# WARNING WARNING WARNING - DO NOT EDIT THIS FILE IN JENKINS DIRECTLY.
# SUBMIT A PR TO https://github.com/jhowardmsft/docker-w2wCIScripts/blob/master/runCI/executeCI.ps1,
# AND MAKE SURE https://github.com/jhowardmsft/docker-w2wCIScripts/blob/master/runCI/Invoke-DockerCI.ps1
# ISN'T BROKEN!!!!!!! VALIDATE USING A TEST CONTEXT IN JENKINS. THEN COPY/PASTE INTO JENKINS PRODUCTION.
#
# Jenkins CI scripts for Windows to Windows CI (Powershell Version)
# By John Howard (@jhowardmsft) January 2016 - bash version; July 2016 Ported to PowerShell
$ErrorActionPreference = 'Stop'
$StartTime=Get-Date
# Put up top to be blindingly obvious. The production jenkins.dockerproject.org Linux-container
# CI job is "Docker-PRs-LoW-RS3". Force into LCOW mode for this run, or not.
if ($env:BUILD_TAG -match "-LoW") { $env:LCOW_MODE=1 }
if ($env:BUILD_TAG -match "-WoW") { $env:LCOW_MODE="" }
# -------------------------------------------------------------------------------------------
# When executed, we rely on four variables being set in the environment:
#
# [The reason for being environment variables rather than parameters is historical. No reason
# why it couldn't be updated.]
#
# SOURCES_DRIVE is the drive on which the sources being tested are cloned from.
# This should be a straight drive letter, no platform semantics.
# For example 'c'
#
# SOURCES_SUBDIR is the top level directory under SOURCES_DRIVE where the
# sources are cloned to. There are no platform semantics in this
# as it does not include slashes.
# For example 'gopath'
#
# Based on the above examples, it would be expected that Jenkins
# would clone the sources being tested to
# SOURCES_DRIVE\SOURCES_SUBDIR\src\github.com\docker\docker, or
# c:\gopath\src\github.com\docker\docker
#
# TESTRUN_DRIVE is the drive where we build the binary on and redirect everything
# to for the daemon under test. On an Azure D2 type host which has
# an SSD temporary storage D: drive, this is ideal for performance.
# For example 'd'
#
# TESTRUN_SUBDIR is the top level directory under TESTRUN_DRIVE where we redirect
# everything to for the daemon under test. For example 'CI'.
# Hence, the daemon under test is run under
# TESTRUN_DRIVE\TESTRUN_SUBDIR\CI-<CommitID> or
# d:\CI\CI-<CommitID>
#
# In addition, the following variables can control the run configuration:
#
# DOCKER_DUT_DEBUG if defined starts the daemon under test in debug mode.
#
# SKIP_VALIDATION_TESTS if defined skips the validation tests
#
# SKIP_UNIT_TESTS if defined skips the unit tests
#
# SKIP_INTEGRATION_TESTS if defined skips the integration tests
#
# SKIP_COPY_GO if defined skips copy the go installer from the image
#
# DOCKER_DUT_HYPERV if default daemon under test default isolation is hyperv
#
# INTEGRATION_TEST_NAME to only run partial tests eg "TestInfo*" will only run
# any tests starting "TestInfo"
#
# SKIP_BINARY_BUILD if defined skips building the binary
#
# SKIP_ZAP_DUT if defined doesn't zap the daemon under test directory
#
# SKIP_IMAGE_BUILD if defined doesn't build the 'docker' image
#
# INTEGRATION_IN_CONTAINER if defined, runs the integration tests from inside a container.
# As of July 2016, there are known issues with this.
#
# SKIP_ALL_CLEANUP if defined, skips any cleanup at the start or end of the run
#
# WINDOWS_BASE_IMAGE if defined, uses that as the base image. Note that the
# docker integration tests are also coded to use the same
# environment variable, and if no set, defaults to microsoft/windowsservercore
#
# LCOW_BASIC_MODE if defined, does very basic LCOW verification. Ultimately we
# want to run the entire CI suite from docker, but that's a way off.
#
# LCOW_MODE if defined, runs the entire CI suite
#
# -------------------------------------------------------------------------------------------
#
# Jenkins Integration. Add a Windows Powershell build step as follows:
#
# Write-Host -ForegroundColor green "INFO: Jenkins build step starting"
# $CISCRIPT_DEFAULT_LOCATION = "https://raw.githubusercontent.com/jhowardmsft/docker-w2wCIScripts/master/runCI/executeCI.ps1"
# $CISCRIPT_LOCAL_LOCATION = "$env:TEMP\executeCI.ps1"
# Write-Host -ForegroundColor green "INFO: Removing cached execution script"
# Remove-Item $CISCRIPT_LOCAL_LOCATION -Force -ErrorAction SilentlyContinue 2>&1 | Out-Null
# $wc = New-Object net.webclient
# try {
# Write-Host -ForegroundColor green "INFO: Downloading latest execution script..."
# $wc.Downloadfile($CISCRIPT_DEFAULT_LOCATION, $CISCRIPT_LOCAL_LOCATION)
# }
# catch [System.Net.WebException]
# {
# Throw ("Failed to download: $_")
# }
# & $CISCRIPT_LOCAL_LOCATION
# -------------------------------------------------------------------------------------------
$SCRIPT_VER="05-Feb-2019 09:03 PDT"
$FinallyColour="Cyan"
#$env:DOCKER_DUT_DEBUG="yes" # Comment out to not be in debug mode
#$env:SKIP_UNIT_TESTS="yes"
#$env:SKIP_VALIDATION_TESTS="yes"
#$env:SKIP_ZAP_DUT=""
#$env:SKIP_BINARY_BUILD="yes"
#$env:INTEGRATION_TEST_NAME=""
#$env:SKIP_IMAGE_BUILD="yes"
#$env:SKIP_ALL_CLEANUP="yes"
#$env:INTEGRATION_IN_CONTAINER="yes"
#$env:WINDOWS_BASE_IMAGE=""
#$env:SKIP_COPY_GO="yes"
#$env:INTEGRATION_TESTFLAGS="-test.v"
Function Nuke-Everything {
$ErrorActionPreference = 'SilentlyContinue'
try {
if ($null -eq $env:SKIP_ALL_CLEANUP) {
Write-Host -ForegroundColor green "INFO: Nuke-Everything..."
