# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2017 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#
#  Copyright (C) 2013-2019 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
#  Copyright (C) 2007-2013 Sourcefire, Inc.
#  Copyright (C) 2002-2007 Tomasz Kojm <tkojm@clamav.net>
#
#  This program is free software; you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#  along with this program; if not, write to the Free Software
#  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
#  MA 02110-1301, USA.



VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
@BUILD_CLAMONACC_TRUE@am__append_1 = clamonacc
@ENABLE_CLAMSUBMIT_TRUE@am__append_2 = clamsubmit
@ENABLE_FUZZ_TRUE@am__append_3 = fuzz
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/acinclude.m4 \
	$(top_srcdir)/m4/ax_check_uname_syscall.m4 \
	$(top_srcdir)/m4/fdpassing.m4 $(top_srcdir)/m4/lib-ld.m4 \
	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
	$(top_srcdir)/m4/lib-prelude.m4 $(top_srcdir)/m4/libtool.m4 \
	$(top_srcdir)/m4/llvm.m4 $(top_srcdir)/m4/ltargz.m4 \
	$(top_srcdir)/m4/ltdl.m4 $(top_srcdir)/m4/ltoptions.m4 \
	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
	$(top_srcdir)/m4/lt~obsolete.m4 \
	$(top_srcdir)/m4/mmap_private.m4 $(top_srcdir)/m4/resolv.m4 \
	$(top_srcdir)/m4/reorganization/version.m4 \
	$(top_srcdir)/m4/reorganization/build_tools.m4 \
	$(top_srcdir)/m4/reorganization/headers.m4 \
	$(top_srcdir)/m4/reorganization/c_options.m4 \
	$(top_srcdir)/m4/reorganization/compiler_checks.m4 \
	$(top_srcdir)/m4/reorganization/linker_checks.m4 \
	$(top_srcdir)/m4/reorganization/code_checks/fuzz.m4 \
	$(top_srcdir)/m4/reorganization/code_checks/functions.m4 \
	$(top_srcdir)/m4/reorganization/code_checks/mpool.m4 \
	$(top_srcdir)/m4/reorganization/code_checks/unit_tests.m4 \
	$(top_srcdir)/m4/reorganization/code_checks/coverage.m4 \
	$(top_srcdir)/m4/reorganization/libs/xml.m4 \
	$(top_srcdir)/m4/reorganization/libs/openssl.m4 \
	$(top_srcdir)/m4/reorganization/libs/json.m4 \
	$(top_srcdir)/m4/reorganization/libs/pcre.m4 \
	$(top_srcdir)/m4/reorganization/libs/libmspack.m4 \
	$(top_srcdir)/m4/reorganization/libs/libz.m4 \
	$(top_srcdir)/m4/reorganization/libs/bzip.m4 \
	$(top_srcdir)/m4/reorganization/libs/unrar.m4 \
	$(top_srcdir)/m4/reorganization/libs/systemd.m4 \
	$(top_srcdir)/m4/reorganization/code_checks/ipv6.m4 \
	$(top_srcdir)/m4/reorganization/code_checks/dns.m4 \
	$(top_srcdir)/m4/reorganization/code_checks/fanotify.m4 \
	$(top_srcdir)/m4/reorganization/code_checks/setpgrp.m4 \
	$(top_srcdir)/m4/reorganization/milter/enable.m4 \
	$(top_srcdir)/m4/reorganization/code_checks/iconv.m4 \
