2008-07-29 Michal Ludvig * Released version 0.9.8.3 ------------------------ 2008-07-29 Michal Ludvig * S3/PkgInfo.py: Bumped up version to 0.9.8.3 * NEWS: Added 0.9.8.3 2008-07-29 Michal Ludvig * S3/Utils.py (hash_file_md5): Hash files in 32kB chunks instead of reading it all up to a memory first to avoid OOM on large files. 2008-07-07 Michal Ludvig * s3cmd.1: couple of syntax fixes from Mikhail Gusarov 2008-07-03 Michal Ludvig * Released version 0.9.8.2 ------------------------ 2008-07-03 Michal Ludvig * S3/PkgInfo.py: Bumped up version to 0.9.8.2 * NEWS: Added 0.9.8.2 * s3cmd: Print version info on 'unexpected error' output. 2008-06-30 Michal Ludvig * S3/S3.py: Re-upload when Amazon doesn't send ETag in PUT response. It happens from time to time for unknown reasons. Thanks "Burtc" for report and "hermzz" for fix. 2008-06-27 Michal Ludvig * Released version 0.9.8.1 ------------------------ 2008-06-27 Michal Ludvig * S3/PkgInfo.py: Bumped up version to 0.9.8.1 * NEWS: Added 0.9.8.1 * s3cmd: make 'cfg' global * run-tests.sh: Sort-of testsuite 2008-06-23 Michal Ludvig * Released version 0.9.8 ---------------------- 2008-06-23 Michal Ludvig * S3/PkgInfo.py: Bumped up version to 0.9.8 * NEWS: Added 0.9.8 * TODO: Removed completed tasks 2008-06-23 Michal Ludvig * s3cmd: Last-minute compatibility fixes for Python 2.4 * s3cmd, s3cmd.1: --debug-exclude is an alias for --debug-syncmatch * s3cmd: Don't require $HOME env variable to be set. Fixes #2000133 * s3cmd: Wrapped all execution in a try/except block to catch all exceptions and ask for a report. 2008-06-18 Michal Ludvig * S3/PkgInfo.py: Version 0.9.8-rc3 2008-06-18 Michal Ludvig * S3/S3.py: Bucket name can't contain upper-case letters (S3/DNS limitation). 2008-06-12 Michal Ludvig * S3/PkgInfo.py: Version 0.9.8-rc2 2008-06-12 Michal Ludvig * s3cmd, s3cmd.1: Added GLOB (shell-style wildcard) exclude, renamed orig regexp-style --exclude to --rexclude 2008-06-11 Michal Ludvig * S3/PkgInfo.py: Version 0.9.8-rc1 2008-06-11 Michal Ludvig * s3cmd: Remove python 2.5 specific code (try/except/finally block) and make s3cmd compatible with python 2.4 again. * s3cmd, S3/Config.py, s3cmd.1: Added --exclude-from and --debug-syncmatch switches for sync. 2008-06-10 Michal Ludvig * s3cmd: Added --exclude switch for sync. * s3cmd.1, NEWS: Document --exclude 2008-06-05 Michal Ludvig * Released version 0.9.7 ---------------------- 2008-06-05 Michal Ludvig * S3/PkgInfo.py: Bumped up version to 0.9.7 * NEWS: Added 0.9.7 * TODO: Removed completed tasks * s3cmd, s3cmd.1: Updated help texts, removed --dry-run option as it's not implemented. 2008-06-05 Michal Ludvig * S3/Config.py: Store more file attributes in sync to S3. * s3cmd: Make sync remote2local more error-resilient. 2008-06-04 Michal Ludvig * s3cmd: Implemented cmd_sync_remote2local() for restoring backup from S3 to a local filesystem * S3/S3.py: S3.object_get_uri() now requires writable stream and not a path name. * S3/Utils.py: Added mkdir_with_parents() 2008-06-04 Michal Ludvig * s3cmd: Refactored cmd_sync() in preparation for remote->local sync. 2008-04-30 Michal Ludvig * s3db, S3/SimpleDB.py: Implemented almost full SimpleDB API. 2008-04-29 Michal Ludvig * s3db, S3/SimpleDB.py: Initial support for Amazon SimpleDB. For now implements ListDomains() call and most of the infrastructure required for request creation. 