$containerCount = ($(docker ps -aq | Measure-Object -line).Lines)
if (-not $LastExitCode -eq 0) {
Throw "ERROR: Failed to get container count from control daemon while nuking"
}
Write-Host -ForegroundColor green "INFO: Container count on control daemon to delete is $containerCount"
if ($(docker ps -aq | Measure-Object -line).Lines -gt 0) {
docker rm -f $(docker ps -aq)
}
$allImages = $(docker images --format "{{.Repository}}#{{.ID}}")
$toRemove = ($allImages | Select-String -NotMatch "windowsservercore","nanoserver","docker")
$imageCount = ($toRemove | Measure-Object -line).Lines
if ($imageCount -gt 0) {
Write-Host -Foregroundcolor green "INFO: Non-base image count on control daemon to delete is $imageCount"
docker rmi -f ($toRemove | Foreach-Object { $_.ToString().Split("#")[1] })
}
} else {
Write-Host -ForegroundColor Magenta "WARN: Skipping cleanup of images and containers"
}
# Kill any spurious daemons. The '-' is IMPORTANT otherwise will kill the control daemon!
$pids=$(get-process | where-object {$_.ProcessName -like 'dockerd-*'}).id
foreach ($p in $pids) {
Write-Host "INFO: Killing daemon with PID $p"
Stop-Process -Id $p -Force -ErrorAction SilentlyContinue
}
if ($null -ne $pidFile) {
Write-Host "INFO: Tidying pidfile $pidfile"
if (Test-Path $pidFile) {
$p=Get-Content $pidFile -raw
if ($null -ne $p){
Write-Host -ForegroundColor green "INFO: Stopping possible daemon pid $p"
taskkill -f -t -pid $p
}
Remove-Item "$env:TEMP\docker.pid" -force -ErrorAction SilentlyContinue
}
}
Stop-Process -name "cc1" -Force -ErrorAction SilentlyContinue 2>&1 | Out-Null
Stop-Process -name "link" -Force -ErrorAction SilentlyContinue 2>&1 | Out-Null
Stop-Process -name "compile" -Force -ErrorAction SilentlyContinue 2>&1 | Out-Null
Stop-Process -name "ld" -Force -ErrorAction SilentlyContinue 2>&1 | Out-Null
Stop-Process -name "go" -Force -ErrorAction SilentlyContinue 2>&1 | Out-Null
Stop-Process -name "git" -Force -ErrorAction SilentlyContinue 2>&1 | Out-Null
Stop-Process -name "git-remote-https" -Force -ErrorAction SilentlyContinue 2>&1 | Out-Null
Stop-Process -name "integration-cli.test" -Force -ErrorAction SilentlyContinue 2>&1 | Out-Null
Stop-Process -name "tail" -Force -ErrorAction SilentlyContinue 2>&1 | Out-Null
# Detach any VHDs
gwmi msvm_mountedstorageimage -namespace root/virtualization/v2 -ErrorAction SilentlyContinue | foreach-object {$_.DetachVirtualHardDisk() }
# Stop any compute processes
Get-ComputeProcess | Stop-ComputeProcess -Force
# Delete the directory using our dangerous utility unless told not to
if (Test-Path "$env:TESTRUN_DRIVE`:\$env:TESTRUN_SUBDIR") {
if (($null -ne $env:SKIP_ZAP_DUT) -or ($null -eq $env:SKIP_ALL_CLEANUP)) {
Write-Host -ForegroundColor Green "INFO: Nuking $env:TESTRUN_DRIVE`:\$env:TESTRUN_SUBDIR"
docker-ci-zap "-folder=$env:TESTRUN_DRIVE`:\$env:TESTRUN_SUBDIR"
} else {
Write-Host -ForegroundColor Magenta "WARN: Skip nuking $env:TESTRUN_DRIVE`:\$env:TESTRUN_SUBDIR"
}
}
# TODO: This should be able to be removed in August 2017 update. Only needed for RS1 Production Server workaround - Psched
$reg = "HKLM:\System\CurrentControlSet\Services\Psched\Parameters\NdisAdapters"
$count=(Get-ChildItem $reg | Measure-Object).Count
if ($count -gt 0) {
Write-Warning "There are $count NdisAdapters leaked under Psched\Parameters"
if ($env:COMPUTERNAME -match "jenkins-rs1-") {
Write-Warning "Cleaning Psched..."
Get-ChildItem $reg | Remove-Item -Recurse -Force -ErrorAction SilentlyContinue | Out-Null
} else {
Write-Warning "Not cleaning as not a production RS1 server"
}
}
# TODO: This should be able to be removed in August 2017 update. Only needed for RS1
$reg = "HKLM:\System\CurrentControlSet\Services\WFPLWFS\Parameters\NdisAdapters"
$count=(Get-ChildItem $reg | Measure-Object).Count
if ($count -gt 0) {
Write-Warning "There are $count NdisAdapters leaked under WFPLWFS\Parameters"
if ($env:COMPUTERNAME -match "jenkins-rs1-") {
Write-Warning "Cleaning WFPLWFS..."
Get-ChildItem $reg | Remove-Item -Recurse -Force -ErrorAction SilentlyContinue | Out-Null
} else {
Write-Warning "Not cleaning as not a production RS1 server"
}
}
} catch {
# Don't throw any errors onwards Throw $_
}
}
Try {
Write-Host -ForegroundColor Cyan "`nINFO: executeCI.ps1 starting at $(date)`n"
Write-Host -ForegroundColor Green "INFO: Script version $SCRIPT_VER"
Set-PSDebug -Trace 0 # 1 to turn on
$origPath="$env:PATH" # so we can restore it at the end
$origDOCKER_HOST="$DOCKER_HOST" # So we can restore it at the end
$origGOROOT="$env:GOROOT" # So we can restore it at the end
$origGOPATH="$env:GOPATH" # So we can restore it at the end
# Turn off progress bars
$origProgressPreference=$global:ProgressPreference
$global:ProgressPreference='SilentlyContinue'
# Git version
Write-Host -ForegroundColor Green "INFO: Running $(git version)"
# OS Version
$bl=(Get-ItemProperty -Path "Registry::HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion" -Name BuildLabEx).BuildLabEx
$a=$bl.ToString().Split(".")
$Branch=$a[3]
$WindowsBuild=$a[0]+"."+$a[1]+"."+$a[4]
Write-Host -ForegroundColor green "INFO: Branch:$Branch Build:$WindowsBuild"
# List the environment variables
Write-Host -ForegroundColor green "INFO: Environment variables:"
Get-ChildItem Env: | Out-String
# PR
if (-not ($null -eq $env:PR)) { Write-Output "INFO: PR#$env:PR (https://github.com/docker/docker/pull/$env:PR)" }
# Make sure docker is installed
if ($null -eq (Get-Command "docker" -ErrorAction SilentlyContinue)) { Throw "ERROR: docker is not installed or not found on path" }
# Make sure docker-ci-zap is installed
if ($null -eq (Get-Command "docker-ci-zap" -ErrorAction SilentlyContinue)) { Throw "ERROR: docker-ci-zap is not installed or not found on path" }
# Make sure SOURCES_DRIVE is set
if ($null -eq $env:SOURCES_DRIVE) { Throw "ERROR: Environment variable SOURCES_DRIVE is not set" }
# Make sure TESTRUN_DRIVE is set
if ($null -eq $env:TESTRUN_DRIVE) { Throw "ERROR: Environment variable TESTRUN_DRIVE is not set" }
# Make sure SOURCES_SUBDIR is set
if ($null -eq $env:SOURCES_SUBDIR) { Throw "ERROR: Environment variable SOURCES_SUBDIR is not set" }
# Make sure TESTRUN_SUBDIR is set
if ($null -eq $env:TESTRUN_SUBDIR) { Throw "ERROR: Environment variable TESTRUN_SUBDIR is not set" }
# SOURCES_DRIVE\SOURCES_SUBDIR must be a directory and exist
if (-not (Test-Path -PathType Container "$env:SOURCES_DRIVE`:\$env:SOURCES_SUBDIR")) { Throw "ERROR: $env:SOURCES_DRIVE`:\$env:SOURCES_SUBDIR must be an existing directory" }
# Create the TESTRUN_DRIVE\TESTRUN_SUBDIR if it does not already exist
New-Item -ItemType Directory -Force -Path "$env:TESTRUN_DRIVE`:\$env:TESTRUN_SUBDIR" -ErrorAction SilentlyContinue | Out-Null
Write-Host -ForegroundColor Green "INFO: Sources under $env:SOURCES_DRIVE`:\$env:SOURCES_SUBDIR\..."