	$(top_srcdir)/m4/reorganization/code_checks/pthreads.m4 \
	$(top_srcdir)/m4/reorganization/code_checks/reentrant.m4 \
	$(top_srcdir)/m4/reorganization/utility_checks/id.m4 \
	$(top_srcdir)/m4/reorganization/utility_checks/yp.m4 \
	$(top_srcdir)/m4/reorganization/usergroup.m4 \
	$(top_srcdir)/m4/reorganization/debug.m4 \
	$(top_srcdir)/m4/reorganization/customversion.m4 \
	$(top_srcdir)/m4/reorganization/nocache.m4 \
	$(top_srcdir)/m4/reorganization/dns.m4 \
	$(top_srcdir)/m4/reorganization/bigstack.m4 \
	$(top_srcdir)/m4/reorganization/dbdir.m4 \
	$(top_srcdir)/m4/reorganization/cfgdir.m4 \
	$(top_srcdir)/m4/reorganization/code_checks/in_port_t.m4 \
	$(top_srcdir)/m4/reorganization/code_checks/in_addr_t.m4 \
	$(top_srcdir)/m4/reorganization/os_checks.m4 \
	$(top_srcdir)/m4/reorganization/milter/check.m4 \
	$(top_srcdir)/m4/reorganization/code_checks/pthread_02.m4 \
	$(top_srcdir)/m4/reorganization/code_checks/ctime.m4 \
	$(top_srcdir)/m4/reorganization/code_checks/socklen_t.m4 \
	$(top_srcdir)/m4/reorganization/clamav_user.m4 \
	$(top_srcdir)/m4/reorganization/code_checks/compiler_attribs.m4 \
	$(top_srcdir)/m4/reorganization/code_checks/select.m4 \
	$(top_srcdir)/m4/reorganization/code_checks/stat64.m4 \
	$(top_srcdir)/m4/reorganization/code_checks/shift.m4 \
	$(top_srcdir)/m4/reorganization/code_checks/features.m4 \
	$(top_srcdir)/m4/reorganization/clamdtop.m4 \
	$(top_srcdir)/m4/reorganization/distcheck.m4 \
	$(top_srcdir)/m4/reorganization/llvm.m4 \
	$(top_srcdir)/libclamav/c++/m4/llvm-opts.m4 \
	$(top_srcdir)/m4/reorganization/sha_collect.m4 \
	$(top_srcdir)/m4/reorganization/yara.m4 \
	$(top_srcdir)/m4/reorganization/code_checks/fts.m4 \
	$(top_srcdir)/m4/reorganization/prelude.m4 \
	$(top_srcdir)/m4/reorganization/bsd.m4 \
	$(top_srcdir)/m4/reorganization/clamonacc.m4 \
	$(top_srcdir)/m4/reorganization/libs/curl.m4 \
	$(top_srcdir)/m4/reorganization/substitutions.m4 \
	$(top_srcdir)/m4/reorganization/strni.m4 \
	$(top_srcdir)/m4/reorganization/types.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
	$(am__configure_deps) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = clamav-config.h $(top_builddir)/libclammspack/config.h
CONFIG_CLEAN_FILES = clamav-config libclamav.pc platform.h \
	docs/man/clamav-milter.8 docs/man/clamav-milter.conf.5 \
	docs/man/clambc.1 docs/man/clamconf.1 docs/man/clamd.8 \
	docs/man/clamd.conf.5 docs/man/clamdscan.1 docs/man/clamscan.1 \
	docs/man/freshclam.1 docs/man/freshclam.conf.5 \
	docs/man/sigtool.1 docs/man/clamdtop.1 docs/man/clamsubmit.1 \
	clamav-types.h clamav-version.h
