist" || : > "$nlist"
 
 	  if test -n "$exclude_expsyms"; then
 	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
 	    $MV "$nlist"T "$nlist"
 	  fi
 
 	  # Try sorting and uniquifying the output.
 	  if $GREP -v "^: " < "$nlist" |
 	      if sort -k 3 </dev/null >/dev/null 2>&1; then
 		sort -k 3
 	      else
 		sort +2
 	      fi |
 	      uniq > "$nlist"S; then
 	    :
 	  else
 	    $GREP -v "^: " < "$nlist" > "$nlist"S
 	  fi
 
 	  if test -f "$nlist"S; then
 	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
 	  else
 	    $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
 	  fi
 
 	  $ECHO >> "$output_objdir/$my_dlsyms" "\
 
 /* The mapping between symbol names and symbols.  */
 typedef struct {
   const char *name;
   void *address;
 } lt_dlsymlist;
 "
 	  case $host in
 	  *cygwin* | *mingw* | *cegcc* )
 	    $ECHO >> "$output_objdir/$my_dlsyms" "\
 /* DATA imports from DLLs on WIN32 con't be const, because
    runtime relocations are performed -- see ld's documentation
    on pseudo-relocs.  */"
 	    lt_dlsym_const= ;;
 	  *osf5*)
 	    echo >> "$output_objdir/$my_dlsyms" "\
 /* This system does not cope well with relocations in const data */"
 	    lt_dlsym_const= ;;
 	  *)
 	    lt_dlsym_const=const ;;
 	  esac
 
 	  $ECHO >> "$output_objdir/$my_dlsyms" "\
 extern $lt_dlsym_const lt_dlsymlist
 lt_${my_prefix}_LTX_preloaded_symbols[];
 $lt_dlsym_const lt_dlsymlist
 lt_${my_prefix}_LTX_preloaded_symbols[] =
 {\
   { \"$my_originator\", (void *) 0 },"
 
 	  case $need_lib_prefix in
 	  no)
 	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
 	    ;;
 	  *)
 	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
 	    ;;
 	  esac
 	  $ECHO >> "$output_objdir/$my_dlsyms" "\
   {0, (void *) 0}
 };
 
 /* This works around a problem in FreeBSD linker */
 #ifdef FREEBSD_WORKAROUND
 static const void *lt_preloaded_setup() {
   return lt_${my_prefix}_LTX_preloaded_symbols;
 }
 #endif
 
 #ifdef __cplusplus
 }
 #endif\
 "
 	} # !$opt_dry_run
 
 	pic_flag_for_symtable=
 	case "$compile_command " in
 	*" -static "*) ;;
 	*)
 	  case $host in
 	  # compiling the symbol table file with pic_flag works around
 	  # a FreeBSD bug that causes programs to crash when -lm is
 	  # linked before any other PIC object.  But we must not use
 	  # pic_flag when linking with -static.  The problem exists in
 	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
 	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
 	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
 	  *-*-hpux*)
 	    pic_flag_for_symtable=" $pic_flag"  ;;
 	  *)
 	    if test "X$my_pic_p" != Xno; then
 	      pic_flag_for_symtable=" $pic_flag"
 	    fi
 	    ;;
 	  esac
 	  ;;
 	esac
 	symtab_cflags=
 	for arg in $LTCFLAGS; do
 	  case $arg in
 	  -pie | -fpie | -fPIE) ;;
 	  *) symtab_cflags="$symtab_cflags $arg" ;;
 	  esac
 	done
 
 	# Now compile the dynamic symbol file.
 	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
 
 	# Clean up the generated files.
 	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
 
 	# Transform the symbol file into the correct name.
 	symfileobj="$output_objdir/${my_outputname}S.$objext"
 	case $host in
 	*cygwin* | *mingw* | *cegcc* )
 	  if test -f "$output_objdir/$my_outputname.def"; then
 	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
 	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
 	  else
 	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
 	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
 	  fi
 	  ;;
 	*)
 	  compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
 	  finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
 	  ;;
 	esac
 	;;
       *)
 	func_fatal_error "unknown suffix for \`$my_dlsyms'"
 	;;
       esac
     else
       # We keep going just in case the user didn't refer to
       # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
       # really was required.
 
       # Nullify the symbol file.
       compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
       finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
     fi
 }
 
 # func_win32_libid arg
 # return the library type of file 'arg'
 #
 # Need a lot of goo to handle *both* DLLs and import libs
 # Has to be a shell function in order to 'eat' the argument
 # that is supplied when $file_magic_command is called.
 func_win32_libid ()
 {
   $opt_debug
   win32_libid_type="unknown"
   win32_fileres=`file -L $1 2>/dev/null`
   case $win32_fileres in
   *ar\ archive\ import\ library*) # definitely import
     win32_libid_type="x86 archive import"
     ;;
   *ar\ archive*) # could be an import, or static
     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
        $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
       win32_nmres=`eval $NM -f posix -A $1 |
 	$SED -n -e '
 	    1,100{
 		/ I /{
 		    s,.*,import,
 		    p
 		    q
 		}
 	    }'`
       case $win32_nmres in
       import*)  win32_libid_type="x86 archive import";;
       *)        win32_libid_type="x86 archive static";;
       esac
     fi

     ;;

   *DLL*)
     win32_libid_type="x86 DLL"
     ;;
   *executable*) # but shell scripts are "executable" too...
     case $win32_fileres in
     *MS\ Windows\ PE\ Intel*)
       win32_libid_type="x86 DLL"
       ;;
     esac
     ;;
   esac
   $ECHO "$win32_libid_type"
 }
 
 
 
 # func_extract_an_archive dir oldlib
 func_extract_an_archive ()
 {
     $opt_debug
     f_ex_an_ar_dir="$1"; shift
     f_ex_an_ar_oldlib="$1"
     func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
     if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
      :
     else
       func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
     fi
 }
 
 
 # func_extract_archives gentop oldlib ...
 func_extract_archives ()
 {
     $opt_debug
     my_gentop="$1"; shift
     my_oldlibs=${1+"$@"}
     my_oldobjs=""
     my_xlib=""
     my_xabs=""
     my_xdir=""
 
     for my_xlib in $my_oldlibs; do
       # Extract the objects.
       case $my_xlib in
 	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
 	*) my_xabs=`pwd`"/$my_xlib" ;;
       esac
       func_basename "$my_xlib"
       my_xlib="$func_basename_result"
       my_xlib_u=$my_xlib
       while :; do
         case " $extracted_archives " in
 	*" $my_xlib_u "*)
 	  func_arith $extracted_serial + 1
 	  extracted_serial=$func_arith_result
 	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
 	*) break ;;
 	esac
       done
       extracted_archives="$extracted_archives $my_xlib_u"
       my_xdir="$my_gentop/$my_xlib_u"
 
       func_mkdir_p "$my_xdir"
 
       case $host in
       *-darwin*)
 	func_verbose "Extracting $my_xabs"
 	# Do not bother doing anything if just a dry run
 	$opt_dry_run || {
 	  darwin_orig_dir=`pwd`
 	  cd $my_xdir || exit $?
 	  darwin_archive=$my_xabs
 	  darwin_curdir=`pwd`
 	  darwin_base_archive=`basename "$darwin_archive"`
 	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
 	  if test -n "$darwin_arches"; then
 	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
 	    darwin_arch=
 	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
 	    for darwin_arch in  $darwin_arches ; do
 	      func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
 	      $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
 	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
 	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
 	      cd "$darwin_curdir"
 	      $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
 	    done # $darwin_arches
             ## Okay now we've a bunch of thin objects, gotta fatten them up :)
 	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
 	    darwin_file=
 	    darwin_files=
 	    for darwin_file in $darwin_filelist; do
 	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
 	      $LIPO -create -output "$darwin_file" $darwin_files
 	    done # $darwin_filelist
 	    $RM -rf unfat-$$
 	    cd "$darwin_orig_dir"
 	  else
 	    cd $darwin_orig_dir
 	    func_extract_an_archive "$my_xdir" "$my_xabs"
 	  fi # $darwin_arches
 	} # !$opt_dry_run
 	;;
       *)
         func_extract_an_archive "$my_xdir" "$my_xabs"
 	;;
       esac
       my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
     done
 
     func_extract_archives_result="$my_oldobjs"
 }
 
 
 
 # func_emit_wrapper_part1 [arg=no]
 #
 # Emit the first part of a libtool wrapper script on stdout.
 # For more information, see the description associated with
 # func_emit_wrapper(), below.
 func_emit_wrapper_part1 ()
 {
 	func_emit_wrapper_part1_arg1=no
 	if test -n "$1" ; then
 	  func_emit_wrapper_part1_arg1=$1
 	fi
 
 	$ECHO "\
 #! $SHELL
 
 # $output - temporary wrapper script for $objdir/$outputname
 # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
 #
 # The $output program cannot be directly executed until all the libtool
 # libraries that it depends on are installed.
 #
 # This wrapper script should never be moved out of the build directory.
 # If it is, it will not operate correctly.
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
 Xsed='${SED} -e 1s/^X//'
 sed_quote_subst='$sed_quote_subst'
 
 # Be Bourne compatible
 if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
   # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '\${1+\"\$@\"}'='\"\$@\"'
   setopt NO_GLOB_SUBST
 else
   case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
 fi
 BIN_SH=xpg4; export BIN_SH # for Tru64
 DUALCASE=1; export DUALCASE # for MKS sh
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 relink_command=\"$relink_command\"
 
 # This environment variable determines our operation mode.
 if test \"\$libtool_install_magic\" = \"$magic\"; then
   # install mode needs the following variables:
   generated_by_libtool_version='$macro_version'
   notinst_deplibs='$notinst_deplibs'
 else
   # When we are sourced in execute mode, \$file and \$ECHO are already set.
   if test \"\$libtool_execute_magic\" != \"$magic\"; then
     ECHO=\"$qecho\"
     file=\"\$0\"
     # Make sure echo works.
     if test \"X\$1\" = X--no-reexec; then
       # Discard the --no-reexec flag, and continue.
       shift
     elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
       # Yippee, \$ECHO works!
       :
     else
       # Restart under the correct shell, and then maybe \$ECHO will work.
       exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
     fi
   fi\
 "
 	$ECHO "\
 
   # Find the directory that this script lives in.
   thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
   test \"x\$thisdir\" = \"x\$file\" && thisdir=.
 
   # Follow symbolic links until we get to the real thisdir.
   file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
   while test -n \"\$file\"; do
     destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
 
     # If there was a directory component, then change thisdir.
     if test \"x\$destdir\" != \"x\$file\"; then
       case \"\$destdir\" in
       [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
       *) thisdir=\"\$thisdir/\$destdir\" ;;
       esac
     fi
 
     file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
     file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
   done
 "
 }
 # end: func_emit_wrapper_part1
 
 # func_emit_wrapper_part2 [arg=no]
 #
 # Emit the second part of a libtool wrapper script on stdout.
 # For more information, see the description associated with
 # func_emit_wrapper(), below.
 func_emit_wrapper_part2 ()
 {
 	func_emit_wrapper_part2_arg1=no
 	if test -n "$1" ; then
 	  func_emit_wrapper_part2_arg1=$1
 	fi
 
 	$ECHO "\
 
   # Usually 'no', except on cygwin/mingw when embedded into
   # the cwrapper.
   WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
   if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
     # special case for '.'
     if test \"\$thisdir\" = \".\"; then
       thisdir=\`pwd\`
     fi
     # remove .libs from thisdir
     case \"\$thisdir\" in
     *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
     $objdir )   thisdir=. ;;
     esac
   fi
 
   # Try to get the absolute directory name.
   absdir=\`cd \"\$thisdir\" && pwd\`
   test -n \"\$absdir\" && thisdir=\"\$absdir\"
 "
 
 	if test "$fast_install" = yes; then
 	  $ECHO "\
   program=lt-'$outputname'$exeext
   progdir=\"\$thisdir/$objdir\"
 
   if test ! -f \"\$progdir/\$program\" ||
      { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
        test \"X\$file\" != \"X\$progdir/\$program\"; }; then
 
     file=\"\$\$-\$program\"
 
     if test ! -d \"\$progdir\"; then
       $MKDIR \"\$progdir\"
     else
       $RM \"\$progdir/\$file\"
     fi"
 
 	  $ECHO "\
 
     # relink executable if necessary
     if test -n \"\$relink_command\"; then
       if relink_command_output=\`eval \$relink_command 2>&1\`; then :
       else
 	$ECHO \"\$relink_command_output\" >&2
 	$RM \"\$progdir/\$file\"
 	exit 1
       fi
     fi
 
     $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
     { $RM \"\$progdir/\$program\";
       $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
     $RM \"\$progdir/\$file\"
   fi"
 	else
 	  $ECHO "\
   program='$outputname'
   progdir=\"\$thisdir/$objdir\"
 "
 	fi
 
 	$ECHO "\
 
   if test -f \"\$progdir/\$program\"; then"
 
 	# Export our shlibpath_var if we have one.
 	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
 	  $ECHO "\
     # Add our own library path to $shlibpath_var
     $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
 
     # Some systems cannot cope with colon-terminated $shlibpath_var
     # The second colon is a workaround for a bug in BeOS R4 sed
     $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
 
     export $shlibpath_var
 "
 	fi
 
 	# fixup the dll searchpath if we need to.
 	if test -n "$dllsearchpath"; then
 	  $ECHO "\
     # Add the dll search path components to the executable PATH
     PATH=$dllsearchpath:\$PATH
 "
 	fi
 
 	$ECHO "\
     if test \"\$libtool_execute_magic\" != \"$magic\"; then
       # Run the actual program with our arguments.
 "
 	case $host in
 	# Backslashes separate directories on plain windows
 	*-*-mingw | *-*-os2* | *-cegcc*)
 	  $ECHO "\
       exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
 "
 	  ;;
 
 	*)
 	  $ECHO "\
       exec \"\$progdir/\$program\" \${1+\"\$@\"}
 "
 	  ;;
 	esac
 	$ECHO "\
       \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
       exit 1
     fi
   else
     # The program doesn't exist.
     \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
     \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
     $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
     exit 1
   fi
 fi\
 "
 }
 # end: func_emit_wrapper_part2
 
 
 # func_emit_wrapper [arg=no]
 #
 # Emit a libtool wrapper script on stdout.
 # Don't directly open a file because we may want to
 # incorporate the script contents within a cygwin/mingw
 # wrapper executable.  Must ONLY be called from within
 # func_mode_link because it depends on a number of variables
 # set therein.
 #
 # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
 # variable will take.  If 'yes', then the emitted script
 # will assume that the directory in which it is stored is
 # the $objdir directory.  This is a cygwin/mingw-specific
 # behavior.
 func_emit_wrapper ()
 {
 	func_emit_wrapper_arg1=no
 	if test -n "$1" ; then
 	  func_emit_wrapper_arg1=$1
 	fi
 
 	# split this up so that func_emit_cwrapperexe_src
 	# can call each part independently.
 	func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
 	func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
 }
 
 
 # func_to_host_path arg
 #
 # Convert paths to host format when used with build tools.
 # Intended for use with "native" mingw (where libtool itself
 # is running under the msys shell), or in the following cross-
 # build environments:
 #    $build          $host
 #    mingw (msys)    mingw  [e.g. native]
 #    cygwin          mingw
 #    *nix + wine     mingw
 # where wine is equipped with the `winepath' executable.
 # In the native mingw case, the (msys) shell automatically
 # converts paths for any non-msys applications it launches,
 # but that facility isn't available from inside the cwrapper.
 # Similar accommodations are necessary for $host mingw and
 # $build cygwin.  Calling this function does no harm for other
 # $host/$build combinations not listed above.
 #
 # ARG is the path (on $build) that should be converted to
 # the proper representation for $host. The result is stored
 # in $func_to_host_path_result.
 func_to_host_path ()
 {
   func_to_host_path_result="$1"
   if test -n "$1" ; then
     case $host in
       *mingw* )
         lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
         case $build in
           *mingw* ) # actually, msys
             # awkward: cmd appends spaces to result
             lt_sed_strip_trailing_spaces="s/[ ]*\$//"
             func_to_host_path_tmp1=`( cmd //c echo "$1" |\
               $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
             func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
               $SED -e "$lt_sed_naive_backslashify"`
             ;;
           *cygwin* )
             func_to_host_path_tmp1=`cygpath -w "$1"`
             func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
               $SED -e "$lt_sed_naive_backslashify"`
             ;;
           * )
             # Unfortunately, winepath does not exit with a non-zero
             # error code, so we are forced to check the contents of
             # stdout. On the other hand, if the command is not
             # found, the shell will set an exit code of 127 and print
             # *an error message* to stdout. So we must check for both
             # error code of zero AND non-empty stdout, which explains
             # the odd construction:
             func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
             if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
               func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
                 $SED -e "$lt_sed_naive_backslashify"`
             else
               # Allow warning below.
               func_to_host_path_result=""
             fi
             ;;
         esac
         if test -z "$func_to_host_path_result" ; then
           func_error "Could not determine host path corresponding to"
           func_error "  '$1'"
           func_error "Continuing, but uninstalled executables may not work."
           # Fallback:
           func_to_host_path_result="$1"
         fi
         ;;
     esac
   fi
 }
 # end: func_to_host_path
 
 # func_to_host_pathlist arg
 #
 # Convert pathlists to host format when used with build tools.
 # See func_to_host_path(), above. This function supports the
 # following $build/$host combinations (but does no harm for
 # combinations not listed here):
 #    $build          $host
 #    mingw (msys)    mingw  [e.g. native]
 #    cygwin          mingw
 #    *nix + wine     mingw
 #
 # Path separators are also converted from $build format to
 # $host format. If ARG begins or ends with a path separator
 # character, it is preserved (but converted to $host format)
 # on output.
 #
 # ARG is a pathlist (on $build) that should be converted to
 # the proper representation on $host. The result is stored
 # in $func_to_host_pathlist_result.
 func_to_host_pathlist ()
 {
   func_to_host_pathlist_result="$1"
   if test -n "$1" ; then
     case $host in
       *mingw* )
         lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
         # Remove leading and trailing path separator characters from
         # ARG. msys behavior is inconsistent here, cygpath turns them
         # into '.;' and ';.', and winepath ignores them completely.
         func_to_host_pathlist_tmp2="$1"
         # Once set for this call, this variable should not be
         # reassigned. It is used in tha fallback case.
         func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
           $SED -e 's|^:*||' -e 's|:*$||'`
         case $build in
           *mingw* ) # Actually, msys.
             # Awkward: cmd appends spaces to result.
             lt_sed_strip_trailing_spaces="s/[ ]*\$//"
             func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
               $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
             func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
               $SED -e "$lt_sed_naive_backslashify"`
             ;;
           *cygwin* )
             func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
             func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
               $SED -e "$lt_sed_naive_backslashify"`
             ;;
           * )
             # unfortunately, winepath doesn't convert pathlists
             func_to_host_pathlist_result=""
             func_to_host_pathlist_oldIFS=$IFS
             IFS=:
             for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
               IFS=$func_to_host_pathlist_oldIFS
               if test -n "$func_to_host_pathlist_f" ; then
                 func_to_host_path "$func_to_host_pathlist_f"
                 if test -n "$func_to_host_path_result" ; then
                   if test -z "$func_to_host_pathlist_result" ; then
                     func_to_host_pathlist_result="$func_to_host_path_result"
                   else
                     func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
                   fi
                 fi
               fi
               IFS=:
             done
             IFS=$func_to_host_pathlist_oldIFS
             ;;
         esac
         if test -z "$func_to_host_pathlist_result" ; then
           func_error "Could not determine the host path(s) corresponding to"
           func_error "  '$1'"
           func_error "Continuing, but uninstalled executables may not work."
           # Fallback. This may break if $1 contains DOS-style drive
           # specifications. The fix is not to complicate the expression
           # below, but for the user to provide a working wine installation
           # with winepath so that path translation in the cross-to-mingw
           # case works properly.
           lt_replace_pathsep_nix_to_dos="s|:|;|g"
           func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
             $SED -e "$lt_replace_pathsep_nix_to_dos"`
         fi
         # Now, add the leading and trailing path separators back
         case "$1" in
           :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
             ;;
         esac
         case "$1" in
           *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
             ;;
         esac
         ;;
     esac
   fi
 }
 # end: func_to_host_pathlist
 
 # func_emit_cwrapperexe_src
 # emit the source code for a wrapper executable on stdout
 # Must ONLY be called from within func_mode_link because
 # it depends on a number of variable set therein.
 func_emit_cwrapperexe_src ()
 {
 	cat <<EOF
 
 /* $cwrappersource - temporary wrapper executable for $objdir/$outputname
    Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
 
    The $output program cannot be directly executed until all the libtool
    libraries that it depends on are installed.
 
    This wrapper executable should never be moved out of the build directory.
    If it is, it will not operate correctly.
 