Write-Host -ForegroundColor Green "INFO: Test run under $env:TESTRUN_DRIVE`:\$env:TESTRUN_SUBDIR\..."
# Check the intended source location is a directory
if (-not (Test-Path -PathType Container "$env:SOURCES_DRIVE`:\$env:SOURCES_SUBDIR\src\github.com\docker\docker" -ErrorAction SilentlyContinue)) {
Throw "ERROR: $env:SOURCES_DRIVE`:\$env:SOURCES_SUBDIR\src\github.com\docker\docker is not a directory!"
}
# Make sure we start at the root of the sources
Set-Location "$env:SOURCES_DRIVE`:\$env:SOURCES_SUBDIR\src\github.com\docker\docker"
Write-Host -ForegroundColor Green "INFO: Running in $(Get-Location)"
# Make sure we are in repo
if (-not (Test-Path -PathType Leaf -Path ".\Dockerfile.windows")) {
Throw "$(Get-Location) does not contain Dockerfile.windows!"
}
Write-Host -ForegroundColor Green "INFO: docker/docker repository was found"
# Make sure microsoft/windowsservercore:latest image is installed in the control daemon. On public CI machines, windowsservercore.tar and nanoserver.tar
# are pre-baked and tagged appropriately in the c:\baseimages directory, and can be directly loaded.
# Note - this script will only work on 10B (Oct 2016) or later machines! Not 9D or previous due to image tagging assumptions.
#
# On machines not on Microsoft corpnet, or those which have not been pre-baked, we have to docker pull the image in which case it will
# will come in directly as microsoft/windowsservercore:latest. The ultimate goal of all this code is to ensure that whatever,
# we have microsoft/windowsservercore:latest
#
# Note we cannot use (as at Oct 2016) nanoserver as the control daemons base image, even if nanoserver is used in the tests themselves.
$ErrorActionPreference = "SilentlyContinue"
$ControlDaemonBaseImage="windowsservercore"
$readBaseFrom="c"
if ($((docker images --format "{{.Repository}}:{{.Tag}}" | Select-String $("microsoft/"+$ControlDaemonBaseImage+":latest") | Measure-Object -Line).Lines) -eq 0) {
# Try the internal azure CI image version or Microsoft internal corpnet where the base image is already pre-prepared on the disk,
# either through Invoke-DockerCI or, in the case of Azure CI servers, baked into the VHD at the same location.
if (Test-Path $("$env:SOURCES_DRIVE`:\baseimages\"+$ControlDaemonBaseImage+".tar")) {
# An optimization for CI servers to copy it to the D: drive which is an SSD.
if ($env:SOURCES_DRIVE -ne $env:TESTRUN_DRIVE) {
$readBaseFrom=$env:TESTRUN_DRIVE
if (!(Test-Path "$env:TESTRUN_DRIVE`:\baseimages")) {
New-Item "$env:TESTRUN_DRIVE`:\baseimages" -type directory | Out-Null
}
if (!(Test-Path "$env:TESTRUN_DRIVE`:\baseimages\windowsservercore.tar")) {
if (Test-Path "$env:SOURCES_DRIVE`:\baseimages\windowsservercore.tar") {
Write-Host -ForegroundColor Green "INFO: Optimisation - copying $env:SOURCES_DRIVE`:\baseimages\windowsservercore.tar to $env:TESTRUN_DRIVE`:\baseimages"
Copy-Item "$env:SOURCES_DRIVE`:\baseimages\windowsservercore.tar" "$env:TESTRUN_DRIVE`:\baseimages"
}
}
if (!(Test-Path "$env:TESTRUN_DRIVE`:\baseimages\nanoserver.tar")) {
if (Test-Path "$env:SOURCES_DRIVE`:\baseimages\nanoserver.tar") {
Write-Host -ForegroundColor Green "INFO: Optimisation - copying $env:SOURCES_DRIVE`:\baseimages\nanoserver.tar to $env:TESTRUN_DRIVE`:\baseimages"
Copy-Item "$env:SOURCES_DRIVE`:\baseimages\nanoserver.tar" "$env:TESTRUN_DRIVE`:\baseimages"
}
}
$readBaseFrom=$env:TESTRUN_DRIVE
}
Write-Host -ForegroundColor Green "INFO: Loading"$ControlDaemonBaseImage".tar from disk. This may take some time..."
$ErrorActionPreference = "SilentlyContinue"
docker load -i $("$readBaseFrom`:\baseimages\"+$ControlDaemonBaseImage+".tar")
$ErrorActionPreference = "Stop"
if (-not $LastExitCode -eq 0) {
Throw $("ERROR: Failed to load $readBaseFrom`:\baseimages\"+$ControlDaemonBaseImage+".tar")
}
Write-Host -ForegroundColor Green "INFO: docker load of"$ControlDaemonBaseImage" completed successfully"
} else {
# We need to docker pull it instead. It will come in directly as microsoft/imagename:latest
Write-Host -ForegroundColor Green $("INFO: Pulling microsoft/"+$ControlDaemonBaseImage+":latest from docker hub. This may take some time...")
$ErrorActionPreference = "SilentlyContinue"
docker pull $("microsoft/"+$ControlDaemonBaseImage)
$ErrorActionPreference = "Stop"
if (-not $LastExitCode -eq 0) {
Throw $("ERROR: Failed to docker pull microsoft/"+$ControlDaemonBaseImage+":latest.")
}
Write-Host -ForegroundColor Green $("INFO: docker pull of microsoft/"+$ControlDaemonBaseImage+":latest completed successfully")
}
} else {
Write-Host -ForegroundColor Green "INFO: Image"$("microsoft/"+$ControlDaemonBaseImage+":latest")"is already loaded in the control daemon"
}
# Inspect the pulled image to get the version directly
$ErrorActionPreference = "SilentlyContinue"
$imgVersion = $(docker inspect $("microsoft/"+$ControlDaemonBaseImage) --format "{{.OsVersion}}")
$ErrorActionPreference = "Stop"
Write-Host -ForegroundColor Green $("INFO: Version of microsoft/"+$ControlDaemonBaseImage+":latest is '"+$imgVersion+"'")
# Provide the docker version for debugging purposes.
Write-Host -ForegroundColor Green "INFO: Docker version of control daemon"
Write-Host
$ErrorActionPreference = "SilentlyContinue"
docker version
$ErrorActionPreference = "Stop"
if (-not($LastExitCode -eq 0)) {
Write-Host
Write-Host -ForegroundColor Green "---------------------------------------------------------------------------"
Write-Host -ForegroundColor Green " Failed to get a response from the control daemon. It may be down."