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)" \
	"$(DESTDIR)$(includedir)"
SCRIPTS = $(bin_SCRIPTS)
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
DATA = $(pkgconfig_DATA)
HEADERS = $(nodist_include_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	cscope distdir dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
	$(LISP)clamav-config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
DIST_SUBDIRS = libltdl libclamav libfreshclam clamscan clamd clamdscan \
	freshclam sigtool clamconf database docs etc clamav-milter \
	test clamdtop clambc unit_tests clamonacc clamsubmit fuzz
am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/clamav-config.h.in \
	$(srcdir)/clamav-config.in $(srcdir)/clamav-types.h.in \
	$(srcdir)/clamav-version.h.in $(srcdir)/libclamav.pc.in \
	$(srcdir)/platform.h.in $(top_srcdir)/config/ar-lib \
	$(top_srcdir)/config/compile $(top_srcdir)/config/config.guess \
	$(top_srcdir)/config/config.rpath \
	$(top_srcdir)/config/config.sub \
	$(top_srcdir)/config/install-sh $(top_srcdir)/config/ltmain.sh \
	$(top_srcdir)/config/missing \
	$(top_srcdir)/docs/man/clamav-milter.8.in \
	$(top_srcdir)/docs/man/clamav-milter.conf.5.in \
	$(top_srcdir)/docs/man/clambc.1.in \
	$(top_srcdir)/docs/man/clamconf.1.in \
	$(top_srcdir)/docs/man/clamd.8.in \
	$(top_srcdir)/docs/man/clamd.conf.5.in \
	$(top_srcdir)/docs/man/clamdscan.1.in \
	$(top_srcdir)/docs/man/clamdtop.1.in \
	$(top_srcdir)/docs/man/clamscan.1.in \
	$(top_srcdir)/docs/man/clamsubmit.1.in \
	$(top_srcdir)/docs/man/freshclam.1.in \
	$(top_srcdir)/docs/man/freshclam.conf.5.in \
	$(top_srcdir)/docs/man/sigtool.1.in \
	$(top_srcdir)/libclammspack/config.h.in COPYING config/ar-lib \
	config/compile config/config.guess config/config.rpath \
	config/config.sub config/depcomp config/install-sh \
	config/ltmain.sh config/missing config/ylwrap
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  if test -d "$(distdir)"; then \
    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
      && rm -rf "$(distdir)" \
      || { sleep 5 && rm -rf "$(distdir)"; }; \
  else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
GZIP_ENV = --best
DIST_TARGETS = dist-bzip2 dist-gzip
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BUILD_CONFIGURE_FLAGS = @BUILD_CONFIGURE_FLAGS@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFGDIR = @CFGDIR@
CFLAGS = @CFLAGS@
CHECK_CFLAGS = @CHECK_CFLAGS@
CHECK_CPPFLAGS = @CHECK_CPPFLAGS@
CHECK_LIBS = @CHECK_LIBS@
CLAMAVGROUP = @CLAMAVGROUP@
CLAMAVUSER = @CLAMAVUSER@
CLAMAV_MILTER_CPPFLAGS = @CLAMAV_MILTER_CPPFLAGS@
CLAMAV_MILTER_LIBS = @CLAMAV_MILTER_LIBS@
CLAMBC_CPPFLAGS = @CLAMBC_CPPFLAGS@