2008-04-29 Michal Ludvig * S3/Exceptions.py: Exceptions moved out of S3.S3 * S3/SortedDict.py: rewritten from scratch to preserve case of keys while still sorting in case-ignore mode. 2008-04-28 Michal Ludvig * S3/S3.py: send_file() now computes MD5 sum of the file being uploaded, compares with ETag returned by Amazon and retries upload if they don't match. 2008-03-05 Michal Ludvig * s3cmd, S3/S3.py, S3/Utils.py: Throttle upload speed and retry when upload failed. Report download/upload speed and time elapsed. 2008-02-28 Michal Ludvig * Released version 0.9.6 ---------------------- 2008-02-28 Michal Ludvig * S3/PkgInfo.py: bumped up version to 0.9.6 * NEWS: What's new in 0.9.6 2008-02-27 Michal Ludvig * s3cmd, s3cmd.1: Updated help and man page. * S3/S3.py, S3/Utils.py, s3cmd: Support for 's3cmd info' command. * s3cmd: Fix crash when 'sync'ing files with unresolvable owner uid/gid. * S3/S3.py, S3/Utils.py: open files in binary mode (otherwise windows users have problems). * S3/S3.py: modify 'x-amz-date' format (problems reported on MacOS X). Thanks Jon Larkowski for fix. 2008-02-27 Michal Ludvig * TODO: Updated wishlist. 2008-02-11 Michal Ludvig * S3/S3.py: Properly follow RedirectPermanent responses for EU buckets * S3/S3.py: Create public buckets with -P (#1837328) * S3/S3.py, s3cmd: Correctly display public URL on uploads. * S3/S3.py, S3/Config.py: Support for MIME types. Both default and guessing. Fixes bug #1872192 (Thanks Martin Herr) 2007-11-13 Michal Ludvig * Released version 0.9.5 ---------------------- 2007-11-13 Michal Ludvig * S3/S3.py: Support for buckets stored in Europe, access now goes via .s3.amazonaws.com where possible. 2007-11-12 Michal Ludvig * s3cmd: Support for storing file attributes (like ownership, mode, etc) in sync operation. * s3cmd, S3/S3.py: New command 'ib' to get information about bucket (only 'LocationConstraint' supported for now). 2007-10-01 Michal Ludvig * s3cmd: Fix typo in argument name (patch from Kim-Minh KAPLAN, SF #1804808) 2007-09-25 Michal Ludvig * s3cmd: Exit with error code on error (patch from Kim-Minh KAPLAN, SF #1800583) 2007-09-25 Michal Ludvig * S3/S3.py: Don't fail if bucket listing doesn't have node. * s3cmd: Create ~/.s3cfg with 0600 permissions. 2007-09-13 Michal Ludvig * s3cmd: Improved 'sync' * S3/S3.py: Support for buckets with over 1000 objects. 2007-09-03 Michal Ludvig * s3cmd: Small tweaks to --configure workflow. 2007-09-02 Michal Ludvig * s3cmd: Initial support for 'sync' operation. For now only local->s3 direction. In this version doesn't work well with non-ASCII filenames and doesn't support encryption. 2007-08-24 Michal Ludvig * s3cmd, S3/Util.py: More ElementTree imports cleanup 2007-08-19 Michal Ludvig * NEWS: Added news for 0.9.5 2007-08-19 Michal Ludvig * s3cmd: Better handling of multiple arguments for put, get and del 2007-08-14 Michal Ludvig * setup.py, S3/Utils.py: Try import xml.etree.ElementTree or elementtree.ElementTree module. 2007-08-14 Michal Ludvig * s3cmd.1: Add info about --encrypt parameter. 2007-08-14 Michal Ludvig * S3/PkgInfo.py: Bump up version to 0.9.5-pre 2007-08-13 Michal Ludvig * Released version 0.9.4 ---------------------- 2007-08-13 Michal Ludvig * S3/S3.py: Added function urlencode_string() that encodes non-ascii characters in object name before sending it to S3. 2007-08-13 Michal Ludvig * README: Updated Amazon S3 pricing overview 2007-08-13 Michal Ludvig * s3cmd, S3/Config.py, S3/S3.py: HTTPS support 2007-07-20 Michal Ludvig * setup.py: Check correct Python version and ElementTree availability. 