    Currently, it simply execs the wrapper *script* "$SHELL $output",
    but could eventually absorb all of the scripts functionality and
    exec $objdir/$outputname directly.
 */
 EOF
 	    cat <<"EOF"
 #include <stdio.h>
 #include <stdlib.h>
 #ifdef _MSC_VER
 # include <direct.h>
 # include <process.h>
 # include <io.h>
 # define setmode _setmode
 #else
 # include <unistd.h>
 # include <stdint.h>
 # ifdef __CYGWIN__
 #  include <io.h>
 #  define HAVE_SETENV
 #  ifdef __STRICT_ANSI__
 char *realpath (const char *, char *);
 int putenv (char *);
 int setenv (const char *, const char *, int);
 #  endif
 # endif
 #endif
 #include <malloc.h>
 #include <stdarg.h>
 #include <assert.h>
 #include <string.h>
 #include <ctype.h>
 #include <errno.h>
 #include <fcntl.h>
 #include <sys/stat.h>
 
 #if defined(PATH_MAX)
 # define LT_PATHMAX PATH_MAX
 #elif defined(MAXPATHLEN)
 # define LT_PATHMAX MAXPATHLEN
 #else
 # define LT_PATHMAX 1024
 #endif
 
 #ifndef S_IXOTH
 # define S_IXOTH 0
 #endif
 #ifndef S_IXGRP
 # define S_IXGRP 0
 #endif
 
 #ifdef _MSC_VER
 # define S_IXUSR _S_IEXEC
 # define stat _stat
 # ifndef _INTPTR_T_DEFINED
 #  define intptr_t int
 # endif
 #endif
 
 #ifndef DIR_SEPARATOR
 # define DIR_SEPARATOR '/'
 # define PATH_SEPARATOR ':'
 #endif
 
 #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
   defined (__OS2__)
 # define HAVE_DOS_BASED_FILE_SYSTEM
 # define FOPEN_WB "wb"
 # ifndef DIR_SEPARATOR_2
 #  define DIR_SEPARATOR_2 '\\'
 # endif
 # ifndef PATH_SEPARATOR_2
 #  define PATH_SEPARATOR_2 ';'
 # endif
 #endif
 
 #ifndef DIR_SEPARATOR_2
 # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
 #else /* DIR_SEPARATOR_2 */
 # define IS_DIR_SEPARATOR(ch) \
 	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
 #endif /* DIR_SEPARATOR_2 */
 
 #ifndef PATH_SEPARATOR_2
 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
 #else /* PATH_SEPARATOR_2 */
 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
 #endif /* PATH_SEPARATOR_2 */
 
 #ifdef __CYGWIN__
 # define FOPEN_WB "wb"
 #endif
 
 #ifndef FOPEN_WB
 # define FOPEN_WB "w"
 #endif
 #ifndef _O_BINARY
 # define _O_BINARY 0
 #endif
 
 #define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
 #define XFREE(stale) do { \
   if (stale) { free ((void *) stale); stale = 0; } \
 } while (0)
 
 #undef LTWRAPPER_DEBUGPRINTF
 #if defined DEBUGWRAPPER
 # define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
 static void
 ltwrapper_debugprintf (const char *fmt, ...)
 {
     va_list args;
     va_start (args, fmt);
     (void) vfprintf (stderr, fmt, args);
     va_end (args);
 }
 #else
 # define LTWRAPPER_DEBUGPRINTF(args)
 #endif
 
 const char *program_name = NULL;
 
 void *xmalloc (size_t num);
 char *xstrdup (const char *string);
 const char *base_name (const char *name);
 char *find_executable (const char *wrapper);
 char *chase_symlinks (const char *pathspec);
 int make_executable (const char *path);
 int check_executable (const char *path);
 char *strendzap (char *str, const char *pat);
 void lt_fatal (const char *message, ...);
 void lt_setenv (const char *name, const char *value);
 char *lt_extend_str (const char *orig_value, const char *add, int to_end);
 void lt_opt_process_env_set (const char *arg);
 void lt_opt_process_env_prepend (const char *arg);
 void lt_opt_process_env_append (const char *arg);
 int lt_split_name_value (const char *arg, char** name, char** value);
 void lt_update_exe_path (const char *name, const char *value);
 void lt_update_lib_path (const char *name, const char *value);
 
 static const char *script_text_part1 =
 EOF
 
 	    func_emit_wrapper_part1 yes |
 	        $SED -e 's/\([\\"]\)/\\\1/g' \
 	             -e 's/^/  "/' -e 's/$/\\n"/'
 	    echo ";"
 	    cat <<EOF
 
 static const char *script_text_part2 =
 EOF
 	    func_emit_wrapper_part2 yes |
 	        $SED -e 's/\([\\"]\)/\\\1/g' \
 	             -e 's/^/  "/' -e 's/$/\\n"/'
 	    echo ";"
 
 	    cat <<EOF
 const char * MAGIC_EXE = "$magic_exe";
 const char * LIB_PATH_VARNAME = "$shlibpath_var";
 EOF
 
 	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
               func_to_host_pathlist "$temp_rpath"
 	      cat <<EOF
 const char * LIB_PATH_VALUE   = "$func_to_host_pathlist_result";
 EOF
 	    else
 	      cat <<"EOF"
 const char * LIB_PATH_VALUE   = "";
 EOF
 	    fi
 
 	    if test -n "$dllsearchpath"; then
               func_to_host_pathlist "$dllsearchpath:"
 	      cat <<EOF
 const char * EXE_PATH_VARNAME = "PATH";
 const char * EXE_PATH_VALUE   = "$func_to_host_pathlist_result";
 EOF
 	    else
 	      cat <<"EOF"
 const char * EXE_PATH_VARNAME = "";
 const char * EXE_PATH_VALUE   = "";
 EOF
 	    fi
 
 	    if test "$fast_install" = yes; then
 	      cat <<EOF
 const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
 EOF
 	    else
 	      cat <<EOF
 const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
 EOF
 	    fi
 
 
 	    cat <<"EOF"
 
 #define LTWRAPPER_OPTION_PREFIX         "--lt-"
 #define LTWRAPPER_OPTION_PREFIX_LENGTH  5
 
 static const size_t opt_prefix_len         = LTWRAPPER_OPTION_PREFIX_LENGTH;
 static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
 
 static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
 
 static const size_t env_set_opt_len     = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
 static const char *env_set_opt          = LTWRAPPER_OPTION_PREFIX "env-set";
   /* argument is putenv-style "foo=bar", value of foo is set to bar */
 
 static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
 static const char *env_prepend_opt      = LTWRAPPER_OPTION_PREFIX "env-prepend";
   /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
 
 static const size_t env_append_opt_len  = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
 static const char *env_append_opt       = LTWRAPPER_OPTION_PREFIX "env-append";
   /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
 
 int
 main (int argc, char *argv[])
 {
   char **newargz;
   int  newargc;
   char *tmp_pathspec;
   char *actual_cwrapper_path;
   char *actual_cwrapper_name;
   char *target_name;
   char *lt_argv_zero;
   intptr_t rval = 127;
 
   int i;
 
   program_name = (char *) xstrdup (base_name (argv[0]));
   LTWRAPPER_DEBUGPRINTF (("(main) argv[0]      : %s\n", argv[0]));
   LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
 
   /* very simple arg parsing; don't want to rely on getopt */
   for (i = 1; i < argc; i++)
     {
       if (strcmp (argv[i], dumpscript_opt) == 0)
 	{
 EOF
 	    case "$host" in
 	      *mingw* | *cygwin* )
 		# make stdout use "unix" line endings
 		echo "          setmode(1,_O_BINARY);"
 		;;
 	      esac
 
 	    cat <<"EOF"
 	  printf ("%s", script_text_part1);
 	  printf ("%s", script_text_part2);
 	  return 0;
 	}
     }
 
   newargz = XMALLOC (char *, argc + 1);
   tmp_pathspec = find_executable (argv[0]);
   if (tmp_pathspec == NULL)
     lt_fatal ("Couldn't find %s", argv[0]);
   LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
 			  tmp_pathspec));
 
   actual_cwrapper_path = chase_symlinks (tmp_pathspec);
   LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
 			  actual_cwrapper_path));
   XFREE (tmp_pathspec);
 
   actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
   strendzap (actual_cwrapper_path, actual_cwrapper_name);
 
   /* wrapper name transforms */
   strendzap (actual_cwrapper_name, ".exe");
   tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
   XFREE (actual_cwrapper_name);
   actual_cwrapper_name = tmp_pathspec;
   tmp_pathspec = 0;
 
   /* target_name transforms -- use actual target program name; might have lt- prefix */
   target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
   strendzap (target_name, ".exe");
   tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
   XFREE (target_name);
   target_name = tmp_pathspec;
   tmp_pathspec = 0;
 
   LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
 			  target_name));
 EOF
 
 	    cat <<EOF
   newargz[0] =
     XMALLOC (char, (strlen (actual_cwrapper_path) +
 		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
   strcpy (newargz[0], actual_cwrapper_path);
   strcat (newargz[0], "$objdir");
   strcat (newargz[0], "/");
 EOF
 
 	    cat <<"EOF"
   /* stop here, and copy so we don't have to do this twice */
   tmp_pathspec = xstrdup (newargz[0]);
 
   /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
   strcat (newargz[0], actual_cwrapper_name);
 
   /* DO want the lt- prefix here if it exists, so use target_name */
   lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
   XFREE (tmp_pathspec);
   tmp_pathspec = NULL;
 EOF
 
 	    case $host_os in
 	      mingw*)
 	    cat <<"EOF"
   {
     char* p;
     while ((p = strchr (newargz[0], '\\')) != NULL)
       {
 	*p = '/';
       }
     while ((p = strchr (lt_argv_zero, '\\')) != NULL)
       {
 	*p = '/';
       }
   }
 EOF
 	    ;;
 	    esac
 
 	    cat <<"EOF"
   XFREE (target_name);
   XFREE (actual_cwrapper_path);
   XFREE (actual_cwrapper_name);
 
   lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
   lt_setenv ("DUALCASE", "1");  /* for MSK sh */
   lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
   lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
 
   newargc=0;
   for (i = 1; i < argc; i++)
     {
       if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
         {
           if (argv[i][env_set_opt_len] == '=')
             {
               const char *p = argv[i] + env_set_opt_len + 1;
               lt_opt_process_env_set (p);
             }
           else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
             {
               lt_opt_process_env_set (argv[++i]); /* don't copy */
             }
           else
             lt_fatal ("%s missing required argument", env_set_opt);
           continue;
         }
       if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
         {
           if (argv[i][env_prepend_opt_len] == '=')
             {
               const char *p = argv[i] + env_prepend_opt_len + 1;
               lt_opt_process_env_prepend (p);
             }
           else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
             {
               lt_opt_process_env_prepend (argv[++i]); /* don't copy */
             }
           else
             lt_fatal ("%s missing required argument", env_prepend_opt);
           continue;
         }
       if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
         {
           if (argv[i][env_append_opt_len] == '=')
             {
               const char *p = argv[i] + env_append_opt_len + 1;
               lt_opt_process_env_append (p);
             }
           else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
             {
               lt_opt_process_env_append (argv[++i]); /* don't copy */
             }
           else
             lt_fatal ("%s missing required argument", env_append_opt);
           continue;
         }
       if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
         {
           /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
              namespace, but it is not one of the ones we know about and
              have already dealt with, above (inluding dump-script), then
              report an error. Otherwise, targets might begin to believe
              they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
              namespace. The first time any user complains about this, we'll
              need to make LTWRAPPER_OPTION_PREFIX a configure-time option
              or a configure.ac-settable value.
            */
           lt_fatal ("Unrecognized option in %s namespace: '%s'",
                     ltwrapper_option_prefix, argv[i]);
         }
       /* otherwise ... */
       newargz[++newargc] = xstrdup (argv[i]);
     }
   newargz[++newargc] = NULL;
 
   LTWRAPPER_DEBUGPRINTF     (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
   for (i = 0; i < newargc; i++)
     {
       LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
     }
 
 EOF
 
 	    case $host_os in
 	      mingw*)
 		cat <<"EOF"
   /* execv doesn't actually work on mingw as expected on unix */
   rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
   if (rval == -1)
     {
       /* failed to start process */
       LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
       return 127;
     }
   return rval;
 EOF
 		;;
 	      *)
 		cat <<"EOF"
   execv (lt_argv_zero, newargz);
   return rval; /* =127, but avoids unused variable warning */
 EOF
 		;;
 	    esac
 
 	    cat <<"EOF"
 }
 
 void *
 xmalloc (size_t num)
 {
   void *p = (void *) malloc (num);
   if (!p)
     lt_fatal ("Memory exhausted");
 
   return p;
 }
 
 char *
 xstrdup (const char *string)
 {
   return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
 			  string) : NULL;
 }
 
 const char *
 base_name (const char *name)
 {
   const char *base;
 
 #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
   /* Skip over the disk name in MSDOS pathnames. */
   if (isalpha ((unsigned char) name[0]) && name[1] == ':')
     name += 2;
 #endif
 
   for (base = name; *name; name++)
     if (IS_DIR_SEPARATOR (*name))
       base = name + 1;
   return base;
 }
 
 int
 check_executable (const char *path)
 {
   struct stat st;
 
   LTWRAPPER_DEBUGPRINTF (("(check_executable)  : %s\n",
 			  path ? (*path ? path : "EMPTY!") : "NULL!"));
   if ((!path) || (!*path))
     return 0;
 
   if ((stat (path, &st) >= 0)
       && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
     return 1;
   else
     return 0;
 }
 
 int
 make_executable (const char *path)
 {
   int rval = 0;
   struct stat st;
 
   LTWRAPPER_DEBUGPRINTF (("(make_executable)   : %s\n",
 			  path ? (*path ? path : "EMPTY!") : "NULL!"));
   if ((!path) || (!*path))
     return 0;
 
   if (stat (path, &st) >= 0)
     {
       rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
     }
   return rval;
 }
 
 /* Searches for the full path of the wrapper.  Returns
    newly allocated full path name if found, NULL otherwise
    Does not chase symlinks, even on platforms that support them.
 */
 char *
 find_executable (const char *wrapper)
 {
   int has_slash = 0;
   const char *p;
   const char *p_next;
   /* static buffer for getcwd */
   char tmp[LT_PATHMAX + 1];
   int tmp_len;
   char *concat_name;
 
   LTWRAPPER_DEBUGPRINTF (("(find_executable)   : %s\n",
 			  wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
 
   if ((wrapper == NULL) || (*wrapper == '\0'))
     return NULL;
 
   /* Absolute path? */
 #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
   if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
     {
       concat_name = xstrdup (wrapper);
       if (check_executable (concat_name))
 	return concat_name;
       XFREE (concat_name);
     }
   else
     {
 #endif
       if (IS_DIR_SEPARATOR (wrapper[0]))
 	{
 	  concat_name = xstrdup (wrapper);
 	  if (check_executable (concat_name))
 	    return concat_name;
 	  XFREE (concat_name);
 	}
 #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
     }
 #endif
 
   for (p = wrapper; *p; p++)
     if (*p == '/')
       {
 	has_slash = 1;
 	break;
       }
   if (!has_slash)
     {
       /* no slashes; search PATH */
       const char *path = getenv ("PATH");
       if (path != NULL)
 	{
 	  for (p = path; *p; p = p_next)
 	    {
 	      const char *q;
 	      size_t p_len;
 	      for (q = p; *q; q++)
 		if (IS_PATH_SEPARATOR (*q))
 		  break;
 	      p_len = q - p;
 	      p_next = (*q == '\0' ? q : q + 1);
 	      if (p_len == 0)
 		{
 		  /* empty path: current directory */
 		  if (getcwd (tmp, LT_PATHMAX) == NULL)
 		    lt_fatal ("getcwd failed");
 		  tmp_len = strlen (tmp);
 		  concat_name =
 		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
 		  memcpy (concat_name, tmp, tmp_len);
 		  concat_name[tmp_len] = '/';
 		  strcpy (concat_name + tmp_len + 1, wrapper);
 		}
 	      else
 		{
 		  concat_name =
 		    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
 		  memcpy (concat_name, p, p_len);
 		  concat_name[p_len] = '/';
 		  strcpy (concat_name + p_len + 1, wrapper);
 		}
 	      if (check_executable (concat_name))
 		return concat_name;
 	      XFREE (concat_name);
 	    }
 	}
       /* not found in PATH; assume curdir */
     }
   /* Relative path | not found in path: prepend cwd */
   if (getcwd (tmp, LT_PATHMAX) == NULL)
     lt_fatal ("getcwd failed");
   tmp_len = strlen (tmp);
   concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
   memcpy (concat_name, tmp, tmp_len);
   concat_name[tmp_len] = '/';
   strcpy (concat_name + tmp_len + 1, wrapper);

   if (check_executable (concat_name))
     return concat_name;
   XFREE (concat_name);
   return NULL;
 }
 
 char *
 chase_symlinks (const char *pathspec)
 {
 #ifndef S_ISLNK
   return xstrdup (pathspec);
 #else
   char buf[LT_PATHMAX];
   struct stat s;
   char *tmp_pathspec = xstrdup (pathspec);
   char *p;
   int has_symlinks = 0;
   while (strlen (tmp_pathspec) && !has_symlinks)
     {
       LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
 			      tmp_pathspec));
       if (lstat (tmp_pathspec, &s) == 0)
 	{
 	  if (S_ISLNK (s.st_mode) != 0)
 	    {
 	      has_symlinks = 1;
 	      break;
 	    }
 
 	  /* search backwards for last DIR_SEPARATOR */
 	  p = tmp_pathspec + strlen (tmp_pathspec) - 1;
 	  while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
 	    p--;
 	  if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
 	    {
 	      /* no more DIR_SEPARATORS left */
 	      break;
 	    }
 	  *p = '\0';
 	}
       else
 	{
 	  char *errstr = strerror (errno);
 	  lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
 	}
     }
   XFREE (tmp_pathspec);
 
   if (!has_symlinks)
     {
       return xstrdup (pathspec);
     }
 
   tmp_pathspec = realpath (pathspec, buf);
   if (tmp_pathspec == 0)
     {
       lt_fatal ("Could not follow symlinks for %s", pathspec);
     }
   return xstrdup (tmp_pathspec);
 #endif
 }
 
 char *
 strendzap (char *str, const char *pat)
 {
   size_t len, patlen;
 
   assert (str != NULL);
   assert (pat != NULL);
 
   len = strlen (str);
   patlen = strlen (pat);
 
   if (patlen <= len)
     {
       str += len - patlen;
       if (strcmp (str, pat) == 0)
 	*str = '\0';
     }
   return str;
 }
 
 static void
 lt_error_core (int exit_status, const char *mode,
 	       const char *message, va_list ap)
 {
   fprintf (stderr, "%s: %s: ", program_name, mode);
   vfprintf (stderr, message, ap);
   fprintf (stderr, ".\n");
 
   if (exit_status >= 0)
     exit (exit_status);
 }
 
 void
 lt_fatal (const char *message, ...)
 {
   va_list ap;
   va_start (ap, message);
   lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
   va_end (ap);
 }
 
 void
 lt_setenv (const char *name, const char *value)
 {
   LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
                           (name ? name : "<NULL>"),
                           (value ? value : "<NULL>")));
   {
 #ifdef HAVE_SETENV
     /* always make a copy, for consistency with !HAVE_SETENV */
     char *str = xstrdup (value);
     setenv (name, str, 1);
 #else
     int len = strlen (name) + 1 + strlen (value) + 1;
     char *str = XMALLOC (char, len);
     sprintf (str, "%s=%s", name, value);
     if (putenv (str) != EXIT_SUCCESS)
       {
         XFREE (str);
       }
 #endif
   }
 }
 
 char *
 lt_extend_str (const char *orig_value, const char *add, int to_end)
 {
   char *new_value;
   if (orig_value && *orig_value)
     {
       int orig_value_len = strlen (orig_value);
       int add_len = strlen (add);
       new_value = XMALLOC (char, add_len + orig_value_len + 1);
       if (to_end)
         {
           strcpy (new_value, orig_value);
           strcpy (new_value + orig_value_len, add);
         }
       else
         {
           strcpy (new_value, add);
           strcpy (new_value + add_len, orig_value);
         }
     }
   else
     {
       new_value = xstrdup (add);
     }
   return new_value;
 }
 
 int
 lt_split_name_value (const char *arg, char** name, char** value)
 {
   const char *p;
   int len;
   if (!arg || !*arg)
     return 1;
 
   p = strchr (arg, (int)'=');
 
   if (!p)
     return 1;
 
   *value = xstrdup (++p);
 
   len = strlen (arg) - strlen (*value);
   *name = XMALLOC (char, len);
   strncpy (*name, arg, len-1);
   (*name)[len - 1] = '\0';
 
   return 0;
 }
 
 void
 lt_opt_process_env_set (const char *arg)
 {
   char *name = NULL;
   char *value = NULL;
 
   if (lt_split_name_value (arg, &name, &value) != 0)
     {
       XFREE (name);
       XFREE (value);
       lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
     }
 
   lt_setenv (name, value);
   XFREE (name);
   XFREE (value);
 }
 
 void
 lt_opt_process_env_prepend (const char *arg)
 {
   char *name = NULL;
   char *value = NULL;
   char *new_value = NULL;
 
   if (lt_split_name_value (arg, &name, &value) != 0)
     {
       XFREE (name);
       XFREE (value);
       lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
     }
 
   new_value = lt_extend_str (getenv (name), value, 0);
   lt_setenv (name, new_value);
   XFREE (new_value);
   XFREE (name);
   XFREE (value);
 }
 
 void
 lt_opt_process_env_append (const char *arg)
 {
   char *name = NULL;
   char *value = NULL;
   char *new_value = NULL;
 
   if (lt_split_name_value (arg, &name, &value) != 0)
     {
       XFREE (name);
       XFREE (value);
       lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
     }
 
   new_value = lt_extend_str (getenv (name), value, 1);
   lt_setenv (name, new_value);
   XFREE (new_value);
   XFREE (name);
   XFREE (value);
 }
 
 void
 lt_update_exe_path (const char *name, const char *value)
 {
   LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
                           (name ? name : "<NULL>"),
                           (value ? value : "<NULL>")));
 
   if (name && *name && value && *value)
     {
       char *new_value = lt_extend_str (getenv (name), value, 0);
       /* some systems can't cope with a ':'-terminated path #' */
       int len = strlen (new_value);
       while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
         {
           new_value[len-1] = '\0';
         }
       lt_setenv (name, new_value);
       XFREE (new_value);
     }
 }
 
 void
 lt_update_lib_path (const char *name, const char *value)
 {
   LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
                           (name ? name : "<NULL>"),
                           (value ? value : "<NULL>")));
 
   if (name && *name && value && *value)
     {
       char *new_value = lt_extend_str (getenv (name), value, 0);
       lt_setenv (name, new_value);
       XFREE (new_value);
     }
 }
 