CLAMBC_LIBS = @CLAMBC_LIBS@
CLAMCONF_CPPFLAGS = @CLAMCONF_CPPFLAGS@
CLAMCONF_LIBS = @CLAMCONF_LIBS@
CLAMDSCAN_CPPFLAGS = @CLAMDSCAN_CPPFLAGS@
CLAMDSCAN_LIBS = @CLAMDSCAN_LIBS@
CLAMDTOP_CPPFLAGS = @CLAMDTOP_CPPFLAGS@
CLAMDTOP_LIBS = @CLAMDTOP_LIBS@
CLAMD_CPPFLAGS = @CLAMD_CPPFLAGS@
CLAMD_LIBS = @CLAMD_LIBS@
CLAMMEM_CPPFLAGS = @CLAMMEM_CPPFLAGS@
CLAMMEM_LIBS = @CLAMMEM_LIBS@
CLAMONACC_CPPFLAGS = @CLAMONACC_CPPFLAGS@
CLAMONACC_LIBS = @CLAMONACC_LIBS@
CLAMSCAN_CPPFLAGS = @CLAMSCAN_CPPFLAGS@
CLAMSCAN_LIBS = @CLAMSCAN_LIBS@
CLAMSUBMIT_CFLAGS = @CLAMSUBMIT_CFLAGS@
CLAMSUBMIT_LIBS = @CLAMSUBMIT_LIBS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CURL_CPPFLAGS = @CURL_CPPFLAGS@
CURL_LDFLAGS = @CURL_LDFLAGS@
CURL_LIBS = @CURL_LIBS@
CURSES_CPPFLAGS = @CURSES_CPPFLAGS@
CURSES_LIBS = @CURSES_LIBS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DBDIR = @DBDIR@
DEFINE_SF32_PREFIX = @DEFINE_SF32_PREFIX@
DEFINE_SF64_PREFIX = @DEFINE_SF64_PREFIX@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FRESHCLAM_CPPFLAGS = @FRESHCLAM_CPPFLAGS@
FRESHCLAM_LIBS = @FRESHCLAM_LIBS@
GCOV = @GCOV@
GENERATE_WARNING = @GENERATE_WARNING@
GENHTML = @GENHTML@
GETENT = @GETENT@
GPERF = @GPERF@
GREP = @GREP@
HAVE_STRNI = @HAVE_STRNI@
HAVE_YARA = @HAVE_YARA@
ICONV_CPPFLAGS = @ICONV_CPPFLAGS@
ICONV_LDFLAGS = @ICONV_LDFLAGS@
INCLTDL = @INCLTDL@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INT16_DEF = @INT16_DEF@
INT32_DEF = @INT32_DEF@
INT64_DEF = @INT64_DEF@
INT8_DEF = @INT8_DEF@
INT_TYPES_HEADER = @INT_TYPES_HEADER@
JSON_CPPFLAGS = @JSON_CPPFLAGS@
JSON_LDFLAGS = @JSON_LDFLAGS@
JSON_LIBS = @JSON_LIBS@
LCOV = @LCOV@
LD = @LD@
LDFLAGS = @LDFLAGS@
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBADD_DL = @LIBADD_DL@
LIBADD_DLD_LINK = @LIBADD_DLD_LINK@
LIBADD_DLOPEN = @LIBADD_DLOPEN@
LIBADD_SHL_LOAD = @LIBADD_SHL_LOAD@
LIBBZ2 = @LIBBZ2@
LIBBZ2_PREFIX = @LIBBZ2_PREFIX@
LIBCLAMAV_CPPFLAGS = @LIBCLAMAV_CPPFLAGS@
LIBCLAMAV_LIBS = @LIBCLAMAV_LIBS@
LIBCLAMAV_VERSION = @LIBCLAMAV_VERSION@
LIBCLAMAV_VERSION_NUM = @LIBCLAMAV_VERSION_NUM@
LIBCLAMSHARED_CPPFLAGS = @LIBCLAMSHARED_CPPFLAGS@
LIBFRESHCLAM_VERSION = @LIBFRESHCLAM_VERSION@
LIBFRESHCLAM_VERSION_NUM = @LIBFRESHCLAM_VERSION_NUM@
LIBLTDL = @LIBLTDL@
LIBM = @LIBM@
LIBMSPACK_CFLAGS = @LIBMSPACK_CFLAGS@
LIBMSPACK_LIBS = @LIBMSPACK_LIBS@
LIBOBJS = @LIBOBJS@
LIBPRELUDE_CFLAGS = @LIBPRELUDE_CFLAGS@
LIBPRELUDE_CONFIG = @LIBPRELUDE_CONFIG@
LIBPRELUDE_CONFIG_PREFIX = @LIBPRELUDE_CONFIG_PREFIX@
LIBPRELUDE_LDFLAGS = @LIBPRELUDE_LDFLAGS@
LIBPRELUDE_LIBS = @LIBPRELUDE_LIBS@
LIBPRELUDE_PREFIX = @LIBPRELUDE_PREFIX@
