Overview of changes in 2.3 ========================== New features ------------ Windows DNS leak fix This feature allows blocking all out-of-tunnel communication on TCP/UDP port 53 (except for OpenVPN itself), preventing DNS Leaks on Windows 8.1 and 10. Client-only support for Peer ID Added new packet format P_DATA_V2, which includes peer-id. If server and client support it, client sends all data packets in the new format. When data packet arrives, server identifies peer by peer-id. If peer's ip/port has changed, server assumes that client has floated, verifies HMAC and updates ip/port in internal structs. OpenvPN 2.3.x has client-side functionality only, server needs 2.4. TLS version negotiation Updated the TLS negotiation logic to adaptively try to connect using the highest TLS version supported by both client and server. The behavior of this feature can be adjusted as necessary. Push peer info Always push basic set of peer info values to server. This allows the server to make informed choices based on the capabilities of the client. The capabilities include things like supported compression algorithms, SSL library version and GUI version. The amount of data transmitted in peer information can be adjusted. PolarSSL support Allow use of PolarSSL in OpenVPN as the crypto library, the SSL library and for providing PKCS#11 support (up to 2.3.9 supporting PolarSSL 1.2, starting with 2.3.10, PolarSSL 1.3). Plug-in API v3 This is a new, more flexible plug-in API. IPv6 payload and transport support Allow tunneling IPv6 traffic inside an IPv6 tunnel, as well as using IPv6 as the transport for OpenVPN traffic. Client-side one-to-one NAT support This feature allows using SNAT or DNAT internally in OpenVPN to work around IP numbering conflicts with pushed routes. Support for a challenge/response protocol Allows an OpenVPN server to generate challenge questions for the user. This can be used to implement multi-factor authentication. Both dynamic and static challenges are supported. Improved UTF-8 support OpenVPN can now manage UTF-8 characters, for example in usernames, passwords, X.509 DNs and Windows paths. Behavioral changes ------------------ - OpenVPN will complain loudly about ciphers with 128-bits block sizes or less - OpenVPN will by default re-negotiate the tunnel after 64MB when used with ciphers using cipher blocks of 128-bits or less - Remove --enable-password-save option to configure, this is now always enabled - Disallow usage of --server-poll-timeout in --secret key mode - The second parameter of --ifconfig is no longer a "remote address" but a "netmask" when using --dev tun and --topology subnet - Automatic TLS version negotiation may cause issues in certain cases. - Don't exit daemon if opening or parsing the CRL fails - Do not upcase x509-username-field for mixed-case arguments - Allow use of connection block variables after connection blocks: this may cause issues in some cases - Always load intermediate certificates from a PKCS#12 file, instead of ignoring them - Remove the --disable-eurephia configure option - Remove the support for using system() when executing external programs or scripts - Inline files are now always enabled - Remove the --auto-proxy option (now handled via management interface) - Directory layout restructuring - A Windows buildsystem is no longer bundled with OpenVPN - Easy-rsa is no longer bundled with OpenVPN - Tap-windows driver sources are no longer bundled with OpenVPN - Made some options connection-entry specific - Make '--win-sys env' default - Do not randomize resolving of IP addresses in getaddr() Version 2.3.14 ============== Behavioral changes ------------------ - On the client side recursively routed packets, which have same destination as the VPN server, are dropped. This could be disabled with --allow-recursive-routing option. Version 2.3.13 ============== - Enforcing a new default value for --reneg-bytes for known weaker ciphers Ciphers with cipher blocks less than 128 bits will now do a renegotiation of the tunnel by default for every 64MB of data. This behaviour can be overridden by explictly setting --reneg-bytes 0 in the configuration file, however this is HIGHLY discouraged. This is to reduce the risk for SWEET32 attacks. The general recommendation is to change the cipher to a stronger cipher. For more information see: https://community.openvpn.net/openvpn/wiki/SWEET32 OpenVPN will also complain a little bit more in the logs when such weaker ciphers is detected. Version 2.3.12 ============== Security changes ---------------- - Deprecation of ciphers using less than 128-bits cipher blocks It is highly recommended to avoid using ciphers listed in the new deprecated section of --show-ciphers. These ciphers are no longer considered safe to use. If you