 
 EOF
 }
 # end: func_emit_cwrapperexe_src
 
 # func_mode_link arg...
 func_mode_link ()
 {
     $opt_debug

     case $host in

     *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)

       # It is impossible to link a dll without this setting, and
       # we shouldn't force the makefile maintainer to figure out
       # which system we are compiling for in order to pass an extra
       # flag for every libtool invocation.
       # allow_undefined=no
 
       # FIXME: Unfortunately, there are problems with the above when trying
       # to make a dll which has undefined symbols, in which case not
       # even a static library is built.  For now, we need to specify
       # -no-undefined on the libtool link line when we can be certain
       # that all symbols are satisfied, otherwise we get a static library.
       allow_undefined=yes
       ;;
     *)
       allow_undefined=yes
       ;;
     esac

     libtool_args=$nonopt

     base_compile="$nonopt $@"

     compile_command=$nonopt
     finalize_command=$nonopt

 
     compile_rpath=
     finalize_rpath=
     compile_shlibpath=
     finalize_shlibpath=
     convenience=
     old_convenience=
     deplibs=
     old_deplibs=
     compiler_flags=
     linker_flags=
     dllsearchpath=
     lib_search_path=`pwd`
     inst_prefix_dir=

     new_inherited_linker_flags=

 
     avoid_version=no
     dlfiles=
     dlprefiles=
     dlself=no
     export_dynamic=no
     export_symbols=
     export_symbols_regex=
     generated=
     libobjs=
     ltlibs=
     module=no
     no_install=no
     objs=
     non_pic_objects=
     precious_files_regex=
     prefer_static_libs=no
     preload=no
     prev=
     prevarg=
     release=
     rpath=
     xrpath=
     perm_rpath=
     temp_rpath=
     thread_safe=no
     vinfo=
     vinfo_number=no

     weak_libs=

     single_module="${wl}-single_module"

     func_infer_tag $base_compile
 
     # We need to know -static, to get the right output filenames.
     for arg
     do
       case $arg in

       -shared)
 	test "$build_libtool_libs" != yes && \
 	  func_fatal_configuration "can not build a shared library"
 	build_old_libs=no
 	break
 	;;

       -all-static | -static | -static-libtool-libs)
 	case $arg in
 	-all-static)

 	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then

 	    func_warning "complete static linking is impossible in this configuration"

 	  fi
 	  if test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
 	  fi
 	  prefer_static_libs=yes

 	  ;;
 	-static)

 	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
 	  fi
 	  prefer_static_libs=built

 	  ;;
 	-static-libtool-libs)
 	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
 	  fi
 	  prefer_static_libs=yes
 	  ;;
 	esac

 	build_libtool_libs=no
 	build_old_libs=yes
 	break
 	;;
       esac
     done
 
     # See if our shared archives depend on static archives.
     test -n "$old_archive_from_new_cmds" && build_old_libs=yes
 
     # Go through the arguments, transforming them on the way.
     while test "$#" -gt 0; do
       arg="$1"
       shift

       func_quote_for_eval "$arg"
       qarg=$func_quote_for_eval_unquoted_result
       func_append libtool_args " $func_quote_for_eval_result"

 
       # If the previous option needs an argument, assign it.
       if test -n "$prev"; then
 	case $prev in
 	output)

 	  func_append compile_command " @OUTPUT@"
 	  func_append finalize_command " @OUTPUT@"

 	  ;;
 	esac
 
 	case $prev in
 	dlfiles|dlprefiles)
 	  if test "$preload" = no; then
 	    # Add the symbol object into the linking commands.

 	    func_append compile_command " @SYMFILE@"
 	    func_append finalize_command " @SYMFILE@"

 	    preload=yes
 	  fi
 	  case $arg in
 	  *.la | *.lo) ;;  # We handle these cases below.
 	  force)
 	    if test "$dlself" = no; then
 	      dlself=needless
 	      export_dynamic=yes
 	    fi
 	    prev=
 	    continue
 	    ;;
 	  self)
 	    if test "$prev" = dlprefiles; then
 	      dlself=yes
 	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
 	      dlself=yes
 	    else
 	      dlself=needless
 	      export_dynamic=yes
 	    fi
 	    prev=
 	    continue
 	    ;;
 	  *)
 	    if test "$prev" = dlfiles; then
 	      dlfiles="$dlfiles $arg"
 	    else
 	      dlprefiles="$dlprefiles $arg"
 	    fi
 	    prev=
 	    continue
 	    ;;
 	  esac
 	  ;;
 	expsyms)
 	  export_symbols="$arg"

 	  test -f "$arg" \
 	    || func_fatal_error "symbol file \`$arg' does not exist"

 	  prev=
 	  continue
 	  ;;
 	expsyms_regex)
 	  export_symbols_regex="$arg"
 	  prev=
 	  continue
 	  ;;

 	framework)
 	  case $host in
 	    *-*-darwin*)
 	      case "$deplibs " in
 		*" $qarg.ltframework "*) ;;
 		*) deplibs="$deplibs $qarg.ltframework" # this is fixed later
 		   ;;
 	      esac
 	      ;;
 	  esac

 	  prev=
 	  continue
 	  ;;

 	inst_prefix)
 	  inst_prefix_dir="$arg"

 	  prev=
 	  continue
 	  ;;
 	objectlist)
 	  if test -f "$arg"; then
 	    save_arg=$arg
 	    moreargs=

 	    for fil in `cat "$save_arg"`

 	    do
 #	      moreargs="$moreargs $fil"
 	      arg=$fil
 	      # A libtool-controlled object.
 
 	      # Check to see that this really is a libtool object.

 	      if func_lalib_unsafe_p "$arg"; then

 		pic_object=
 		non_pic_object=
 
 		# Read the .lo file

 		func_source "$arg"

 		if test -z "$pic_object" ||

 		   test -z "$non_pic_object" ||

 		   test "$pic_object" = none &&

 		   test "$non_pic_object" = none; then

 		  func_fatal_error "cannot find name of object for \`$arg'"

 		fi
 
 		# Extract subdirectory from the argument.

 		func_dirname "$arg" "/" ""
 		xdir="$func_dirname_result"

 
 		if test "$pic_object" != none; then
 		  # Prepend the subdirectory the object is found in.
 		  pic_object="$xdir$pic_object"
 
 		  if test "$prev" = dlfiles; then
 		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
 		      dlfiles="$dlfiles $pic_object"
 		      prev=
 		      continue
 		    else
 		      # If libtool objects are unsupported, then we need to preload.
 		      prev=dlprefiles
 		    fi
 		  fi
 
 		  # CHECK ME:  I think I busted this.  -Ossama
 		  if test "$prev" = dlprefiles; then
 		    # Preload the old-style object.
 		    dlprefiles="$dlprefiles $pic_object"
 		    prev=
 		  fi
 
 		  # A PIC object.

 		  func_append libobjs " $pic_object"

 		  arg="$pic_object"
 		fi
 
 		# Non-PIC object.
 		if test "$non_pic_object" != none; then
 		  # Prepend the subdirectory the object is found in.
 		  non_pic_object="$xdir$non_pic_object"
 
 		  # A standard non-PIC object

 		  func_append non_pic_objects " $non_pic_object"

 		  if test -z "$pic_object" || test "$pic_object" = none ; then
 		    arg="$non_pic_object"
 		  fi
 		else
 		  # If the PIC object exists, use it instead.
 		  # $xdir was prepended to $pic_object above.
 		  non_pic_object="$pic_object"

 		  func_append non_pic_objects " $non_pic_object"

 		fi
 	      else
 		# Only an error if not doing a dry-run.

 		if $opt_dry_run; then

 		  # Extract subdirectory from the argument.

 		  func_dirname "$arg" "/" ""
 		  xdir="$func_dirname_result"
 
 		  func_lo2o "$arg"
 		  pic_object=$xdir$objdir/$func_lo2o_result
 		  non_pic_object=$xdir$func_lo2o_result
 		  func_append libobjs " $pic_object"
 		  func_append non_pic_objects " $non_pic_object"
 	        else
 		  func_fatal_error "\`$arg' is not a valid libtool object"

 		fi
 	      fi
 	    done
 	  else

 	    func_fatal_error "link input file \`$arg' does not exist"

 	  fi
 	  arg=$save_arg
 	  prev=
 	  continue
 	  ;;

 	precious_regex)
 	  precious_files_regex="$arg"
 	  prev=
 	  continue
 	  ;;
 	release)
 	  release="-$arg"
 	  prev=
 	  continue
 	  ;;

 	rpath | xrpath)
 	  # We need an absolute path.
 	  case $arg in
 	  [\\/]* | [A-Za-z]:[\\/]*) ;;
 	  *)

 	    func_fatal_error "only absolute run-paths are allowed"

 	    ;;
 	  esac
 	  if test "$prev" = rpath; then
 	    case "$rpath " in
 	    *" $arg "*) ;;
 	    *) rpath="$rpath $arg" ;;
 	    esac
 	  else
 	    case "$xrpath " in
 	    *" $arg "*) ;;
 	    *) xrpath="$xrpath $arg" ;;
 	    esac
 	  fi
 	  prev=
 	  continue
 	  ;;

 	shrext)
 	  shrext_cmds="$arg"

 	  prev=
 	  continue
 	  ;;

 	weak)
 	  weak_libs="$weak_libs $arg"

 	  prev=
 	  continue
 	  ;;
 	xcclinker)
 	  linker_flags="$linker_flags $qarg"
 	  compiler_flags="$compiler_flags $qarg"
 	  prev=

 	  func_append compile_command " $qarg"
 	  func_append finalize_command " $qarg"

 	  continue
 	  ;;

 	xcompiler)
 	  compiler_flags="$compiler_flags $qarg"

 	  prev=

 	  func_append compile_command " $qarg"
 	  func_append finalize_command " $qarg"

 	  continue
 	  ;;

 	xlinker)
 	  linker_flags="$linker_flags $qarg"
 	  compiler_flags="$compiler_flags $wl$qarg"

 	  prev=

 	  func_append compile_command " $wl$qarg"
 	  func_append finalize_command " $wl$qarg"

 	  continue
 	  ;;
 	*)
 	  eval "$prev=\"\$arg\""
 	  prev=
 	  continue
 	  ;;
 	esac
       fi # test -n "$prev"
 
       prevarg="$arg"
 
       case $arg in
       -all-static)
 	if test -n "$link_static_flag"; then

 	  # See comment for -static flag below, for more details.
 	  func_append compile_command " $link_static_flag"
 	  func_append finalize_command " $link_static_flag"

 	fi
 	continue
 	;;
 
       -allow-undefined)
 	# FIXME: remove this flag sometime in the future.

 	func_fatal_error "\`-allow-undefined' must not be used because it is the default"

 	;;
 
       -avoid-version)
 	avoid_version=yes
 	continue
 	;;
 
       -dlopen)
 	prev=dlfiles
 	continue
 	;;
 
       -dlpreopen)
 	prev=dlprefiles
 	continue
 	;;
 
       -export-dynamic)
 	export_dynamic=yes
 	continue
 	;;
 
       -export-symbols | -export-symbols-regex)
 	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then

 	  func_fatal_error "more than one -exported-symbols argument is not allowed"

 	fi
 	if test "X$arg" = "X-export-symbols"; then
 	  prev=expsyms
 	else
 	  prev=expsyms_regex
 	fi
 	continue
 	;;
 

       -framework)
 	prev=framework

 	continue
 	;;
 
       -inst-prefix-dir)
 	prev=inst_prefix
 	continue
 	;;
 
       # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
       # so, if we see these flags be careful not to treat them like -L
       -L[A-Z][A-Z]*:*)
 	case $with_gcc/$host in
 	no/*-*-irix* | /*-*-irix*)

 	  func_append compile_command " $arg"
 	  func_append finalize_command " $arg"

 	  ;;
 	esac
 	continue
 	;;
 
       -L*)

 	func_stripname '-L' '' "$arg"
 	dir=$func_stripname_result
 	if test -z "$dir"; then
 	  if test "$#" -gt 0; then
 	    func_fatal_error "require no space between \`-L' and \`$1'"
 	  else
 	    func_fatal_error "need path for \`-L' option"
 	  fi
 	fi

 	# We need an absolute path.
 	case $dir in
 	[\\/]* | [A-Za-z]:[\\/]*) ;;
 	*)
 	  absdir=`cd "$dir" && pwd`

 	  test -z "$absdir" && \
 	    func_fatal_error "cannot determine absolute directory name of \`$dir'"

 	  dir="$absdir"
 	  ;;
 	esac
 	case "$deplibs " in
 	*" -L$dir "*) ;;
 	*)
 	  deplibs="$deplibs -L$dir"
 	  lib_search_path="$lib_search_path $dir"
 	  ;;
 	esac
 	case $host in

 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
 	  testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`

 	  case :$dllsearchpath: in
 	  *":$dir:"*) ;;

 	  ::) dllsearchpath=$dir;;

 	  *) dllsearchpath="$dllsearchpath:$dir";;
 	  esac
 	  case :$dllsearchpath: in
 	  *":$testbindir:"*) ;;

 	  ::) dllsearchpath=$testbindir;;

 	  *) dllsearchpath="$dllsearchpath:$testbindir";;
 	  esac
 	  ;;
 	esac
 	continue
 	;;
 
       -l*)
 	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
 	  case $host in

 	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)

 	    # These systems don't actually have a C or math library (as such)
 	    continue
 	    ;;
 	  *-*-os2*)
 	    # These systems don't actually have a C library (as such)
 	    test "X$arg" = "X-lc" && continue
 	    ;;
 	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
 	    # Do not include libc due to us having libc/libc_r.
 	    test "X$arg" = "X-lc" && continue
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.[012])
 	    # Rhapsody C and math libraries are in the System framework

 	    deplibs="$deplibs System.ltframework"

 	    continue
 	    ;;
 	  *-*-sco3.2v5* | *-*-sco5v6*)
 	    # Causes problems with __ctype
 	    test "X$arg" = "X-lc" && continue
 	    ;;
 	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
 	    # Compiler inserts libc in the correct place for threads to work
 	    test "X$arg" = "X-lc" && continue
 	    ;;
 	  esac
 	elif test "X$arg" = "X-lc_r"; then
 	 case $host in
 	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
 	   # Do not include libc_r directly, use -pthread flag.
 	   continue
 	   ;;
 	 esac
 	fi
 	deplibs="$deplibs $arg"
 	continue
 	;;
 

       -module)
 	module=yes
 	continue
 	;;
 

       # Tru64 UNIX uses -model [arg] to determine the layout of C++
       # classes, name mangling, and exception handling.

       # Darwin uses the -arch flag to determine output architecture.
       -model|-arch|-isysroot)

 	compiler_flags="$compiler_flags $arg"

 	func_append compile_command " $arg"
 	func_append finalize_command " $arg"

 	prev=xcompiler
 	continue
 	;;
 

       -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)

 	compiler_flags="$compiler_flags $arg"

 	func_append compile_command " $arg"
 	func_append finalize_command " $arg"
 	case "$new_inherited_linker_flags " in
 	    *" $arg "*) ;;
 	    * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
 	esac

 	continue
 	;;
 

       -multi_module)
 	single_module="${wl}-multi_module"
 	continue
 	;;
 

       -no-fast-install)
 	fast_install=no
 	continue
 	;;
 
       -no-install)
 	case $host in

 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)

 	  # The PATH hackery in wrapper scripts is required on Windows

 	  # and Darwin in order for the loader to find any dlls it needs.

 	  func_warning "\`-no-install' is ignored for $host"
 	  func_warning "assuming \`-no-fast-install' instead"

 	  fast_install=no
 	  ;;
 	*) no_install=yes ;;
 	esac
 	continue
 	;;
 
       -no-undefined)
 	allow_undefined=no
 	continue
 	;;
 
       -objectlist)
 	prev=objectlist
 	continue
 	;;
 
       -o) prev=output ;;
 
       -precious-files-regex)
 	prev=precious_regex
 	continue
 	;;
 
       -release)
 	prev=release
 	continue
 	;;
 
       -rpath)
 	prev=rpath
 	continue
 	;;
 
       -R)
 	prev=xrpath
 	continue
 	;;
 
       -R*)

 	func_stripname '-R' '' "$arg"
 	dir=$func_stripname_result

 	# We need an absolute path.
 	case $dir in
 	[\\/]* | [A-Za-z]:[\\/]*) ;;
 	*)

 	  func_fatal_error "only absolute run-paths are allowed"

 	  ;;
 	esac
 	case "$xrpath " in
 	*" $dir "*) ;;
 	*) xrpath="$xrpath $dir" ;;
 	esac
 	continue
 	;;
 

       -shared)
 	# The effects of -shared are defined in a previous loop.
 	continue
 	;;
 
       -shrext)
 	prev=shrext
 	continue
 	;;
 

       -static | -static-libtool-libs)

 	# The effects of -static are defined in a previous loop.
 	# We used to do the same as -all-static on platforms that
 	# didn't have a PIC flag, but the assumption that the effects
 	# would be equivalent was wrong.  It would break on at least
 	# Digital Unix and AIX.
 	continue
 	;;
 
       -thread-safe)
 	thread_safe=yes
 	continue
 	;;
 
       -version-info)
 	prev=vinfo
 	continue
 	;;

       -version-number)
 	prev=vinfo
 	vinfo_number=yes
 	continue
 	;;
 

       -weak)
         prev=weak
 	continue
 	;;
 

       -Wc,*)

 	func_stripname '-Wc,' '' "$arg"
 	args=$func_stripname_result

 	arg=
 	save_ifs="$IFS"; IFS=','
 	for flag in $args; do
 	  IFS="$save_ifs"

           func_quote_for_eval "$flag"
 	  arg="$arg $wl$func_quote_for_eval_result"
 	  compiler_flags="$compiler_flags $func_quote_for_eval_result"

 	done
 	IFS="$save_ifs"

 	func_stripname ' ' '' "$arg"
 	arg=$func_stripname_result

 	;;
 
       -Wl,*)

 	func_stripname '-Wl,' '' "$arg"
 	args=$func_stripname_result

 	arg=
 	save_ifs="$IFS"; IFS=','
 	for flag in $args; do
 	  IFS="$save_ifs"

           func_quote_for_eval "$flag"
 	  arg="$arg $wl$func_quote_for_eval_result"
 	  compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
 	  linker_flags="$linker_flags $func_quote_for_eval_result"

 	done
 	IFS="$save_ifs"

 	func_stripname ' ' '' "$arg"
 	arg=$func_stripname_result

 	;;
 
       -Xcompiler)
 	prev=xcompiler
 	continue
 	;;
 
       -Xlinker)
 	prev=xlinker
 	continue
 	;;
 
       -XCClinker)
 	prev=xcclinker
 	continue
 	;;
 

       # -msg_* for osf cc
       -msg_*)
 	func_quote_for_eval "$arg"
 	arg="$func_quote_for_eval_result"
 	;;
 
       # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
       # -r[0-9][0-9]* specifies the processor on the SGI compiler
       # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
       # +DA*, +DD* enable 64-bit mode on the HP compiler
       # -q* pass through compiler args for the IBM compiler
       # -m*, -t[45]*, -txscale* pass through architecture-specific
       # compiler args for GCC
       # -F/path gives path to uninstalled frameworks, gcc on darwin
       # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
       # @file GCC response files
       -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
       -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
         func_quote_for_eval "$arg"
 	arg="$func_quote_for_eval_result"
         func_append compile_command " $arg"
         func_append finalize_command " $arg"
         compiler_flags="$compiler_flags $arg"
         continue
         ;;
 

       # Some other compiler flag.
       -* | +*)

         func_quote_for_eval "$arg"
 	arg="$func_quote_for_eval_result"

 	;;
 
       *.$objext)
 	# A standard object.
 	objs="$objs $arg"
 	;;
 
       *.lo)
 	# A libtool-controlled object.
 