Write-Host -ForegroundColor Green " Try re-running this CI job, or ask on #docker-maintainers on docker slack"
Write-Host -ForegroundColor Green " to see if the daemon is running. Also check the service configuration."
Write-Host -ForegroundColor Green " DOCKER_HOST is set to $DOCKER_HOST."
Write-Host -ForegroundColor Green "---------------------------------------------------------------------------"
Write-Host
Throw "ERROR: The control daemon does not appear to be running."
}
Write-Host
# Same as above, but docker info
Write-Host -ForegroundColor Green "INFO: Docker info of control daemon"
Write-Host
$ErrorActionPreference = "SilentlyContinue"
docker info
$ErrorActionPreference = "Stop"
if (-not($LastExitCode -eq 0)) {
Throw "ERROR: The control daemon does not appear to be running."
}
Write-Host
# Get the commit has and verify we have something
$ErrorActionPreference = "SilentlyContinue"
$COMMITHASH=$(git rev-parse --short HEAD)
$ErrorActionPreference = "Stop"
if (-not($LastExitCode -eq 0)) {
Throw "ERROR: Failed to get commit hash. Are you sure this is a docker repository?"
}
Write-Host -ForegroundColor Green "INFO: Commit hash is $COMMITHASH"
# Nuke everything and go back to our sources after
Nuke-Everything
cd "$env:SOURCES_DRIVE`:\$env:SOURCES_SUBDIR\src\github.com\docker\docker"
# Redirect to a temporary location.
$TEMPORIG=$env:TEMP
$env:TEMP="$env:TESTRUN_DRIVE`:\$env:TESTRUN_SUBDIR\CI-$COMMITHASH"
$env:LOCALAPPDATA="$env:TEMP\localappdata"
$errorActionPreference='Stop'
New-Item -ItemType Directory "$env:TEMP" -ErrorAction SilentlyContinue | Out-Null
New-Item -ItemType Directory "$env:TEMP\userprofile" -ErrorAction SilentlyContinue | Out-Null
New-Item -ItemType Directory "$env:TEMP\localappdata" -ErrorAction SilentlyContinue | Out-Null
New-Item -ItemType Directory "$env:TEMP\binary" -ErrorAction SilentlyContinue | Out-Null
New-Item -ItemType Directory "$env:TEMP\installer" -ErrorAction SilentlyContinue | Out-Null
if ($null -eq $env:SKIP_COPY_GO) {
# Wipe the previous version of GO - we're going to get it out of the image
if (Test-Path "$env:TEMP\go") { Remove-Item "$env:TEMP\go" -Recurse -Force -ErrorAction SilentlyContinue | Out-Null }
New-Item -ItemType Directory "$env:TEMP\go" -ErrorAction SilentlyContinue | Out-Null
}
Write-Host -ForegroundColor Green "INFO: Location for testing is $env:TEMP"
# CI Integrity check - ensure Dockerfile.windows and Dockerfile go versions match
$goVersionDockerfileWindows=$(Get-Content ".\Dockerfile.windows" | Select-String "^ENV GO_VERSION" | Select-object -First 1).ToString().Replace("ENV GO_VERSION=","").Replace("\","").Replace("``","").Trim()
$goVersionDockerfile=$(Get-Content ".\Dockerfile" | Select-String "^ENV GO_VERSION" | Select-object -First 1)
# As of go 1.11, Dockerfile changed to be in the format like "FROM golang:1.11.0 AS base".
# If a version number ends with .0 (as in 1.11.0, a convention used in golang docker
# image versions), it needs to be removed (i.e. "1.11.0" becomes "1.11").
if ($null -eq $goVersionDockerfile) {
$goVersionDockerfile=$(Get-Content ".\Dockerfile" | Select-String "^FROM golang:" | Select-object -First 1)
if ($null -ne $goVersionDockerfile) {
$goVersionDockerfile = $goVersionDockerfile.ToString().Split(" ")[1].Split(":")[1] -replace '\.0$',''
}
} else {
$goVersionDockerfile = $goVersionDockerfile.ToString().Split(" ")[2]
}
if ($null -eq $goVersionDockerfile) {
Throw "ERROR: Failed to extract golang version from Dockerfile"
}
Write-Host -ForegroundColor Green "INFO: Validating GOLang consistency in Dockerfile.windows..."
if (-not ($goVersionDockerfile -eq $goVersionDockerfileWindows)) {
Throw "ERROR: Mismatched GO versions between Dockerfile and Dockerfile.windows. Update your PR to ensure that both files are updated and in sync. $goVersionDockerfile $goVersionDockerfileWindows"
}
# Build the image
if ($null -eq $env:SKIP_IMAGE_BUILD) {
Write-Host -ForegroundColor Cyan "`n`nINFO: Building the image from Dockerfile.windows at $(Get-Date)..."
Write-Host
$ErrorActionPreference = "SilentlyContinue"
$Duration=$(Measure-Command { docker build --build-arg=GO_VERSION -t docker -f Dockerfile.windows . | Out-Host })
$ErrorActionPreference = "Stop"
if (-not($LastExitCode -eq 0)) {
Throw "ERROR: Failed to build image from Dockerfile.windows"
}
Write-Host -ForegroundColor Green "INFO: Image build ended at $(Get-Date). Duration`:$Duration"
} else {
Write-Host -ForegroundColor Magenta "WARN: Skipping building the docker image"
}
# Following at the moment must be docker\docker as it's dictated by dockerfile.Windows
$contPath="$COMMITHASH`:c`:\go\src\github.com\docker\docker\bundles"
# After https://github.com/docker/docker/pull/30290, .git was added to .dockerignore. Therefore
# we have to calculate unsupported outside of the container, and pass the commit ID in through
# an environment variable for the binary build
$CommitUnsupported=""
if ($(git status --porcelain --untracked-files=no).Length -ne 0) {
$CommitUnsupported="-unsupported"
}
# Build the binary in a container unless asked to skip it.
if ($null -eq $env:SKIP_BINARY_BUILD) {
Write-Host -ForegroundColor Cyan "`n`nINFO: Building the test binaries at $(Get-Date)..."
$ErrorActionPreference = "SilentlyContinue"
docker rm -f $COMMITHASH 2>&1 | Out-Null
if ($CommitUnsupported -ne "") {
Write-Host ""
Write-Warning "This version is unsupported because there are uncommitted file(s)."
Write-Warning "Either commit these changes, or add them to .gitignore."
git status --porcelain --untracked-files=no | Write-Warning
Write-Host ""
}
$Duration=$(Measure-Command {docker run --name $COMMITHASH -e DOCKER_GITCOMMIT=$COMMITHASH$CommitUnsupported docker hack\make.ps1 -Daemon -Client | Out-Host })
$ErrorActionPreference = "Stop"
if (-not($LastExitCode -eq 0)) {
Throw "ERROR: Failed to build binary"
}
Write-Host -ForegroundColor Green "INFO: Binaries build ended at $(Get-Date). Duration`:$Duration"
# Copy the binaries and the generated version_autogen.go out of the container
$ErrorActionPreference = "SilentlyContinue"
docker cp "$contPath\docker.exe" $env:TEMP\binary\
if (-not($LastExitCode -eq 0)) {
Throw "ERROR: Failed to docker cp the client binary (docker.exe) to $env:TEMP\binary"
}
docker cp "$contPath\dockerd.exe" $env:TEMP\binary\
if (-not($LastExitCode -eq 0)) {
Throw "ERROR: Failed to docker cp the daemon binary (dockerd.exe) to $env:TEMP\binary"
}
$ErrorActionPreference = "Stop"
# Copy the built dockerd.exe to dockerd-$COMMITHASH.exe so that easily spotted in task manager.
Write-Host -ForegroundColor Green "INFO: Copying the built daemon binary to $env:TEMP\binary\dockerd-$COMMITHASH.exe..."
