deleted file mode 100755

@@ -1,29 +0,0 @@

-#!/usr/bin/env bash

-

-# Echo commands

-set -o xtrace

-

-# Head node host, which runs glance, api, keystone

-HEAD_PUB_IP=${HEAD_PUB_IP:-192.168.1.57}

-HEAD_MGT_IP=${HEAD_MGT_IP:-172.16.100.57}

-

-COMPUTE_PUB_IP=${COMPUTE_PUB_IP:-192.168.1.58}

-COMPUTE_MGT_IP=${COMPUTE_MGT_IP:-172.16.100.58}

-

-# Networking params

-FLOATING_RANGE=${FLOATING_RANGE:-192.168.1.196/30}

-

-# Variables common amongst all hosts in the cluster

-COMMON_VARS="$STACKSH_PARAMS MYSQL_HOST=$HEAD_MGT_IP RABBIT_HOST=$HEAD_MGT_IP GLANCE_HOSTPORT=$HEAD_MGT_IP:9292 FLOATING_RANGE=$FLOATING_RANGE"

-

-# Helper to launch containers

-function build_xva {

-    GUEST_NAME=$1 PUB_IP=$2 MGT_IP=$3 DO_SHUTDOWN=$4 TERMINATE=$TERMINATE STACKSH_PARAMS="$COMMON_VARS $5" ./build_xva.sh

-}

-

-# Launch the head node - headnode uses a non-ip domain name,

-# because rabbit won't launch with an ip addr hostname :(

-build_xva HEADNODE $HEAD_PUB_IP $HEAD_MGT_IP 1 "ENABLED_SERVICES=g-api,g-reg,key,n-api,n-sch,n-vnc,horizon,mysql,rabbit"

-

-# Build the HA compute host

-build_xva COMPUTENODE $COMPUTE_PUB_IP $COMPUTE_MGT_IP 0 "ENABLED_SERVICES=n-cpu,n-net,n-api"

deleted file mode 100644

@@ -1,5 +0,0 @@

-LABEL=vpxroot           /                       ext3    defaults        1 1

-tmpfs                   /dev/shm                tmpfs   defaults        0 0

-devpts                  /dev/pts                devpts  gid=5,mode=620  0 0

-sysfs                   /sys                    sysfs   defaults        0 0

-proc                    /proc                   proc    defaults        0 0

deleted file mode 100644

@@ -1,10 +0,0 @@

-# hvc0 - getty

-#

-# This service maintains a getty on hvc0 from the point the system is

-# started until it is shut down again.

-

-start on stopped rc RUNLEVEL=[2345]

-stop on runlevel [!2345]

-

-respawn

-exec /sbin/getty -8 9600 hvc0

deleted file mode 100755

@@ -1,365 +0,0 @@

-#!/bin/bash

-#

-# Copyright (c) 2011 Citrix Systems, Inc.

-# Copyright 2011 OpenStack Foundation

-# All Rights Reserved.

-#

-#    Licensed under the Apache License, Version 2.0 (the "License"); you may

-#    not use this file except in compliance with the License. You may obtain

-#    a copy of the License at

-#

-#         http://www.apache.org/licenses/LICENSE-2.0

-#

-#    Unless required by applicable law or agreed to in writing, software

-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT

-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the

-#    License for the specific language governing permissions and limitations

-#    under the License.

-#

-

-set -eu

-

-set -o xtrace

-

-VBOX_IMG=/output/packages/vbox-img

-

-usage() {

-    cat >&2 <<EOF

-$0 -o <output filenames> -t <types> -x <xml files> <fs-staging-dir> <fs-size-MiB> <tmpdir>

-  -o: Colon-separated list of output filenames (one for each type).

-  -p: Create a disk label and partition within the output image

-  -t: Colon-separated list of types of output file.  xva and ovf supported.