 	# Check to see that this really is a libtool object.

 	if func_lalib_unsafe_p "$arg"; then

 	  pic_object=
 	  non_pic_object=
 
 	  # Read the .lo file

 	  func_source "$arg"

 	  if test -z "$pic_object" ||

 	     test -z "$non_pic_object" ||

 	     test "$pic_object" = none &&

 	     test "$non_pic_object" = none; then

 	    func_fatal_error "cannot find name of object for \`$arg'"

 	  fi
 
 	  # Extract subdirectory from the argument.

 	  func_dirname "$arg" "/" ""
 	  xdir="$func_dirname_result"

 
 	  if test "$pic_object" != none; then
 	    # Prepend the subdirectory the object is found in.
 	    pic_object="$xdir$pic_object"
 
 	    if test "$prev" = dlfiles; then
 	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
 		dlfiles="$dlfiles $pic_object"
 		prev=
 		continue
 	      else
 		# If libtool objects are unsupported, then we need to preload.
 		prev=dlprefiles
 	      fi
 	    fi
 
 	    # CHECK ME:  I think I busted this.  -Ossama
 	    if test "$prev" = dlprefiles; then
 	      # Preload the old-style object.
 	      dlprefiles="$dlprefiles $pic_object"
 	      prev=
 	    fi
 
 	    # A PIC object.

 	    func_append libobjs " $pic_object"

 	    arg="$pic_object"
 	  fi
 
 	  # Non-PIC object.
 	  if test "$non_pic_object" != none; then
 	    # Prepend the subdirectory the object is found in.
 	    non_pic_object="$xdir$non_pic_object"
 
 	    # A standard non-PIC object

 	    func_append non_pic_objects " $non_pic_object"

 	    if test -z "$pic_object" || test "$pic_object" = none ; then
 	      arg="$non_pic_object"
 	    fi
 	  else
 	    # If the PIC object exists, use it instead.
 	    # $xdir was prepended to $pic_object above.
 	    non_pic_object="$pic_object"

 	    func_append non_pic_objects " $non_pic_object"

 	  fi
 	else
 	  # Only an error if not doing a dry-run.

 	  if $opt_dry_run; then

 	    # Extract subdirectory from the argument.

 	    func_dirname "$arg" "/" ""
 	    xdir="$func_dirname_result"
 
 	    func_lo2o "$arg"
 	    pic_object=$xdir$objdir/$func_lo2o_result
 	    non_pic_object=$xdir$func_lo2o_result
 	    func_append libobjs " $pic_object"
 	    func_append non_pic_objects " $non_pic_object"
 	  else
 	    func_fatal_error "\`$arg' is not a valid libtool object"

 	  fi
 	fi
 	;;
 
       *.$libext)
 	# An archive.
 	deplibs="$deplibs $arg"
 	old_deplibs="$old_deplibs $arg"
 	continue
 	;;
 
       *.la)
 	# A libtool-controlled library.
 
 	if test "$prev" = dlfiles; then
 	  # This library was specified with -dlopen.
 	  dlfiles="$dlfiles $arg"
 	  prev=
 	elif test "$prev" = dlprefiles; then
 	  # The library was specified with -dlpreopen.
 	  dlprefiles="$dlprefiles $arg"
 	  prev=
 	else
 	  deplibs="$deplibs $arg"
 	fi
 	continue
 	;;
 
       # Some other compiler argument.
       *)
 	# Unknown arguments in both finalize_command and compile_command need
 	# to be aesthetically quoted because they are evaled later.

 	func_quote_for_eval "$arg"
 	arg="$func_quote_for_eval_result"

 	;;
       esac # arg
 
       # Now actually substitute the argument into the commands.
       if test -n "$arg"; then

 	func_append compile_command " $arg"
 	func_append finalize_command " $arg"

       fi
     done # argument parsing loop
 

     test -n "$prev" && \
       func_fatal_help "the \`$prevarg' option requires an argument"

 
     if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
       eval arg=\"$export_dynamic_flag_spec\"

       func_append compile_command " $arg"
       func_append finalize_command " $arg"

     fi
 
     oldlibs=
     # calculate the name of the file, without its directory

     func_basename "$output"
     outputname="$func_basename_result"

     libobjs_save="$libobjs"
 
     if test -n "$shlibpath_var"; then
       # get the directories listed in $shlibpath_var

       eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`

     else
       shlib_search_path=
     fi
     eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
     eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
 

     func_dirname "$output" "/" ""
     output_objdir="$func_dirname_result$objdir"

     # Create the object directory.

     func_mkdir_p "$output_objdir"

 
     # Determine the type of output
     case $output in
     "")

       func_fatal_help "you must specify an output file"

       ;;
     *.$libext) linkmode=oldlib ;;
     *.lo | *.$objext) linkmode=obj ;;
     *.la) linkmode=lib ;;
     *) linkmode=prog ;; # Anything else should be a program.
     esac
 
     specialdeplibs=
 
     libs=
     # Find all interdependent deplibs by searching for libraries
     # that are linked more than once (e.g. -la -lb -la)
     for deplib in $deplibs; do

       if $opt_duplicate_deps ; then

 	case "$libs " in
 	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
 	esac
       fi
       libs="$libs $deplib"
     done
 
     if test "$linkmode" = lib; then
       libs="$predeps $libs $compiler_lib_search_path $postdeps"
 
       # Compute libraries that are listed more than once in $predeps
       # $postdeps and mark them as special (i.e., whose duplicates are
       # not to be eliminated).
       pre_post_deps=

       if $opt_duplicate_compiler_generated_deps; then

 	for pre_post_dep in $predeps $postdeps; do
 	  case "$pre_post_deps " in
 	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
 	  esac
 	  pre_post_deps="$pre_post_deps $pre_post_dep"
 	done
       fi
       pre_post_deps=
     fi
 
     deplibs=
     newdependency_libs=
     newlib_search_path=
     need_relink=no # whether we're linking any uninstalled libtool libraries
     notinst_deplibs= # not-installed libtool libraries

     notinst_path= # paths that contain not-installed libtool libraries
 

     case $linkmode in
     lib)

 	passes="conv dlpreopen link"

 	for file in $dlfiles $dlprefiles; do
 	  case $file in
 	  *.la) ;;
 	  *)

 	    func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"

 	    ;;
 	  esac
 	done
 	;;
     prog)
 	compile_deplibs=
 	finalize_deplibs=
 	alldeplibs=no
 	newdlfiles=
 	newdlprefiles=
 	passes="conv scan dlopen dlpreopen link"
 	;;
     *)  passes="conv"
 	;;
     esac

     for pass in $passes; do

       # The preopen pass in lib mode reverses $deplibs; put it back here
       # so that -L comes before libs that need it for instance...
       if test "$linkmode,$pass" = "lib,link"; then
 	## FIXME: Find the place where the list is rebuilt in the wrong
 	##        order, and fix it there properly
         tmp_deplibs=
 	for deplib in $deplibs; do
 	  tmp_deplibs="$deplib $tmp_deplibs"
 	done
 	deplibs="$tmp_deplibs"
       fi
 

       if test "$linkmode,$pass" = "lib,link" ||
 	 test "$linkmode,$pass" = "prog,scan"; then
 	libs="$deplibs"
 	deplibs=
       fi
       if test "$linkmode" = prog; then
 	case $pass in
 	dlopen) libs="$dlfiles" ;;
 	dlpreopen) libs="$dlprefiles" ;;

 	link)
 	  libs="$deplibs %DEPLIBS%"
 	  test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
 	  ;;

 	esac
       fi

       if test "$linkmode,$pass" = "lib,dlpreopen"; then
 	# Collect and forward deplibs of preopened libtool libs
 	for lib in $dlprefiles; do
 	  # Ignore non-libtool-libs
 	  dependency_libs=
 	  case $lib in
 	  *.la)	func_source "$lib" ;;
 	  esac
 
 	  # Collect preopened libtool deplibs, except any this library
 	  # has declared as weak libs
 	  for deplib in $dependency_libs; do
             deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
 	    case " $weak_libs " in
 	    *" $deplib_base "*) ;;
 	    *) deplibs="$deplibs $deplib" ;;
 	    esac
 	  done
 	done
 	libs="$dlprefiles"
       fi

       if test "$pass" = dlopen; then
 	# Collect dlpreopened libraries
 	save_deplibs="$deplibs"
 	deplibs=
       fi

       for deplib in $libs; do
 	lib=
 	found=no
 	case $deplib in

 	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)

 	  if test "$linkmode,$pass" = "prog,link"; then
 	    compile_deplibs="$deplib $compile_deplibs"
 	    finalize_deplibs="$deplib $finalize_deplibs"
 	  else
 	    compiler_flags="$compiler_flags $deplib"

 	    if test "$linkmode" = lib ; then
 		case "$new_inherited_linker_flags " in
 		    *" $deplib "*) ;;
 		    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
 		esac
 	    fi

 	  fi
 	  continue
 	  ;;
 	-l*)
 	  if test "$linkmode" != lib && test "$linkmode" != prog; then

 	    func_warning "\`-l' is ignored for archives/objects"

 	    continue
 	  fi

 	  func_stripname '-l' '' "$deplib"
 	  name=$func_stripname_result

 	  if test "$linkmode" = lib; then
 	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
 	  else
 	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
 	  fi
 	  for searchdir in $searchdirs; do

 	    for search_ext in .la $std_shrext .so .a; do
 	      # Search the libtool library
 	      lib="$searchdir/lib${name}${search_ext}"
 	      if test -f "$lib"; then
 		if test "$search_ext" = ".la"; then
 		  found=yes
 		else
 		  found=no
 		fi
 		break 2
 	      fi
 	    done
 	  done
 	  if test "$found" != yes; then
 	    # deplib doesn't seem to be a libtool library
 	    if test "$linkmode,$pass" = "prog,link"; then
 	      compile_deplibs="$deplib $compile_deplibs"
 	      finalize_deplibs="$deplib $finalize_deplibs"
 	    else
 	      deplibs="$deplib $deplibs"
 	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
 	    fi
 	    continue
 	  else # deplib is a libtool library
 	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
 	    # We need to do some special things here, and not later.
 	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 	      case " $predeps $postdeps " in
 	      *" $deplib "*)

 		if func_lalib_p "$lib"; then

 		  library_names=
 		  old_library=

 		  func_source "$lib"

 		  for l in $old_library $library_names; do
 		    ll="$l"
 		  done
 		  if test "X$ll" = "X$old_library" ; then # only static version available
 		    found=no

 		    func_dirname "$lib" "" "."
 		    ladir="$func_dirname_result"

 		    lib=$ladir/$old_library
 		    if test "$linkmode,$pass" = "prog,link"; then
 		      compile_deplibs="$deplib $compile_deplibs"
 		      finalize_deplibs="$deplib $finalize_deplibs"
 		    else
 		      deplibs="$deplib $deplibs"
 		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
 		    fi
 		    continue
 		  fi
 		fi

 		;;

 	      *) ;;
 	      esac
 	    fi
 	  fi
 	  ;; # -l

 	*.ltframework)
 	  if test "$linkmode,$pass" = "prog,link"; then
 	    compile_deplibs="$deplib $compile_deplibs"
 	    finalize_deplibs="$deplib $finalize_deplibs"
 	  else
 	    deplibs="$deplib $deplibs"
 	    if test "$linkmode" = lib ; then
 		case "$new_inherited_linker_flags " in
 		    *" $deplib "*) ;;
 		    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
 		esac
 	    fi
 	  fi
 	  continue
 	  ;;

 	-L*)
 	  case $linkmode in
 	  lib)
 	    deplibs="$deplib $deplibs"
 	    test "$pass" = conv && continue
 	    newdependency_libs="$deplib $newdependency_libs"

 	    func_stripname '-L' '' "$deplib"
 	    newlib_search_path="$newlib_search_path $func_stripname_result"

 	    ;;
 	  prog)
 	    if test "$pass" = conv; then
 	      deplibs="$deplib $deplibs"
 	      continue
 	    fi
 	    if test "$pass" = scan; then
 	      deplibs="$deplib $deplibs"
 	    else
 	      compile_deplibs="$deplib $compile_deplibs"
 	      finalize_deplibs="$deplib $finalize_deplibs"
 	    fi

 	    func_stripname '-L' '' "$deplib"
 	    newlib_search_path="$newlib_search_path $func_stripname_result"

 	    ;;
 	  *)

 	    func_warning "\`-L' is ignored for archives/objects"

 	    ;;
 	  esac # linkmode
 	  continue
 	  ;; # -L
 	-R*)
 	  if test "$pass" = link; then

 	    func_stripname '-R' '' "$deplib"
 	    dir=$func_stripname_result

 	    # Make sure the xrpath contains only unique directories.
 	    case "$xrpath " in
 	    *" $dir "*) ;;
 	    *) xrpath="$xrpath $dir" ;;
 	    esac
 	  fi
 	  deplibs="$deplib $deplibs"
 	  continue
 	  ;;
 	*.la) lib="$deplib" ;;
 	*.$libext)
 	  if test "$pass" = conv; then
 	    deplibs="$deplib $deplibs"
 	    continue
 	  fi
 	  case $linkmode in
 	  lib)

 	    # Linking convenience modules into shared libraries is allowed,
 	    # but linking other static libraries is non-portable.
 	    case " $dlpreconveniencelibs " in
 	    *" $deplib "*) ;;
 	    *)
 	      valid_a_lib=no
 	      case $deplibs_check_method in
 		match_pattern*)
 		  set dummy $deplibs_check_method; shift
 		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
 		  if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \

 		    | $EGREP "$match_pattern_regex" > /dev/null; then

 		    valid_a_lib=yes
 		  fi

 		;;

 		pass_all)
 		  valid_a_lib=yes

 		;;

 	      esac
 	      if test "$valid_a_lib" != yes; then
 		$ECHO
 		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
 		$ECHO "*** I have the capability to make that library automatically link in when"
 		$ECHO "*** you link to this library.  But I can only do this if you have a"
 		$ECHO "*** shared version of the library, which you do not appear to have"
 		$ECHO "*** because the file extensions .$libext of this argument makes me believe"
 		$ECHO "*** that it is just a static archive that I should not use here."
 	      else
 		$ECHO
 		$ECHO "*** Warning: Linking the shared library $output against the"
 		$ECHO "*** static library $deplib is not portable!"
 		deplibs="$deplib $deplibs"
 	      fi
 	      ;;
 	    esac

 	    continue
 	    ;;
 	  prog)
 	    if test "$pass" != link; then
 	      deplibs="$deplib $deplibs"
 	    else
 	      compile_deplibs="$deplib $compile_deplibs"
 	      finalize_deplibs="$deplib $finalize_deplibs"
 	    fi
 	    continue
 	    ;;
 	  esac # linkmode
 	  ;; # *.$libext
 	*.lo | *.$objext)
 	  if test "$pass" = conv; then
 	    deplibs="$deplib $deplibs"
 	  elif test "$linkmode" = prog; then
 	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
 	      # If there is no dlopen support or we're linking statically,
 	      # we need to preload.
 	      newdlprefiles="$newdlprefiles $deplib"
 	      compile_deplibs="$deplib $compile_deplibs"
 	      finalize_deplibs="$deplib $finalize_deplibs"
 	    else
 	      newdlfiles="$newdlfiles $deplib"
 	    fi
 	  fi
 	  continue
 	  ;;
 	%DEPLIBS%)
 	  alldeplibs=yes
 	  continue
 	  ;;
 	esac # case $deplib

 	if test "$found" = yes || test -f "$lib"; then :
 	else

 	  func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"

 	fi
 
 	# Check to see that this really is a libtool archive.

 	func_lalib_unsafe_p "$lib" \
 	  || func_fatal_error "\`$lib' is not a valid libtool archive"

 	func_dirname "$lib" "" "."
 	ladir="$func_dirname_result"

 
 	dlname=
 	dlopen=
 	dlpreopen=
 	libdir=
 	library_names=
 	old_library=

 	inherited_linker_flags=

 	# If the library was installed with an old release of libtool,
 	# it will not redefine variables installed, or shouldnotlink
 	installed=yes
 	shouldnotlink=no
 	avoidtemprpath=
 
 
 	# Read the .la file

 	func_source "$lib"
 
 	# Convert "-framework foo" to "foo.ltframework"
 	if test -n "$inherited_linker_flags"; then
 	  tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
 	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
 	    case " $new_inherited_linker_flags " in
 	      *" $tmp_inherited_linker_flag "*) ;;
 	      *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
 	    esac
 	  done
 	fi
 	dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`

 	if test "$linkmode,$pass" = "lib,link" ||
 	   test "$linkmode,$pass" = "prog,scan" ||
 	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
 	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
 	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
 	fi
 
 	if test "$pass" = conv; then
 	  # Only check for convenience libraries
 	  deplibs="$lib $deplibs"
 	  if test -z "$libdir"; then
 	    if test -z "$old_library"; then

 	      func_fatal_error "cannot find name of link library for \`$lib'"

 	    fi
 	    # It is a libtool convenience library, so add in its objects.
 	    convenience="$convenience $ladir/$objdir/$old_library"
 	    old_convenience="$old_convenience $ladir/$objdir/$old_library"

 	    tmp_libs=
 	    for deplib in $dependency_libs; do
 	      deplibs="$deplib $deplibs"
 	      if $opt_duplicate_deps ; then
 		case "$tmp_libs " in
 		*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
 		esac
 	      fi
 	      tmp_libs="$tmp_libs $deplib"
 	    done

 	  elif test "$linkmode" != prog && test "$linkmode" != lib; then

 	    func_fatal_error "\`$lib' is not a convenience library"

 	  fi
 	  continue
 	fi # $pass = conv
 
 
 	# Get the name of the library we link against.
 	linklib=
 	for l in $old_library $library_names; do
 	  linklib="$l"
 	done
 	if test -z "$linklib"; then

 	  func_fatal_error "cannot find name of link library for \`$lib'"

 	fi
 
 	# This library was specified with -dlopen.
 	if test "$pass" = dlopen; then
 	  if test -z "$libdir"; then

 	    func_fatal_error "cannot -dlopen a convenience library: \`$lib'"

 	  fi
 	  if test -z "$dlname" ||
 	     test "$dlopen_support" != yes ||
 	     test "$build_libtool_libs" = no; then
 	    # If there is no dlname, no dlopen support or we're linking
 	    # statically, we need to preload.  We also need to preload any
 	    # dependent libraries so libltdl's deplib preloader doesn't
 	    # bomb out in the load deplibs phase.
 	    dlprefiles="$dlprefiles $lib $dependency_libs"
 	  else
 	    newdlfiles="$newdlfiles $lib"
 	  fi
 	  continue
 	fi # $pass = dlopen
 
 	# We need an absolute path.
 	case $ladir in
 	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
 	*)
 	  abs_ladir=`cd "$ladir" && pwd`
 	  if test -z "$abs_ladir"; then

 	    func_warning "cannot determine absolute directory name of \`$ladir'"
 	    func_warning "passing it literally to the linker, although it might fail"

 	    abs_ladir="$ladir"
 	  fi
 	  ;;
 	esac

 	func_basename "$lib"
 	laname="$func_basename_result"

 
 	# Find the relevant object directory and library name.
 	if test "X$installed" = Xyes; then
 	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then

 	    func_warning "library \`$lib' was moved."

 	    dir="$ladir"
 	    absdir="$abs_ladir"
 	    libdir="$abs_ladir"
 	  else
 	    dir="$libdir"
 	    absdir="$libdir"
 	  fi
 	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
 	else
 	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
 	    dir="$ladir"
 	    absdir="$abs_ladir"
 	    # Remove this search path later
 	    notinst_path="$notinst_path $abs_ladir"
 	  else
 	    dir="$ladir/$objdir"
 	    absdir="$abs_ladir/$objdir"
 	    # Remove this search path later
 	    notinst_path="$notinst_path $abs_ladir"
 	  fi
 	fi # $installed = yes

 	func_stripname 'lib' '.la' "$laname"
 	name=$func_stripname_result

 
 	# This library was specified with -dlpreopen.
 	if test "$pass" = dlpreopen; then

 	  if test -z "$libdir" && test "$linkmode" = prog; then
 	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"

 	  fi
 	  # Prefer using a static library (so that no silly _DYNAMIC symbols
 	  # are required to link).
 	  if test -n "$old_library"; then
 	    newdlprefiles="$newdlprefiles $dir/$old_library"

 	    # Keep a list of preopened convenience libraries to check
 	    # that they are being used correctly in the link pass.
 	    test -z "$libdir" && \
 		dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"

 	  # Otherwise, use the dlname, so that lt_dlopen finds it.
 	  elif test -n "$dlname"; then
 	    newdlprefiles="$newdlprefiles $dir/$dlname"
 	  else
 	    newdlprefiles="$newdlprefiles $dir/$linklib"
 	  fi
 	fi # $pass = dlpreopen
 
 	if test -z "$libdir"; then
 	  # Link the convenience library
 	  if test "$linkmode" = lib; then
 	    deplibs="$dir/$old_library $deplibs"
 	  elif test "$linkmode,$pass" = "prog,link"; then
 	    compile_deplibs="$dir/$old_library $compile_deplibs"
 	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
 	  else
 	    deplibs="$lib $deplibs" # used for prog,scan pass
 	  fi
 	  continue
 	fi
 
 
 	if test "$linkmode" = prog && test "$pass" != link; then
 	  newlib_search_path="$newlib_search_path $ladir"
 	  deplibs="$lib $deplibs"
 
 	  linkalldeplibs=no
 	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
 	     test "$build_libtool_libs" = no; then
 	    linkalldeplibs=yes
 	  fi
 
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
 	    case $deplib in

 	    -L*) func_stripname '-L' '' "$deplib"
 	         newlib_search_path="$newlib_search_path $func_stripname_result"
 		 ;;

 	    esac
 	    # Need to link against all dependency_libs?
 	    if test "$linkalldeplibs" = yes; then
 	      deplibs="$deplib $deplibs"
 	    else
 	      # Need to hardcode shared library paths
 	      # or/and link against static libraries
 	      newdependency_libs="$deplib $newdependency_libs"
 	    fi

 	    if $opt_duplicate_deps ; then

 	      case "$tmp_libs " in
 	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
 	      esac
 	    fi
 	    tmp_libs="$tmp_libs $deplib"
 	  done # for deplib
 	  continue
 	fi # $linkmode = prog...
 
 	if test "$linkmode,$pass" = "prog,link"; then
 	  if test -n "$library_names" &&

 	     { { test "$prefer_static_libs" = no ||

 	         test "$prefer_static_libs,$installed" = "built,yes"; } ||

 	       test -z "$old_library"; }; then

 	    # We need to hardcode the library path
 	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
 	      # Make sure the rpath contains only unique directories.

 	      case "$temp_rpath:" in
 	      *"$absdir:"*) ;;
 	      *) temp_rpath="$temp_rpath$absdir:" ;;

 	      esac
 	    fi
 
 	    # Hardcode the library path.
 	    # Skip directories that are in the system default run-time
 	    # search path.
 	    case " $sys_lib_dlsearch_path " in
 	    *" $absdir "*) ;;
 	    *)
 	      case "$compile_rpath " in
 	      *" $absdir "*) ;;
 	      *) compile_rpath="$compile_rpath $absdir"
 	      esac
 	      ;;
 	    esac
 	    case " $sys_lib_dlsearch_path " in
 	    *" $libdir "*) ;;
 	    *)
 	      case "$finalize_rpath " in
 	      *" $libdir "*) ;;
 	      *) finalize_rpath="$finalize_rpath $libdir"
 	      esac
 	      ;;
 	    esac
 	  fi # $linkmode,$pass = prog,link...
 
