#===-- Makefile.config - Local configuration for LLVM ------*- Makefile -*--===#
 #
 #                     The LLVM Compiler Infrastructure
 #
 # This file is distributed under the University of Illinois Open Source
 # License. See LICENSE.TXT for details.
 #
 #===------------------------------------------------------------------------===#
 #
 # This file is included by Makefile.common.  It defines paths and other
 # values specific to a particular installation of LLVM.
 #
 #===------------------------------------------------------------------------===#
 
 # Define LLVM specific info and directories based on the autoconf variables
 LLVMPackageName   := @PACKAGE_NAME@
 LLVMVersion       := @PACKAGE_VERSION@
 LLVM_CONFIGTIME   := @LLVM_CONFIGTIME@
 
 ###########################################################################
 # Directory Configuration
 #	This section of the Makefile determines what is where.  To be
 #	specific, there are several locations that need to be defined:
 #
 #	o LLVM_SRC_ROOT  : The root directory of the LLVM source code.
 #	o LLVM_OBJ_ROOT  : The root directory containing the built LLVM code.
 #
 #	o PROJ_SRC_DIR  : The directory containing the code to build.
 #	o PROJ_SRC_ROOT : The root directory of the code to build.
 #
 #	o PROJ_OBJ_DIR  : The directory in which compiled code will be placed.
 #	o PROJ_OBJ_ROOT : The root directory in which compiled code is placed.
 #
 ###########################################################################
 
 PWD := @BINPWD@
 # Set the project name to LLVM if its not defined
 ifndef PROJECT_NAME
 PROJECT_NAME := $(LLVMPackageName)
 endif
 

 # The macro below is expanded when 'realpath' is not built-in.
 # Built-in 'realpath' is available on GNU Make 3.81.
 realpath = $(shell cd $(1); $(PWD))
 
 PROJ_OBJ_DIR  := $(call realpath, .)
 PROJ_OBJ_ROOT := $(call realpath, $(PROJ_OBJ_DIR)/$(LEVEL))

 
 ifeq ($(PROJECT_NAME),llvm)

 LLVM_SRC_ROOT   := $(call realpath, @abs_top_srcdir@)
 LLVM_OBJ_ROOT   := $(call realpath, @abs_top_builddir@)
 PROJ_SRC_ROOT   := $(LLVM_SRC_ROOT)
 PROJ_SRC_DIR    := $(call realpath, $(LLVM_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)))

 prefix          := @prefix@
 PROJ_prefix     := $(prefix)
 PROJ_VERSION    := $(LLVMVersion)
 else
 ifndef PROJ_SRC_ROOT
 $(error Projects must define PROJ_SRC_ROOT)
 endif
 ifndef PROJ_OBJ_ROOT
 $(error Projects must define PROJ_OBJ_ROOT)
 endif
 ifndef PROJ_INSTALL_ROOT
 $(error Projects must define PROJ_INSTALL_ROOT)
 endif
 ifndef LLVM_SRC_ROOT
 $(error Projects must define LLVM_SRC_ROOT)
 endif
 ifndef LLVM_OBJ_ROOT
 $(error Projects must define LLVM_OBJ_ROOT)
 endif

 PROJ_SRC_DIR := $(call realpath, $(PROJ_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)))

 prefix          := $(PROJ_INSTALL_ROOT)
 PROJ_prefix     := $(prefix)
 ifndef PROJ_VERSION
 PROJ_VERSION := 1.0
 endif
 endif
 
 LLVMMAKE := $(LLVM_SRC_ROOT)/make
 

 PROJ_bindir     := $(PROJ_prefix)/bin
 PROJ_libdir     := $(PROJ_prefix)/lib
 PROJ_datadir    := $(PROJ_prefix)/share
 PROJ_docsdir    := $(PROJ_prefix)/docs/llvm
 PROJ_etcdir     := $(PROJ_prefix)/etc/llvm
 PROJ_includedir := $(PROJ_prefix)/include
 PROJ_infodir    := $(PROJ_prefix)/info
 PROJ_mandir     := $(PROJ_prefix)/share/man

 
 # Determine if we're on a unix type operating system
 LLVM_ON_UNIX:=@LLVM_ON_UNIX@
 LLVM_ON_WIN32:=@LLVM_ON_WIN32@
 
 # Host operating system for which LLVM will be run.
 OS=@OS@
 HOST_OS=@HOST_OS@
 # Target operating system for which LLVM will compile for.
 TARGET_OS=@TARGET_OS@
 
 # Target hardware architecture
 ARCH=@ARCH@
 
 # Indicates, whether we're cross-compiling LLVM or not
 LLVM_CROSS_COMPILING=@LLVM_CROSS_COMPILING@
 
 # Executable file extension for build platform (mainly for
 # tablegen call if we're cross-compiling).
 BUILD_EXEEXT=@BUILD_EXEEXT@
 
