# Running Kubernetes on Photon OS ----------------------------------------------------- - [Prerequisites](#prerequisites) - [Instructions](#instructions) ## Prerequisites * You need two or more machines with the 1.0 general availability or later version of Photon OS installed. ## Instructions This document gets you started using Kubernetes with Photon OS. The instructions present a manual configuration that gets one worker node running to help you understand the underlying packages, services, ports, and so forth. The Kubernetes package provides several services: kube-apiserver, kube-scheduler, kube-controller-manager, kubelet, kube-proxy. These services are managed by systemd. Their configuration resides in a central location: /etc/kubernetes. The following instructions break the services up between the hosts. The first host, `photon-master`, will be the Kubernetes master. This host will run the kube-apiserver, kube-controller-manager, and kube-scheduler. In addition, the master will also run `etcd`. Although `etcd` is not needed on the master if `etcd` runs on a different host, this guide assumes that `etcd` and the Kubernetes master run on the same host. The remaining host, `photon-node`, will be the node; it will run kubelet, proxy, and docker. ### System Information Hosts: ``` photon-master = 192.168.121.9 photon-node = 192.168.121.65 ``` ### Prepare the hosts The following packages should already be installed on the full version of Photon OS, but you might have to install them on the minimal version of Photon OS. If the `tdnf` command returns "Nothing to do," the package is already installed. * Install Kubernetes on all hosts--both `photon-master` and `photon-node`. ``` tdnf install kubernetes ``` * Install iptables on photon-master and photon-node: ``` tdnf install iptables ``` * Open the tcp port 8080 (api service) on the photon-master in the firewall ``` iptables -A INPUT -p tcp --dport 8080 -j ACCEPT ``` * Open the tcp port 10250 (api service) on the photon-node in the firewall ``` iptables -A INPUT -p tcp --dport 10250 -j ACCEPT ``` * Install Docker on photon-node: ``` tdnf install docker ``` * Add master and node to /etc/hosts on all machines (not needed if the hostnames are already in DNS). Make sure that communication works between photon-master and photon-node by using a utility such as ping. ```sh echo "192.168.121.9 photon-master 192.168.121.65 photon-node" >> /etc/hosts ``` * Edit /etc/kubernetes/config, which will be the same on all the hosts (master and node), so that it contains the following lines: ``` # Comma separated list of nodes in the etcd cluster KUBE_MASTER="--master=http://photon-master:8080" # logging to stderr routes it to the systemd journal KUBE_LOGTOSTDERR="--logtostderr=true" # journal message level, 0 is debug KUBE_LOG_LEVEL="--v=0" # Should this cluster be allowed to run privileged docker containers KUBE_ALLOW_PRIV="--allow_privileged=false" ``` ### Configure the Kubernetes services on the master * Edit /etc/kubernetes/apiserver to appear as such. The service_cluster_ip_range IP addresses must be an unused block of addresses, not used anywhere else. They do not need to be routed or assigned to anything. ``` # The address on the local server to listen to. KUBE_API_ADDRESS="--address=0.0.0.0" # Comma separated list of nodes in the etcd cluster KUBE_ETCD_SERVERS="--etcd_servers=http://127.0.0.1:4001" # Address range to use for services KUBE_SERVICE_ADDRESSES="--service-cluster-ip-range=10.254.0.0/16" # Add your own KUBE_API_ARGS="" ``` * Start the appropriate services on master: ``` for SERVICES in etcd kube-apiserver kube-controller-manager kube-scheduler; do systemctl restart $SERVICES systemctl enable $SERVICES systemctl status $SERVICES done ``` * To add the other node, create the following node.json file on the Kubernetes master node: ```json { "apiVersion": "v1", "kind": "Node", "metadata": { "name": "photon-node", "labels":{ "name": "photon-node-label"} }, "spec": { "externalID": "photon-node" } } ``` * Now create a node object internally in your Kubernetes cluster by running the following command: ```console $ kubectl create -f ./node.json $ kubectl get nodes NAME LABELS STATUS photon-node name=photon-node-label Unknown ``` Please note that in the above example, it only creates a representation for the node _photon-node_ internally. It does not provision the actual _photon-node_. Also, it is assumed that _photon-node_ (as specified in `name`) can be resolved and is reachable from the Kubernetes master node. How to provision a Kubernetes node (photon-node) is shown in a later section. ### Configure the Kubernetes services on the node You configure the kubelet on the node as follows. * Edit /etc/kubernetes/kubelet to appear like this: ``` ### # Kubernetes kubelet (node) config # The address for the info server to serve on (set to 0.0.0.0 or "" for all interfaces) KUBELET_ADDRESS="--address=0.0.0.0" # You may leave this blank to use the actual hostname KUBELET_HOSTNAME="--hostname_override=photon-node" # location of the api-server KUBELET_API_SERVER="--api_servers=http://photon-master:8080" # Add your own #KUBELET_ARGS="" ``` * Start the appropriate services on the node (photon-node): ```sh for SERVICES in kube-proxy kubelet docker; do systemctl restart $SERVICES systemctl enable $SERVICES systemctl status $SERVICES done ``` * Check to make sure that the cluster can now see the photon-node on photon-master and that its status changes to _Ready_. ```console kubectl get nodes NAME LABELS STATUS photon-node name=photon-node-label Ready ``` If the node status is `NotReady`, verify that the firewall rules are permissive for Kubernetes. * Deletion of nodes: To delete _photon-node_ from your Kubernetes cluster, one should run the following on photon-master (please do not do it, it is just for information): ```sh kubectl delete -f ./node.json ``` That's it. You should have a functional cluster. You can now launch a test pod. Check out [Kubernetes 101](http://kubernetes.io/docs/user-guide/walkthrough/) for an introduction to working with Kubernetes.