-  -x: XML filenames (one for each type)

-

-EOF

-    exit 1

-}

-

-# parse cmdline

-

-OPT_USE_PARTITION=

-OPT_TYPES=

-OPT_OUTPUT_FILES=

-OPT_XML_FILES=

-

-while getopts o:pt:x: o

-do case "$o" in

-    o)    OPT_OUTPUT_FILES=$(echo "$OPTARG" | sed -e 's/\s*:\s*/ /g')

-        ;;

-    p)    OPT_USE_PARTITION=1

-        ;;

-    t)    OPT_TYPES=$(echo "$OPTARG" | sed -e 's/\s*:\s*/ /g')

-        ;;

-    x)    OPT_XML_FILES=$(echo "$OPTARG" | sed -e 's/\s*:\s*/ /g')

-        ;;

-    [?])  usage

-        ;;

-    esac

-done

-shift $((OPTIND-1))

-

-[ $# -ne 3 ] && usage

-FS_STAGING="$1"

-FS_SIZE_MIB="$2"

-TMPDIR="$3"

-

-if [ "$UID" = "0" ]

-then

-  SUDO=

-else

-  SUDO=sudo

-fi

-

-if [ "$FS_SIZE_MIB" = "0" ]

-then

-    # Just create a dummy file.  This allows developers to bypass bits of

-    # the build by setting the size to 0.

-    touch $OPT_OUTPUT_FILES

-    exit 0

-fi

-

-# create temporary files and dirs

-FS_TMPFILE=$(mktemp "$TMPDIR/mkxva-fsimg-XXXXX")

-XVA_TARBALL_STAGING=$(mktemp -d "$TMPDIR/mkxva-tarball-staging-XXXXX")

-OVF_STAGING=$(mktemp -d "$TMPDIR/mkxva-ovf-staging-XXXXX")

-

-# Find udevsettle and udevtrigger on this installation

-if [ -x "/sbin/udevsettle" ] ; then

-    UDEVSETTLE="/sbin/udevsettle --timeout=30"

-elif [ -x "/sbin/udevadm" ] ; then

-    UDEVSETTLE='/sbin/udevadm settle'

-else

-    UDEVSETTLE='/bin/true'

-fi

-

-if [ -x "/sbin/udevtrigger" ] ; then

-    UDEVTRIGGER=/sbin/udevtrigger

-elif [ -x "/sbin/udevadm" ] ; then

-    UDEVTRIGGER='/sbin/udevadm trigger'

-else

-    UDEVTRIGGER=

-fi

-

-# CLEAN_ variables track devices and mounts that must be taken down

-# no matter how the script exits.  Loop devices are vulnerable to

-# exhaustion so we make every effort to remove them

-

-CLEAN_KPARTX=

-CLEAN_LOSETUP=

-CLEAN_MOUNTPOINT=

-

-cleanup_devices () {

-    if [ -n "$CLEAN_MOUNTPOINT" ] ; then

-        echo "Mountpoint $CLEAN_MOUNTPOINT removed on abnormal exit"

-        $SUDO umount "$CLEAN_MOUNTPOINT" || echo "umount failed"

-        rmdir "$CLEAN_MOUNTPOINT" || echo "rmdir failed"

-    fi

-    if [ -n "$CLEAN_KPARTX" ] ; then

-        echo "kpartx devices for $CLEAN_KPARTX removed on abnormal exit"

-        $SUDO kpartx -d "$CLEAN_KPARTX" || echo "kpartx -d failed"

-    fi

-    if [ -n "$CLEAN_LOSETUP" ] ; then

-        echo "Loop device $CLEAN_LOSETUP removed on abnormal exit"

-        $SUDO losetup -d "$CLEAN_LOSETUP" # Allow losetup errors to propagate

-    fi

-}

-

-trap "cleanup_devices" EXIT

-

-make_fs_inner () {

-    local staging="$1"

-    local output="$2"

-    local options="$3"

-    CLEAN_MOUNTPOINT=$(mktemp -d "$TMPDIR/mkfs-XXXXXX")

-

-    # copy staging dir contents to fs image

-    $SUDO mount $options "$output" "$CLEAN_MOUNTPOINT"

-    $SUDO tar -C "$staging" -c . | tar -C "$CLEAN_MOUNTPOINT" -x

-    $SUDO umount "$CLEAN_MOUNTPOINT"