2007-07-05 Michal Ludvig * s3cmd: --configure support for Proxy * S3/S3.py: HTTP proxy support from John D. Rowell 2007-06-19 Michal Ludvig * setup.py: Check for S3CMD_PACKAGING and don't install manpages and docs if defined. * INSTALL: Document the above change. * MANIFEST.in: Include uncompressed manpage 2007-06-17 Michal Ludvig * s3cmd: Added encryption key support to --configure * S3/PkgInfo.py: Bump up version to 0.9.4-pre * setup.py: Cleaned up some rpm-specific stuff that caused problems to Debian packager Mikhail Gusarov * setup.cfg: Removed [bdist_rpm] section * MANIFEST.in: Include S3/*.py 2007-06-16 Michal Ludvig * s3cmd.1: Syntax fixes from Mikhail Gusarov 2007-05-27 Michal Ludvig * Support for on-the-fly GPG encryption. 2007-05-26 Michal Ludvig * s3cmd.1: Add info about "s3cmd du" command. 2007-05-26 Michal Ludvig * Released version 0.9.3 ---------------------- 2007-05-26 Michal Ludvig * s3cmd: Patch from Basil Shubin adding support for "s3cmd du" command. * s3cmd: Modified output format of "s3cmd du" to conform with unix "du". * setup.cfg: Require Python 2.5 in RPM. Otherwise it needs to require additional python modules (e.g. ElementTree) which may have different names in different distros. It's indeed still possible to manually install s3cmd with Python 2.4 and appropriate modules. 2007-04-09 Michal Ludvig * Released version 0.9.2 ---------------------- 2007-04-09 Michal Ludvig * s3cmd.1: Added manpage * Updated infrastructure files to create "better" distribution archives. 2007-03-26 Michal Ludvig * setup.py, S3/PkgInfo.py: Move package info out of setup.py * s3cmd: new parameter --version * s3cmd, S3/S3Uri.py: Output public HTTP URL for objects stored with Public ACL. 2007-02-28 Michal Ludvig * s3cmd: Verify supplied accesskey and secretkey in interactive configuration path. * S3/Config.py: Hide access key and secret key from debug output. * S3/S3.py: Modify S3Error exception to work in python 2.4 (=> don't expect Exception is a new-style class). * s3cmd: Updated for the above change. 2007-02-19 Michal Ludvig * NEWS, INSTALL, README, setup.py: Added more documentation. 2007-02-19 Michal Ludvig * S3/S3.py, s3cmd: New feature - allow "get" to stdout 2007-02-19 Michal Ludvig * S3/S3fs.py: Removed (development moved to branch s3fs-devel). 2007-02-08 Michal Ludvig * S3/S3fs.py: - Implemented mknod() - Can create directory structure - Rewritten to use SQLite3. Currently can create the filesystem, and a root inode. 2007-02-07 Michal Ludvig * s3cmd (from /s3py:74): Renamed SVN top-level project s3py to s3cmd 2007-02-07 Michal Ludvig * setup.cfg: Only require Python 2.4, not 2.5 * S3/Config.py: Removed show_uri - no longer needed, it's now default 2007-02-07 Michal Ludvig * setup.py - Version 0.9.1 2007-02-07 Michal Ludvig * s3cmd: Change all "exit()" calls to "sys.exit()" and allow for python 2.4 * S3/S3.py: Removed dependency on hashlib -> allow for python 2.4 2007-01-27 Michal Ludvig * S3/S3.py, S3/S3Uri.py: Case insensitive regex in S3Uri.py 2007-01-26 Michal Ludvig * S3/S3fs.py: Added support for stroing/loading inodes. No data yet however. 2007-01-26 Michal Ludvig * S3/S3fs.py: Initial version of S3fs module. Can create filesystem via "S3fs.mkfs()" 2007-01-26 Michal Ludvig * S3/BidirMap.py, S3/Config.py, S3/S3.py, S3/S3Uri.py, S3/SortedDict.py, S3/Utils.py, s3cmd: Added headers with copyright to all files * S3/S3.py, S3/S3Uri.py: Removed S3.compose_uri(), introduced S3UriS3.compose_uri() instead. 2007-01-26 Michal Ludvig * S3/S3.py, S3/S3Uri.py, s3cmd: - Converted all users of parse_uri to S3Uri class API - Removed "cp" command again. Will have to use 'put' and 'get' for now. 2007-01-25 Michal Ludvig * S3/S3Uri.py: New module S3/S3Uri.py * S3/S3.py, s3cmd: Converted "put" operation to use the new S3Uri class. 