 	  if test "$alldeplibs" = yes &&
 	     { test "$deplibs_check_method" = pass_all ||
 	       { test "$build_libtool_libs" = yes &&
 		 test -n "$library_names"; }; }; then
 	    # We only need to search for static libraries
 	    continue
 	  fi
 	fi
 
 	link_static=no # Whether the deplib will be linked statically
 	use_static_libs=$prefer_static_libs

 	if test "$use_static_libs" = built && test "$installed" = yes; then

 	  use_static_libs=no
 	fi
 	if test -n "$library_names" &&
 	   { test "$use_static_libs" = no || test -z "$old_library"; }; then

 	  case $host in
 	  *cygwin* | *mingw* | *cegcc*)
 	      # No point in relinking DLLs because paths are not encoded
 	      notinst_deplibs="$notinst_deplibs $lib"
 	      need_relink=no
 	    ;;
 	  *)
 	    if test "$installed" = no; then
 	      notinst_deplibs="$notinst_deplibs $lib"
 	      need_relink=yes
 	    fi
 	    ;;
 	  esac

 	  # This is a shared library
 

 	  # Warn about portability, can't link against -module's on some
 	  # systems (darwin).  Don't bleat about dlopened modules though!
 	  dlopenmodule=""
 	  for dlpremoduletest in $dlprefiles; do
 	    if test "X$dlpremoduletest" = "X$lib"; then
 	      dlopenmodule="$dlpremoduletest"
 	      break
 	    fi
 	  done
 	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
 	    $ECHO

 	    if test "$linkmode" = prog; then

 	      $ECHO "*** Warning: Linking the executable $output against the loadable module"

 	    else

 	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"

 	    fi

 	    $ECHO "*** $linklib is not portable!"

 	  fi
 	  if test "$linkmode" = lib &&
 	     test "$hardcode_into_libs" = yes; then
 	    # Hardcode the library path.
 	    # Skip directories that are in the system default run-time
 	    # search path.
 	    case " $sys_lib_dlsearch_path " in
 	    *" $absdir "*) ;;
 	    *)
 	      case "$compile_rpath " in
 	      *" $absdir "*) ;;
 	      *) compile_rpath="$compile_rpath $absdir"
 	      esac
 	      ;;
 	    esac
 	    case " $sys_lib_dlsearch_path " in
 	    *" $libdir "*) ;;
 	    *)
 	      case "$finalize_rpath " in
 	      *" $libdir "*) ;;
 	      *) finalize_rpath="$finalize_rpath $libdir"
 	      esac
 	      ;;
 	    esac
 	  fi
 
 	  if test -n "$old_archive_from_expsyms_cmds"; then
 	    # figure out the soname
 	    set dummy $library_names

 	    shift
 	    realname="$1"
 	    shift
 	    libname=`eval "\\$ECHO \"$libname_spec\""`

 	    # use dlname if we got it. it's perfectly good, no?
 	    if test -n "$dlname"; then
 	      soname="$dlname"
 	    elif test -n "$soname_spec"; then
 	      # bleh windows
 	      case $host in

 	      *cygwin* | mingw* | *cegcc*)
 	        func_arith $current - $age
 		major=$func_arith_result

 		versuffix="-$major"
 		;;
 	      esac
 	      eval soname=\"$soname_spec\"
 	    else
 	      soname="$realname"
 	    fi
 
 	    # Make a new name for the extract_expsyms_cmds to use
 	    soroot="$soname"

 	    func_basename "$soroot"
 	    soname="$func_basename_result"
 	    func_stripname 'lib' '.dll' "$soname"
 	    newlib=libimp-$func_stripname_result.a

 
 	    # If the library has no export list, then create one now
 	    if test -f "$output_objdir/$soname-def"; then :
 	    else

 	      func_verbose "extracting exported symbol list from \`$soname'"
 	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'

 	    fi
 
 	    # Create $newlib
 	    if test -f "$output_objdir/$newlib"; then :; else

 	      func_verbose "generating import library for \`$soname'"
 	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'

 	    fi
 	    # make sure the library variables are pointing to the new library
 	    dir=$output_objdir
 	    linklib=$newlib
 	  fi # test -n "$old_archive_from_expsyms_cmds"
 
 	  if test "$linkmode" = prog || test "$mode" != relink; then
 	    add_shlibpath=
 	    add_dir=
 	    add=
 	    lib_linked=yes
 	    case $hardcode_action in
 	    immediate | unsupported)
 	      if test "$hardcode_direct" = no; then
 		add="$dir/$linklib"
 		case $host in
 		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
 		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
 		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
 		    *-*-unixware7*) add_dir="-L$dir" ;;
 		  *-*-darwin* )

 		    # if the lib is a (non-dlopened) module then we can not
 		    # link against it, someone is ignoring the earlier warnings

 		    if /usr/bin/file -L $add 2> /dev/null |

 			 $GREP ": [^:]* bundle" >/dev/null ; then
 		      if test "X$dlopenmodule" != "X$lib"; then
 			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
 			if test -z "$old_library" ; then
 			  $ECHO
 			  $ECHO "*** And there doesn't seem to be a static archive available"
 			  $ECHO "*** The link will probably fail, sorry"
 			else
 			  add="$dir/$old_library"
 			fi
 		      elif test -n "$old_library"; then
 			add="$dir/$old_library"

 		      fi
 		    fi
 		esac
 	      elif test "$hardcode_minus_L" = no; then
 		case $host in
 		*-*-sunos*) add_shlibpath="$dir" ;;
 		esac
 		add_dir="-L$dir"
 		add="-l$name"
 	      elif test "$hardcode_shlibpath_var" = no; then
 		add_shlibpath="$dir"
 		add="-l$name"
 	      else
 		lib_linked=no
 	      fi
 	      ;;
 	    relink)

 	      if test "$hardcode_direct" = yes &&
 	         test "$hardcode_direct_absolute" = no; then

 		add="$dir/$linklib"
 	      elif test "$hardcode_minus_L" = yes; then
 		add_dir="-L$dir"
 		# Try looking first in the location we're being installed to.
 		if test -n "$inst_prefix_dir"; then
 		  case $libdir in
 		    [\\/]*)
 		      add_dir="$add_dir -L$inst_prefix_dir$libdir"
 		      ;;
 		  esac
 		fi
 		add="-l$name"
 	      elif test "$hardcode_shlibpath_var" = yes; then
 		add_shlibpath="$dir"
 		add="-l$name"
 	      else
 		lib_linked=no
 	      fi
 	      ;;
 	    *) lib_linked=no ;;
 	    esac
 
 	    if test "$lib_linked" != yes; then

 	      func_fatal_configuration "unsupported hardcode properties"

 	    fi
 
 	    if test -n "$add_shlibpath"; then
 	      case :$compile_shlibpath: in
 	      *":$add_shlibpath:"*) ;;
 	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
 	      esac
 	    fi
 	    if test "$linkmode" = prog; then
 	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
 	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
 	    else
 	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
 	      test -n "$add" && deplibs="$add $deplibs"

 	      if test "$hardcode_direct" != yes &&
 		 test "$hardcode_minus_L" != yes &&

 		 test "$hardcode_shlibpath_var" = yes; then
 		case :$finalize_shlibpath: in
 		*":$libdir:"*) ;;
 		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
 		esac
 	      fi
 	    fi
 	  fi
 
 	  if test "$linkmode" = prog || test "$mode" = relink; then
 	    add_shlibpath=
 	    add_dir=
 	    add=
 	    # Finalize command for both is simple: just hardcode it.

 	    if test "$hardcode_direct" = yes &&
 	       test "$hardcode_direct_absolute" = no; then

 	      add="$libdir/$linklib"
 	    elif test "$hardcode_minus_L" = yes; then
 	      add_dir="-L$libdir"
 	      add="-l$name"
 	    elif test "$hardcode_shlibpath_var" = yes; then
 	      case :$finalize_shlibpath: in
 	      *":$libdir:"*) ;;
 	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
 	      esac
 	      add="-l$name"
 	    elif test "$hardcode_automatic" = yes; then
 	      if test -n "$inst_prefix_dir" &&
 		 test -f "$inst_prefix_dir$libdir/$linklib" ; then

 		add="$inst_prefix_dir$libdir/$linklib"

 	      else

 		add="$libdir/$linklib"

 	      fi
 	    else
 	      # We cannot seem to hardcode it, guess we'll fake it.
 	      add_dir="-L$libdir"
 	      # Try looking first in the location we're being installed to.
 	      if test -n "$inst_prefix_dir"; then
 		case $libdir in
 		  [\\/]*)
 		    add_dir="$add_dir -L$inst_prefix_dir$libdir"
 		    ;;
 		esac
 	      fi
 	      add="-l$name"
 	    fi
 
 	    if test "$linkmode" = prog; then
 	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
 	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
 	    else
 	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
 	      test -n "$add" && deplibs="$add $deplibs"
 	    fi
 	  fi
 	elif test "$linkmode" = prog; then
 	  # Here we assume that one of hardcode_direct or hardcode_minus_L
 	  # is not unsupported.  This is valid on all known static and
 	  # shared platforms.
 	  if test "$hardcode_direct" != unsupported; then
 	    test -n "$old_library" && linklib="$old_library"
 	    compile_deplibs="$dir/$linklib $compile_deplibs"
 	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
 	  else
 	    compile_deplibs="-l$name -L$dir $compile_deplibs"
 	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
 	  fi
 	elif test "$build_libtool_libs" = yes; then
 	  # Not a shared library
 	  if test "$deplibs_check_method" != pass_all; then
 	    # We're trying link a shared library against a static one
 	    # but the system doesn't support it.
 
 	    # Just print a warning and add the library to dependency_libs so
 	    # that the program can be linked against the static library.

 	    $ECHO
 	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
 	    $ECHO "*** I have the capability to make that library automatically link in when"
 	    $ECHO "*** you link to this library.  But I can only do this if you have a"
 	    $ECHO "*** shared version of the library, which you do not appear to have."

 	    if test "$module" = yes; then

 	      $ECHO "*** But as you try to build a module library, libtool will still create "
 	      $ECHO "*** a static module, that should work as long as the dlopening application"
 	      $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."

 	      if test -z "$global_symbol_pipe"; then

 		$ECHO
 		$ECHO "*** However, this would only work if libtool was able to extract symbol"
 		$ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
 		$ECHO "*** not find such a program.  So, this module is probably useless."
 		$ECHO "*** \`nm' from GNU binutils and a full rebuild may help."

 	      fi
 	      if test "$build_old_libs" = no; then
 		build_libtool_libs=module
 		build_old_libs=yes
 	      else
 		build_libtool_libs=no
 	      fi
 	    fi
 	  else
 	    deplibs="$dir/$old_library $deplibs"
 	    link_static=yes
 	  fi
 	fi # link shared/static library?
 
 	if test "$linkmode" = lib; then
 	  if test -n "$dependency_libs" &&
 	     { test "$hardcode_into_libs" != yes ||
 	       test "$build_old_libs" = yes ||
 	       test "$link_static" = yes; }; then
 	    # Extract -R from dependency_libs
 	    temp_deplibs=
 	    for libdir in $dependency_libs; do
 	      case $libdir in

 	      -R*) func_stripname '-R' '' "$libdir"
 	           temp_xrpath=$func_stripname_result

 		   case " $xrpath " in
 		   *" $temp_xrpath "*) ;;
 		   *) xrpath="$xrpath $temp_xrpath";;
 		   esac;;
 	      *) temp_deplibs="$temp_deplibs $libdir";;
 	      esac
 	    done
 	    dependency_libs="$temp_deplibs"
 	  fi
 
 	  newlib_search_path="$newlib_search_path $absdir"
 	  # Link against this library
 	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
 	  # ... and its dependency_libs
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
 	    newdependency_libs="$deplib $newdependency_libs"

 	    if $opt_duplicate_deps ; then

 	      case "$tmp_libs " in
 	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
 	      esac
 	    fi
 	    tmp_libs="$tmp_libs $deplib"
 	  done
 
 	  if test "$link_all_deplibs" != no; then
 	    # Add the search paths of all dependency libraries
 	    for deplib in $dependency_libs; do

 	      path=

 	      case $deplib in
 	      -L*) path="$deplib" ;;
 	      *.la)

 	        func_dirname "$deplib" "" "."
 		dir="$func_dirname_result"

 		# We need an absolute path.
 		case $dir in
 		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
 		*)
 		  absdir=`cd "$dir" && pwd`
 		  if test -z "$absdir"; then

 		    func_warning "cannot determine absolute directory name of \`$dir'"

 		    absdir="$dir"
 		  fi
 		  ;;
 		esac

 		if $GREP "^installed=no" $deplib > /dev/null; then

 		case $host in
 		*-*-darwin*)

 		  depdepl=

 		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
 		  if test -n "$deplibrary_names" ; then
 		    for tmp in $deplibrary_names ; do
 		      depdepl=$tmp
 		    done

 		    if test -f "$absdir/$objdir/$depdepl" ; then
 		      depdepl="$absdir/$objdir/$depdepl"
 		      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
                       if test -z "$darwin_install_name"; then
                           darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
                       fi
 		      compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
 		      linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
 		      path=

 		    fi
 		  fi
 		  ;;
 		*)

 		  path="-L$absdir/$objdir"

 		  ;;
 		esac

 		else
 		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
 		  test -z "$libdir" && \
 		    func_fatal_error "\`$deplib' is not a valid libtool archive"
 		  test "$absdir" != "$libdir" && \
 		    func_warning "\`$deplib' seems to be moved"
 
 		  path="-L$absdir"
 		fi

 		;;
 	      esac
 	      case " $deplibs " in
 	      *" $path "*) ;;
 	      *) deplibs="$path $deplibs" ;;
 	      esac
 	    done
 	  fi # link_all_deplibs != no
 	fi # linkmode = lib
       done # for deplib in $libs

       if test "$pass" = link; then
 	if test "$linkmode" = "prog"; then
 	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
 	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
 	else
 	  compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 	fi
       fi

       dependency_libs="$newdependency_libs"
       if test "$pass" = dlpreopen; then
 	# Link the dlpreopened libraries before other libraries
 	for deplib in $save_deplibs; do
 	  deplibs="$deplib $deplibs"
 	done
       fi
       if test "$pass" != dlopen; then
 	if test "$pass" != conv; then
 	  # Make sure lib_search_path contains only unique directories.
 	  lib_search_path=
 	  for dir in $newlib_search_path; do
 	    case "$lib_search_path " in
 	    *" $dir "*) ;;
 	    *) lib_search_path="$lib_search_path $dir" ;;
 	    esac
 	  done
 	  newlib_search_path=
 	fi
 
 	if test "$linkmode,$pass" != "prog,link"; then
 	  vars="deplibs"
 	else
 	  vars="compile_deplibs finalize_deplibs"
 	fi
 	for var in $vars dependency_libs; do
 	  # Add libraries to $var in reverse order
 	  eval tmp_libs=\"\$$var\"
 	  new_libs=
 	  for deplib in $tmp_libs; do
 	    # FIXME: Pedantically, this is the right thing to do, so
 	    #        that some nasty dependency loop isn't accidentally
 	    #        broken:
 	    #new_libs="$deplib $new_libs"
 	    # Pragmatically, this seems to cause very few problems in
 	    # practice:
 	    case $deplib in
 	    -L*) new_libs="$deplib $new_libs" ;;
 	    -R*) ;;
 	    *)
 	      # And here is the reason: when a library appears more
 	      # than once as an explicit dependence of a library, or
 	      # is implicitly linked in more than once by the
 	      # compiler, it is considered special, and multiple
 	      # occurrences thereof are not removed.  Compare this
 	      # with having the same library being listed as a
 	      # dependency of multiple other libraries: in this case,
 	      # we know (pedantically, we assume) the library does not
 	      # need to be listed more than once, so we keep only the
 	      # last copy.  This is not always right, but it is rare
 	      # enough that we require users that really mean to play
 	      # such unportable linking tricks to link the library
 	      # using -Wl,-lname, so that libtool does not consider it
 	      # for duplicate removal.
 	      case " $specialdeplibs " in
 	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
 	      *)
 		case " $new_libs " in
 		*" $deplib "*) ;;
 		*) new_libs="$deplib $new_libs" ;;
 		esac
 		;;
 	      esac
 	      ;;
 	    esac
 	  done
 	  tmp_libs=
 	  for deplib in $new_libs; do
 	    case $deplib in
 	    -L*)
 	      case " $tmp_libs " in
 	      *" $deplib "*) ;;
 	      *) tmp_libs="$tmp_libs $deplib" ;;
 	      esac
 	      ;;
 	    *) tmp_libs="$tmp_libs $deplib" ;;
 	    esac
 	  done
 	  eval $var=\"$tmp_libs\"
 	done # for var
       fi
       # Last step: remove runtime libs from dependency_libs
       # (they stay in deplibs)
       tmp_libs=
       for i in $dependency_libs ; do
 	case " $predeps $postdeps $compiler_lib_search_path " in
 	*" $i "*)
 	  i=""
 	  ;;
 	esac
 	if test -n "$i" ; then
 	  tmp_libs="$tmp_libs $i"
 	fi
       done
       dependency_libs=$tmp_libs
     done # for pass
     if test "$linkmode" = prog; then
       dlfiles="$newdlfiles"

     fi
     if test "$linkmode" = prog || test "$linkmode" = lib; then

       dlprefiles="$newdlprefiles"
     fi
 
     case $linkmode in
     oldlib)

       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
 	func_warning "\`-dlopen' is ignored for archives"
       fi
 

       case " $deplibs" in
       *\ -l* | *\ -L*)

 	func_warning "\`-l' and \`-L' are ignored for archives" ;;

       esac

       test -n "$rpath" && \
 	func_warning "\`-rpath' is ignored for archives"

       test -n "$xrpath" && \
 	func_warning "\`-R' is ignored for archives"

       test -n "$vinfo" && \
 	func_warning "\`-version-info/-version-number' is ignored for archives"

       test -n "$release" && \
 	func_warning "\`-release' is ignored for archives"

       test -n "$export_symbols$export_symbols_regex" && \
 	func_warning "\`-export-symbols' is ignored for archives"

 
       # Now set the variables for building old libraries.
       build_libtool_libs=no
       oldlibs="$output"
       objs="$objs$old_deplibs"
       ;;
 
     lib)
       # Make sure we only generate libraries of the form `libNAME.la'.
       case $outputname in
       lib*)

 	func_stripname 'lib' '.la' "$outputname"
 	name=$func_stripname_result

 	eval shared_ext=\"$shrext_cmds\"
 	eval libname=\"$libname_spec\"
 	;;
       *)

 	test "$module" = no && \
 	  func_fatal_help "libtool library \`$output' must begin with \`lib'"
 

 	if test "$need_lib_prefix" != no; then
 	  # Add the "lib" prefix for modules if required

 	  func_stripname '' '.la' "$outputname"
 	  name=$func_stripname_result

 	  eval shared_ext=\"$shrext_cmds\"
 	  eval libname=\"$libname_spec\"
 	else

 	  func_stripname '' '.la' "$outputname"
 	  libname=$func_stripname_result

 	fi
 	;;
       esac
 
       if test -n "$objs"; then
 	if test "$deplibs_check_method" != pass_all; then

 	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"

 	else

 	  $ECHO
 	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
 	  $ECHO "*** objects $objs is not portable!"

 	  libobjs="$libobjs $objs"
 	fi
       fi
 

       test "$dlself" != no && \
 	func_warning "\`-dlopen self' is ignored for libtool libraries"

 
       set dummy $rpath

       shift
       test "$#" -gt 1 && \
 	func_warning "ignoring multiple \`-rpath's for a libtool library"
 
       install_libdir="$1"

 
       oldlibs=
       if test -z "$rpath"; then
 	if test "$build_libtool_libs" = yes; then
 	  # Building a libtool convenience library.
 	  # Some compilers have problems with a `.al' extension so
 	  # convenience libraries should have the same extension an
 	  # archive normally would.
 	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
 	  build_libtool_libs=convenience
 	  build_old_libs=yes
 	fi
 

 	test -n "$vinfo" && \
 	  func_warning "\`-version-info/-version-number' is ignored for convenience libraries"

 	test -n "$release" && \
 	  func_warning "\`-release' is ignored for convenience libraries"

       else
 
 	# Parse the version information argument.
 	save_ifs="$IFS"; IFS=':'
 	set dummy $vinfo 0 0 0

 	shift

 	IFS="$save_ifs"
 

 	test -n "$7" && \
 	  func_fatal_help "too many parameters to \`-version-info'"

 
 	# convert absolute version numbers to libtool ages
 	# this retains compatibility with .la files and attempts
 	# to make the code below a bit more comprehensible
 
 	case $vinfo_number in
 	yes)

 	  number_major="$1"
 	  number_minor="$2"
 	  number_revision="$3"

 	  #
 	  # There are really only two kinds -- those that
 	  # use the current revision as the major version
 	  # and those that subtract age and use age as
 	  # a minor version.  But, then there is irix
 	  # which has an extra 1 added just for fun
 	  #
 	  case $version_type in

 	  darwin|linux|osf|windows|none)

 	    func_arith $number_major + $number_minor
 	    current=$func_arith_result

 	    age="$number_minor"
 	    revision="$number_revision"
 	    ;;
 	  freebsd-aout|freebsd-elf|sunos)
 	    current="$number_major"
 	    revision="$number_minor"
 	    age="0"
 	    ;;
 	  irix|nonstopux)

 	    func_arith $number_major + $number_minor
 	    current=$func_arith_result

 	    age="$number_minor"
 	    revision="$number_minor"

 	    lt_irix_increment=no

 	    ;;