LIBPRELUDE_PTHREAD_CFLAGS = @LIBPRELUDE_PTHREAD_CFLAGS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTDLDEPS = @LTDLDEPS@
LTDLINCL = @LTDLINCL@
LTDLOPEN = @LTDLOPEN@
LTLIBBZ2 = @LTLIBBZ2@
LTLIBOBJS = @LTLIBOBJS@
LT_ARGZ_H = @LT_ARGZ_H@
LT_CONFIG_H = @LT_CONFIG_H@
LT_DLLOADERS = @LT_DLLOADERS@
LT_DLPREOPEN = @LT_DLPREOPEN@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJC = @OBJC@
OBJCDEPMODE = @OBJCDEPMODE@
OBJCFLAGS = @OBJCFLAGS@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PACKAGE_VERSION_NUM = @PACKAGE_VERSION_NUM@
PATH_SEPARATOR = @PATH_SEPARATOR@
PCRE_CPPFLAGS = @PCRE_CPPFLAGS@
PCRE_LIBS = @PCRE_LIBS@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SIGTOOL_CPPFLAGS = @SIGTOOL_CPPFLAGS@
SSL_CPPFLAGS = @SSL_CPPFLAGS@
SSL_LDFLAGS = @SSL_LDFLAGS@
SSL_LIBS = @SSL_LIBS@
STRIP = @STRIP@
SYSTEMD_CFLAGS = @SYSTEMD_CFLAGS@
SYSTEMD_LIBS = @SYSTEMD_LIBS@
THREAD_LIBS = @THREAD_LIBS@
TH_SAFE = @TH_SAFE@
UINT16_DEF = @UINT16_DEF@
UINT32_DEF = @UINT32_DEF@
UINT64_DEF = @UINT64_DEF@
UINT8_DEF = @UINT8_DEF@
VERSION = @VERSION@
VERSIONSCRIPTFLAG = @VERSIONSCRIPTFLAG@
WERR_CFLAGS = @WERR_CFLAGS@
WERR_CFLAGS_MILTER = @WERR_CFLAGS_MILTER@
XML_CPPFLAGS = @XML_CPPFLAGS@
XML_LIBS = @XML_LIBS@
YACC = @YACC@
YFLAGS = @YFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
ac_ct_OBJC = @ac_ct_OBJC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
curl_config = @curl_config@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
llvmconfig = @llvmconfig@
localedir = @localedir@
localstatedir = @localstatedir@
ltdl_LIBOBJS = @ltdl_LIBOBJS@
ltdl_LTLIBOBJS = @ltdl_LTLIBOBJS@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pcreconfig = @pcreconfig@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
subdirs = @subdirs@
sys_symbol_underscore = @sys_symbol_underscore@
sysconfdir = @sysconfdir@
systemdsystemunitdir = @systemdsystemunitdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
xmlconfig = @xmlconfig@
ACLOCAL_AMFLAGS = -I m4
SUBDIRS = libltdl libclamav libfreshclam clamscan clamd clamdscan \
	freshclam sigtool clamconf database docs etc clamav-milter \
	test clamdtop clambc unit_tests $(am__append_1) \
	$(am__append_2) $(am__append_3)
EXTRA_DIST = examples shared libclamav.pc.in COPYING.bzip2 COPYING.lzma COPYING.unrar COPYING.LGPL COPYING.llvm COPYING.file COPYING.zlib COPYING.getopt COPYING.regex COPYING.YARA COPYING.pcre platform.h.in libclamunrar libclamunrar_iface libclammspack clamdscan/clamdscan.map win32 ChangeLog.md INSTALL.md NEWS.md README.md
bin_SCRIPTS = clamav-config
pkgconfigdir = $(libdir)/pkgconfig
pkgconfig_DATA = libclamav.pc
nodist_include_HEADERS = clamav-types.h clamav-version.h