 # Compilers for the build platflorm (mainly for tablegen
 # call if we're cross-compiling).
 BUILD_CC=@BUILD_CC@
 BUILD_CXX=@BUILD_CXX@
 

 # Triple for configuring build tools when cross-compiling
 BUILD_TRIPLE=@build@
 

 # Target triple (cpu-vendor-os) for which we should generate code
 TARGET_TRIPLE=@target@
 
 # Extra options to compile LLVM with
 EXTRA_OPTIONS=@EXTRA_OPTIONS@
 
 # Endian-ness of the target
 ENDIAN=@ENDIAN@
 
 # Path to the C++ compiler to use.  This is an optional setting, which defaults
 # to whatever your gmake defaults to.
 CXX = @CXX@
 
 # Path to the CC binary, which use used by testcases for native builds.
 CC := @CC@
 
 # Linker flags.
 LDFLAGS+=@LDFLAGS@
 
 # Path to the library archiver program.
 AR_PATH = @AR@
 AR = @AR@
 
 # Path to the nm program
 NM_PATH = @NM@
 
 # The pathnames of the programs we require to build
 CMP        := @CMP@
 CP         := @CP@
 DATE       := @DATE@
 FIND       := @FIND@
 GREP       := @GREP@
 INSTALL    := @INSTALL@
 MKDIR      := $(LLVM_SRC_ROOT)/autoconf/mkinstalldirs
 MV         := @MV@
 RANLIB     := @RANLIB@
 RM         := @RM@
 SED        := @SED@
 TAR        := @TAR@
 
 # Paths to miscellaneous programs we hope are present but might not be
 PERL       := @PERL@
 BZIP2      := @BZIP2@

 CAT        := @CAT@

 DOT        := @DOT@
 DOXYGEN    := @DOXYGEN@
 GROFF      := @GROFF@
 GZIP       := @GZIP@
 OCAMLC     := @OCAMLC@
 OCAMLOPT   := @OCAMLOPT@
 OCAMLDEP   := @OCAMLDEP@
 OCAMLDOC   := @OCAMLDOC@
 GAS        := @GAS@
 POD2HTML   := @POD2HTML@
 POD2MAN    := @POD2MAN@

 PDFROFF    := @PDFROFF@

 RUNTEST    := @RUNTEST@
 TCLSH      := @TCLSH@
 ZIP        := @ZIP@
 
 HAVE_PERL    := @HAVE_PERL@
 HAVE_PTHREAD := @HAVE_PTHREAD@
 
 LIBS       := @LIBS@
 
 # Targets that we should build
 TARGETS_TO_BUILD=@TARGETS_TO_BUILD@
 
 # Path to location for LLVM C/C++ front-end. You can modify this if you
 # want to override the value set by configure.
 LLVMGCCDIR := @LLVMGCCDIR@
 
 # Full pathnames of LLVM C/C++ front-end 'cc1' and 'cc1plus' binaries:
 LLVMGCC  := @LLVMGCC@
 LLVMGXX  := @LLVMGXX@
 LLVMCC1  := @LLVMCC1@
 LLVMCC1PLUS := @LLVMCC1PLUS@
 LLVMGCC_LANGS := @LLVMGCC_LANGS@
 

 # Information on Clang, if configured.
 CLANGPATH := @CLANGPATH@
 CLANGXXPATH := @CLANGXXPATH@
 ENABLE_BUILT_CLANG := @ENABLE_BUILT_CLANG@
 
 # The LLVM capable compiler to use.
 LLVMCC_OPTION := @LLVMCC_OPTION@
 

 # Path to directory where object files should be stored during a build.
 # Set OBJ_ROOT to "." if you do not want to use a separate place for
 # object files.
 OBJ_ROOT := .
 
 # What to pass as rpath flag to g++
 RPATH := @RPATH@
 
 # What to pass as -rdynamic flag to g++
 RDYNAMIC := @RDYNAMIC@
 
 # These are options that can either be enabled here, or can be enabled on the
 # make command line (ie, make ENABLE_PROFILING=1):
 
 # When ENABLE_OPTIMIZED is enabled, LLVM code is optimized and output is put
 # into the "Release" directories. Otherwise, LLVM code is not optimized and
 # output is put in the "Debug" directories.
 #ENABLE_OPTIMIZED = 1
 @ENABLE_OPTIMIZED@
 
 # When ENABLE_PROFILING is enabled, profile instrumentation is done
 # and output is put into the "<Flavor>+Profile" directories, where

 # <Flavor> is either Debug or Release depending on how other build
 # flags are set. Otherwise, output is put in the <Flavor>

 # directories.
 #ENABLE_PROFILING = 1
 @ENABLE_PROFILING@
 
 # When DISABLE_ASSERTIONS is enabled, builds of all of the LLVM code will
 # exclude assertion checks, otherwise they are included.
 #DISABLE_ASSERTIONS = 1
 @DISABLE_ASSERTIONS@
 