 	  *)
 	    func_fatal_configuration "$modename: unknown library version type \`$version_type'"
 	    ;;

 	  esac
 	  ;;
 	no)

 	  current="$1"
 	  revision="$2"
 	  age="$3"

 	  ;;
 	esac
 
 	# Check that each of the things are valid numbers.
 	case $current in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)

 	  func_error "CURRENT \`$current' must be a nonnegative integer"
 	  func_fatal_error "\`$vinfo' is not valid version information"

 	  ;;
 	esac
 
 	case $revision in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)

 	  func_error "REVISION \`$revision' must be a nonnegative integer"
 	  func_fatal_error "\`$vinfo' is not valid version information"

 	  ;;
 	esac
 
 	case $age in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)

 	  func_error "AGE \`$age' must be a nonnegative integer"
 	  func_fatal_error "\`$vinfo' is not valid version information"

 	  ;;
 	esac
 
 	if test "$age" -gt "$current"; then

 	  func_error "AGE \`$age' is greater than the current interface number \`$current'"
 	  func_fatal_error "\`$vinfo' is not valid version information"

 	fi
 
 	# Calculate the version variables.
 	major=
 	versuffix=
 	verstring=
 	case $version_type in
 	none) ;;
 
 	darwin)
 	  # Like Linux, but with the current version available in
 	  # verstring for coding it into the library header

 	  func_arith $current - $age
 	  major=.$func_arith_result

 	  versuffix="$major.$age.$revision"
 	  # Darwin ld doesn't like 0 for these options...

 	  func_arith $current + 1
 	  minor_current=$func_arith_result

 	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
 	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"

 	  ;;
 
 	freebsd-aout)
 	  major=".$current"
 	  versuffix=".$current.$revision";
 	  ;;
 
 	freebsd-elf)
 	  major=".$current"

 	  versuffix=".$current"

 	  ;;
 
 	irix | nonstopux)

 	  if test "X$lt_irix_increment" = "Xno"; then

 	    func_arith $current - $age

 	  else

 	    func_arith $current - $age + 1

 	  fi

 	  major=$func_arith_result
 

 	  case $version_type in
 	    nonstopux) verstring_prefix=nonstopux ;;
 	    *)         verstring_prefix=sgi ;;
 	  esac
 	  verstring="$verstring_prefix$major.$revision"
 
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$revision
 	  while test "$loop" -ne 0; do

 	    func_arith $revision - $loop
 	    iface=$func_arith_result
 	    func_arith $loop - 1
 	    loop=$func_arith_result

 	    verstring="$verstring_prefix$major.$iface:$verstring"
 	  done
 
 	  # Before this point, $major must not contain `.'.
 	  major=.$major
 	  versuffix="$major.$revision"
 	  ;;
 
 	linux)

 	  func_arith $current - $age
 	  major=.$func_arith_result

 	  versuffix="$major.$age.$revision"
 	  ;;
 
 	osf)

 	  func_arith $current - $age
 	  major=.$func_arith_result

 	  versuffix=".$current.$age.$revision"
 	  verstring="$current.$age.$revision"
 
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$age
 	  while test "$loop" -ne 0; do

 	    func_arith $current - $loop
 	    iface=$func_arith_result
 	    func_arith $loop - 1
 	    loop=$func_arith_result

 	    verstring="$verstring:${iface}.0"
 	  done
 
 	  # Make executables depend on our current version.
 	  verstring="$verstring:${current}.0"
 	  ;;
 

 	qnx)
 	  major=".$current"
 	  versuffix=".$current"
 	  ;;
 

 	sunos)
 	  major=".$current"
 	  versuffix=".$current.$revision"
 	  ;;
 
 	windows)
 	  # Use '-' rather than '.', since we only want one
 	  # extension on DOS 8.3 filesystems.

 	  func_arith $current - $age
 	  major=$func_arith_result

 	  versuffix="-$major"
 	  ;;
 
 	*)

 	  func_fatal_configuration "unknown library version type \`$version_type'"

 	  ;;
 	esac
 
 	# Clear the version info if we defaulted, and they specified a release.
 	if test -z "$vinfo" && test -n "$release"; then
 	  major=
 	  case $version_type in
 	  darwin)
 	    # we can't check for "0.0" in archive_cmds due to quoting
 	    # problems, so we reset it completely
 	    verstring=
 	    ;;
 	  *)
 	    verstring="0.0"
 	    ;;
 	  esac
 	  if test "$need_version" = no; then
 	    versuffix=
 	  else
 	    versuffix=".0.0"
 	  fi
 	fi
 
 	# Remove version info from name if versioning should be avoided
 	if test "$avoid_version" = yes && test "$need_version" = no; then
 	  major=
 	  versuffix=
 	  verstring=""
 	fi
 
 	# Check to see if the archive will have undefined symbols.
 	if test "$allow_undefined" = yes; then
 	  if test "$allow_undefined_flag" = unsupported; then

 	    func_warning "undefined symbols not allowed in $host shared libraries"

 	    build_libtool_libs=no
 	    build_old_libs=yes
 	  fi
 	else
 	  # Don't allow undefined symbols.
 	  allow_undefined_flag="$no_undefined_flag"
 	fi

       fi
 

       func_generate_dlsyms "$libname" "$libname" "yes"
       libobjs="$libobjs $symfileobj"
       test "X$libobjs" = "X " && libobjs=
 

       if test "$mode" != relink; then
 	# Remove our outputs, but don't remove object files since they
 	# may have been created when compiling PIC objects.
 	removelist=

 	tempremovelist=`$ECHO "$output_objdir/*"`

 	for p in $tempremovelist; do
 	  case $p in

 	    *.$objext | *.gcno)

 	       ;;
 	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
 	       if test "X$precious_files_regex" != "X"; then

 		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
 		 then

 		   continue
 		 fi
 	       fi
 	       removelist="$removelist $p"
 	       ;;
 	    *) ;;
 	  esac
 	done

 	test -n "$removelist" && \
 	  func_show_eval "${RM}r \$removelist"

       fi
 
       # Now set the variables for building old libraries.
       if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
 	oldlibs="$oldlibs $output_objdir/$libname.$libext"
 
 	# Transform .lo files to .o files.

 	oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`

       fi
 
       # Eliminate all temporary directories.

       #for path in $notinst_path; do

       #	lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
       #	deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
       #	dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`

       #done

 
       if test -n "$xrpath"; then
 	# If the user specified any rpath flags, then add them.
 	temp_xrpath=
 	for libdir in $xrpath; do
 	  temp_xrpath="$temp_xrpath -R$libdir"
 	  case "$finalize_rpath " in
 	  *" $libdir "*) ;;
 	  *) finalize_rpath="$finalize_rpath $libdir" ;;
 	  esac
 	done
 	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
 	  dependency_libs="$temp_xrpath $dependency_libs"
 	fi
       fi
 
       # Make sure dlfiles contains only unique files that won't be dlpreopened
       old_dlfiles="$dlfiles"
       dlfiles=
       for lib in $old_dlfiles; do
 	case " $dlprefiles $dlfiles " in
 	*" $lib "*) ;;
 	*) dlfiles="$dlfiles $lib" ;;
 	esac
       done
 
       # Make sure dlprefiles contains only unique files
       old_dlprefiles="$dlprefiles"
       dlprefiles=
       for lib in $old_dlprefiles; do
 	case "$dlprefiles " in
 	*" $lib "*) ;;
 	*) dlprefiles="$dlprefiles $lib" ;;
 	esac
       done
 
       if test "$build_libtool_libs" = yes; then
 	if test -n "$rpath"; then
 	  case $host in

 	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)

 	    # these systems don't actually have a c library (as such)!
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.[012])
 	    # Rhapsody C library is in the System framework

 	    deplibs="$deplibs System.ltframework"

 	    ;;
 	  *-*-netbsd*)
 	    # Don't link with libc until the a.out ld.so is fixed.
 	    ;;
 	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
 	    # Do not include libc due to us having libc/libc_r.
 	    ;;
 	  *-*-sco3.2v5* | *-*-sco5v6*)
 	    # Causes problems with __ctype
 	    ;;
 	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
 	    # Compiler inserts libc in the correct place for threads to work
 	    ;;

 	  *)

 	    # Add libc to deplibs on all other systems if necessary.
 	    if test "$build_libtool_need_lc" = "yes"; then
 	      deplibs="$deplibs -lc"
 	    fi
 	    ;;
 	  esac
 	fi
 
 	# Transform deplibs into only deplibs that can be linked in shared.
 	name_save=$name
 	libname_save=$libname
 	release_save=$release
 	versuffix_save=$versuffix
 	major_save=$major
 	# I'm not sure if I'm treating the release correctly.  I think
 	# release should show up in the -l (ie -lgmp5) so we don't want to
 	# add it in twice.  Is that correct?
 	release=""
 	versuffix=""
 	major=""
 	newdeplibs=
 	droppeddeps=no
 	case $deplibs_check_method in
 	pass_all)
 	  # Don't check for shared/static.  Everything works.
 	  # This might be a little naive.  We might want to check
 	  # whether the library exists or not.  But this is on
 	  # osf3 & osf4 and I'm not really sure... Just
 	  # implementing what was already the behavior.
 	  newdeplibs=$deplibs
 	  ;;
 	test_compile)
 	  # This code stresses the "libraries are programs" paradigm to its
 	  # limits. Maybe even breaks it.  We compile a program, linking it
 	  # against the deplibs as a proxy for the library.  Then we can check
 	  # whether they linked in statically or dynamically with ldd.

 	  $opt_dry_run || $RM conftest.c

 	  cat > conftest.c <<EOF
 	  int main() { return 0; }
 EOF

 	  $opt_dry_run || $RM conftest

 	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then

 	    ldd_output=`ldd conftest`
 	    for i in $deplibs; do

 	      case $i in
 	      -l*)
 		func_stripname -l '' "$i"
 		name=$func_stripname_result

 		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		  case " $predeps $postdeps " in
 		  *" $i "*)
 		    newdeplibs="$newdeplibs $i"
 		    i=""
 		    ;;
 		  esac

 		fi

 		if test -n "$i" ; then

 		  libname=`eval "\\$ECHO \"$libname_spec\""`
 		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
 		  set dummy $deplib_matches; shift
 		  deplib_match=$1

 		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
 		    newdeplibs="$newdeplibs $i"
 		  else
 		    droppeddeps=yes

 		    $ECHO
 		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
 		    $ECHO "*** I have the capability to make that library automatically link in when"
 		    $ECHO "*** you link to this library.  But I can only do this if you have a"
 		    $ECHO "*** shared version of the library, which I believe you do not have"
 		    $ECHO "*** because a test_compile did reveal that the linker did not use it for"
 		    $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."

 		  fi
 		fi

 		;;
 	      *)

 		newdeplibs="$newdeplibs $i"

 		;;
 	      esac

 	    done
 	  else
 	    # Error occurred in the first compile.  Let's try to salvage
 	    # the situation: Compile a separate program for each library.
 	    for i in $deplibs; do

 	      case $i in
 	      -l*)
 		func_stripname -l '' "$i"
 		name=$func_stripname_result
 		$opt_dry_run || $RM conftest

 		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then

 		  ldd_output=`ldd conftest`
 		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		    case " $predeps $postdeps " in
 		    *" $i "*)
 		      newdeplibs="$newdeplibs $i"
 		      i=""
 		      ;;
 		    esac
 		  fi
 		  if test -n "$i" ; then

 		    libname=`eval "\\$ECHO \"$libname_spec\""`
 		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
 		    set dummy $deplib_matches; shift
 		    deplib_match=$1

 		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
 		      newdeplibs="$newdeplibs $i"
 		    else
 		      droppeddeps=yes

 		      $ECHO
 		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
 		      $ECHO "*** I have the capability to make that library automatically link in when"
 		      $ECHO "*** you link to this library.  But I can only do this if you have a"
 		      $ECHO "*** shared version of the library, which you do not appear to have"
 		      $ECHO "*** because a test_compile did reveal that the linker did not use this one"
 		      $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."

 		    fi
 		  fi
 		else
 		  droppeddeps=yes

 		  $ECHO
 		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
 		  $ECHO "*** make it link in!  You will probably need to install it or some"
 		  $ECHO "*** library that it depends on before this library will be fully"
 		  $ECHO "*** functional.  Installing it before continuing would be even better."

 		fi

 		;;
 	      *)

 		newdeplibs="$newdeplibs $i"

 		;;
 	      esac

 	    done
 	  fi
 	  ;;
 	file_magic*)

 	  set dummy $deplibs_check_method; shift
 	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`

 	  for a_deplib in $deplibs; do

 	    case $a_deplib in
 	    -l*)
 	      func_stripname -l '' "$a_deplib"
 	      name=$func_stripname_result

 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)
 		  newdeplibs="$newdeplibs $a_deplib"
 		  a_deplib=""
 		  ;;
 		esac
 	      fi
 	      if test -n "$a_deplib" ; then

 		libname=`eval "\\$ECHO \"$libname_spec\""`

 		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
 		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
 		  for potent_lib in $potential_libs; do
 		      # Follow soft links.

 		      if ls -lLd "$potent_lib" 2>/dev/null |
 			 $GREP " -> " >/dev/null; then

 			continue
 		      fi
 		      # The statement above tries to avoid entering an
 		      # endless loop below, in case of cyclic links.
 		      # We might still enter an endless loop, since a link
 		      # loop can be closed while we follow links,
 		      # but so what?
 		      potlib="$potent_lib"
 		      while test -h "$potlib" 2>/dev/null; do
 			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
 			case $potliblink in
 			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;

 			*) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;

 			esac
 		      done

 		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
 			 $SED -e 10q |
 			 $EGREP "$file_magic_regex" > /dev/null; then

 			newdeplibs="$newdeplibs $a_deplib"
 			a_deplib=""
 			break 2
 		      fi
 		  done
 		done
 	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes

 		$ECHO
 		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
 		$ECHO "*** I have the capability to make that library automatically link in when"
 		$ECHO "*** you link to this library.  But I can only do this if you have a"
 		$ECHO "*** shared version of the library, which you do not appear to have"
 		$ECHO "*** because I did check the linker path looking for a file starting"

 		if test -z "$potlib" ; then

 		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"

 		else

 		  $ECHO "*** with $libname and none of the candidates passed a file format test"
 		  $ECHO "*** using a file magic. Last file checked: $potlib"

 		fi
 	      fi

 	      ;;
 	    *)

 	      # Add a -L argument.
 	      newdeplibs="$newdeplibs $a_deplib"

 	      ;;
 	    esac

 	  done # Gone through all deplibs.
 	  ;;
 	match_pattern*)

 	  set dummy $deplibs_check_method; shift
 	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`

 	  for a_deplib in $deplibs; do

 	    case $a_deplib in
 	    -l*)
 	      func_stripname -l '' "$a_deplib"
 	      name=$func_stripname_result

 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)
 		  newdeplibs="$newdeplibs $a_deplib"
 		  a_deplib=""
 		  ;;
 		esac
 	      fi
 	      if test -n "$a_deplib" ; then

 		libname=`eval "\\$ECHO \"$libname_spec\""`

 		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
 		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
 		  for potent_lib in $potential_libs; do
 		    potlib="$potent_lib" # see symlink-check above in file_magic test

 		    if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
 		       $EGREP "$match_pattern_regex" > /dev/null; then

 		      newdeplibs="$newdeplibs $a_deplib"
 		      a_deplib=""
 		      break 2
 		    fi
 		  done
 		done
 	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes

 		$ECHO
 		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
 		$ECHO "*** I have the capability to make that library automatically link in when"
 		$ECHO "*** you link to this library.  But I can only do this if you have a"
 		$ECHO "*** shared version of the library, which you do not appear to have"
 		$ECHO "*** because I did check the linker path looking for a file starting"

 		if test -z "$potlib" ; then

 		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"

 		else

 		  $ECHO "*** with $libname and none of the candidates passed a file format test"
 		  $ECHO "*** using a regex pattern. Last file checked: $potlib"

 		fi
 	      fi

 	      ;;
 	    *)

 	      # Add a -L argument.
 	      newdeplibs="$newdeplibs $a_deplib"

 	      ;;
 	    esac

 	  done # Gone through all deplibs.
 	  ;;
 	none | unknown | *)
 	  newdeplibs=""

 	  tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
 	      -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`

 	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 	    for i in $predeps $postdeps ; do
 	      # can't use Xsed below, because $i might contain '/'

 	      tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`

 	    done
 	  fi

 	  if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[	 ]//g' |
 	     $GREP . >/dev/null; then
 	    $ECHO

 	    if test "X$deplibs_check_method" = "Xnone"; then

 	      $ECHO "*** Warning: inter-library dependencies are not supported in this platform."

 	    else

 	      $ECHO "*** Warning: inter-library dependencies are not known to be supported."

 	    fi

 	    $ECHO "*** All declared inter-library dependencies are being dropped."

 	    droppeddeps=yes
 	  fi
 	  ;;
 	esac
 	versuffix=$versuffix_save
 	major=$major_save
 	release=$release_save
 	libname=$libname_save
 	name=$name_save
 
 	case $host in
 	*-*-rhapsody* | *-*-darwin1.[012])

 	  # On Rhapsody replace the C library with the System framework
 	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`

 	  ;;
 	esac
 
 	if test "$droppeddeps" = yes; then
 	  if test "$module" = yes; then

 	    $ECHO
 	    $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
 	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
 	    $ECHO "*** a static module, that should work as long as the dlopening"
 	    $ECHO "*** application is linked with the -dlopen flag."

 	    if test -z "$global_symbol_pipe"; then

 	      $ECHO
 	      $ECHO "*** However, this would only work if libtool was able to extract symbol"
 	      $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
 	      $ECHO "*** not find such a program.  So, this module is probably useless."
 	      $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."

 	    fi
 	    if test "$build_old_libs" = no; then
 	      oldlibs="$output_objdir/$libname.$libext"
 	      build_libtool_libs=module
 	      build_old_libs=yes
 	    else
 	      build_libtool_libs=no
 	    fi
 	  else

 	    $ECHO "*** The inter-library dependencies that have been dropped here will be"
 	    $ECHO "*** automatically added whenever a program is linked with this library"
 	    $ECHO "*** or is declared to -dlopen it."

 
 	    if test "$allow_undefined" = no; then

 	      $ECHO
 	      $ECHO "*** Since this library must not contain undefined symbols,"
 	      $ECHO "*** because either the platform does not support them or"
 	      $ECHO "*** it was explicitly requested with -no-undefined,"
 	      $ECHO "*** libtool will only create a static version of it."

 	      if test "$build_old_libs" = no; then
 		oldlibs="$output_objdir/$libname.$libext"
 		build_libtool_libs=module
 		build_old_libs=yes
 	      else
 		build_libtool_libs=no
 	      fi
 	    fi
 	  fi
 	fi
 	# Done checking deplibs!
 	deplibs=$newdeplibs
       fi

       # Time to change all our "foo.ltframework" stuff back to "-framework foo"
       case $host in
 	*-*-darwin*)
 	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 	  new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 	  deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 	  ;;
       esac

 
       # move library search paths that coincide with paths to not yet
       # installed libraries to the beginning of the library search list
       new_libs=
       for path in $notinst_path; do
 	case " $new_libs " in
 	*" -L$path/$objdir "*) ;;
 	*)
 	  case " $deplibs " in
 	  *" -L$path/$objdir "*)
 	    new_libs="$new_libs -L$path/$objdir" ;;
 	  esac
 	  ;;
 	esac
       done
       for deplib in $deplibs; do
 	case $deplib in
 	-L*)
 	  case " $new_libs " in
 	  *" $deplib "*) ;;
 	  *) new_libs="$new_libs $deplib" ;;
 	  esac
 	  ;;
 	*) new_libs="$new_libs $deplib" ;;
 	esac
       done
       deplibs="$new_libs"
 
       # All the library-specific variables (install_libdir is set above).
       library_names=
       old_library=
       dlname=
 
       # Test again, we may have decided not to build it any more
       if test "$build_libtool_libs" = yes; then
 	if test "$hardcode_into_libs" = yes; then
 	  # Hardcode the library paths
 	  hardcode_libdirs=
 	  dep_rpath=
 	  rpath="$finalize_rpath"
 	  test "$mode" != relink && rpath="$compile_rpath$rpath"
 	  for libdir in $rpath; do
 	    if test -n "$hardcode_libdir_flag_spec"; then
 	      if test -n "$hardcode_libdir_separator"; then
 		if test -z "$hardcode_libdirs"; then
 		  hardcode_libdirs="$libdir"
 		else
 		  # Just accumulate the unique libdirs.
 		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
 		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
 		    ;;
 		  *)
 		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
 		    ;;
 		  esac
 		fi
 	      else
 		eval flag=\"$hardcode_libdir_flag_spec\"
 		dep_rpath="$dep_rpath $flag"
 	      fi
 	    elif test -n "$runpath_var"; then
 	      case "$perm_rpath " in
 	      *" $libdir "*) ;;
 	      *) perm_rpath="$perm_rpath $libdir" ;;
 	      esac
 	    fi
 	  done
 	  # Substitute the hardcoded libdirs into the rpath.
 	  if test -n "$hardcode_libdir_separator" &&
 	     test -n "$hardcode_libdirs"; then
 	    libdir="$hardcode_libdirs"
 	    if test -n "$hardcode_libdir_flag_spec_ld"; then

 	      eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"

 	    else
 	      eval dep_rpath=\"$hardcode_libdir_flag_spec\"
 	    fi
 	  fi
 	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
 	    # We should set the runpath_var.
 	    rpath=
 	    for dir in $perm_rpath; do
 	      rpath="$rpath$dir:"
 	    done
 	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
 	  fi
 	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
 	fi
 
 	shlibpath="$finalize_shlibpath"
 	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
 	if test -n "$shlibpath"; then
 	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
 	fi
 
