#
 # Sample OpenVPN configuration file for
 # office using a pre-shared static key.
 #
 # '#' or ';' may be used to delimit comments.
 
 # Use a dynamic tun device.
 # For Linux 2.2 or non-Linux OSes,
 # you may want to use an explicit
 # unit number such as "tun1".
 # OpenVPN also supports virtual
 # ethernet "tap" devices.
 dev tun
 
 # 10.1.0.1 is our local VPN endpoint (office).
 # 10.1.0.2 is our remote VPN endpoint (home).
 ifconfig 10.1.0.1 10.1.0.2
 
 # Our up script will establish routes
 # once the VPN is alive.
 up ./office.up
 
 # Our pre-shared static key
 secret static.key
 
 # OpenVPN 2.0 uses UDP port 1194 by default
 # (official port assignment by iana.org 11/04).
 # OpenVPN 1.x uses UDP port 5000 by default.
 # Each OpenVPN tunnel must use
 # a different port number.
 # lport or rport can be used
 # to denote different ports
 # for local and remote.
 ; port 1194
 
 # Downgrade UID and GID to
 # "nobody" after initialization
 # for extra security.
 ; user nobody
 ; group nobody
 
 # If you built OpenVPN with
 # LZO compression, uncomment
 # out the following line.
 ; comp-lzo
 
 # Send a UDP ping to remote once
 # every 15 seconds to keep
 # stateful firewall connection
 # alive.  Uncomment this
 # out if you are using a stateful
 # firewall.
 ; ping 15
 
 # Uncomment this section for a more reliable detection when a system
 # loses its connection.  For example, dial-ups or laptops that
 # travel to other locations.
 ; ping 15
 ; ping-restart 45
 ; ping-timer-rem
 ; persist-tun
 ; persist-key
 
 # Verbosity level.
 # 0 -- quiet except for fatal errors.
 # 1 -- mostly quiet, but display non-fatal network errors.
 # 3 -- medium output, good for normal operation.
 # 9 -- verbose, good for troubleshooting
 verb 3