@@ -96,191 +96,10 @@ function configure_database_mysql {

     iniset -sudo $my_conf mysqld bind-address "$SERVICE_LISTEN_ADDRESS"

     iniset -sudo $my_conf mysqld sql_mode TRADITIONAL

     iniset -sudo $my_conf mysqld default-storage-engine InnoDB

-

-    # the number of connections has been throttled to 256. In the

-    # event that the gate jobs report "Too many connections" it is

-    # indicative of a problem that could be the result of one of many

-    # things. For more details about debugging this error, refer

-    # https://dev.mysql.com/doc/refman/5.5/en/too-many-connections.html.

-    # Note that the problem may not ONLY be an issue with MySQL

-    # connections. If the number of fd's at the OS is too low, you

-    # could see errors manifest as MySQL "too many connections".

-    iniset -sudo $my_conf mysqld max_connections 256

+    iniset -sudo $my_conf mysqld max_connections 1024

     iniset -sudo $my_conf mysqld query_cache_type OFF

     iniset -sudo $my_conf mysqld query_cache_size 0

-    # Additional settings to put MySQL on a memory diet. These

-    # settings are used in conjunction with the cap on max_connections

-    # as the total memory used by MySQL can be simply viewed as

-    # fixed-allocations + max_connections * variable-allocations. A

-    # nifty tool to help with this is

-    # http://www.mysqlcalculator.com/. A short description of each of

-    # the settings follows.

-

-    # binlog_cache_size, determines the size of cache to hold changes

-    # to the binary log during a transaction, for each connection. For

-    # more details, refer

-    # https://dev.mysql.com/doc/refman/5.6/en/replication-options-binary-log.html#sysvar_binlog_cache_size

-    # When binary logging is enabled, a smaller binlog cache could

-    # result in more frequent flushes to the disk and a larger value

-    # would result in less flushes to the disk but higher memory

-    # usage. This however only has to do with large transactions; if

-    # you have a small transaction the binlog cache is necessarily

-    # flushed on a transaction commit. This is a per-connection cache.

-    iniset -sudo $my_conf mysqld binlog_cache_size 4K

-

-    # binlog_stmt_cache_size determines the size of cache to hold non

-    # transactional statements in the binary log. For more details,

-    # refer

-    # https://dev.mysql.com/doc/refman/5.6/en/replication-options-binary-log.html#sysvar_binlog_stmt_cache_size

-    # This cache holds changes to non-transactional tables (read:

-    # MyISAM) or any non-transactional statements which cause

-    # modifications to data (truncate is an example). These are

-    # written to disk immediately on completion of the statement or

-    # when the cache is full. If the cache is too small, you get

-    # frequent writes to the disk (flush) and if the cache is too

-    # large, it takes up more memory. This is a per-connection cache.

-    iniset -sudo $my_conf mysqld binlog_stmt_cache_size 4K

-

-    # bulk_insert_buffer_size for MyISAM tables that use a special

-    # cache for insert statements and load statements, this cache is

-    # used to optimize writes to the disk. If the value is set to 0,

-    # the optimization is disabled. For more details refer

-    # https://dev.mysql.com/doc/refman/5.7/en/server-system-variables.html#sysvar_bulk_insert_buffer_size

-    # We set this to 0 which could result in higher disk I/O (I/O on

-    # each insert block completion).

-    iniset -sudo $my_conf mysqld bulk_insert_buffer_size 0

-

-    # host_cache_size controls a DNS lookup optimization. For more

-    # details refer

-    # https://dev.mysql.com/doc/refman/5.6/en/host-cache.html

-    iniset -sudo $my_conf mysqld host_cache_size 0

-

-    # innodb_buffer_pool_size This is the size of the server wide

-    # buffer pool. It is the cache for all data blocks being used by

-    # the server and is managed as a LRU chain. Dirty blocks either

-    # age off the list or are forced off when the list is

-    # full. Setting this to 5MB (default 128MB) reduces the amount of

-    # memory used by the server and this will result in more disk I/O

-    # in cases where (a) there is considerable write activity that

-    # overwhelms the allocated cache, or (b) there is considerable

-    # read activity on a data set that exceeds the allocated

-    # cache. For more details, refer

-    # https://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_buffer_pool_size

-    iniset -sudo $my_conf mysqld innodb_buffer_pool_size 5M

-

-    # innodb_ft_cache_size and innodb_ft_total_cache_size control the

-    # per-connection full text search cache and the server wide

-    # maximum full text search cache. We should not be using full text

-    # search and the value is set to the minimum allowable. The former

-    # is a per-connection cache size and the latter is server

-    # wide. For more details, refer

-    # https://dev.mysql.com/doc/refman/5.7/en/innodb-parameters.html#sysvar_innodb_ft_cache_size

-    # and

-    # https://dev.mysql.com/doc/refman/5.7/en/innodb-parameters.html#sysvar_innodb_ft_total_cache_size

-    iniset -sudo $my_conf mysqld innodb_ft_cache_size 1600000

-    iniset -sudo $my_conf mysqld innodb_ft_total_cache_size 32000000

-

-    # innodb_log_buffer_size This buffer is used to buffer

-    # transactions in-memory before writing them to the innodb

-    # internal transaction log. Large transactions, or high amounts of

-    # concurrency, will cause the system to fill this faster and thus

-    # make the system more disk-bound. For more details, refer

-    # https://dev.mysql.com/doc/refman/5.7/en/innodb-parameters.html#sysvar_innodb_log_buffer_size

-    iniset -sudo $my_conf mysqld innodb_log_buffer_size 256K

-

-    # innodb_sort_buffer_size, This buffer is used for sorting when

-    # InnoDB is creating indexes. Could cause that to be slower, but

-    # only if tables are large. This is a per-connection setting. For

-    # more details, refer

-    # https://dev.mysql.com/doc/refman/5.7/en/innodb-parameters.html#sysvar_innodb_sort_buffer_size

-    iniset -sudo $my_conf mysqld innodb_sort_buffer_size 64K

-

-    # join_buffer_size, This buffer makes table and index scans

-    # faster. So this setting could make some queries more disk

-    # bound. This is a per-connection setting. For more details refer

-    # https://dev.mysql.com/doc/refman/5.7/en/server-system-variables.html#sysvar_join_buffer_size.