 	# Get the real and link names of the library.
 	eval shared_ext=\"$shrext_cmds\"
 	eval library_names=\"$library_names_spec\"
 	set dummy $library_names

 	shift
 	realname="$1"
 	shift

 
 	if test -n "$soname_spec"; then
 	  eval soname=\"$soname_spec\"
 	else
 	  soname="$realname"
 	fi
 	if test -z "$dlname"; then
 	  dlname=$soname
 	fi
 
 	lib="$output_objdir/$realname"
 	linknames=
 	for link
 	do
 	  linknames="$linknames $link"
 	done
 
 	# Use standard objects if they are pic

 	test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
 	test "X$libobjs" = "X " && libobjs=
 
 	delfiles=
 	if test -n "$export_symbols" && test -n "$include_expsyms"; then
 	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
 	  export_symbols="$output_objdir/$libname.uexp"
 	  delfiles="$delfiles $export_symbols"
 	fi
 
 	orig_export_symbols=
 	case $host_os in
 	cygwin* | mingw* | cegcc*)
 	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
 	    # exporting using user supplied symfile
 	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
 	      # and it's NOT already a .def file. Must figure out
 	      # which of the given symbols are data symbols and tag
 	      # them as such. So, trigger use of export_symbols_cmds.
 	      # export_symbols gets reassigned inside the "prepare
 	      # the list of exported symbols" if statement, so the
 	      # include_expsyms logic still works.
 	      orig_export_symbols="$export_symbols"
 	      export_symbols=
 	      always_export_symbols=yes
 	    fi
 	  fi
 	  ;;
 	esac

 
 	# Prepare the list of exported symbols
 	if test -z "$export_symbols"; then
 	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then

 	    func_verbose "generating symbol list for \`$libname.la'"

 	    export_symbols="$output_objdir/$libname.exp"

 	    $opt_dry_run || $RM $export_symbols

 	    cmds=$export_symbols_cmds
 	    save_ifs="$IFS"; IFS='~'
 	    for cmd in $cmds; do
 	      IFS="$save_ifs"
 	      eval cmd=\"$cmd\"

 	      func_len " $cmd"
 	      len=$func_len_result
 	      if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
 		func_show_eval "$cmd" 'exit $?'
 		skipped_export=false

 	      else

 		# The command line is too long to execute in one step.
 		func_verbose "using reloadable object file for export list..."
 		skipped_export=:

 		# Break out early, otherwise skipped_export may be
 		# set to false by a later but shorter cmd.
 		break
 	      fi
 	    done
 	    IFS="$save_ifs"

 	    if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
 	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
 	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'

 	    fi
 	  fi
 	fi
 
 	if test -n "$export_symbols" && test -n "$include_expsyms"; then

 	  tmp_export_symbols="$export_symbols"
 	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
 	  $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
 	fi
 
 	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
 	  # The given exports_symbols file has to be filtered, so filter it.
 	  func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
 	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
 	  # 's' commands which not all seds can handle. GNU sed should be fine
 	  # though. Also, the filter scales superlinearly with the number of
 	  # global variables. join(1) would be nice here, but unfortunately
 	  # isn't a blessed tool.
 	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
 	  delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
 	  export_symbols=$output_objdir/$libname.def
 	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols

 	fi
 
 	tmp_deplibs=
 	for test_deplib in $deplibs; do

 	  case " $convenience " in
 	  *" $test_deplib "*) ;;
 	  *)
 	    tmp_deplibs="$tmp_deplibs $test_deplib"
 	    ;;
 	  esac

 	done
 	deplibs="$tmp_deplibs"
 
 	if test -n "$convenience"; then

 	  if test -n "$whole_archive_flag_spec" &&
 	    test "$compiler_needs_object" = yes &&
 	    test -z "$libobjs"; then
 	    # extract the archives, so we have objects to list.
 	    # TODO: could optimize this to just extract one archive.
 	    whole_archive_flag_spec=
 	  fi

 	  if test -n "$whole_archive_flag_spec"; then
 	    save_libobjs=$libobjs
 	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"

 	    test "X$libobjs" = "X " && libobjs=

 	  else
 	    gentop="$output_objdir/${outputname}x"
 	    generated="$generated $gentop"
 
 	    func_extract_archives $gentop $convenience
 	    libobjs="$libobjs $func_extract_archives_result"

 	    test "X$libobjs" = "X " && libobjs=

 	  fi
 	fi

 	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
 	  eval flag=\"$thread_safe_flag_spec\"
 	  linker_flags="$linker_flags $flag"
 	fi
 
 	# Make a backup of the uninstalled library when relinking
 	if test "$mode" = relink; then

 	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?

 	fi
 
 	# Do each of the archive commands.
 	if test "$module" = yes && test -n "$module_cmds" ; then
 	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
 	    eval test_cmds=\"$module_expsym_cmds\"
 	    cmds=$module_expsym_cmds
 	  else
 	    eval test_cmds=\"$module_cmds\"
 	    cmds=$module_cmds
 	  fi
 	else

 	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
 	    eval test_cmds=\"$archive_expsym_cmds\"
 	    cmds=$archive_expsym_cmds
 	  else
 	    eval test_cmds=\"$archive_cmds\"
 	    cmds=$archive_cmds

 	  fi
 	fi
 
 	if test "X$skipped_export" != "X:" &&

 	   func_len " $test_cmds" &&
 	   len=$func_len_result &&
 	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then

 	  :
 	else

 	  # The command line is too long to link in one step, link piecewise
 	  # or, if using GNU ld and skipped_export is not :, use a linker
 	  # script.

 
 	  # Save the value of $output and $libobjs because we want to
 	  # use them later.  If we have whole_archive_flag_spec, we
 	  # want to use save_libobjs as it was before
 	  # whole_archive_flag_spec was expanded, because we can't
 	  # assume the linker understands whole_archive_flag_spec.
 	  # This may have to be revisited, in case too many
 	  # convenience libraries get linked in and end up exceeding
 	  # the spec.
 	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
 	    save_libobjs=$libobjs
 	  fi
 	  save_output=$output

 	  output_la=`$ECHO "X$output" | $Xsed -e "$basename"`

 
 	  # Clear the reloadable object creation command queue and
 	  # initialize k to one.
 	  test_cmds=
 	  concat_cmds=
 	  objlist=
 	  last_robj=
 	  k=1

 
 	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
 	    output=${output_objdir}/${output_la}.lnkscript
 	    func_verbose "creating GNU ld script: $output"
 	    $ECHO 'INPUT (' > $output
 	    for obj in $save_libobjs
 	    do
 	      $ECHO "$obj" >> $output
 	    done
 	    $ECHO ')' >> $output
 	    delfiles="$delfiles $output"
 	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
 	    output=${output_objdir}/${output_la}.lnk
 	    func_verbose "creating linker input file list: $output"
 	    : > $output
 	    set x $save_libobjs
 	    shift
 	    firstobj=
 	    if test "$compiler_needs_object" = yes; then
 	      firstobj="$1 "
 	      shift
 	    fi
 	    for obj
 	    do
 	      $ECHO "$obj" >> $output
 	    done
 	    delfiles="$delfiles $output"
 	    output=$firstobj\"$file_list_spec$output\"
 	  else
 	    if test -n "$save_libobjs"; then
 	      func_verbose "creating reloadable object files..."
 	      output=$output_objdir/$output_la-${k}.$objext
 	      eval test_cmds=\"$reload_cmds\"
 	      func_len " $test_cmds"
 	      len0=$func_len_result
 	      len=$len0
 
 	      # Loop over the list of objects to be linked.
 	      for obj in $save_libobjs
 	      do
 		func_len " $obj"
 		func_arith $len + $func_len_result
 		len=$func_arith_result
 		if test "X$objlist" = X ||
 		   test "$len" -lt "$max_cmd_len"; then
 		  func_append objlist " $obj"
 		else
 		  # The command $test_cmds is almost too long, add a
 		  # command to the queue.
 		  if test "$k" -eq 1 ; then
 		    # The first file doesn't have a previous command to add.
 		    eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
 		  else
 		    # All subsequent reloadable object files will link in
 		    # the last one created.
 		    eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
 		  fi
 		  last_robj=$output_objdir/$output_la-${k}.$objext
 		  func_arith $k + 1
 		  k=$func_arith_result
 		  output=$output_objdir/$output_la-${k}.$objext
 		  objlist=$obj
 		  func_len " $last_robj"
 		  func_arith $len0 + $func_len_result
 		  len=$func_arith_result
 		fi
 	      done
 	      # Handle the remaining objects by creating one last
 	      # reloadable object file.  All subsequent reloadable object
 	      # files will link in the last one created.
 	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
 	      eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
 	      if test -n "$last_robj"; then
 	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
 	      fi
 	      delfiles="$delfiles $output"
 

 	    else

 	      output=
 	    fi
 
 	    if ${skipped_export-false}; then
 	      func_verbose "generating symbol list for \`$libname.la'"
 	      export_symbols="$output_objdir/$libname.exp"
 	      $opt_dry_run || $RM $export_symbols
 	      libobjs=$output
 	      # Append the command to create the export file.
 	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
 	      eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
 	      if test -n "$last_robj"; then
 		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"

 	      fi
 	    fi
 

 	    test -n "$save_libobjs" &&
 	      func_verbose "creating a temporary reloadable object file: $output"

 	    # Loop through the commands generated above and execute them.
 	    save_ifs="$IFS"; IFS='~'
 	    for cmd in $concat_cmds; do
 	      IFS="$save_ifs"
 	      $opt_silent || {
 		  func_quote_for_expand "$cmd"
 		  eval "func_echo $func_quote_for_expand_result"
 	      }
 	      $opt_dry_run || eval "$cmd" || {
 		lt_exit=$?
 
 		# Restore the uninstalled library and exit
 		if test "$mode" = relink; then
 		  ( cd "$output_objdir" && \
 		    $RM "${realname}T" && \
 		    $MV "${realname}U" "$realname" )
 		fi
 
 		exit $lt_exit
 	      }
 	    done

 	    IFS="$save_ifs"

 
 	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
 	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
 	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
 	    fi
 	  fi
 
           if ${skipped_export-false}; then
 	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
 	      tmp_export_symbols="$export_symbols"
 	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
 	      $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
 	    fi
 
 	    if test -n "$orig_export_symbols"; then
 	      # The given exports_symbols file has to be filtered, so filter it.
 	      func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
 	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
 	      # 's' commands which not all seds can handle. GNU sed should be fine
 	      # though. Also, the filter scales superlinearly with the number of
 	      # global variables. join(1) would be nice here, but unfortunately
 	      # isn't a blessed tool.
 	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
 	      delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
 	      export_symbols=$output_objdir/$libname.def
 	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
 	    fi
 	  fi

 
 	  libobjs=$output
 	  # Restore the value of output.
 	  output=$save_output
 
 	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
 	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"

 	    test "X$libobjs" = "X " && libobjs=

 	  fi
 	  # Expand the library linking commands again to reset the
 	  # value of $libobjs for piecewise linking.
 
 	  # Do each of the archive commands.
 	  if test "$module" = yes && test -n "$module_cmds" ; then
 	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
 	      cmds=$module_expsym_cmds
 	    else
 	      cmds=$module_cmds
 	    fi
 	  else

 	    if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
 	      cmds=$archive_expsym_cmds
 	    else
 	      cmds=$archive_cmds

 	    fi
 	  fi

 	fi
 
 	if test -n "$delfiles"; then
 	  # Append the command to remove temporary files to $cmds.
 	  eval cmds=\"\$cmds~\$RM $delfiles\"
 	fi

 	# Add any objects from preloaded convenience libraries
 	if test -n "$dlprefiles"; then
 	  gentop="$output_objdir/${outputname}x"
 	  generated="$generated $gentop"
 
 	  func_extract_archives $gentop $dlprefiles
 	  libobjs="$libobjs $func_extract_archives_result"
 	  test "X$libobjs" = "X " && libobjs=

 	fi

 	save_ifs="$IFS"; IFS='~'
 	for cmd in $cmds; do
 	  IFS="$save_ifs"
 	  eval cmd=\"$cmd\"

 	  $opt_silent || {
 	    func_quote_for_expand "$cmd"
 	    eval "func_echo $func_quote_for_expand_result"
 	  }
 	  $opt_dry_run || eval "$cmd" || {

 	    lt_exit=$?
 
 	    # Restore the uninstalled library and exit
 	    if test "$mode" = relink; then

 	      ( cd "$output_objdir" && \
 	        $RM "${realname}T" && \
 		$MV "${realname}U" "$realname" )

 	    fi
 
 	    exit $lt_exit
 	  }
 	done
 	IFS="$save_ifs"
 
 	# Restore the uninstalled library and exit
 	if test "$mode" = relink; then

 	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?

 
 	  if test -n "$convenience"; then
 	    if test -z "$whole_archive_flag_spec"; then

 	      func_show_eval '${RM}r "$gentop"'

 	    fi
 	  fi
 
 	  exit $EXIT_SUCCESS
 	fi
 
 	# Create links to the real library.
 	for linkname in $linknames; do
 	  if test "$realname" != "$linkname"; then

 	    func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'

 	  fi
 	done
 
 	# If -module or -export-dynamic was specified, set the dlname.
 	if test "$module" = yes || test "$export_dynamic" = yes; then
 	  # On all known operating systems, these are identical.
 	  dlname="$soname"
 	fi
       fi
       ;;
 
     obj)

       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
 	func_warning "\`-dlopen' is ignored for objects"
       fi
 

       case " $deplibs" in
       *\ -l* | *\ -L*)

 	func_warning "\`-l' and \`-L' are ignored for objects" ;;

       esac

       test -n "$rpath" && \
 	func_warning "\`-rpath' is ignored for objects"

       test -n "$xrpath" && \
 	func_warning "\`-R' is ignored for objects"

       test -n "$vinfo" && \
 	func_warning "\`-version-info' is ignored for objects"

       test -n "$release" && \
 	func_warning "\`-release' is ignored for objects"

 
       case $output in
       *.lo)

 	test -n "$objs$old_deplibs" && \
 	  func_fatal_error "cannot build library object \`$output' from non-libtool objects"
 
 	libobj=$output
 	func_lo2o "$libobj"
 	obj=$func_lo2o_result

 	;;
       *)
 	libobj=
 	obj="$output"
 	;;
       esac
 
       # Delete the old objects.

       $opt_dry_run || $RM $obj $libobj

 
       # Objects from convenience libraries.  This assumes
       # single-version convenience libraries.  Whenever we create
       # different ones for PIC/non-PIC, this we'll have to duplicate
       # the extraction.
       reload_conv_objs=
       gentop=
       # reload_cmds runs $LD directly, so let us get rid of

       # -Wl from whole_archive_flag_spec and hope we can get by with
       # turning comma into space..

       wl=
 
       if test -n "$convenience"; then
 	if test -n "$whole_archive_flag_spec"; then

 	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"

 	  reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`

 	else
 	  gentop="$output_objdir/${obj}x"
 	  generated="$generated $gentop"
 
 	  func_extract_archives $gentop $convenience
 	  reload_conv_objs="$reload_objs $func_extract_archives_result"
 	fi
       fi
 
       # Create the old-style object.

       reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test

 
       output="$obj"

       func_execute_cmds "$reload_cmds" 'exit $?'

 
       # Exit if we aren't doing a library object file.
       if test -z "$libobj"; then
 	if test -n "$gentop"; then

 	  func_show_eval '${RM}r "$gentop"'

 	fi
 
 	exit $EXIT_SUCCESS
       fi
 
       if test "$build_libtool_libs" != yes; then
 	if test -n "$gentop"; then

 	  func_show_eval '${RM}r "$gentop"'

 	fi
 
 	# Create an invalid libtool object if no PIC, so that we don't
 	# accidentally link it into a program.
 	# $show "echo timestamp > $libobj"

 	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?

 	exit $EXIT_SUCCESS
       fi
 
       if test -n "$pic_flag" || test "$pic_mode" != default; then
 	# Only do commands if we really have different PIC objects.
 	reload_objs="$libobjs $reload_conv_objs"
 	output="$libobj"

 	func_execute_cmds "$reload_cmds" 'exit $?'

       fi
 
       if test -n "$gentop"; then

 	func_show_eval '${RM}r "$gentop"'

       fi
 
       exit $EXIT_SUCCESS
       ;;
 
     prog)
       case $host in

 	*cygwin*) func_stripname '' '.exe' "$output"
 	          output=$func_stripname_result.exe;;

       esac

       test -n "$vinfo" && \
 	func_warning "\`-version-info' is ignored for programs"

       test -n "$release" && \
 	func_warning "\`-release' is ignored for programs"

       test "$preload" = yes \
         && test "$dlopen_support" = unknown \
 	&& test "$dlopen_self" = unknown \
 	&& test "$dlopen_self_static" = unknown && \
 	  func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."

 
       case $host in
       *-*-rhapsody* | *-*-darwin1.[012])
 	# On Rhapsody replace the C library is the System framework

 	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
 	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`

 	;;
       esac
 
       case $host in

       *-*-darwin*)
 	# Don't allow lazy linking, it breaks C++ global constructors
 	# But is supposedly fixed on 10.4 or later (yay!).
 	if test "$tagname" = CXX ; then
 	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
 	    10.[0123])
 	      compile_command="$compile_command ${wl}-bind_at_load"
 	      finalize_command="$finalize_command ${wl}-bind_at_load"
 	    ;;
 	  esac
 	fi
 	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
 	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 	;;

       esac
 
 
       # move library search paths that coincide with paths to not yet
       # installed libraries to the beginning of the library search list
       new_libs=
       for path in $notinst_path; do
 	case " $new_libs " in
 	*" -L$path/$objdir "*) ;;
 	*)
 	  case " $compile_deplibs " in
 	  *" -L$path/$objdir "*)
 	    new_libs="$new_libs -L$path/$objdir" ;;
 	  esac
 	  ;;
 	esac
       done
       for deplib in $compile_deplibs; do
 	case $deplib in
 	-L*)
 	  case " $new_libs " in
 	  *" $deplib "*) ;;
 	  *) new_libs="$new_libs $deplib" ;;
 	  esac
 	  ;;
 	*) new_libs="$new_libs $deplib" ;;
 	esac
       done
       compile_deplibs="$new_libs"
 
 
       compile_command="$compile_command $compile_deplibs"
       finalize_command="$finalize_command $finalize_deplibs"
 
       if test -n "$rpath$xrpath"; then
 	# If the user specified any rpath flags, then add them.
 	for libdir in $rpath $xrpath; do
 	  # This is the magic to use -rpath.
 	  case "$finalize_rpath " in
 	  *" $libdir "*) ;;
 	  *) finalize_rpath="$finalize_rpath $libdir" ;;
 	  esac
 	done
       fi
 
       # Now hardcode the library paths
       rpath=
       hardcode_libdirs=
       for libdir in $compile_rpath $finalize_rpath; do
 	if test -n "$hardcode_libdir_flag_spec"; then
 	  if test -n "$hardcode_libdir_separator"; then
 	    if test -z "$hardcode_libdirs"; then
 	      hardcode_libdirs="$libdir"
 	    else
 	      # Just accumulate the unique libdirs.
 	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
 	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
 		;;
 	      *)
 		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
 		;;
 	      esac
 	    fi
 	  else
 	    eval flag=\"$hardcode_libdir_flag_spec\"
 	    rpath="$rpath $flag"
 	  fi
 	elif test -n "$runpath_var"; then
 	  case "$perm_rpath " in
 	  *" $libdir "*) ;;
 	  *) perm_rpath="$perm_rpath $libdir" ;;
 	  esac
 	fi
 	case $host in

 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
 	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`

 	  case :$dllsearchpath: in
 	  *":$libdir:"*) ;;

 	  ::) dllsearchpath=$libdir;;

 	  *) dllsearchpath="$dllsearchpath:$libdir";;
 	  esac
 	  case :$dllsearchpath: in
 	  *":$testbindir:"*) ;;

 	  ::) dllsearchpath=$testbindir;;

 	  *) dllsearchpath="$dllsearchpath:$testbindir";;
 	  esac
 	  ;;
 	esac
       done
       # Substitute the hardcoded libdirs into the rpath.
       if test -n "$hardcode_libdir_separator" &&
 	 test -n "$hardcode_libdirs"; then
 	libdir="$hardcode_libdirs"
 	eval rpath=\" $hardcode_libdir_flag_spec\"
       fi
       compile_rpath="$rpath"
 
       rpath=
       hardcode_libdirs=
       for libdir in $finalize_rpath; do
 	if test -n "$hardcode_libdir_flag_spec"; then
 	  if test -n "$hardcode_libdir_separator"; then
 	    if test -z "$hardcode_libdirs"; then
 	      hardcode_libdirs="$libdir"
 	    else
 	      # Just accumulate the unique libdirs.
 	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
 	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
 		;;
 	      *)
 		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
 		;;
 	      esac
 	    fi
 	  else
 	    eval flag=\"$hardcode_libdir_flag_spec\"
 	    rpath="$rpath $flag"
 	  fi
 	elif test -n "$runpath_var"; then
 	  case "$finalize_perm_rpath " in
 	  *" $libdir "*) ;;
 	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
 	  esac
 	fi
       done
       # Substitute the hardcoded libdirs into the rpath.
       if test -n "$hardcode_libdir_separator" &&
 	 test -n "$hardcode_libdirs"; then
 	libdir="$hardcode_libdirs"
 	eval rpath=\" $hardcode_libdir_flag_spec\"
       fi
       finalize_rpath="$rpath"
 
       if test -n "$libobjs" && test "$build_old_libs" = yes; then
 	# Transform all the library objects into standard objects.

 	compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
 	finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`

       fi
 

       func_generate_dlsyms "$outputname" "@PROGRAM@" "no"

       # template prelinking step
       if test -n "$prelink_cmds"; then
 	func_execute_cmds "$prelink_cmds" 'exit $?'

       fi
 

       wrappers_required=yes
       case $host in
       *cygwin* | *mingw* )
         if test "$build_libtool_libs" != yes; then
           wrappers_required=no
         fi
         ;;
       *cegcc)
         # Disable wrappers for cegcc, we are cross compiling anyway.
         wrappers_required=no
         ;;
       *)
         if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
           wrappers_required=no
         fi
         ;;
       esac
       if test "$wrappers_required" = no; then

 	# Replace the output file specification.

 	compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`

 	link_command="$compile_command$compile_rpath"
 
 	# We have no uninstalled library dependencies, so finalize right now.

 	exit_status=0
 	func_show_eval "$link_command" 'exit_status=$?'