Copy-Item $env:TEMP\binary\dockerd.exe $env:TEMP\binary\dockerd-$COMMITHASH.exe -Force -ErrorAction SilentlyContinue
# Copy the built docker.exe to docker-$COMMITHASH.exe
Write-Host -ForegroundColor Green "INFO: Copying the built client binary to $env:TEMP\binary\docker-$COMMITHASH.exe..."
Copy-Item $env:TEMP\binary\docker.exe $env:TEMP\binary\docker-$COMMITHASH.exe -Force -ErrorAction SilentlyContinue
} else {
Write-Host -ForegroundColor Magenta "WARN: Skipping building the binaries"
}
Write-Host -ForegroundColor Green "INFO: Copying dockerversion from the container..."
$ErrorActionPreference = "SilentlyContinue"
docker cp "$contPath\..\dockerversion\version_autogen.go" "$env:SOURCES_DRIVE`:\$env:SOURCES_SUBDIR\src\github.com\docker\docker\dockerversion"
if (-not($LastExitCode -eq 0)) {
Throw "ERROR: Failed to docker cp the generated version_autogen.go to $env:SOURCES_DRIVE`:\$env:SOURCES_SUBDIR\src\github.com\docker\docker\dockerversion"
}
$ErrorActionPreference = "Stop"
# Grab the golang installer out of the built image. That way, we know we are consistent once extracted and paths set,
# so there's no need to re-deploy on account of an upgrade to the version of GO being used in docker.
if ($null -eq $env:SKIP_COPY_GO) {
Write-Host -ForegroundColor Green "INFO: Copying the golang package from the container to $env:TEMP\installer\go.zip..."
docker cp "$COMMITHASH`:c`:\go.zip" $env:TEMP\installer\
if (-not($LastExitCode -eq 0)) {
Throw "ERROR: Failed to docker cp the golang installer 'go.zip' from container:c:\go.zip to $env:TEMP\installer"
}
$ErrorActionPreference = "Stop"
# Extract the golang installer
Write-Host -ForegroundColor Green "INFO: Extracting go.zip to $env:TEMP\go"
$Duration=$(Measure-Command { Expand-Archive $env:TEMP\installer\go.zip $env:TEMP -Force | Out-Null})
Write-Host -ForegroundColor Green "INFO: Extraction ended at $(Get-Date). Duration`:$Duration"
} else {
Write-Host -ForegroundColor Magenta "WARN: Skipping copying and extracting golang from the image"
}
# Set the GOPATH
Write-Host -ForegroundColor Green "INFO: Updating the golang and path environment variables"
$env:GOPATH="$env:SOURCES_DRIVE`:\$env:SOURCES_SUBDIR"
Write-Host -ForegroundColor Green "INFO: GOPATH=$env:GOPATH"
# Set the path to have the version of go from the image at the front
$env:PATH="$env:TEMP\go\bin;$env:PATH"
# Set the GOROOT to be our copy of go from the image
$env:GOROOT="$env:TEMP\go"
Write-Host -ForegroundColor Green "INFO: $(go version)"
# Work out the -H parameter for the daemon under test (DASHH_DUT) and client under test (DASHH_CUT)
#$DASHH_DUT="npipe:////./pipe/$COMMITHASH" # Can't do remote named pipe
#$ip = (resolve-dnsname $env:COMPUTERNAME -type A -NoHostsFile -LlmnrNetbiosOnly).IPAddress # Useful to tie down
$DASHH_CUT="tcp://127.0.0.1`:2357" # Not a typo for 2375!
$DASHH_DUT="tcp://0.0.0.0:2357" # Not a typo for 2375!
# Arguments for the daemon under test
$dutArgs=@()
$dutArgs += "-H $DASHH_DUT"
$dutArgs += "--data-root $env:TEMP\daemon"
$dutArgs += "--pidfile $env:TEMP\docker.pid"
# Save the PID file so we can nuke it if set
$pidFile="$env:TEMP\docker.pid"
# Arguments: Are we starting the daemon under test in debug mode?
if (-not ("$env:DOCKER_DUT_DEBUG" -eq "")) {
Write-Host -ForegroundColor Green "INFO: Running the daemon under test in debug mode"
$dutArgs += "-D"
}
# Arguments: Are we starting the daemon under test with Hyper-V containers as the default isolation?
if (-not ("$env:DOCKER_DUT_HYPERV" -eq "")) {
Write-Host -ForegroundColor Green "INFO: Running the daemon under test with Hyper-V containers as the default"
$dutArgs += "--exec-opt isolation=hyperv"
}
# Start the daemon under test, ensuring everything is redirected to folders under $TEMP.
# Important - we launch the -$COMMITHASH version so that we can kill it without
# killing the control daemon.
Write-Host -ForegroundColor Green "INFO: Starting a daemon under test..."
Write-Host -ForegroundColor Green "INFO: Args: $dutArgs"
New-Item -ItemType Directory $env:TEMP\daemon -ErrorAction SilentlyContinue | Out-Null
# In LCOW mode, for now we need to set an environment variable before starting the daemon under test
if (($null -ne $env:LCOW_MODE) -or ($null -ne $env:LCOW_BASIC_MODE)) {
$env:LCOW_SUPPORTED=1
}
# Cannot fathom why, but always writes to stderr....
Start-Process "$env:TEMP\binary\dockerd-$COMMITHASH" `
-ArgumentList $dutArgs `
-RedirectStandardOutput "$env:TEMP\dut.out" `
-RedirectStandardError "$env:TEMP\dut.err"
Write-Host -ForegroundColor Green "INFO: Process started successfully."
$daemonStarted=1
# In LCOW mode, turn off that variable
if (($null -ne $env:LCOW_MODE) -or ($null -ne $env:LCOW_BASIC_MODE)) {
$env:LCOW_SUPPORTED=""
}
# Start tailing the daemon under test if the command is installed
if ($null -ne (Get-Command "tail" -ErrorAction SilentlyContinue)) {
$tail = start-process "tail" -ArgumentList "-f $env:TEMP\dut.out" -ErrorAction SilentlyContinue
}
# Verify we can get the daemon under test to respond
$tries=20
Write-Host -ForegroundColor Green "INFO: Waiting for the daemon under test to start..."
while ($true) {
$ErrorActionPreference = "SilentlyContinue"
& "$env:TEMP\binary\docker-$COMMITHASH" "-H=$($DASHH_CUT)" version 2>&1 | Out-Null
$ErrorActionPreference = "Stop"
if ($LastExitCode -eq 0) {
break
}
$tries--
if ($tries -le 0) {
Throw "ERROR: Failed to get a response from the daemon under test"
}
Write-Host -NoNewline "."
sleep 1
}
Write-Host -ForegroundColor Green "INFO: Daemon under test started and replied!"