# don't complain that configuration files and databases are not removed, this is intended
distuninstallcheck_listfiles = find . -type f ! -name clamd.conf ! -name freshclam.conf ! -name daily.cvd ! -name main.cvd -print
DISTCLEANFILES = target.h
DISTCHECK_CONFIGURE_FLAGS = --enable-milter --disable-clamav --enable-all-jit-targets --enable-llvm=yes --with-system-llvm=no --with-systemdsystemunitdir=$$dc_install_base/$(systemdsystemunitdir) CC="$(CC)" CXX="$(CXX)" YACC="$(YACC)" LEX="$(LEX)" AR="$(AR)" AS="$(AS)"
all: clamav-config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
am--refresh: Makefile
	@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

clamav-config.h: stamp-h1
	@test -f $@ || rm -f stamp-h1
	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1

stamp-h1: $(srcdir)/clamav-config.h.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status clamav-config.h
$(srcdir)/clamav-config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
	rm -f stamp-h1
	touch $@

libclammspack/config.h: libclammspack/stamp-h2
	@test -f $@ || rm -f libclammspack/stamp-h2
	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) libclammspack/stamp-h2

libclammspack/stamp-h2: $(top_srcdir)/libclammspack/config.h.in $(top_builddir)/config.status
	@rm -f libclammspack/stamp-h2
	cd $(top_builddir) && $(SHELL) ./config.status libclammspack/config.h

distclean-hdr:
	-rm -f clamav-config.h stamp-h1 libclammspack/config.h libclammspack/stamp-h2
clamav-config: $(top_builddir)/config.status $(srcdir)/clamav-config.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
libclamav.pc: $(top_builddir)/config.status $(srcdir)/libclamav.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
platform.h: $(top_builddir)/config.status $(srcdir)/platform.h.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
docs/man/clamav-milter.8: $(top_builddir)/config.status $(top_srcdir)/docs/man/clamav-milter.8.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
docs/man/clamav-milter.conf.5: $(top_builddir)/config.status $(top_srcdir)/docs/man/clamav-milter.conf.5.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
docs/man/clambc.1: $(top_builddir)/config.status $(top_srcdir)/docs/man/clambc.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
docs/man/clamconf.1: $(top_builddir)/config.status $(top_srcdir)/docs/man/clamconf.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
docs/man/clamd.8: $(top_builddir)/config.status $(top_srcdir)/docs/man/clamd.8.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
docs/man/clamd.conf.5: $(top_builddir)/config.status $(top_srcdir)/docs/man/clamd.conf.5.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
docs/man/clamdscan.1: $(top_builddir)/config.status $(top_srcdir)/docs/man/clamdscan.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
docs/man/clamscan.1: $(top_builddir)/config.status $(top_srcdir)/docs/man/clamscan.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
docs/man/freshclam.1: $(top_builddir)/config.status $(top_srcdir)/docs/man/freshclam.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
docs/man/freshclam.conf.5: $(top_builddir)/config.status $(top_srcdir)/docs/man/freshclam.conf.5.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
docs/man/sigtool.1: $(top_builddir)/config.status $(top_srcdir)/docs/man/sigtool.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
docs/man/clamdtop.1: $(top_builddir)/config.status $(top_srcdir)/docs/man/clamdtop.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
docs/man/clamsubmit.1: $(top_builddir)/config.status $(top_srcdir)/docs/man/clamsubmit.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
clamav-types.h: $(top_builddir)/config.status $(srcdir)/clamav-types.h.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
clamav-version.h: $(top_builddir)/config.status $(srcdir)/clamav-version.h.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
install-binSCRIPTS: $(bin_SCRIPTS)
	@$(NORMAL_INSTALL)
	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n' \
	    -e 'h;s|.*|.|' \
	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
	      if (++n[d] == $(am__install_max)) { \
		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
	    else { print "f", d "/" $$4, $$1 } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	     test -z "$$files" || { \
	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
	     } \
	; done

uninstall-binSCRIPTS:
	@$(NORMAL_UNINSTALL)
	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
	files=`for p in $$list; do echo "$$p"; done | \
	       sed -e 's,.*/,,;$(transform)'`; \
	dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)

installcheck-binSCRIPTS: $(bin_SCRIPTS)
	bad=0; pid=$$$$; list="$(bin_SCRIPTS)"; for p in $$list; do \
	  case ' $(AM_INSTALLCHECK_STD_OPTIONS_EXEMPT) ' in \
	   *" $$p "* | *" $(srcdir)/$$p "*) continue;; \
	  esac; \
	  f=`echo "$$p" | sed 's,^.*/,,;$(transform)'`; \
	  for opt in --help --version; do \
	    if "$(DESTDIR)$(bindir)/$$f" $$opt >c$${pid}_.out \
	         2>c$${pid}_.err </dev/null \
		 && test -n "`cat c$${pid}_.out`" \
		 && test -z "`cat c$${pid}_.err`"; then :; \
	    else echo "$$f does not support $$opt" 1>&2; bad=1; fi; \
	  done; \
	done; rm -f c$${pid}_.???; exit $$bad