-    rmdir "$CLEAN_MOUNTPOINT"

-    CLEAN_MOUNTPOINT=

-}

-

-# Turn a staging dir into an ext3 filesystem within a partition

-make_fs_in_partition () {

-    local staging="$1"

-    local output="$2"

-

-    # create new empty disk

-    dd if=/dev/zero of="$output" bs=1M count=$FS_SIZE_MIB

-    # Set up a loop device on the empty disk image

-    local loopdevice=$($SUDO losetup -f)

-    $SUDO losetup "$loopdevice" "$output"

-    CLEAN_LOSETUP="$loopdevice"

-    # Create a partition table and single partition.

-    # Start partition at sector 63 to allow space for grub

-    cat <<EOF

-Errors from sfdisk below are expected because the new disk is uninitialised

-  Expecting: sfdisk: ERROR: sector 0 does not have an msdos signature

-  Expecting: /dev/loop0: unrecognized partition table type

-EOF

-    $SUDO sfdisk -uS "$CLEAN_LOSETUP" <<EOF

-63 - - *

-EOF

-

-    # kpartx creates a device for the new partition

-    # in the form /dev/mapper/loop1p1

-    $SUDO kpartx -av "$CLEAN_LOSETUP"

-    CLEAN_KPARTX="$CLEAN_LOSETUP"

-    # Wait for the device to appear

-    $UDEVTRIGGER

-    $UDEVSETTLE  || echo "udev settle command return code non-zero"

-    # Infer the name of the partition device

-    local partition="${CLEAN_LOSETUP/dev/dev/mapper}p1"

-    # Set permissive privileges on the device

-    $SUDO chmod 0777 "$partition"

-    # Make an ext3 filesystem on the partition

-    /sbin/mkfs.ext3 -I 128 -m0 -F "$partition"

-    /sbin/e2label "$partition" vpxroot

-    make_fs_inner "$staging" "$partition" ""

-

-    # Now run grub on the image we've created

-    CLEAN_MOUNTPOINT=$(mktemp -d "$TMPDIR/mkfs-XXXXXX")

-

-    # copy Set up[ grub files prior to installing grub within the image

-    $SUDO mount "$partition" "$CLEAN_MOUNTPOINT"

-    $SUDO cp $CLEAN_MOUNTPOINT/usr/share/grub/i386-redhat/* "$CLEAN_MOUNTPOINT/boot/grub"

-    kernel_version=$($SUDO chroot "$CLEAN_MOUNTPOINT" rpm -qv kernel | sed -e 's/kernel-//')

-    kernel_version_xen=$($SUDO chroot "$CLEAN_MOUNTPOINT" rpm -qv kernel-xen | sed -e 's/kernel-xen-//')

-    $SUDO cat > "$CLEAN_MOUNTPOINT/boot/grub/grub.conf" <<EOF

-default 0

-timeout 2

-

-title vmlinuz-$kernel_version (HVM)

-        root (hd0,0)

-        kernel /boot/vmlinuz-$kernel_version ro root=LABEL=vpxroot

-        initrd /boot/initrd-$kernel_version.img

-

-title vmlinuz-${kernel_version_xen}xen (PV)

-        root (hd0,0)

-        kernel /boot/vmlinuz-${kernel_version_xen}xen ro root=LABEL=vpxroot console=xvc0

-        initrd /boot/initrd-${kernel_version_xen}xen.img

-EOF

-

-    $SUDO umount "$CLEAN_MOUNTPOINT"

-    CLEAN_MOUNTPOINT=

-

-    # Grub expects a disk with name /dev/xxxx with a first partition

-    # named /dev/xxxx1, so we give it what it wants using symlinks

-    # Note: /dev is linked to the real /dev of the build machine, so

-    # must be cleaned up

-    local disk_name="/dev/osxva$$bld"

-    local disk_part1_name="${disk_name}1"

-    rm -f "$disk_name"

-    rm -f "$disk_part1_name"

-    ln -s "$CLEAN_LOSETUP" "$disk_name"