# Provide the docker version of the daemon under test for debugging purposes.
Write-Host -ForegroundColor Green "INFO: Docker version of the daemon under test"
Write-Host
$ErrorActionPreference = "SilentlyContinue"
& "$env:TEMP\binary\docker-$COMMITHASH" "-H=$($DASHH_CUT)" version
$ErrorActionPreference = "Stop"
if ($LastExitCode -ne 0) {
Throw "ERROR: The daemon under test does not appear to be running."
}
Write-Host
# Same as above but docker info
Write-Host -ForegroundColor Green "INFO: Docker info of the daemon under test"
Write-Host
$ErrorActionPreference = "SilentlyContinue"
& "$env:TEMP\binary\docker-$COMMITHASH" "-H=$($DASHH_CUT)" info
$ErrorActionPreference = "Stop"
if ($LastExitCode -ne 0) {
Throw "ERROR: The daemon under test does not appear to be running."
}
Write-Host
# Same as above but docker images
Write-Host -ForegroundColor Green "INFO: Docker images of the daemon under test"
Write-Host
$ErrorActionPreference = "SilentlyContinue"
& "$env:TEMP\binary\docker-$COMMITHASH" "-H=$($DASHH_CUT)" images
$ErrorActionPreference = "Stop"
if ($LastExitCode -ne 0) {
Throw "ERROR: The daemon under test does not appear to be running."
}
Write-Host
# Don't need Windows images when in LCOW mode.
if (($null -eq $env:LCOW_MODE) -and ($null -eq $env:LCOW_BASIC_MODE)) {
# Default to windowsservercore for the base image used for the tests. The "docker" image
# and the control daemon use microsoft/windowsservercore regardless. This is *JUST* for the tests.
if ($null -eq $env:WINDOWS_BASE_IMAGE) {
$env:WINDOWS_BASE_IMAGE="microsoft/windowsservercore"
}
# Lowercase and make sure it has a microsoft/ prefix
$env:WINDOWS_BASE_IMAGE = $env:WINDOWS_BASE_IMAGE.ToLower()
if ($($env:WINDOWS_BASE_IMAGE -Split "/")[0] -ne "microsoft") {
Throw "ERROR: WINDOWS_BASE_IMAGE should start microsoft/"
}
Write-Host -ForegroundColor Green "INFO: Base image for tests is $env:WINDOWS_BASE_IMAGE"
$ErrorActionPreference = "SilentlyContinue"
if ($((& "$env:TEMP\binary\docker-$COMMITHASH" "-H=$($DASHH_CUT)" images --format "{{.Repository}}:{{.Tag}}" | Select-String $($env:WINDOWS_BASE_IMAGE+":latest") | Measure-Object -Line).Lines) -eq 0) {
# Try the internal azure CI image version or Microsoft internal corpnet where the base image is already pre-prepared on the disk,
# either through Invoke-DockerCI or, in the case of Azure CI servers, baked into the VHD at the same location.
if (Test-Path $("c:\baseimages\"+$($env:WINDOWS_BASE_IMAGE -Split "/")[1]+".tar")) {
Write-Host -ForegroundColor Green "INFO: Loading"$($env:WINDOWS_BASE_IMAGE -Split "/")[1]".tar from disk into the daemon under test. This may take some time..."
$ErrorActionPreference = "SilentlyContinue"
& "$env:TEMP\binary\docker-$COMMITHASH" "-H=$($DASHH_CUT)" load -i $("$readBaseFrom`:\baseimages\"+$($env:WINDOWS_BASE_IMAGE -Split "/")[1]+".tar")
$ErrorActionPreference = "Stop"
if (-not $LastExitCode -eq 0) {
Throw $("ERROR: Failed to load $readBaseFrom`:\baseimages\"+$($env:WINDOWS_BASE_IMAGE -Split "/")[1]+".tar into daemon under test")
}
Write-Host -ForegroundColor Green "INFO: docker load of"$($env:WINDOWS_BASE_IMAGE -Split "/")[1]" into daemon under test completed successfully"
} else {
# We need to docker pull it instead. It will come in directly as microsoft/imagename:latest
Write-Host -ForegroundColor Green $("INFO: Pulling "+$env:WINDOWS_BASE_IMAGE+":latest from docker hub into daemon under test. This may take some time...")
$ErrorActionPreference = "SilentlyContinue"
& "$env:TEMP\binary\docker-$COMMITHASH" "-H=$($DASHH_CUT)" pull $($env:WINDOWS_BASE_IMAGE)
$ErrorActionPreference = "Stop"
if (-not $LastExitCode -eq 0) {
Throw $("ERROR: Failed to docker pull "+$env:WINDOWS_BASE_IMAGE+":latest into daemon under test.")
}
Write-Host -ForegroundColor Green $("INFO: docker pull of "+$env:WINDOWS_BASE_IMAGE+":latest into daemon under test completed successfully")
}
} else {
Write-Host -ForegroundColor Green "INFO: Image"$($env:WINDOWS_BASE_IMAGE+":latest")"is already loaded in the daemon under test"
}
# Inspect the pulled or loaded image to get the version directly
$ErrorActionPreference = "SilentlyContinue"
$dutimgVersion = $(&"$env:TEMP\binary\docker-$COMMITHASH" "-H=$($DASHH_CUT)" inspect $($env:WINDOWS_BASE_IMAGE) --format "{{.OsVersion}}")
$ErrorActionPreference = "Stop"
Write-Host -ForegroundColor Green $("INFO: Version of "+$env:WINDOWS_BASE_IMAGE+":latest is '"+$dutimgVersion+"'")
}
# Run the validation tests unless SKIP_VALIDATION_TESTS is defined.
if ($null -eq $env:SKIP_VALIDATION_TESTS) {
Write-Host -ForegroundColor Cyan "INFO: Running validation tests at $(Get-Date)..."
$ErrorActionPreference = "SilentlyContinue"
$Duration=$(Measure-Command { hack\make.ps1 -DCO -GoFormat -PkgImports | Out-Host })
$ErrorActionPreference = "Stop"
if (-not($LastExitCode -eq 0)) {
Throw "ERROR: Validation tests failed"
}
Write-Host -ForegroundColor Green "INFO: Validation tests ended at $(Get-Date). Duration`:$Duration"
} else {
Write-Host -ForegroundColor Magenta "WARN: Skipping validation tests"
}
# Note the unit tests won't work in LCOW mode as I turned off loading the base images above.
# Run the unit tests inside a container unless SKIP_UNIT_TESTS is defined
if (($null -eq $env:LCOW_MODE) -and ($null -eq $env:LCOW_BASIC_MODE)) {
if ($null -eq $env:SKIP_UNIT_TESTS) {
Write-Host -ForegroundColor Cyan "INFO: Running unit tests at $(Get-Date)..."
