# Get more options/information on http://elinux.org/RPiconfig
 # or on https://www.raspberrypi.org/documentation/configuration/config-txt.md
 # Our kernels are located on a Linux partition. Chainload U-Boot to load them.
 kernel=u-boot.bin
 # Use 64 MB for GPU for RPi with 256 MB (Min 16 - Max 192 MB)
 gpu_mem_256=64
 # Use 64 MB for GPU for RPi with 512 MB (Min 16 - Max 448 MB)
 gpu_mem_512=64
 # Use 128 MB for GPU for RPi with 1024 MB (Min 16 - Max 944 MB)
 gpu_mem_1024=128
 # Turbo mode: 0 = enable dynamic freq/voltage - 1 = always max
 force_turbo=0
 # Start in turbo mode for 30 seconds or until cpufreq sets a frequency
 initial_turbo=30
 # DO NOT overvoltage manually to not void warranty!
 over_voltage=0
 # Boot in AArch64 (64-bit) mode
 arm_control=0x200
 # Fix mini UART input frequency, and setup/enable up the UART.
 enable_uart=1
 # Disable warning overlays as they don't work well together with linux's graphical output
 avoid_warnings=1