@@ -119,7 +119,7 @@ nova flavor-list

 INSTANCE_TYPE=$(nova flavor-list | grep $DEFAULT_INSTANCE_TYPE | get_field 1)

 if [[ -z "$INSTANCE_TYPE" ]]; then

     # grab the first flavor in the list to launch if default doesn't exist

-   INSTANCE_TYPE=$(nova flavor-list | head -n 4 | tail -n 1 | get_field 1)

+    INSTANCE_TYPE=$(nova flavor-list | head -n 4 | tail -n 1 | get_field 1)

 fi

 # Clean-up from previous runs

@@ -62,7 +62,7 @@ die_if_not_set $LINENO IMAGE "Failure getting image $DOCKER_IMAGE_NAME"

 INSTANCE_TYPE=$(nova flavor-list | grep $DEFAULT_INSTANCE_TYPE | get_field 1)

 if [[ -z "$INSTANCE_TYPE" ]]; then

     # grab the first flavor in the list to launch if default doesn't exist

-   INSTANCE_TYPE=$(nova flavor-list | head -n 4 | tail -n 1 | get_field 1)

+    INSTANCE_TYPE=$(nova flavor-list | head -n 4 | tail -n 1 | get_field 1)

 fi

 # Clean-up from previous runs

@@ -102,4 +102,3 @@ set +o xtrace

 echo "*********************************************************************"

 echo "SUCCESS: End DevStack Exercise: $0"

 echo "*********************************************************************"

-

@@ -87,31 +87,31 @@ fi

 # Volumes

 # -------

 if is_service_enabled c-vol && ! is_service_enabled n-cell; then

-   VOLUME_ZONE=`euca-describe-availability-zones | head -n1 | cut -f2`

-   die_if_not_set $LINENO VOLUME_ZONE "Failure to find zone for volume"

-

-   VOLUME=`euca-create-volume -s 1 -z $VOLUME_ZONE | cut -f2`

-   die_if_not_set $LINENO VOLUME "Failure to create volume"

-

-   # Test that volume has been created

-   VOLUME=`euca-describe-volumes $VOLUME | cut -f2`

-   die_if_not_set $LINENO VOLUME "Failure to get volume"

-

-   # Test volume has become available

-   if ! timeout $RUNNING_TIMEOUT sh -c "while ! euca-describe-volumes $VOLUME | grep -q available; do sleep 1; done"; then

-       die $LINENO "volume didn't become available within $RUNNING_TIMEOUT seconds"

-   fi

-

-   # Attach volume to an instance

-   euca-attach-volume -i $INSTANCE -d $ATTACH_DEVICE $VOLUME || \

-       die $LINENO "Failure attaching volume $VOLUME to $INSTANCE"

-   if ! timeout $ACTIVE_TIMEOUT sh -c "while ! euca-describe-volumes $VOLUME | grep -A 1 in-use | grep -q attach; do sleep 1; done"; then

-       die $LINENO "Could not attach $VOLUME to $INSTANCE"

-   fi

-

-   # Detach volume from an instance

-   euca-detach-volume $VOLUME || \

-       die $LINENO "Failure detaching volume $VOLUME to $INSTANCE"

+    VOLUME_ZONE=`euca-describe-availability-zones | head -n1 | cut -f2`

+    die_if_not_set $LINENO VOLUME_ZONE "Failure to find zone for volume"

+

+    VOLUME=`euca-create-volume -s 1 -z $VOLUME_ZONE | cut -f2`

+    die_if_not_set $LINENO VOLUME "Failure to create volume"

+

+    # Test that volume has been created

+    VOLUME=`euca-describe-volumes $VOLUME | cut -f2`

+    die_if_not_set $LINENO VOLUME "Failure to get volume"

+

+    # Test volume has become available

+    if ! timeout $RUNNING_TIMEOUT sh -c "while ! euca-describe-volumes $VOLUME | grep -q available; do sleep 1; done"; then