-    ln -s "$partition" "$disk_part1_name"

-

-    # Feed commands into the grub shell to setup the disk

-    grub --no-curses --device-map=/dev/null <<EOF

-device (hd0) $disk_name

-setup (hd0) (hd0,0)

-quit

-EOF

-

-    # Cleanup

-    rm -f "$disk_name"

-    rm -f "$disk_part1_name"

-    $SUDO kpartx -dv "$CLEAN_KPARTX"

-    CLEAN_KPARTX=

-    $SUDO losetup -d "$CLEAN_LOSETUP"

-    CLEAN_LOSETUP=

-}

-

-# turn a staging dir into an ext3 filesystem image

-make_fs () {

-    local staging="$1"

-    local output="$2"

-

-    # create new empty fs

-    dd if=/dev/zero of="$output" bs=1M count=0 seek=$FS_SIZE_MIB

-    /sbin/mkfs.ext3 -m0 -F "$output"

-    /sbin/e2label "$output" vpxroot

-    make_fs_inner "$staging" "$output" "-oloop"

-}

-

-

-# split a virtual disk image into the format expected inside an xva file

-splitvdi () {

-    local diskimg="$1"

-    local outputdir="$2"

-    local rio="$3"

-

-    local n_bytes=$(stat --printf=%s "$diskimg")

-    local n_meg=$((($n_bytes+$((1024*1024 -1)))/$((1024*1024))))

-    local i=0

-    while [ $i -lt $n_meg ] ; do

-	if [ $rio -eq 0 ] ; then

-		local file="$outputdir"/chunk-$(printf "%08d" $i)

-		dd if="$diskimg" of="$file" skip=$i bs=1M count=1 2>/dev/null

-		gzip "$file"

-	else

-		local file="$outputdir"/$(printf "%08d" $i)

-	        dd if="$diskimg" of="$file" skip=$i bs=1M count=1 2>/dev/null

-		local chksum=$(sha1sum -b "$file")

-		echo -n "${chksum/ */}" > "$file.checksum"

-	fi

-	i=$(($i + 1))

-    done

-}

-

-if [ -n "$OPT_USE_PARTITION" ] ; then

-    make_fs_in_partition "$FS_STAGING" "$FS_TMPFILE"

-else

-    make_fs "$FS_STAGING" "$FS_TMPFILE"

-fi

-

-VDI_SIZE=$(stat --format=%s "$FS_TMPFILE")

-

-make_xva () {

-    local output_file="$1"

-    local xml_file="$2"

-    local subdir

-    local rio

-

-    if [[ `cat $xml_file` =~ "<member>\s*<name>class</name>\s*<value>VDI</value>\s*</member>\s*<member>\s*<name>id</name>\s*<value>(Ref:[0-9]+)</value>" ]]

-    then

-        # it's a rio style xva

-        subdir="${BASH_REMATCH[1]}";

-        rio=1

-    else

-        # it's a geneva style xva

-        subdir="xvda"

-        rio=0

-    fi

-

-    cp "$xml_file" "$XVA_TARBALL_STAGING"/ova.xml

-    sed -i -e "s/@VDI_SIZE@/$VDI_SIZE/" "$XVA_TARBALL_STAGING"/ova.xml

-    mkdir "$XVA_TARBALL_STAGING/$subdir"

-    splitvdi "$FS_TMPFILE" "$XVA_TARBALL_STAGING/$subdir" "$rio"

-    TARFILE_MEMBERS=$(cd "$XVA_TARBALL_STAGING" && echo ova.xml $subdir/*)

-    tar -C "$XVA_TARBALL_STAGING" --format=v7 -c $TARFILE_MEMBERS -f "$output_file.tmp"

-    mv "$output_file.tmp" "$output_file"

-}

-

-make_ovf () {

-    local output_dir="$1"

-    local xml_file="$2"

-    local output_base=$(basename "$output_dir")

-    local disk="$output_dir/${output_base}.vmdk"

-    local manifest="$output_dir/${output_base}.mf"

-    local ovf="$output_dir/${output_base}.ovf"