2007-01-24 Michal Ludvig * S3/S3.py * s3cmd - Added 'cp' command - Renamed parse_s3_uri to parse_uri (this will go away anyway) 2007-01-19 Michal Ludvig * setup.cfg * setup.py - Include README into tarballs 2007-01-19 Michal Ludvig * README - Added comprehensive README file 2007-01-19 Michal Ludvig * setup.cfg * setup.py - Added configuration for setup.py sdist 2007-01-19 Michal Ludvig * S3/Config.py * s3cmd - Added interactive configurator (--configure) - Added config dumper (--dump-config) - Improved --help output 2007-01-19 Michal Ludvig * setup.cfg * setup.py Added info for building RPM packages. 2007-01-18 Michal Ludvig * S3/Config.py * S3/S3.py * s3cmd Moved class Config from S3/S3.py to S3/Config.py 2007-01-18 Michal Ludvig * S3/Config.py (from /s3py/trunk/S3/ConfigParser.py:47) * S3/ConfigParser.py * S3/S3.py Renamed S3/ConfigParser.py to S3/Config.py 2007-01-18 Michal Ludvig * s3cmd Added info about homepage 2007-01-17 Michal Ludvig * S3/S3.py * s3cmd - Use prefix for listings if specified. - List all commands in --help 2007-01-16 Michal Ludvig * S3/S3.py * s3cmd Major rework of Config class: - Renamed from AwsConfig to Config - Converted to Singleton (see Config.__new__() and an article on Wikipedia) - No more explicit listing of options - use introspection to get them (class variables that of type str, int or bool that don't start with underscore) - Check values read from config file and verify their type. Added OptionMimeType and -m/-M options. Not yet implemented functionality in the rest of S3/S3.py 2007-01-15 Michal Ludvig * S3/S3.py * s3cmd - Merged list-buckets and bucket-list-objects operations into a single 'ls' command. - New parameter -P for uploading publicly readable objects 2007-01-14 Michal Ludvig * s3.py * setup.py Renamed s3.py to s3cmd (take 2) 2007-01-14 Michal Ludvig * s3cmd (from /s3py/trunk/s3.py:45) Renamed s3.py to s3cmd 2007-01-14 Michal Ludvig * S3 * S3/S3.py * s3.py * setup.py All classes from s3.py go to S3/S3.py Added setup.py 2007-01-14 Michal Ludvig * s3.py Minor fix S3.utils -> S3.Utils 2007-01-14 Michal Ludvig * .svnignore * BidirMap.py * ConfigParser.py * S3 * S3/BidirMap.py (from /s3py/trunk/BidirMap.py:35) * S3/ConfigParser.py (from /s3py/trunk/ConfigParser.py:38) * S3/SortedDict.py (from /s3py/trunk/SortedDict.py:35) * S3/Utils.py (from /s3py/trunk/utils.py:39) * S3/__init__.py * SortedDict.py * s3.py * utils.py Moved modules to their own package 2007-01-12 Michal Ludvig * s3.py Added "del" command Converted all (?) commands to accept s3-uri Added -u/--show-uri parameter 2007-01-11 Michal Ludvig * s3.py Verify MD5 on received files Improved upload of multiple files Initial S3-URI support (more tbd) 2007-01-11 Michal Ludvig * s3.py Minor fixes: - store names of parsed files in AwsConfig - Print total size with upload/download 2007-01-11 Michal Ludvig * s3.py * utils.py Added support for sending and receiving files. 2007-01-11 Michal Ludvig * ConfigParser.py * s3.py List all Objects in all Buckets command Yet another logging improvement Version check for Python 2.5 or higher 2007-01-11 Michal Ludvig * ConfigParser.py * s3.py * utils.py Added ConfigParser Improved setting logging levels It can now quite reliably list buckets and objects 2007-01-11 Michal Ludvig * .svnignore Added ignore list 2007-01-11 Michal Ludvig * .svnignore * BidirMap.py * SortedDict.py * s3.py * utils.py Initial import