 # When ENABLE_EXPENSIVE_CHECKS is enabled, builds of all of the LLVM
 # code will include expensive checks, otherwise they are excluded.
 #ENABLE_EXPENSIVE_CHECKS = 0
 @ENABLE_EXPENSIVE_CHECKS@
 
 # When DEBUG_RUNTIME is enabled, the runtime libraries will retain debug
 # symbols.
 #DEBUG_RUNTIME = 1
 @DEBUG_RUNTIME@
 

 # When DEBUG_SYMBOLS is enabled, the compiler libraries will retain debug
 # symbols.
 #DEBUG_SYMBOLS = 1
 @DEBUG_SYMBOLS@
 

 # The compiler flags to use for optimized builds.
 OPTIMIZE_OPTION := @OPTIMIZE_OPTION@
 

 # When ENABLE_PROFILING is enabled, the llvm source base is built with profile
 # information to allow gprof to be used to get execution frequencies.
 #ENABLE_PROFILING = 1
 
 # When ENABLE_DOXYGEN is enabled, the doxygen documentation will be built
 ENABLE_DOXYGEN = @ENABLE_DOXYGEN@
 
 # Do we want to enable threads?
 ENABLE_THREADS := @ENABLE_THREADS@
 
 # Do we want to build with position independent code?
 ENABLE_PIC := @ENABLE_PIC@
 

 # Do we want to build a shared library and link the tools with it?
 ENABLE_SHARED := @ENABLE_SHARED@
 

 # Use -fvisibility-inlines-hidden?
 ENABLE_VISIBILITY_INLINES_HIDDEN := @ENABLE_VISIBILITY_INLINES_HIDDEN@
 

 # Do we want to allow timestamping information into builds?
 ENABLE_TIMESTAMPS := @ENABLE_TIMESTAMPS@
 

 # This option tells the Makefiles to produce verbose output.
 # It essentially prints the commands that make is executing
 #VERBOSE = 1
 
 # Enable JIT for this platform
 TARGET_HAS_JIT = @TARGET_HAS_JIT@
 

 # Environment variable to set to change the runtime shared library search path.
 SHLIBPATH_VAR = @SHLIBPATH_VAR@
 

 # Shared library extension for host platform.
 SHLIBEXT = @SHLIBEXT@
 
 # Executable file extension for host platform.
 EXEEXT = @EXEEXT@
 
 # Things we just assume are "there"
 ECHO := echo
 
 # Get the options for causing archives to link all their content instead of
 # just missing symbols, and the inverse of that. This is used for certain LLVM
 # tools that permit loadable modules. It ensures that the LLVM symbols will be
 # available to those loadable modules.
 LINKALL := @LINKALL@
 NOLINKALL := @NOLINKALL@
 
 # Get the value of HUGE_VAL_SANITY which will be either "yes" or "no" depending
 # on the check.
 HUGE_VAL_SANITY = @HUGE_VAL_SANITY@
 
 # Bindings that we should build
 BINDINGS_TO_BUILD := @BINDINGS_TO_BUILD@
 ALL_BINDINGS      := @ALL_BINDINGS@
 OCAML_LIBDIR      := @OCAML_LIBDIR@
 
 # When compiling under Mingw/Cygwin, executables such as tblgen
 # expect Windows paths, whereas the build system uses Unix paths.
 # The function SYSPATH transforms Unix paths into Windows paths.
 ifneq (,$(findstring -mno-cygwin, $(CXX)))
   SYSPATH = $(shell echo $(1) | cygpath -m -f -)
 else
   SYSPATH = $(1)
 endif
 
 # Location of the plugin header file for gold.
 BINUTILS_INCDIR := @BINUTILS_INCDIR@
 
 # When ENABLE_LLVMC_DYNAMIC is enabled, LLVMC will link libCompilerDriver
 # dynamically. This is needed to make dynamic plugins work on some targets
 # (Windows).
 ENABLE_LLVMC_DYNAMIC = 0
 #@ENABLE_LLVMC_DYNAMIC@
 
 # When ENABLE_LLVMC_DYNAMIC_PLUGINS is enabled, LLVMC will have dynamic plugin
 # support (via the -load option).
 ENABLE_LLVMC_DYNAMIC_PLUGINS = 1
 #@ENABLE_LLVMC_DYNAMIC_PLUGINS@

 
 # Optional flags supported by the compiler
 # -Wno-missing-field-initializers
 NO_MISSING_FIELD_INITIALIZERS = @NO_MISSING_FIELD_INITIALIZERS@
 # -Wno-variadic-macros
 NO_VARIADIC_MACROS = @NO_VARIADIC_MACROS@

 
 # Flags supported by the linker.
 # bfd ld / gold --version-script=file
 HAVE_LINK_VERSION_SCRIPT = @HAVE_LINK_VERSION_SCRIPT@