#!/bin/bash # # XenServer specific defaults for the /tools/xen/ scripts # Similar to stackrc, you can override these in your localrc # # Name of this guest GUEST_NAME=${GUEST_NAME:-DevStackOSDomU} # Size of image VDI_MB=${VDI_MB:-5000} OSDOMU_MEM_MB=1024 # VM Password GUEST_PASSWORD=${GUEST_PASSWORD:-secrete} # Host Interface, i.e. the interface on the nova vm you want to expose the # services on. Usually eth2 (management network) or eth3 (public network) and # not eth0 (private network with XenServer host) or eth1 (VM traffic network) # This is also used as the interface for the Ubuntu install HOST_IP_IFACE=${HOST_IP_IFACE:-eth3} # # Our nova host's network info # # A host-only ip that let's the interface come up, otherwise unused VM_IP=${VM_IP:-10.255.255.255} MGT_IP=${MGT_IP:-172.16.100.55} PUB_IP=${PUB_IP:-192.168.1.55} # Public network PUB_BR=${PUB_BR:-"xenbr0"} PUB_DEV=${PUB_DEV:-eth0} PUB_VLAN=${PUB_VLAN:--1} PUB_NETMASK=${PUB_NETMASK:-255.255.255.0} # VM network params VM_NETMASK=${VM_NETMASK:-255.255.255.0} VM_BR=${VM_BR:-""} VM_VLAN=${VM_VLAN:-100} VM_DEV=${VM_DEV:-eth0} # MGMT network params MGT_NETMASK=${MGT_NETMASK:-255.255.255.0} MGT_BR=${MGT_BR:-""} MGT_VLAN=${MGT_VLAN:-101} MGT_DEV=${MGT_DEV:-eth0} # Decide if you should enable eth0, # the guest installer network # You need to disable this on xcp-xapi on Ubuntu 12.04 ENABLE_GI=true # Ubuntu install settings UBUNTU_INST_RELEASE="oneiric" UBUNTU_INST_TEMPLATE_NAME="Ubuntu 11.10 (64-bit) for DevStack" # For 12.04 use "precise" and update template name # However, for 12.04, you should be using # XenServer 6.1 and later or XCP 1.6 or later # 11.10 is only really supported with XenServer 6.0.2 and later UBUNTU_INST_ARCH="amd64" UBUNTU_INST_REPOSITORY="http://archive.ubuntu.net/ubuntu" UBUNTU_INST_LOCALE="en_US" UBUNTU_INST_KEYBOARD="us" # network configuration for HOST_IP_IFACE during install UBUNTU_INST_IP="dhcp" UBUNTU_INST_NAMESERVERS="" UBUNTU_INST_NETMASK="" UBUNTU_INST_GATEWAY="" # Load stackrc defaults # then override with settings from localrc cd ../.. && source ./stackrc && cd $TOP_DIR