cannot migrate away from these ciphers currently, it is strongly recommended to start using --reneg-bytes with a value less than 64MB. Version 2.3.11 ============== Behavioral changes ------------------ - Stricter default TLS cipher list: disable various old/weak ciphers. This can lead to 'no shared cipher' errors if one of the peers only accepts the older/weaker ciphers. Check your ``--tls-cipher`` settings if this is the case. Disabled ciphers: * Export ciphers (these are broken on purpose...) * Ciphers in the LOW and MEDIUM security cipher list of OpenSSL. The LOW group contains ciphers that are considered insecure (such as DES), and will be completely removed from OpenSSL in 1.1.0, the MEDIUM group contains less-secure ciphers like RC4 and SEED. * Ciphers that were not supported by OpenVPN anyway (cleans up the list) Version 2.3.10 ============== New features ------------ - Windows version is detected, logged and possibly signalled to server Behavioral changes ------------------ - PolarSSL support changed from PolarSSL v1.2 to PolarSSL v1.3, as v1.2 is end-of-support 2015-12-31. - fall back to using interface names for netsh.exe calls on Windows XP (while keeping interface indexes on Windows 7) Version 2.3.9 ============= New features ------------ - Windows DNS leak fix (--block-outside-dns, windows only) - Client-side support for server restart notification - IPv6 address information is now available as environment variables - --auth-user-pass can now work with files that only have a username, and will then only prompt for password Behavioral changes ------------------ - sndbuf and recvbuf default now to OS default instead of 64k - Removed --enable-password-save from configure. This option is now always enabled. - use interface index when calling netsh.exe to configure IPv6 addresses or routes on windows (instead of interface name) - properly reject client connect if "disabled" option (in ccd/ or client-connect script/plugin) - handle Ctrl-C and Ctrl-BREAK events in Windows - do no longer exit if tap6 adapter returns error on Windows suspend/resume - increase control channel packet size for faster handshakes between TLS server and client Bug fixes --------- - repair combination of --auth-user-pass, --daemon and systemd (errors out in 2.3.8 instead of querying systemd) - Lots of bug fixes and documentation improvements Version 2.3.8 ============= Bug fixes --------- - fix various fallouts of the 2.3.7 change where we daemon()ize now first and initialize crypto later - Lots of bug fixes and documentation improvements Behavioral changes ------------------ - print error message if trying to ask for username/password or passphrase and no tty is available (--daemon) - delete ipv6 address on close of linux tun interface (relevant for persistant tun interfaces) Version 2.3.7 ============= Bug fixes --------- - Lots of bug fixes and documentation improvements New features ------------ - include ifconfig\_ environment variables in --up-restart env set - Re-read auth-user-pass file on (re)connect if required Behavioral changes ------------------ - Disallow usage of --server-poll-timeout in --secret key mode - Re-enable TLS version negotiation by default - daemon()ize before initializing crypto (= un-break cryptodev on FreeBSD that does not allow fork() after openssl init) - on FreeBSD and topology subnet, construct a proper address for the remote side of the tun if (not our own) - fix interaction of --peer-id, --link-mtu, OCC and old/new OpenVPN combinations - always disable SSL compression Version 2.3.6 ============= Bug fixes --------- - A few bug fixes and documentation improvement New features ------------ - Add client-only support for peer-id - Add --tls-version-max Version 2.3.5 ============= Bug fixes --------- - Fix server routes not working in topology subnet with --server [v3] - Fix regression with password protected private keys (polarssl) - Fix "code=995" bug with windows NDIS6 tap driver - Lots of other bug fixes Version 2.3.4 ============= Bug fixes --------- - When tls-version-min is unspecified, revert to original versioning approach - IPv6 address/route delete fix for Win8 - Fix SOCKSv5 method selection - Lots of other bug fixes and documentation improvements Version 2.3.3 ============= Bug fixes --------- - Fix slow memory drain on each client renegotiation - Fix spurious ignoring of pushed config options (trac#349) - Lots of bug fixes and documentation improvements New features ------------ - Add reporting of UI version to basic push-peer-info set - Add support to ignore specific options - Add support of utun devices under Mac OS X - Support non-ASCII TAP adapter names on Windows - Support non-ASCII characters in Windows tmp path - Added "setenv opt" directive prefix - --management-external-key