+        die $LINENO "volume didn't become available within $RUNNING_TIMEOUT seconds"

+    fi

+

+    # Attach volume to an instance

+    euca-attach-volume -i $INSTANCE -d $ATTACH_DEVICE $VOLUME || \

+        die $LINENO "Failure attaching volume $VOLUME to $INSTANCE"

+    if ! timeout $ACTIVE_TIMEOUT sh -c "while ! euca-describe-volumes $VOLUME | grep -A 1 in-use | grep -q attach; do sleep 1; done"; then

+        die $LINENO "Could not attach $VOLUME to $INSTANCE"

+    fi

+

+    # Detach volume from an instance

+    euca-detach-volume $VOLUME || \

+        die $LINENO "Failure detaching volume $VOLUME to $INSTANCE"

     if ! timeout $ACTIVE_TIMEOUT sh -c "while ! euca-describe-volumes $VOLUME | grep -q available; do sleep 1; done"; then

         die $LINENO "Could not detach $VOLUME to $INSTANCE"

     fi

@@ -120,7 +120,7 @@ if is_service_enabled c-vol && ! is_service_enabled n-cell; then

     euca-delete-volume $VOLUME || \

         die $LINENO "Failure to delete volume"

     if ! timeout $ACTIVE_TIMEOUT sh -c "while euca-describe-volumes | grep $VOLUME; do sleep 1; done"; then

-       die $LINENO "Could not delete $VOLUME"

+        die $LINENO "Could not delete $VOLUME"

     fi

 else

     echo "Volume Tests Skipped"

@@ -113,7 +113,7 @@ nova flavor-list

 INSTANCE_TYPE=$(nova flavor-list | grep $DEFAULT_INSTANCE_TYPE | get_field 1)

 if [[ -z "$INSTANCE_TYPE" ]]; then

     # grab the first flavor in the list to launch if default doesn't exist

-   INSTANCE_TYPE=$(nova flavor-list | head -n 4 | tail -n 1 | get_field 1)

+    INSTANCE_TYPE=$(nova flavor-list | head -n 4 | tail -n 1 | get_field 1)

 fi

 # Clean-up from previous runs

@@ -168,7 +168,7 @@ if ! is_service_enabled neutron; then

     # list floating addresses

     if ! timeout $ASSOCIATE_TIMEOUT sh -c "while ! nova floating-ip-list | grep $TEST_FLOATING_POOL | grep -q $TEST_FLOATING_IP; do sleep 1; done"; then

         die $LINENO "Floating IP not allocated"

-     fi

+    fi

 fi

 # Dis-allow icmp traffic (ping)

@@ -272,12 +272,12 @@ function create_vms {

 }

 function ping_ip {

-     # Test agent connection.  Assumes namespaces are disabled, and

-     # that DHCP is in use, but not L3

-     local VM_NAME=$1

-     local NET_NAME=$2

-     IP=$(get_instance_ip $VM_NAME $NET_NAME)

-     ping_check $NET_NAME $IP $BOOT_TIMEOUT

+    # Test agent connection.  Assumes namespaces are disabled, and

+    # that DHCP is in use, but not L3

+    local VM_NAME=$1

+    local NET_NAME=$2

+    IP=$(get_instance_ip $VM_NAME $NET_NAME)

+    ping_check $NET_NAME $IP $BOOT_TIMEOUT

 }

 function check_vm {

@@ -329,12 +329,12 @@ function delete_network {

 }

 function delete_networks {

-   foreach_tenant_net 'delete_network ${%TENANT%_NAME} %NUM%'

-   #TODO(nati) add secuirty group check after it is implemented

-   # source $TOP_DIR/openrc demo1 demo1

-   # nova secgroup-delete-rule default icmp -1 -1 0.0.0.0/0

-   # source $TOP_DIR/openrc demo2 demo2

-   # nova secgroup-delete-rule default icmp -1 -1 0.0.0.0/0

+    foreach_tenant_net 'delete_network ${%TENANT%_NAME} %NUM%'

