#
 # this is sourced from t_client.sh and defines which openvpn client tests
 # to run
 #
 # (sample config, copy to t_client.rc and adapt to your environment)
 #
 #
 # define these - if empty, no tests will run
 #
 CA_CERT="/home/openvpn-test-ca/keys/ca.crt"
 CLIENT_KEY="/home/openvpn-test-ca/keys/client-test.key"
 CLIENT_CERT="/home/openvpn-test-ca/keys/client-test.crt"
 #
 # remote host (used as macro below)
 #
 REMOTE=mytestserver
 #
 # tests to run (list suffixes for config stanzas below)
 #
 TEST_RUN_LIST="1 2"
 
 #

 # use "sudo" (etc) to give openvpn the necessary privileges
 # if this is not active, "make check" must be run as root
 #
 #RUN_SUDO=sudo
 
 #

 # base confic that is the same for all the p2mp test runs
 #
 OPENVPN_BASE_P2MP="--client --ca $CA_CERT \
 	--cert $CLIENT_CERT --key $CLIENT_KEY \
 	--ns-cert-type server --nobind --comp-lzo --verb 3"
 
 # base config for p2p tests
 #
 OPENVPN_BASE_P2P="..."
 
 #
 #
 # now define the individual tests - all variables suffixed with _1, _2 etc
 # will be used in test run "1", "2", etc.
 #
 # if something is not defined here, the corresponding test is not run
 #
 # possible test options:
 #

 # RUN_TITLE_x="what is being tested on here" (purely informational)

 # OPENVPN_CONF_x = "how to call ./openvpn" [mandatory]
 # EXPECT_IFCONFIG4_x = "this IPv4 address needs to show up in ifconfig"
 # EXPECT_IFCONFIG6_x = "this IPv6 address needs to show up in ifconfig"
 # PING4_HOSTS_x = "these hosts musts ping when openvpn is up (IPv4 fping)"
 # PING6_HOSTS_x = "these hosts musts ping when openvpn is up (IPv6 fping6)"
 #
 # Test 1: UDP / p2mp tun
 #   specify IPv4+IPv6 addresses expected from server and ping targets
 #

 RUN_TITLE_1="testing tun/udp/ipv4+ipv6"

 OPENVPN_CONF_1="$OPENVPN_BASE_P2MP --dev tun --proto udp --remote $REMOTE --port 51194"
 EXPECT_IFCONFIG4_1="10.100.50.6"
 EXPECT_IFCONFIG6_1="2001:dba:a050::1:0"
 PING4_HOSTS_1="10.100.50.1 10.100.0.1"
 PING6_HOSTS_1="2001:dba::1 2001:dba:a050::1"
 
 # Test 2: TCP / p2mp tun
 #

 RUN_TITLE_2="testing tun/tcp/ipv4+ipv6"

 OPENVPN_CONF_2="$OPENVPN_BASE_P2MP --dev tun --proto tcp --remote $REMOTE --port 51194"
 EXPECT_IFCONFIG4_2="10.100.51.6"
 EXPECT_IFCONFIG6_2="2001:dba:a051::1:0"
 PING4_HOSTS_2="10.100.51.1 10.100.0.1"
 PING6_HOSTS_1="2001:dba::1 2001:dba:a051::1"
 
 # Test 3: UDP / p2p tun
 # ...
 
 # Test 4: TCP / p2p tun
 # ...
 
 # Test 5: UDP / p2mp tap
 # ...
 
 # Test 6: TCP / p2mp tun
 # ...
 
 # Test 7: UDP / p2p tap
 # ...
 
 # Test 8: TCP / p2p tap
 # ...
 
 # Test 9: whatever you want to test... :-)