for PolarSSL - Add support for client-cert-not-required for PolarSSL Behavioral changes ------------------ - TLS version negotiation - Require polarssl >= 1.2.10 for polarssl-builds, which fixes CVE-2013-5915 Version 2.3.2 ============= Bug fixes --------- - Fix proto tcp6 for server & non-P2MP modes - Fix NULL-pointer crash in route_list_add_vpn_gateway() - Fix problem with UDP tunneling due to mishandled pktinfo structures - Fix segfault when enabling pf plug-ins - Lots of other bug fixes New features ------------ - Always push basic set of peer info values to server - make 'explicit-exit-notify' pullable again Version 2.3.1 ============= Bug fixes --------- - Repair "tcp server queue overflow" brokenness, more <stdbool.h> fallout - Fix directly connected routes for "topology subnet" on Solaris - Use constant time memcmp when comparing HMACs in openvpn_decrypt - Repair "tcp server queue overflow" brokenness, more <stdbool.h> fallout - Lots of other bug fixes and documentation improvements New features ------------ - reintroduce --no-name-remapping option - make --tls-remote compatible with pre 2.3 configs - add new option for X.509 name verification - PolarSSL-1.2 support - Enable TCP_NODELAY configuration on FreeBSD - Permit pool size of /64.../112 for ifconfig-ipv6-pool Behavioral changes ------------------ - Switch to IANA names for TLS ciphers Version 2.3.0 ============= Bug fixes --------- - Fix parameter type for IP_TOS setsockopt on non-Linux systems - Fix client crash on double PUSH_REPLY Version 2.3_rc2 =============== Bug fixes --------- - Fix --show-pkcs11-ids (Bug #239) - Lots of other bug fixes and documentation improvements New features ------------ - Implement --mssfix handling for IPv6 packets Version 2.3_rc1 =============== Bug fixes --------- - Fixed a bug where PolarSSL gave an error when using an inline file tag - Fix v3 plugins to support returning values back to OpenVPN - Lots of other bug fixes and documentation improvements New features ------------ - Support UTF-8 --client-config-dir Behavioral changes ------------------ - Remove the support for using system() when executing external programs or scripts Version 2.3_beta1 ================= Bug fixes --------- - Fixes error: --key fails with EXTERNAL_PRIVATE_KEY: No such file or directory if --management-external-key is used - fix regression with --http-proxy[\-\*] options - Lots of other bug fixes and documentation improvements New features ------------ - Add --compat-names option - add API for plug-ins to write to openvpn log Behavioral changes ------------------ - Keep pre-existing tun/tap devices around on \*BSD Version 2.3_alpha3 ================== Bug fixes --------- - Repair "tap server" mode brokenness caused by <stdbool.h> fallout - make non-blocking connect work on Windows - A few other bug fixes New features ------------ - add option --management-query-proxy Version 2.3_alpha2 ================== Bug fixes --------- - Lots of other bug fixes and documentation improvements New features ------------ - Add missing pieces to IPv6 route gateway handling Behavioral changes ------------------ - Removed support for PolarSSL < 1.1 - Complete overhaul of the project structure and the buildsystem - remove the --auto-proxy option from openvpn Version 2.3-alpha1 ================== Bug fixes --------- - Many \*BSD and Windows bug fixes - Many Windows installer fixes - Properly handle certificate serial numbers > 32 bits - Fixed bug in port-share that could cause port share process to crash - Fixed issue where a client might receive multiple push replies - Lots of other bug fixes and documentation improvements New features ------------ - PolarSSL support - Add plug-in API v3 - IPv6 payload and transport support - New feauture: Add --stale-routes-check - Add support to forward console query to systemd - Windows UTF-8 input/output - Added "management-external-key" option - Added --x509-track option - Added "client-nat" option for stateless, one-to-one NAT on the client side - Extended "client-kill" management interface command - Client will now try to reconnect if no push reply received within handshake-window seconds - Added "management-external-key" option - Added "auth-token" client directive - Added 'dir' flag to "crl-verify" - Added support for static challenge/response protocol - Changed CC_PRINT character class to allow UTF-8 chars - Extend output of "status" management interface command to include usernames - Added "memstats" option to maintain real-time operating stats - Added support for "on-link" routes on Linux client - Add extv3 X509 field support to --x509-username-field Behavioral changes ------------------ - Remove support for Linux 2.2 - Make '--win-sys env' default - Remove --enable-osxipconfig configure option