+    # TODO(nati) add secuirty group check after it is implemented

+    # source $TOP_DIR/openrc demo1 demo1

+    # nova secgroup-delete-rule default icmp -1 -1 0.0.0.0/0

+    # source $TOP_DIR/openrc demo2 demo2

+    # nova secgroup-delete-rule default icmp -1 -1 0.0.0.0/0

 }

 function create_all {

@@ -117,7 +117,7 @@ nova flavor-list

 INSTANCE_TYPE=$(nova flavor-list | grep $DEFAULT_INSTANCE_TYPE | get_field 1)

 if [[ -z "$INSTANCE_TYPE" ]]; then

     # grab the first flavor in the list to launch if default doesn't exist

-   INSTANCE_TYPE=$(nova flavor-list | head -n 4 | tail -n 1 | get_field 1)

+    INSTANCE_TYPE=$(nova flavor-list | head -n 4 | tail -n 1 | get_field 1)

 fi

 # Clean-up from previous runs

@@ -66,12 +66,12 @@ fi

 # Heat

 if [[ "$ENABLED_SERVICES" =~ "heat" ]]; then

     HEAT_USER=$(get_id keystone user-create --name=heat \

-                                              --pass="$SERVICE_PASSWORD" \

-                                              --tenant_id $SERVICE_TENANT \

-                                              --email=heat@example.com)

+        --pass="$SERVICE_PASSWORD" \

+        --tenant_id $SERVICE_TENANT \

+        --email=heat@example.com)

     keystone user-role-add --tenant-id $SERVICE_TENANT \

-                           --user-id $HEAT_USER \

-                           --role-id $SERVICE_ROLE

+        --user-id $HEAT_USER \

+        --role-id $SERVICE_ROLE

     # heat_stack_user role is for users created by Heat

     keystone role-create --name heat_stack_user

     if [[ "$KEYSTONE_CATALOG_BACKEND" = 'sql' ]]; then

@@ -126,16 +126,16 @@ fi

 # Ceilometer

 if [[ "$ENABLED_SERVICES" =~ "ceilometer" ]]; then

     CEILOMETER_USER=$(get_id keystone user-create --name=ceilometer \

-                                              --pass="$SERVICE_PASSWORD" \

-                                              --tenant_id $SERVICE_TENANT \

-                                              --email=ceilometer@example.com)

+        --pass="$SERVICE_PASSWORD" \

+        --tenant_id $SERVICE_TENANT \

+        --email=ceilometer@example.com)

     keystone user-role-add --tenant-id $SERVICE_TENANT \

-                           --user-id $CEILOMETER_USER \

-                           --role-id $ADMIN_ROLE

+        --user-id $CEILOMETER_USER \

+        --role-id $ADMIN_ROLE

     # Ceilometer needs ResellerAdmin role to access swift account stats.

     keystone user-role-add --tenant-id $SERVICE_TENANT \

-                           --user-id $CEILOMETER_USER \

-                           --role-id $RESELLER_ROLE

+        --user-id $CEILOMETER_USER \

+        --role-id $RESELLER_ROLE

     if [[ "$KEYSTONE_CATALOG_BACKEND" = 'sql' ]]; then

         CEILOMETER_SERVICE=$(get_id keystone service-create \

             --name=ceilometer \

@@ -122,16 +122,16 @@ fi

 # test empty option

 if ini_has_option test.ini ddd empty; then

-   echo "OK: ddd.empty present"

+    echo "OK: ddd.empty present"

 else

-   echo "ini_has_option failed: ddd.empty not found"

+    echo "ini_has_option failed: ddd.empty not found"

 fi

 # test non-empty option

 if ini_has_option test.ini bbb handlers; then

-   echo "OK: bbb.handlers present"

+    echo "OK: bbb.handlers present"

 else

-   echo "ini_has_option failed: bbb.handlers not found"

+    echo "ini_has_option failed: bbb.handlers not found"

 fi

 # test changing empty option