-

-    mkdir -p "$output_dir"

-    rm -f "$disk"

-    $VBOX_IMG convert --srcfilename="$FS_TMPFILE" --dstfilename="$disk" \

-        --srcformat RAW --dstformat VMDK --variant Stream

-    chmod 0644 "$disk"

-

-    local n_bytes=$(stat --printf=%s "$disk")

-    cp "$xml_file" "$ovf"

-    sed -i -e "s/@MKXVA_DISK_FULLSIZE@/$VDI_SIZE/" "$ovf"

-    sed -i -e "s/@MKXVA_DISK_SIZE@/$n_bytes/" "$ovf"

-    sed -i -e "s/@MKXVA_DISK_MIB_SIZE@/$FS_SIZE_MIB/" "$ovf"

-    sed -i -e "s/@MKXVA_DISK_FILENAME@/${output_base}.vmdk/" "$ovf"

-

-    for to_sign in "$ovf" "$disk"

-    do

-	local sha1_sum=$(sha1sum "$to_sign" | cut -d' ' -f1)

-	echo "SHA1($(basename "$to_sign"))= $sha1_sum" >> $manifest

-    done

-}

-

-output_files="$OPT_OUTPUT_FILES"

-xml_files="$OPT_XML_FILES"

-# Iterate through the type list creating the relevant VMs

-for create_type in $OPT_TYPES

-do

-    # Shift one parameter from the front of the lists

-    create_output_file="${output_files%% *}"

-    output_files="${output_files#* }"

-    create_xml_file="${xml_files%% *}"

-    xml_files="${xml_files#* }"

-    echo "Creating $create_type appliance $create_output_file using metadata file $create_xml_file"

-

-    case "$create_type" in

-	xva)

-	    make_xva "$create_output_file" "$create_xml_file"

-	    ;;

-	ovf)

-	    make_ovf "$create_output_file" "$create_xml_file"

-	    ;;

-	*)

-	    echo "Unknown VM type '$create_type'"

-	    exit 1

-	    ;;

-    esac

-

-done

-

-

-# cleanup

-if [ -z "${DO_NOT_CLEANUP:-}" ] ; then

-    rm -rf "$XVA_TARBALL_STAGING"

-    rm -f "$FS_TMPFILE"

-fi

deleted file mode 100755

@@ -1,9 +0,0 @@

-#!/bin/bash

-

-#Usage: ./templatedelete.sh <template-uuid>

-

-templateuuid="$1"

-

-xe template-param-set other-config:default_template=false uuid="$templateuuid"

-xe template-param-set is-a-template=false uuid="$templateuuid"

-xe vm-destroy uuid="$templateuuid"

deleted file mode 100644

@@ -1,8 +0,0 @@

-127.0.0.1   localhost

-127.0.0.1   %HOSTNAME%

-::1     localhost ip6-localhost ip6-loopback

-fe00::0     ip6-localnet

-ff00::0     ip6-mcastprefix

-ff02::1     ip6-allnodes

-ff02::2     ip6-allrouters

-

deleted file mode 100644

@@ -1,6 +0,0 @@

-default 0

-

-title default

-        root (hd0,0)

-        kernel /boot/vmlinuz-@KERNEL_VERSION@ ro root=LABEL=vpxroot console=xvc0

-        initrd /boot/initrd.img-@KERNEL_VERSION@

deleted file mode 100644

@@ -1,14 +0,0 @@

-<?xml version="1.0" ?>

-<appliance version="0.1">

-        <vm name="vm">

-                <label>

-                        @PRODUCT_BRAND@ @PRODUCT_VERSION@-@BUILD_NUMBER@

-                </label>

-                <shortdesc></shortdesc>

-                <config mem_set="1073741824" vcpus="1"/>

-                <hacks is_hvm="false"/>

-                <vbd device="xvda" function="root" mode="w" vdi="vdi_xvda"/>

-        </vm>

-        <vdi name="vdi_xvda" size="@VDI_SIZE@" source="file://xvda" type="dir-gzipped-chunks" variety="system"/>

-</appliance>

-