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool config.lt
install-pkgconfigDATA: $(pkgconfig_DATA)
	@$(NORMAL_INSTALL)
	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
	done

uninstall-pkgconfigDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
install-nodist_includeHEADERS: $(nodist_include_HEADERS)
	@$(NORMAL_INSTALL)
	@list='$(nodist_include_HEADERS)'; test -n "$(includedir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
	done

uninstall-nodist_includeHEADERS:
	@$(NORMAL_UNINSTALL)
	@list='$(nodist_include_HEADERS)'; test -n "$(includedir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir)

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
	test ! -s cscope.files \
	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
	-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files

distdir: $(DISTFILES)
	$(am__remove_distdir)
	test -d "$(distdir)" || mkdir "$(distdir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
	$(am__post_remove_distdir)
dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
	$(am__post_remove_distdir)

dist-lzip: distdir
	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
	$(am__post_remove_distdir)

dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
	$(am__post_remove_distdir)

dist-tarZ: distdir
	@echo WARNING: "Support for distribution archives compressed with" \
		       "legacy program 'compress' is deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__post_remove_distdir)

dist-shar: distdir
	@echo WARNING: "Support for shar distribution archives is" \
	               "deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
	$(am__post_remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__post_remove_distdir)

dist dist-all:
	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
	$(am__post_remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lz*) \
	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir)
	chmod u+w $(distdir)
	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
	chmod a-w $(distdir)
	test -d $(distdir)/_build || exit 0; \
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build/sub \
	  && ../../configure \
	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	    --srcdir=../.. --prefix="$$dc_install_base" \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__post_remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@test -n '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: trying to run $@ with an empty' \
	       '$$(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	$(am__cd) '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(SCRIPTS) $(DATA) $(HEADERS) clamav-config.h
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(includedir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr \
	distclean-libtool distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-nodist_includeHEADERS install-pkgconfigDATA

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-binSCRIPTS

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am: installcheck-binSCRIPTS

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-binSCRIPTS uninstall-nodist_includeHEADERS \
	uninstall-pkgconfigDATA

.MAKE: $(am__recursive_targets) all install-am install-strip

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
	am--refresh check check-am clean clean-cscope clean-generic \
	clean-libtool cscope cscopelist-am ctags ctags-am dist \
	dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
	dist-tarZ dist-xz dist-zip distcheck distclean \
	distclean-generic distclean-hdr distclean-libtool \
	distclean-tags distcleancheck distdir distuninstallcheck dvi \
	dvi-am html html-am info info-am install install-am \
	install-binSCRIPTS install-data install-data-am install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-nodist_includeHEADERS install-pdf install-pdf-am \
	install-pkgconfigDATA install-ps install-ps-am install-strip \
	installcheck installcheck-am installcheck-binSCRIPTS \
	installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
	uninstall-am uninstall-binSCRIPTS \
	uninstall-nodist_includeHEADERS uninstall-pkgconfigDATA

.PRECIOUS: Makefile

lcov:
	($(MAKE); cd unit_tests; $(MAKE) lcov)
quick-check:
	($(MAKE); cd unit_tests; $(MAKE) quick-check)
fuzz-all:
	($(MAKE); cd fuzz; $(MAKE) all)
fuzz-check:
	($(MAKE); cd fuzz; $(MAKE) check)

dist-hook:
	rm -rf $(distdir)/win32/clamav-for-windows $(distdir)/win32/build

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: