2008-09-10  Michal Ludvig  <michal@logix.cz>

	* testsuite, run-tests.py: Added testsuite with first few tests.

2008-09-10  Michal Ludvig  <michal@logix.cz>

	* s3cmd, S3/S3Uri.py, S3/S3.py: All internal representations of
	  S3Uri()s are Unicode (i.e. not UTF-8 but type()==unicode). It 
	  still doesn't work on non-UTF8 systems though.

2008-09-04  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Rework UTF-8 output to keep sys.stdout untouched (or it'd
	  break 's3cmd get' to stdout for binary files).

2008-09-03  Michal Ludvig  <michal@logix.cz>

	* s3cmd, S3/S3.py, S3/Config.py: Removed --use-old-connect-method
	  again. Autodetect the need for old connect method instead.

2008-09-03  Michal Ludvig  <michal@logix.cz>

	* s3cmd, S3/S3.py: Make --verbose mode more useful and default 
	  mode less verbose.

2008-09-03  Michal Ludvig  <michal@logix.cz>

	* s3cmd, S3/Config.py: [rb] Allow removal of non-empty buckets
	  with --force.
	  [mb, rb] Allow multiple arguments, i.e. create or remove
	  multiple buckets at once.
	  [del] Perform recursive removal with --recursive (or -r).

2008-09-01  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Refuse 'sync' together with '--encrypt'.
	* S3/S3.py: removed object_{get,put,delete}_uri() functions
	  and made object_{get,put,delete}() accept URI instead of 
	  bucket/object parameters.

2008-09-01  Michal Ludvig  <michal@logix.cz>

	* S3/PkgInfo.py: Bumped up version to 0.9.9-pre1

2008-09-01  Michal Ludvig  <michal@logix.cz>

	* s3cmd, S3/S3.py, S3/Config.py: Allow access to upper-case
	  named buckets again with --use-old-connect-method 
	  (uses http://s3.amazonaws.com/bucket/object instead of
	  http://bucket.s3.amazonaws.com/object)

2008-08-19  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Always output UTF-8, even on output redirects.

2008-08-01  Michal Ludvig  <michal@logix.cz>

	* TODO: Add some items

2008-07-29  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.8.3
	  ------------------------

2008-07-29  Michal Ludvig  <michal@logix.cz>

	* S3/PkgInfo.py: Bumped up version to 0.9.8.3
	* NEWS: Added 0.9.8.3

2008-07-29  Michal Ludvig  <michal@logix.cz>

	* S3/Utils.py (hash_file_md5): Hash files in 32kB chunks
	  instead of reading it all up to a memory first to avoid
	  OOM on large files.

2008-07-07  Michal Ludvig  <michal@logix.cz>

	* s3cmd.1: couple of syntax fixes from Mikhail Gusarov

2008-07-03  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.8.2
	  ------------------------

2008-07-03  Michal Ludvig  <michal@logix.cz>

	* S3/PkgInfo.py: Bumped up version to 0.9.8.2
	* NEWS: Added 0.9.8.2
	* s3cmd: Print version info on 'unexpected error' output.

2008-06-30  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py: Re-upload when Amazon doesn't send ETag
	  in PUT response. It happens from time to time for
	  unknown reasons. Thanks "Burtc" for report and
	  "hermzz" for fix.

2008-06-27  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.8.1
	  ------------------------

2008-06-27  Michal Ludvig  <michal@logix.cz>

	* S3/PkgInfo.py: Bumped up version to 0.9.8.1
	* NEWS: Added 0.9.8.1
	* s3cmd: make 'cfg' global
	* run-tests.sh: Sort-of testsuite

2008-06-23  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.8
	  ----------------------

2008-06-23  Michal Ludvig  <michal@logix.cz>

	* S3/PkgInfo.py: Bumped up version to 0.9.8
	* NEWS: Added 0.9.8
	* TODO: Removed completed tasks

2008-06-23  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Last-minute compatibility fixes for Python 2.4
	* s3cmd, s3cmd.1: --debug-exclude is an alias for --debug-syncmatch
	* s3cmd: Don't require $HOME env variable to be set.
	  Fixes #2000133
	* s3cmd: Wrapped all execution in a try/except block
	  to catch all exceptions and ask for a report.

2008-06-18  Michal Ludvig  <michal@logix.cz>

	* S3/PkgInfo.py: Version 0.9.8-rc3

2008-06-18  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py: Bucket name can't contain upper-case letters (S3/DNS limitation).

2008-06-12  Michal Ludvig  <michal@logix.cz>

	* S3/PkgInfo.py: Version 0.9.8-rc2

2008-06-12  Michal Ludvig  <michal@logix.cz>

	* s3cmd, s3cmd.1: Added GLOB (shell-style wildcard) exclude, renamed
	  orig regexp-style --exclude to --rexclude

2008-06-11  Michal Ludvig  <michal@logix.cz>

	* S3/PkgInfo.py: Version 0.9.8-rc1

2008-06-11  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Remove python 2.5 specific code (try/except/finally 
	  block) and make s3cmd compatible with python 2.4 again.
	* s3cmd, S3/Config.py, s3cmd.1: Added --exclude-from and --debug-syncmatch
	  switches for sync.

2008-06-10  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Added --exclude switch for sync.
	* s3cmd.1, NEWS: Document --exclude

2008-06-05  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.7
	  ----------------------

2008-06-05  Michal Ludvig  <michal@logix.cz>

	* S3/PkgInfo.py: Bumped up version to 0.9.7
	* NEWS: Added 0.9.7
	* TODO: Removed completed tasks
	* s3cmd, s3cmd.1: Updated help texts, 
	  removed --dry-run option as it's not implemented.
	
2008-06-05  Michal Ludvig  <michal@logix.cz>

	* S3/Config.py: Store more file attributes in sync to S3.
	* s3cmd: Make sync remote2local more error-resilient.

2008-06-04  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Implemented cmd_sync_remote2local() for restoring
	  backup from S3 to a local filesystem
	* S3/S3.py: S3.object_get_uri() now requires writable stream 
	  and not a path name.
	* S3/Utils.py: Added mkdir_with_parents()

2008-06-04  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Refactored cmd_sync() in preparation 
	  for remote->local sync.

2008-04-30  Michal Ludvig  <michal@logix.cz>

	* s3db, S3/SimpleDB.py: Implemented almost full SimpleDB API.

2008-04-29  Michal Ludvig  <michal@logix.cz>

	* s3db, S3/SimpleDB.py: Initial support for Amazon SimpleDB. 
	  For now implements ListDomains() call and most of the 
	  infrastructure required for request creation.

2008-04-29  Michal Ludvig  <michal@logix.cz>

	* S3/Exceptions.py: Exceptions moved out of S3.S3
	* S3/SortedDict.py: rewritten from scratch to preserve
	  case of keys while still sorting in case-ignore mode.

2008-04-28  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py: send_file() now computes MD5 sum of the file
	  being uploaded, compares with ETag returned by Amazon
	  and retries upload if they don't match.

2008-03-05  Michal Ludvig  <michal@logix.cz>

	* s3cmd, S3/S3.py, S3/Utils.py: Throttle upload speed and retry 
	  when upload failed.
	  Report download/upload speed and time elapsed.

2008-02-28  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.6
	  ----------------------

2008-02-28  Michal Ludvig  <michal@logix.cz>

	* S3/PkgInfo.py: bumped up version to 0.9.6
	* NEWS: What's new in 0.9.6

2008-02-27  Michal Ludvig  <michal@logix.cz>

	* s3cmd, s3cmd.1: Updated help and man page.
	* S3/S3.py, S3/Utils.py, s3cmd: Support for 's3cmd info' command.
	* s3cmd: Fix crash when 'sync'ing files with unresolvable owner uid/gid.
	* S3/S3.py, S3/Utils.py: open files in binary mode (otherwise windows
	  users have problems).
	* S3/S3.py: modify 'x-amz-date' format (problems reported on MacOS X). 
	  Thanks Jon Larkowski for fix.

2008-02-27  Michal Ludvig  <michal@logix.cz>

	* TODO: Updated wishlist.

2008-02-11  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py: Properly follow RedirectPermanent responses for EU buckets
	* S3/S3.py: Create public buckets with -P (#1837328)
	* S3/S3.py, s3cmd: Correctly display public URL on uploads.
	* S3/S3.py, S3/Config.py: Support for MIME types. Both 
	default and guessing. Fixes bug #1872192 (Thanks Martin Herr)

2007-11-13  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.5
	  ----------------------

2007-11-13  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py: Support for buckets stored in Europe, access now 
	  goes via <bucket>.s3.amazonaws.com where possible.

2007-11-12  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Support for storing file attributes (like ownership, 
	  mode, etc) in sync operation.
	* s3cmd, S3/S3.py: New command 'ib' to get information about 
	  bucket (only 'LocationConstraint' supported for now).

2007-10-01  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Fix typo in argument name (patch
	  from Kim-Minh KAPLAN, SF #1804808)

2007-09-25  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Exit with error code on error (patch
	  from Kim-Minh KAPLAN, SF #1800583)

2007-09-25  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py: Don't fail if bucket listing doesn't have
	  <IsTruncated> node.
	* s3cmd: Create ~/.s3cfg with 0600 permissions.

2007-09-13  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Improved 'sync'
	* S3/S3.py: Support for buckets with over 1000 objects.

2007-09-03  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Small tweaks to --configure workflow.

2007-09-02  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Initial support for 'sync' operation. For
	  now only local->s3 direction. In this version doesn't
	  work well with non-ASCII filenames and doesn't support
	  encryption.

2007-08-24  Michal Ludvig  <michal@logix.cz>

	* s3cmd, S3/Util.py: More ElementTree imports cleanup

2007-08-19  Michal Ludvig  <michal@logix.cz>

	* NEWS: Added news for 0.9.5

2007-08-19  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Better handling of multiple arguments for put, get and del

2007-08-14  Michal Ludvig  <michal@logix.cz>

	* setup.py, S3/Utils.py: Try import xml.etree.ElementTree
	  or elementtree.ElementTree module.

2007-08-14  Michal Ludvig  <michal@logix.cz>

	* s3cmd.1: Add info about --encrypt parameter.

2007-08-14  Michal Ludvig  <michal@logix.cz>

	* S3/PkgInfo.py: Bump up version to 0.9.5-pre

2007-08-13  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.4
	  ----------------------

2007-08-13  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py: Added function urlencode_string() that encodes
	  non-ascii characters in object name before sending it to S3.

2007-08-13  Michal Ludvig  <michal@logix.cz>

	* README: Updated Amazon S3 pricing overview

2007-08-13  Michal Ludvig  <michal@logix.cz>

	* s3cmd, S3/Config.py, S3/S3.py: HTTPS support

2007-07-20  Michal Ludvig  <michal@logix.cz>

	* setup.py: Check correct Python version and ElementTree availability.

2007-07-05  Michal Ludvig  <michal@logix.cz>

	* s3cmd: --configure support for Proxy
	* S3/S3.py: HTTP proxy support from
	  John D. Rowell <jdrowell@exerciseyourbrain.com>

2007-06-19  Michal Ludvig  <michal@logix.cz>

	* setup.py: Check for S3CMD_PACKAGING and don't install
	  manpages and docs if defined.
	* INSTALL: Document the above change.
	* MANIFEST.in: Include uncompressed manpage

2007-06-17  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Added encryption key support to --configure
	* S3/PkgInfo.py: Bump up version to 0.9.4-pre
	* setup.py: Cleaned up some rpm-specific stuff that 
	  caused problems to Debian packager Mikhail Gusarov
	* setup.cfg: Removed [bdist_rpm] section
	* MANIFEST.in: Include S3/*.py

2007-06-16  Michal Ludvig  <michal@logix.cz>

	* s3cmd.1: Syntax fixes from Mikhail Gusarov <dottedmag@dottedmag.net>

2007-05-27  Michal Ludvig  <michal@logix.cz>

	* Support for on-the-fly GPG encryption.

2007-05-26  Michal Ludvig  <michal@logix.cz>

	* s3cmd.1: Add info about "s3cmd du" command.

2007-05-26  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.3
	  ----------------------

2007-05-26  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Patch from Basil Shubin <basil.shubin@gmail.com>
	  adding support for "s3cmd du" command.
	* s3cmd: Modified output format of "s3cmd du" to conform
	  with unix "du".
	* setup.cfg: Require Python 2.5 in RPM. Otherwise it needs
	  to require additional python modules (e.g. ElementTree)
	  which may have different names in different distros. It's 
	  indeed still possible to manually install s3cmd with 
	  Python 2.4 and appropriate modules.

2007-04-09  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.2
	  ----------------------

2007-04-09  Michal Ludvig  <michal@logix.cz>

	* s3cmd.1: Added manpage
	* Updated infrastructure files to create "better"
	  distribution archives.

2007-03-26  Michal Ludvig  <michal@logix.cz>

	* setup.py, S3/PkgInfo.py: Move package info out of setup.py
	* s3cmd: new parameter --version
	* s3cmd, S3/S3Uri.py: Output public HTTP URL for objects
	  stored with Public ACL.
	  
2007-02-28  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Verify supplied accesskey and secretkey
	  in interactive configuration path.
	* S3/Config.py: Hide access key and secret key
	  from debug output.
	* S3/S3.py: Modify S3Error exception to work
	  in python 2.4 (=> don't expect Exception is
	  a new-style class).
	* s3cmd: Updated for the above change.

2007-02-19  Michal Ludvig  <michal@logix.cz>

	* NEWS, INSTALL, README, setup.py: Added
	  more documentation.

2007-02-19  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py, s3cmd: New feature - allow "get" to stdout

2007-02-19  Michal Ludvig  <michal@logix.cz>

	* S3/S3fs.py: Removed (development moved to branch s3fs-devel).

2007-02-08  Michal Ludvig  <michal@logix.cz>

	* S3/S3fs.py: 
	  - Implemented mknod()
	  - Can create directory structure
	  - Rewritten to use SQLite3. Currently can create
	    the filesystem, and a root inode.

2007-02-07  Michal Ludvig  <michal@logix.cz>

	* s3cmd (from /s3py:74): Renamed SVN top-level project
	  s3py to s3cmd

2007-02-07  Michal Ludvig  <michal@logix.cz>

	* setup.cfg: Only require Python 2.4, not 2.5
	* S3/Config.py: Removed show_uri - no longer needed,
	  it's now default

2007-02-07  Michal Ludvig  <michal@logix.cz>

	* setup.py
	  - Version 0.9.1

2007-02-07  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Change all "exit()" calls to "sys.exit()"
	  and allow for python 2.4
	* S3/S3.py: Removed dependency on hashlib -> allow for python 2.4

2007-01-27  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py, S3/S3Uri.py: Case insensitive regex in S3Uri.py

2007-01-26  Michal Ludvig  <michal@logix.cz>

	* S3/S3fs.py: Added support for stroing/loading inodes.
	  No data yet however.

2007-01-26  Michal Ludvig  <michal@logix.cz>

	* S3/S3fs.py: Initial version of S3fs module. 
	  Can create filesystem via "S3fs.mkfs()"

2007-01-26  Michal Ludvig  <michal@logix.cz>

	* S3/BidirMap.py, S3/Config.py, S3/S3.py, S3/S3Uri.py,
	  S3/SortedDict.py, S3/Utils.py, s3cmd: Added headers with
	  copyright to all files
	* S3/S3.py, S3/S3Uri.py: Removed S3.compose_uri(), introduced
	  S3UriS3.compose_uri() instead.

2007-01-26  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py, S3/S3Uri.py, s3cmd: 
	  - Converted all users of parse_uri to S3Uri class API
	  - Removed "cp" command again. Will have to use 'put'
	    and 'get' for now.

2007-01-25  Michal Ludvig  <michal@logix.cz>

	* S3/S3Uri.py: New module S3/S3Uri.py
	* S3/S3.py, s3cmd: Converted "put" operation to use
	  the new S3Uri class.

2007-01-24  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py
	* s3cmd
	  - Added 'cp' command
	  - Renamed parse_s3_uri to parse_uri (this will go away anyway)

2007-01-19  Michal Ludvig  <michal@logix.cz>

	* setup.cfg
	* setup.py
	  - Include README into tarballs

2007-01-19  Michal Ludvig  <michal@logix.cz>

	* README
	  - Added comprehensive README file

2007-01-19  Michal Ludvig  <michal@logix.cz>

	* setup.cfg
	* setup.py
	  - Added configuration for setup.py sdist

2007-01-19  Michal Ludvig  <michal@logix.cz>

	* S3/Config.py
	* s3cmd
	  - Added interactive configurator (--configure)
	  - Added config dumper (--dump-config)
	  - Improved --help output

2007-01-19  Michal Ludvig  <michal@logix.cz>

	* setup.cfg
	* setup.py
	  Added info for building RPM packages.