$ErrorActionPreference = "SilentlyContinue"
$Duration=$(Measure-Command {docker run -e DOCKER_GITCOMMIT=$COMMITHASH$CommitUnsupported docker hack\make.ps1 -TestUnit | Out-Host })
$ErrorActionPreference = "Stop"
if (-not($LastExitCode -eq 0)) {
Throw "ERROR: Unit tests failed"
}
Write-Host -ForegroundColor Green "INFO: Unit tests ended at $(Get-Date). Duration`:$Duration"
} else {
Write-Host -ForegroundColor Magenta "WARN: Skipping unit tests"
}
}
# Add the Windows busybox image. Needed for WCOW integration tests
if (($null -eq $env:LCOW_MODE) -and ($null -eq $env:LCOW_BASIC_MODE)) {
if ($null -eq $env:SKIP_INTEGRATION_TESTS) {
$ErrorActionPreference = "SilentlyContinue"
# Build it regardless while switching between nanoserver and windowsservercore
#$bbCount = $(& "$env:TEMP\binary\docker-$COMMITHASH" "-H=$($DASHH_CUT)" images | Select-String "busybox" | Measure-Object -line).Lines
#$ErrorActionPreference = "Stop"
#if (-not($LastExitCode -eq 0)) {
# Throw "ERROR: Could not determine if busybox image is present"
#}
#if ($bbCount -eq 0) {
Write-Host -ForegroundColor Green "INFO: Building busybox"
$ErrorActionPreference = "SilentlyContinue"
# This is a temporary hack for nanoserver
if ($env:WINDOWS_BASE_IMAGE -ne "microsoft/windowsservercore") {
Write-Host -ForegroundColor Red "HACK HACK HACK - Building 64-bit nanoserver busybox image"
$(& "$env:TEMP\binary\docker-$COMMITHASH" "-H=$($DASHH_CUT)" build -t busybox https://raw.githubusercontent.com/jhowardmsft/busybox64/v1.1/Dockerfile | Out-Host)
} else {
$(& "$env:TEMP\binary\docker-$COMMITHASH" "-H=$($DASHH_CUT)" build -t busybox https://raw.githubusercontent.com/jhowardmsft/busybox/v1.1/Dockerfile | Out-Host)
}
$ErrorActionPreference = "Stop"
if (-not($LastExitCode -eq 0)) {
Throw "ERROR: Failed to build busybox image"
}
#}
Write-Host -ForegroundColor Green "INFO: Docker images of the daemon under test"
Write-Host
$ErrorActionPreference = "SilentlyContinue"
& "$env:TEMP\binary\docker-$COMMITHASH" "-H=$($DASHH_CUT)" images
$ErrorActionPreference = "Stop"
if ($LastExitCode -ne 0) {
Throw "ERROR: The daemon under test does not appear to be running."
}
Write-Host
}
}
# Run the WCOW integration tests unless SKIP_INTEGRATION_TESTS is defined
if (($null -eq $env:LCOW_MODE) -and ($null -eq $env:LCOW_BASIC_MODE)) {
if ($null -eq $env:SKIP_INTEGRATION_TESTS) {
Write-Host -ForegroundColor Cyan "INFO: Running integration tests at $(Get-Date)..."
$ErrorActionPreference = "SilentlyContinue"
# Location of the daemon under test.
$env:OrigDOCKER_HOST="$env:DOCKER_HOST"
#https://blogs.technet.microsoft.com/heyscriptingguy/2011/09/20/solve-problems-with-external-command-lines-in-powershell/ is useful to see tokenising
$c = "go test "
$c += "`"-check.v`" "
if ($null -ne $env:INTEGRATION_TEST_NAME) { # Makes is quicker for debugging to be able to run only a subset of the integration tests
$c += "`"-check.f`" "
$c += "`"$env:INTEGRATION_TEST_NAME`" "
Write-Host -ForegroundColor Magenta "WARN: Only running integration tests matching $env:INTEGRATION_TEST_NAME"
}
$c += "`"-tags`" " + "`"autogen`" "
$c += "`"-check.timeout`" " + "`"10m`" "
$c += "`"-test.timeout`" " + "`"200m`" "
if ($null -ne $env:INTEGRATION_IN_CONTAINER) {
Write-Host -ForegroundColor Green "INFO: Integration tests being run inside a container"
# Note we talk back through the containers gateway address
# And the ridiculous lengths we have to go to get the default gateway address... (GetNetIPConfiguration doesn't work in nanoserver)
# I just could not get the escaping to work in a single command, so output $c to a file and run that in the container instead...
# Not the prettiest, but it works.
$c | Out-File -Force "$env:TEMP\binary\runIntegrationCLI.ps1"
$Duration= $(Measure-Command { & docker run `
--rm `
-e c=$c `
--workdir "c`:\go\src\github.com\docker\docker\integration-cli" `
-v "$env:TEMP\binary`:c:\target" `
docker `
"`$env`:PATH`='c`:\target;'+`$env:PATH`; `$env:DOCKER_HOST`='tcp`://'+(ipconfig | select -last 1).Substring(39)+'`:2357'; c:\target\runIntegrationCLI.ps1" | Out-Host } )
} else {
$env:DOCKER_HOST=$DASHH_CUT
$env:PATH="$env:TEMP\binary;$env:PATH;" # Force to use the test binaries, not the host ones.
Write-Host -ForegroundColor Green "INFO: DOCKER_HOST at $DASHH_CUT"
$ErrorActionPreference = "SilentlyContinue"
Write-Host -ForegroundColor Cyan "INFO: Integration API tests being run from the host:"
if (!($env:INTEGRATION_TESTFLAGS)) {
$env:INTEGRATION_TESTFLAGS = "-test.v"
}
Set-Location "$env:SOURCES_DRIVE`:\$env:SOURCES_SUBDIR\src\github.com\docker\docker"
$start=(Get-Date); Invoke-Expression ".\hack\make.ps1 -TestIntegration"; $Duration=New-Timespan -Start $start -End (Get-Date)
$ErrorActionPreference = "Stop"
if (-not($LastExitCode -eq 0)) {
Throw "ERROR: Integration API tests failed at $(Get-Date). Duration`:$Duration"
}
$ErrorActionPreference = "SilentlyContinue"
Write-Host -ForegroundColor Green "INFO: Integration CLI tests being run from the host:"
Write-Host -ForegroundColor Green "INFO: $c"
Set-Location "$env:SOURCES_DRIVE`:\$env:SOURCES_SUBDIR\src\github.com\docker\docker\integration-cli"
# Explicit to not use measure-command otherwise don't get output as it goes
$start=(Get-Date); Invoke-Expression $c; $Duration=New-Timespan -Start $start -End (Get-Date)
}
$ErrorActionPreference = "Stop"
if (-not($LastExitCode -eq 0)) {
Throw "ERROR: Integration CLI tests failed at $(Get-Date). Duration`:$Duration"
}
Write-Host -ForegroundColor Green "INFO: Integration tests ended at $(Get-Date). Duration`:$Duration"
} else {
Write-Host -ForegroundColor Magenta "WARN: Skipping integration tests"
}
} else {
# The LCOW version of the tests here
if ($null -eq $env:SKIP_INTEGRATION_TESTS) {
Write-Host -ForegroundColor Cyan "INFO: Running LCOW tests at $(Get-Date)..."