-    iniset -sudo $my_conf mysqld join_buffer_size 128

-

-    # key_buffer_size defines the index blocks used for MyISAM tables

-    # and shared between threads. This is a server wide setting. For

-    # more details see

-    # https://dev.mysql.com/doc/refman/5.7/en/server-system-variables.html#sysvar_key_buffer_size

-    iniset -sudo $my_conf mysqld key_buffer_size 8

-

-    # max_heap_table_size sets the maximum amount of memory for MEMORY

-    # tables (which we don't use). The value is set to 16k, the

-    # minimum allowed. For more details, see

-    # https://dev.mysql.com/doc/refman/5.7/en/server-system-variables.html#sysvar_max_heap_table_size

-    iniset -sudo $my_conf mysqld max_heap_table_size 16K

-

-    # net_buffer_length Each client has a buffer for incoming and

-    # outgoing data, both start with a size of net_buffer_length and

-    # can grow (in steps of 2x) upto a size of max_allowed_packet. For

-    # more details see

-    # https://dev.mysql.com/doc/refman/5.7/en/server-system-variables.html#sysvar_net_buffer_length

-    iniset -sudo $my_conf mysqld net_buffer_length 1K

-

-    # read_buffer_size, read_rnd_buffer_size are per-thread buffer

-    # used for scans on MyISAM tables. It is a per-connection setting

-    # and so we set it to the minimum value allowable. Same for

-    # read_rnd_buffer_size. For more details refer

-    # https://dev.mysql.com/doc/refman/5.6/en/server-system-variables.html#sysvar_read_buffer_size

-    # and

-    # https://dev.mysql.com/doc/refman/5.6/en/server-system-variables.html#sysvar_read_rnd_buffer_size

-    iniset -sudo $my_conf mysqld read_buffer_size 8200

-    iniset -sudo $my_conf mysqld read_rnd_buffer_size 8200

-

-    # sort_buffer_size when a sort is requested, it will be performed

-    # in memory in a buffer of this size (allocated per connection)

-    # and if the data exceeds this size it will spill to disk. The

-    # innodb and myisam variables are used in computing indices for

-    # tables using the specified storage engine. Since we don't

-    # dynamically reindex (except during upgrade) these values should

-    # never be material. Obviously performance of disk based sorts is

-    # worse than in memory sorts and therefore a high value here will

-    # improve sort performance for large data. For more details,

-    # refer:

-    # https://dev.mysql.com/doc/refman/5.7/en/server-system-variables.html#sysvar_sort_buffer_size

-    # and

-    # https://dev.mysql.com/doc/refman/5.7/en/innodb-parameters.html#sysvar_innodb_sort_buffer_size

-    # and

-    # https://dev.mysql.com/doc/refman/5.7/en/server-system-variables.html#sysvar_myisam_sort_buffer_size

-    iniset -sudo $my_conf mysqld sort_buffer_size 32K

-    iniset -sudo $my_conf mysqld innodb_sort_buffer_size 64K

-    iniset -sudo $my_conf mysqld myisam_sort_buffer_size 4K

-

-    # thread_cache_size specifies how many internal threads to cache

-    # for use with incoming connections. We set this to 0 whic means

-    # that each connection will cause a new thread to be created. This

-    # could cause connections to take marginally longer on os'es with

-    # slow pthread_create calls. For more details, refer

-    # https://dev.mysql.com/doc/refman/5.7/en/server-system-variables.html#sysvar_thread_cache_size

-    iniset -sudo $my_conf mysqld thread_cache_size 0

-

-    # thread_stack is the per connection stack size, the minimum is

-    # 128k and the default is 192k on 32bit and 256k on 64bit

-    # systems. We set this to 192k. Complex queries which require

-    # recursion, stored procedures or other memory intensive

-    # operations could exhaust this and generate a very characteristic

-    # failure ("stack overflow") which is cleanly detected and the

-    # query is killed. For more details see

-    # https://dev.mysql.com/doc/refman/5.6/en/server-system-variables.html#sysvar_thread_stack

-    iniset -sudo $my_conf mysqld thread_stack 196608

-

-    # tmp_table_size is the maximum size of an in-memory temporary

-    # table. Temporary tables are created by MySQL as part of a

-    # multi-step query plan. The actual size of the temp table will be

-    # the lesser of tmp_table_size and max_heap_table_size. If a

-    # temporary table exceeds this size, it will be spooled to disk

-    # using the internal_tmp_disk_storage_engine (default

-    # MyISAM). Queries that often generate in-memory temporary tables

-    # include queries that have sorts, distinct, or group by

-    # operations, also queries that perform IN joins. For more details

-    # see

-    # https://dev.mysql.com/doc/refman/5.7/en/server-system-variables.html#sysvar_tmp_table_size

-    iniset -sudo $my_conf mysqld tmp_table_size 1K

-

     if [[ "$DATABASE_QUERY_LOGGING" == "True" ]]; then

         echo_summary "Enabling MySQL query logging"

         if is_fedora; then