2007-01-18  Michal Ludvig  <michal@logix.cz>

	* S3/Config.py
	* S3/S3.py
	* s3cmd
	  Moved class Config from S3/S3.py to S3/Config.py

2007-01-18  Michal Ludvig  <michal@logix.cz>

	* S3/Config.py (from /s3py/trunk/S3/ConfigParser.py:47)
	* S3/ConfigParser.py
	* S3/S3.py
	  Renamed S3/ConfigParser.py to S3/Config.py

2007-01-18  Michal Ludvig  <michal@logix.cz>

	* s3cmd
	  Added info about homepage

2007-01-17  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py
	* s3cmd
	  - Use prefix for listings if specified.
	  - List all commands in --help

2007-01-16  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py
	* s3cmd
	  Major rework of Config class:
	  - Renamed from AwsConfig to Config
	  - Converted to Singleton (see Config.__new__() and an article on
	    Wikipedia)
	  - No more explicit listing of options - use introspection to get them
	    (class variables that of type str, int or bool that don't start with
	    underscore)
	  - Check values read from config file and verify their type.
	  
	  Added OptionMimeType and -m/-M options. Not yet implemented
	  functionality in the rest of S3/S3.py

2007-01-15  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py
	* s3cmd
	  - Merged list-buckets and bucket-list-objects operations into
	    a single 'ls' command.
	  - New parameter -P for uploading publicly readable objects

2007-01-14  Michal Ludvig  <michal@logix.cz>

	* s3.py
	* setup.py
	  Renamed s3.py to s3cmd (take 2)

2007-01-14  Michal Ludvig  <michal@logix.cz>

	* s3cmd (from /s3py/trunk/s3.py:45)
	  Renamed s3.py to s3cmd

2007-01-14  Michal Ludvig  <michal@logix.cz>

	* S3
	* S3/S3.py
	* s3.py
	* setup.py
	  All classes from s3.py go to S3/S3.py
	  Added setup.py

2007-01-14  Michal Ludvig  <michal@logix.cz>

	* s3.py
	  Minor fix S3.utils -> S3.Utils

2007-01-14  Michal Ludvig  <michal@logix.cz>

	* .svnignore
	* BidirMap.py
	* ConfigParser.py
	* S3
	* S3/BidirMap.py (from /s3py/trunk/BidirMap.py:35)
	* S3/ConfigParser.py (from /s3py/trunk/ConfigParser.py:38)
	* S3/SortedDict.py (from /s3py/trunk/SortedDict.py:35)
	* S3/Utils.py (from /s3py/trunk/utils.py:39)
	* S3/__init__.py
	* SortedDict.py
	* s3.py
	* utils.py
	  Moved modules to their own package

2007-01-12  Michal Ludvig  <michal@logix.cz>

	* s3.py
	  Added "del" command
	  Converted all (?) commands to accept s3-uri
	  Added -u/--show-uri parameter

2007-01-11  Michal Ludvig  <michal@logix.cz>

	* s3.py
	  Verify MD5 on received files
	  Improved upload of multiple files
	  Initial S3-URI support (more tbd)

2007-01-11  Michal Ludvig  <michal@logix.cz>

	* s3.py
	  Minor fixes:
	  - store names of parsed files in AwsConfig
	  - Print total size with upload/download

2007-01-11  Michal Ludvig  <michal@logix.cz>

	* s3.py
	* utils.py
	  Added support for sending and receiving files.

2007-01-11  Michal Ludvig  <michal@logix.cz>

	* ConfigParser.py
	* s3.py
	  List all Objects in all Buckets command
	  Yet another logging improvement
	  Version check for Python 2.5 or higher

2007-01-11  Michal Ludvig  <michal@logix.cz>

	* ConfigParser.py
	* s3.py
	* utils.py
	  Added ConfigParser
	  Improved setting logging levels
	  It can now quite reliably list buckets and objects

2007-01-11  Michal Ludvig  <michal@logix.cz>

	* .svnignore
	  Added ignore list

2007-01-11  Michal Ludvig  <michal@logix.cz>

	* .svnignore
	* BidirMap.py
	* SortedDict.py
	* s3.py
	* utils.py
	  Initial import