$ErrorActionPreference = "SilentlyContinue"
# Location of the daemon under test.
$env:OrigDOCKER_HOST="$env:DOCKER_HOST"
# Make sure we are pointing at the DUT
$env:DOCKER_HOST=$DASHH_CUT
Write-Host -ForegroundColor Green "INFO: DOCKER_HOST at $DASHH_CUT"
# Force to use the test binaries, not the host ones.
$env:PATH="$env:TEMP\binary;$env:PATH;"
if ($null -ne $env:LCOW_BASIC_MODE) {
$wc = New-Object net.webclient
try {
Write-Host -ForegroundColor green "INFO: Downloading latest execution script..."
$wc.Downloadfile("https://raw.githubusercontent.com/jhowardmsft/docker-w2wCIScripts/master/runCI/lcowbasicvalidation.ps1", "$env:TEMP\binary\lcowbasicvalidation.ps1")
}
catch [System.Net.WebException]
{
Throw ("Failed to download: $_")
}
# Explicit to not use measure-command otherwise don't get output as it goes
$ErrorActionPreference = "Stop"
$start=(Get-Date); Invoke-Expression "powershell $env:TEMP\binary\lcowbasicvalidation.ps1"; $lec=$lastExitCode; $Duration=New-Timespan -Start $start -End (Get-Date)
$Duration=New-Timespan -Start $start -End (Get-Date)
Write-Host -ForegroundColor Green "INFO: LCOW tests ended at $(Get-Date). Duration`:$Duration"
if ($lec -ne 0) {
Throw "LCOW validation tests failed"
}
} else {
#https://blogs.technet.microsoft.com/heyscriptingguy/2011/09/20/solve-problems-with-external-command-lines-in-powershell/ is useful to see tokenising
$c = "go test "
$c += "`"-check.v`" "
if ($null -ne $env:INTEGRATION_TEST_NAME) { # Makes is quicker for debugging to be able to run only a subset of the integration tests
$c += "`"-check.f`" "
$c += "`"$env:INTEGRATION_TEST_NAME`" "
Write-Host -ForegroundColor Magenta "WARN: Only running LCOW integration tests matching $env:INTEGRATION_TEST_NAME"
}
$c += "`"-tags`" " + "`"autogen`" "
$c += "`"-check.timeout`" " + "`"10m`" "
$c += "`"-test.timeout`" " + "`"200m`" "
Write-Host -ForegroundColor Green "INFO: LCOW Integration tests being run from the host:"
Set-Location "$env:SOURCES_DRIVE`:\$env:SOURCES_SUBDIR\src\github.com\docker\docker\integration-cli"
Write-Host -ForegroundColor Green "INFO: $c"
Write-Host -ForegroundColor Green "INFO: DOCKER_HOST at $DASHH_CUT"
# Explicit to not use measure-command otherwise don't get output as it goes
$start=(Get-Date); Invoke-Expression $c; $Duration=New-Timespan -Start $start -End (Get-Date)
}
$ErrorActionPreference = "Stop"
if (-not($LastExitCode -eq 0)) {
Throw "ERROR: Integration tests failed at $(Get-Date). Duration`:$Duration"
}
Write-Host -ForegroundColor Green "INFO: Integration tests ended at $(Get-Date). Duration`:$Duration"
} else {
Write-Host -ForegroundColor Magenta "WARN: Skipping LCOW tests"
}
}
# Docker info now to get counts (after or if jjh/containercounts is merged)
if ($daemonStarted -eq 1) {
Write-Host -ForegroundColor Green "INFO: Docker info of the daemon under test at end of run"
Write-Host
$ErrorActionPreference = "SilentlyContinue"
& "$env:TEMP\binary\docker-$COMMITHASH" "-H=$($DASHH_CUT)" info
$ErrorActionPreference = "Stop"
if ($LastExitCode -ne 0) {
Throw "ERROR: The daemon under test does not appear to be running."
}
Write-Host
}
# Stop the daemon under test
if (Test-Path "$env:TEMP\docker.pid") {
$p=Get-Content "$env:TEMP\docker.pid" -raw
if (($null -ne $p) -and ($daemonStarted -eq 1)) {
Write-Host -ForegroundColor green "INFO: Stopping daemon under test"
taskkill -f -t -pid $p
#sleep 5
}
Remove-Item "$env:TEMP\docker.pid" -force -ErrorAction SilentlyContinue
}
Write-Host -ForegroundColor Green "INFO: executeCI.ps1 Completed successfully at $(Get-Date)."
}
Catch [Exception] {
$FinallyColour="Red"
Write-Host -ForegroundColor Red ("`r`n`r`nERROR: Failed '$_' at $(Get-Date)")
Write-Host -ForegroundColor Red ($_.InvocationInfo.PositionMessage)
Write-Host "`n`n"
# Exit to ensure Jenkins captures it. Don't do this in the ISE or interactive Powershell - they will catch the Throw onwards.
if ( ([bool]([Environment]::GetCommandLineArgs() -Like '*-NonInteractive*')) -and `
([bool]([Environment]::GetCommandLineArgs() -NotLike "*Powershell_ISE.exe*"))) {
exit 1
}
Throw $_
}
Finally {
$ErrorActionPreference="SilentlyContinue"
$global:ProgressPreference=$origProgressPreference
Write-Host -ForegroundColor Green "INFO: Tidying up at end of run"
# Restore the path
if ($null -ne $origPath) { $env:PATH=$origPath }
# Restore the DOCKER_HOST
if ($null -ne $origDOCKER_HOST) { $env:DOCKER_HOST=$origDOCKER_HOST }
# Restore the GOROOT and GOPATH variables
if ($null -ne $origGOROOT) { $env:GOROOT=$origGOROOT }
if ($null -ne $origGOPATH) { $env:GOPATH=$origGOPATH }
# Dump the daemon log. This will include any possible panic stack in the .err.
if (($daemonStarted -eq 1) -and ($(Get-Item "$env:TEMP\dut.err").Length -gt 0)) {
Write-Host -ForegroundColor Cyan "----------- DAEMON LOG ------------"
Get-Content "$env:TEMP\dut.err" -ErrorAction SilentlyContinue | Write-Host -ForegroundColor Cyan
Write-Host -ForegroundColor Cyan "----------- END DAEMON LOG --------"
}
# Save the daemon under test log
if ($daemonStarted -eq 1) {
Write-Host -ForegroundColor Green "INFO: Saving daemon under test log ($env:TEMP\dut.out) to $TEMPORIG\CIDUT.out"
Copy-Item "$env:TEMP\dut.out" "$TEMPORIG\CIDUT.out" -Force -ErrorAction SilentlyContinue
Write-Host -ForegroundColor Green "INFO: Saving daemon under test log ($env:TEMP\dut.err) to $TEMPORIG\CIDUT.err"
Copy-Item "$env:TEMP\dut.err" "$TEMPORIG\CIDUT.err" -Force -ErrorAction SilentlyContinue
}
Set-Location "$env:SOURCES_DRIVE\$env:SOURCES_SUBDIR" -ErrorAction SilentlyContinue
Nuke-Everything
$Dur=New-TimeSpan -Start $StartTime -End $(Get-Date)
Write-Host -ForegroundColor $FinallyColour "`nINFO: executeCI.ps1 exiting at $(date). Duration $dur`n"
}