 
 	# Delete the generated files.

 	if test -f "$output_objdir/${outputname}S.${objext}"; then
 	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'

 	fi
 
 	exit $exit_status
       fi
 
       if test -n "$compile_shlibpath$finalize_shlibpath"; then
 	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
       fi
       if test -n "$finalize_shlibpath"; then
 	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
       fi
 
       compile_var=
       finalize_var=
       if test -n "$runpath_var"; then
 	if test -n "$perm_rpath"; then
 	  # We should set the runpath_var.
 	  rpath=
 	  for dir in $perm_rpath; do
 	    rpath="$rpath$dir:"
 	  done
 	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
 	fi
 	if test -n "$finalize_perm_rpath"; then
 	  # We should set the runpath_var.
 	  rpath=
 	  for dir in $finalize_perm_rpath; do
 	    rpath="$rpath$dir:"
 	  done
 	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
 	fi
       fi
 
       if test "$no_install" = yes; then
 	# We don't need to create a wrapper script.
 	link_command="$compile_var$compile_command$compile_rpath"
 	# Replace the output file specification.

 	link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`

 	# Delete the old output file.

 	$opt_dry_run || $RM $output

 	# Link the executable and exit

 	func_show_eval "$link_command" 'exit $?'

 	exit $EXIT_SUCCESS
       fi
 
       if test "$hardcode_action" = relink; then
 	# Fast installation is not supported
 	link_command="$compile_var$compile_command$compile_rpath"
 	relink_command="$finalize_var$finalize_command$finalize_rpath"
 

 	func_warning "this platform does not like uninstalled shared libraries"
 	func_warning "\`$output' will be relinked during installation"

       else
 	if test "$fast_install" != no; then
 	  link_command="$finalize_var$compile_command$finalize_rpath"
 	  if test "$fast_install" = yes; then

 	    relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`

 	  else
 	    # fast_install is set to needless
 	    relink_command=
 	  fi
 	else
 	  link_command="$compile_var$compile_command$compile_rpath"
 	  relink_command="$finalize_var$finalize_command$finalize_rpath"
 	fi
       fi
 
       # Replace the output file specification.

       link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`

 
       # Delete the old output files.

       $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname

       func_show_eval "$link_command" 'exit $?'

 
       # Now create the wrapper script.

       func_verbose "creating $output"

 
       # Quote the relink command for shipping.
       if test -n "$relink_command"; then
 	# Preserve any variables that may affect compiler behavior
 	for var in $variables_saved_for_relink; do
 	  if eval test -z \"\${$var+set}\"; then

 	    relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"

 	  elif eval var_value=\$$var; test -z "$var_value"; then
 	    relink_command="$var=; export $var; $relink_command"
 	  else

 	    func_quote_for_eval "$var_value"
 	    relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"

 	  fi
 	done
 	relink_command="(cd `pwd`; $relink_command)"

 	relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`

       fi
 

       # Quote $ECHO for shipping.
       if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then

 	case $progpath in
 	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
 	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
 	esac

 	qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`

       else

 	qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`

       fi
 

       # Only actually do things if not in dry run mode.
       $opt_dry_run || {

 	# win32 will think the script is a binary if it has
 	# a .exe suffix, so we strip it off here.
 	case $output in

 	  *.exe) func_stripname '' '.exe' "$output"
 	         output=$func_stripname_result ;;

 	esac
 	# test for cygwin because mv fails w/o .exe extensions
 	case $host in
 	  *cygwin*)
 	    exeext=.exe

 	    func_stripname '' '.exe' "$outputname"
 	    outputname=$func_stripname_result ;;

 	  *) exeext= ;;
 	esac
 	case $host in
 	  *cygwin* | *mingw* )

 	    func_dirname_and_basename "$output" "" "."
 	    output_name=$func_basename_result
 	    output_path=$func_dirname_result
 	    cwrappersource="$output_path/$objdir/lt-$output_name.c"
 	    cwrapper="$output_path/$output_name.exe"
 	    $RM $cwrappersource $cwrapper
 	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
 
 	    func_emit_cwrapperexe_src > $cwrappersource
 
 	    # The wrapper executable is built using the $host compiler,
 	    # because it contains $host paths and files. If cross-
 	    # compiling, it, like the target executable, must be
 	    # executed on the $host or under an emulation environment.
 	    $opt_dry_run || {
 	      $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
 	      $STRIP $cwrapper
 	    }

 	    # Now, create the wrapper script for func_source use:
 	    func_ltwrapper_scriptname $cwrapper
 	    $RM $func_ltwrapper_scriptname_result
 	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
 	    $opt_dry_run || {
 	      # note: this script will not be executed, so do not chmod.
 	      if test "x$build" = "x$host" ; then
 		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
 	      else
 		func_emit_wrapper no > $func_ltwrapper_scriptname_result
 	      fi
 	    }

 	  ;;

 	  * )
 	    $RM $output
 	    trap "$RM $output; exit $EXIT_FAILURE" 1 2 15

 	    func_emit_wrapper no > $output
 	    chmod +x $output

 	  ;;
 	esac

       }

       exit $EXIT_SUCCESS
       ;;
     esac
 
     # See if we need to build an old-fashioned archive.
     for oldlib in $oldlibs; do
 
       if test "$build_libtool_libs" = convenience; then

 	oldobjs="$libobjs_save $symfileobj"

 	addlibs="$convenience"
 	build_libtool_libs=no
       else
 	if test "$build_libtool_libs" = module; then
 	  oldobjs="$libobjs_save"
 	  build_libtool_libs=no
 	else
 	  oldobjs="$old_deplibs $non_pic_objects"

 	  if test "$preload" = yes && test -f "$symfileobj"; then
 	    oldobjs="$oldobjs $symfileobj"
 	  fi

 	fi
 	addlibs="$old_convenience"
       fi
 
       if test -n "$addlibs"; then
 	gentop="$output_objdir/${outputname}x"
 	generated="$generated $gentop"
 
 	func_extract_archives $gentop $addlibs
 	oldobjs="$oldobjs $func_extract_archives_result"
       fi
 
       # Do each command in the archive commands.
       if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then

 	cmds=$old_archive_from_new_cmds

       else

 
 	# Add any objects from preloaded convenience libraries
 	if test -n "$dlprefiles"; then
 	  gentop="$output_objdir/${outputname}x"
 	  generated="$generated $gentop"
 
 	  func_extract_archives $gentop $dlprefiles
 	  oldobjs="$oldobjs $func_extract_archives_result"
 	fi
 

 	# POSIX demands no paths to be encoded in archives.  We have
 	# to avoid creating archives with duplicate basenames if we
 	# might have to extract them afterwards, e.g., when creating a
 	# static archive out of a convenience library, or when linking
 	# the entirety of a libtool archive into another (currently
 	# not supported by libtool).
 	if (for obj in $oldobjs
 	    do

 	      func_basename "$obj"
 	      $ECHO "$func_basename_result"

 	    done | sort | sort -uc >/dev/null 2>&1); then
 	  :
 	else

 	  $ECHO "copying selected object files to avoid basename conflicts..."
 	  gentop="$output_objdir/${outputname}x"
 	  generated="$generated $gentop"
 	  func_mkdir_p "$gentop"

 	  save_oldobjs=$oldobjs
 	  oldobjs=
 	  counter=1
 	  for obj in $save_oldobjs
 	  do

 	    func_basename "$obj"
 	    objbase="$func_basename_result"

 	    case " $oldobjs " in
 	    " ") oldobjs=$obj ;;
 	    *[\ /]"$objbase "*)
 	      while :; do
 		# Make sure we don't pick an alternate name that also
 		# overlaps.
 		newobj=lt$counter-$objbase

 		func_arith $counter + 1
 		counter=$func_arith_result

 		case " $oldobjs " in
 		*[\ /]"$newobj "*) ;;
 		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
 		esac
 	      done

 	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"

 	      oldobjs="$oldobjs $gentop/$newobj"
 	      ;;
 	    *) oldobjs="$oldobjs $obj" ;;
 	    esac
 	  done
 	fi
 	eval cmds=\"$old_archive_cmds\"
 

 	func_len " $cmds"
 	len=$func_len_result
 	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then

 	  cmds=$old_archive_cmds
 	else
 	  # the command line is too long to link in one step, link in parts

 	  func_verbose "using piecewise archive linking..."

 	  save_RANLIB=$RANLIB
 	  RANLIB=:
 	  objlist=
 	  concat_cmds=
 	  save_oldobjs=$oldobjs

 	  oldobjs=

 	  # Is there a better way of finding the last object in the list?
 	  for obj in $save_oldobjs
 	  do
 	    last_oldobj=$obj
 	  done

 	  eval test_cmds=\"$old_archive_cmds\"
 	  func_len " $test_cmds"
 	  len0=$func_len_result
 	  len=$len0

 	  for obj in $save_oldobjs
 	  do

 	    func_len " $obj"
 	    func_arith $len + $func_len_result
 	    len=$func_arith_result
 	    func_append objlist " $obj"
 	    if test "$len" -lt "$max_cmd_len"; then

 	      :
 	    else
 	      # the above command should be used before it gets too long
 	      oldobjs=$objlist
 	      if test "$obj" = "$last_oldobj" ; then

 		RANLIB=$save_RANLIB

 	      fi
 	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
 	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
 	      objlist=

 	      len=$len0

 	    fi
 	  done
 	  RANLIB=$save_RANLIB
 	  oldobjs=$objlist
 	  if test "X$oldobjs" = "X" ; then
 	    eval cmds=\"\$concat_cmds\"
 	  else
 	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
 	  fi
 	fi
       fi

       func_execute_cmds "$cmds" 'exit $?'

     done
 

     test -n "$generated" && \
       func_show_eval "${RM}r$generated"

 
     # Now create the libtool archive.
     case $output in
     *.la)
       old_library=
       test "$build_old_libs" = yes && old_library="$libname.$libext"

       func_verbose "creating $output"

 
       # Preserve any variables that may affect compiler behavior
       for var in $variables_saved_for_relink; do
 	if eval test -z \"\${$var+set}\"; then

 	  relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"

 	elif eval var_value=\$$var; test -z "$var_value"; then
 	  relink_command="$var=; export $var; $relink_command"
 	else

 	  func_quote_for_eval "$var_value"
 	  relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"

 	fi
       done
       # Quote the link command for shipping.
       relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"

       relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`

       if test "$hardcode_automatic" = yes ; then
 	relink_command=
       fi
 
       # Only create the output if not a dry run.

       $opt_dry_run || {

 	for installed in no yes; do
 	  if test "$installed" = yes; then
 	    if test -z "$install_libdir"; then
 	      break
 	    fi
 	    output="$output_objdir/$outputname"i
 	    # Replace all uninstalled libtool libraries with the installed ones
 	    newdependency_libs=
 	    for deplib in $dependency_libs; do
 	      case $deplib in
 	      *.la)

 		func_basename "$deplib"
 		name="$func_basename_result"

 		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`

 		test -z "$libdir" && \
 		  func_fatal_error "\`$deplib' is not a valid libtool archive"

 		newdependency_libs="$newdependency_libs $libdir/$name"

 		;;

 	      *) newdependency_libs="$newdependency_libs $deplib" ;;

 	      esac
 	    done
 	    dependency_libs="$newdependency_libs"
 	    newdlfiles=

 	    for lib in $dlfiles; do

 	      case $lib in
 	      *.la)
 	        func_basename "$lib"
 		name="$func_basename_result"
 		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
 		test -z "$libdir" && \
 		  func_fatal_error "\`$lib' is not a valid libtool archive"
 		newdlfiles="$newdlfiles $libdir/$name"
 		;;
 	      *) newdlfiles="$newdlfiles $lib" ;;
 	      esac

 	    done
 	    dlfiles="$newdlfiles"
 	    newdlprefiles=
 	    for lib in $dlprefiles; do

 	      case $lib in
 	      *.la)
 		# Only pass preopened files to the pseudo-archive (for
 		# eventual linking with the app. that links it) if we
 		# didn't already link the preopened objects directly into
 		# the library:
 		func_basename "$lib"
 		name="$func_basename_result"
 		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
 		test -z "$libdir" && \
 		  func_fatal_error "\`$lib' is not a valid libtool archive"
 		newdlprefiles="$newdlprefiles $libdir/$name"
 		;;
 	      esac

 	    done
 	    dlprefiles="$newdlprefiles"
 	  else
 	    newdlfiles=
 	    for lib in $dlfiles; do
 	      case $lib in
 		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
 		*) abs=`pwd`"/$lib" ;;
 	      esac
 	      newdlfiles="$newdlfiles $abs"
 	    done
 	    dlfiles="$newdlfiles"
 	    newdlprefiles=
 	    for lib in $dlprefiles; do
 	      case $lib in
 		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
 		*) abs=`pwd`"/$lib" ;;
 	      esac
 	      newdlprefiles="$newdlprefiles $abs"
 	    done
 	    dlprefiles="$newdlprefiles"
 	  fi

 	  $RM $output

 	  # place dlname in correct position for cygwin
 	  tdlname=$dlname
 	  case $host,$output,$installed,$module,$dlname in

 	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;

 	  esac

 	  $ECHO > $output "\

 # $outputname - a libtool library file

 # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION

 #
 # Please DO NOT delete this file!
 # It is necessary for linking the library.
 
 # The name that we can dlopen(3).
 dlname='$tdlname'
 
 # Names of this library.
 library_names='$library_names'
 
 # The name of the static archive.
 old_library='$old_library'
 

 # Linker flags that can not go in dependency_libs.
 inherited_linker_flags='$new_inherited_linker_flags'
 

 # Libraries that this one depends upon.
 dependency_libs='$dependency_libs'
 

 # Names of additional weak libraries provided by this library
 weak_library_names='$weak_libs'
 

 # Version information for $libname.
 current=$current
 age=$age
 revision=$revision
 
 # Is this an already installed library?
 installed=$installed
 
 # Should we warn about portability when linking against -modules?
 shouldnotlink=$module
 
 # Files to dlopen/dlpreopen
 dlopen='$dlfiles'
 dlpreopen='$dlprefiles'
 
 # Directory that this library needs to be installed in:
 libdir='$install_libdir'"
 	  if test "$installed" = no && test "$need_relink" = yes; then

 	    $ECHO >> $output "\

 relink_command=\"$relink_command\""
 	  fi
 	done

       }

 
       # Do a symbolic link so that the libtool archive can be found in
       # LD_LIBRARY_PATH before the program is installed.

       func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'

       ;;
     esac
     exit $EXIT_SUCCESS

 }

 { test "$mode" = link || test "$mode" = relink; } &&
     func_mode_link ${1+"$@"}

 # func_mode_uninstall arg...
 func_mode_uninstall ()
 {
     $opt_debug
     RM="$nonopt"

     files=
     rmforce=
     exit_status=0
 
     # This variable tells wrapper scripts just to set variables rather
     # than running their programs.
     libtool_install_magic="$magic"
 
     for arg
     do
       case $arg in

       -f) RM="$RM $arg"; rmforce=yes ;;
       -*) RM="$RM $arg" ;;

       *) files="$files $arg" ;;
       esac
     done
 

     test -z "$RM" && \
       func_fatal_help "you must specify an RM program"

 
     rmdirs=
 
     origobjdir="$objdir"
     for file in $files; do

       func_dirname "$file" "" "."
       dir="$func_dirname_result"
       if test "X$dir" = X.; then

 	objdir="$origobjdir"
       else
 	objdir="$dir/$origobjdir"
       fi

       func_basename "$file"
       name="$func_basename_result"

       test "$mode" = uninstall && objdir="$dir"
 
       # Remember objdir for removal later, being careful to avoid duplicates
       if test "$mode" = clean; then
 	case " $rmdirs " in
 	  *" $objdir "*) ;;
 	  *) rmdirs="$rmdirs $objdir" ;;
 	esac
       fi
 
       # Don't error if the file doesn't exist and rm -f was used.

       if { test -L "$file"; } >/dev/null 2>&1 ||
 	 { test -h "$file"; } >/dev/null 2>&1 ||
 	 test -f "$file"; then

 	:
       elif test -d "$file"; then
 	exit_status=1
 	continue
       elif test "$rmforce" = yes; then
 	continue
       fi
 
       rmfiles="$file"
 
       case $name in
       *.la)
 	# Possibly a libtool archive, so verify it.

 	if func_lalib_p "$file"; then
 	  func_source $dir/$name

 
 	  # Delete the libtool libraries and symlinks.
 	  for n in $library_names; do
 	    rmfiles="$rmfiles $objdir/$n"
 	  done
 	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
 
 	  case "$mode" in
 	  clean)
 	    case "  $library_names " in
 	    # "  " in the beginning catches empty $dlname
 	    *" $dlname "*) ;;
 	    *) rmfiles="$rmfiles $objdir/$dlname" ;;
 	    esac

 	    test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"

 	    ;;
 	  uninstall)
 	    if test -n "$library_names"; then
 	      # Do each command in the postuninstall commands.

 	      func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'

 	    fi
 
 	    if test -n "$old_library"; then
 	      # Do each command in the old_postuninstall commands.

 	      func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'

 	    fi
 	    # FIXME: should reinstall the best remaining shared library.
 	    ;;
 	  esac
 	fi
 	;;
 
       *.lo)
 	# Possibly a libtool object, so verify it.

 	if func_lalib_p "$file"; then

 
 	  # Read the .lo file

 	  func_source $dir/$name

 
 	  # Add PIC object to the list of files to remove.

 	  if test -n "$pic_object" &&
 	     test "$pic_object" != none; then

 	    rmfiles="$rmfiles $dir/$pic_object"
 	  fi
 
 	  # Add non-PIC object to the list of files to remove.

 	  if test -n "$non_pic_object" &&
 	     test "$non_pic_object" != none; then

 	    rmfiles="$rmfiles $dir/$non_pic_object"
 	  fi
 	fi
 	;;
 
       *)
 	if test "$mode" = clean ; then
 	  noexename=$name
 	  case $file in
 	  *.exe)

 	    func_stripname '' '.exe' "$file"
 	    file=$func_stripname_result
 	    func_stripname '' '.exe' "$name"
 	    noexename=$func_stripname_result

 	    # $file with .exe has already been added to rmfiles,
 	    # add $file without .exe
 	    rmfiles="$rmfiles $file"
 	    ;;
 	  esac
 	  # Do a test to see if this is a libtool program.

 	  if func_ltwrapper_p "$file"; then
 	    if func_ltwrapper_executable_p "$file"; then
 	      func_ltwrapper_scriptname "$file"
 	      relink_command=
 	      func_source $func_ltwrapper_scriptname_result
 	      rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
 	    else
 	      relink_command=
 	      func_source $dir/$noexename
 	    fi

 
 	    # note $name still contains .exe if it was in $file originally
 	    # as does the version of $file that was added into $rmfiles
 	    rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
 	    if test "$fast_install" = yes && test -n "$relink_command"; then
 	      rmfiles="$rmfiles $objdir/lt-$name"
 	    fi
 	    if test "X$noexename" != "X$name" ; then
 	      rmfiles="$rmfiles $objdir/lt-${noexename}.c"
 	    fi
 	  fi
 	fi
 	;;
       esac

       func_show_eval "$RM $rmfiles" 'exit_status=1'

     done
     objdir="$origobjdir"
 
     # Try to remove the ${objdir}s in the directories where we deleted files
     for dir in $rmdirs; do
       if test -d "$dir"; then

 	func_show_eval "rmdir $dir >/dev/null 2>&1"

       fi
     done
 
     exit $exit_status

 }

 { test "$mode" = uninstall || test "$mode" = clean; } &&
     func_mode_uninstall ${1+"$@"}

 test -z "$mode" && {
   help="$generic_help"
   func_fatal_help "you must specify a MODE"
 }
 
 test -z "$exec_cmd" && \
   func_fatal_help "invalid operation mode \`$mode'"

 
 if test -n "$exec_cmd"; then

   eval exec "$exec_cmd"

   exit $EXIT_FAILURE
 fi
 

 exit $exit_status

 
 
 # The TAGs below are defined such that we never get into a situation
 # in which we disable both kinds of libraries.  Given conflicting
 # choices, we go for a static library, that is the most portable,
 # since we can't tell whether shared libraries were disabled because
 # the user asked for that or because the platform doesn't support
 # them.  This is particularly important on AIX, because we don't
 # support having both static and shared libraries enabled at the same
 # time on that platform, so we default to a shared-only configuration.
 # If a disable-shared tag is given, we'll fallback to a static-only
 # configuration.  But we'll never go from static-only to shared-only.
 
 # ### BEGIN LIBTOOL TAG CONFIG: disable-shared

 build_libtool_libs=no
 build_old_libs=yes

 # ### END LIBTOOL TAG CONFIG: disable-shared
 
 # ### BEGIN LIBTOOL TAG CONFIG: disable-static

 build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`

 # ### END LIBTOOL TAG CONFIG: disable-static
 
 # Local Variables:
 # mode:shell-script
 # sh-indentation:2
 # End:

 # vi:sw=2